toolholder used for sale

Description: Lot of toolholder , HSK+C 63  , weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm

Description: Lot of toolholders , HSK+C 100,  ,40 weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm

Description: Lot of motorized toolholders  ,  ,  , weight approx.: 50 kg, Approx. Onsite Dimension. (l x w x h): 600 x 800 x 1,500 mm

Tool holder shaft type: BT 40 Tool holder shaft type:Futter / Chuck Tool holder shaft type:Thermoschrumpfung /Thermal shrinking Big selection of BT 40 Tool holders for sale. All kinds of Weldon, Collet, Chucker, thermal shrinking etc. available.

Tool holder type:Collet/ Spannzange ER 40 Tool holder shaft type:ISO 15488-40-A Shank diameter:60 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° rotary tool holder BMT 60 like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 20 Tool holder shaft type: ISO 15488-20-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm RPM of rotary tools:6000 1/min ratio:1:1 Coolant trough compatible up to:80 (ext.) bar Straight rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Spannzange / Collet ER 25 Tool holder shaft type: ISO 15488-25-A Shank diameter:40 mm ratio:1:1 RPM of rotary tools:6000 1/min Coolant trough compatible up to:80 (ext.) bar 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

Tool holder type:Weldon 16 mm Tool holder shaft type:DIN 69880 E2-40 x 16 Shank diameter:40 mm length:75 mm 90° angle rotary tool holder BMT 40 There are two units available. Both are like new and never used. External coolant up to 80 bar.

tool taper: 40 shaft cross cut:40 appr. 40 pieces axial driven tool taper with various cutters Used with Gildemeister GDM CNC lathe Sale as complete package or single, min. 5 pieces Price offered for complete package

tool taper:50 weight:0,04 t

tool taper:40 weight:0,1 t Appr. 60 ISO 40 NC arbors with various clamping shafts Package selling or individual possible, min. 5 pieces

pitch taper:50 Aufnahme Detailed price on request depense on version and nos. ca. 500 - 1500 EUR + VAT /piece Diverse toolholders matching SCHIESS-VTL´s with SK 50 taper and T-slot clamping design! Diverse fixed boring bars in different dia. and length. Diverse boring bar adapter plates to adapt different boring bars. Diverse normal toolholders for toolshank 40 mm in version left or right

tool clamping area:diverse mm weight:0,1 t appr. 45 ISO 40 arbors, package or single sale

tool clamping area:ISO 50 mm weight:0,15 t appr. 70 ISO 50 arbors, partly with cutters for sale single or in package

tool clamping area:ISO 50 mm weight:0,4 t single or package available. - appr. 75 tool arbors ISO 50 with partly tooling

weight:0,04 t Tool taper:CAPTO tool taper:ISO 40 appr. 60 ISO 40 NC tool holders with appr. 50 x C5 Capto, 5 x C6, 7 x C4. 10 x shaft bore For sale as package or individual

steel cabinet with diverse SK 40 toolholders

Description: 2 pcs. Tool holder, make unknown Tool holder carousel Diameter 580mm Height 1.50 m for 10 tool holders 7 rotatable weight approx.: 160 kg, Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,650 mm

Description: 42 pieces Toolhodler HSK 63 from different manufacturers misc. Interfaces like Shrink fit, collet and Weldon Transportdimensions: 1.200 x 800 x 400 mm, ca. 90 kg Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 400 mm, weight approx.: 70 kg

Description: 20 pieces Toolhodler VDI 40 from different manufacturers like mimatic, Eppinger and Zürn 5 pieces driven tool holder: 3 pieces angled and 2 pieces straight 15 pieces static tool holder with misc. Interfaces like boring bar, square cross and drill chuck The driven tools are suitable e.g. for Okuma lathes Transportdimensions: 800 x 600 x 400 mm, ca. 75 kg Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 60 kg

Description: 20 pieces Toolhodler VDI 40 from different manufacturers like WNT and Eppinger 5 pieces driven tool holder: 3 pieces angled and 2 pieces straight 15 pieces static tool holder with misc. Interfaces like boring bar, square cross and drill chuck The driven tools are suitable e.g. for Okuma lathes Transportdimensions: 800 x 600 x 400 mm, ca. 75 kg Approx. Onsite Dimension. (l x w x h): 800 x 600 x 400 mm, weight approx.: 60 kg

Live tools on all turrets (12 positions each turret) Y axis on all turrets High pressure system with cartridge filter - max 18 bar, swarf conveyeor TECNOFORME Auto shut off Bar loader interface Type G pick-up arm for sub-spindle including conveyor belt for finished parts External cleaning blow for spindle and counter spindle Internal cleaning jet with coolant for counter spindle Polygoning Monitoring of cutting forces and tool life Navigator system for fast search of the piece zero, work clamping, N° 1 collet chuck Hainbuch SPANNTOP ASA 8 GR. 80mm - main spindle, N° 1 collet chuck Hainbuch Axfix ASA 6 GR. 80mm - couter spindle, tool holders, Set of tool holders Marchetti consists of:, N° 1 cut-off tool holder with coolant supply, N° 2 boring bar holder 40mm internal coolant supply, N° 4 boring bar holder 32mm internal coolant supply, N° 2 duple toolholder for tool shaft  ...

TORNOS MICRO-8 CNC turning centre built in 2008 in Switzerland is distinguished by its extensive machining capabilities, sturdy design made of the highest quality cast iron and compact size. The machine designed for ultra-precise machining of workpieces with a maximum diameter of 10 mm is equipped with two reliable spindles to maximise production efficiency in any production facility, even during the most demanding challenges. The main spindle and counter spindle with integrated thermal control, retractable collet and ceramic ball bearing run on guides with increased rigidity. Both spindles are powered by reliable FANUC motors, ensuring that the necessary power is supplied for the versatile use of all the cutting tools located in the 20-position linear magazine. The arrangement of the tools in the magazine has been made in such a way as to allow simultaneous machining on the main spin ...

CITIZEN CINCOM M32 CNC turning center built in 2011 in Japan provides precision drilling, threading and turning of workpieces with a maximum diameter of 32 mm. To improve the machining process, the machine uses two spindles (main spindle and back spindle) with high rotational speed and power. A specially designed bed with high thermal stability further reduces the impact of heat during machining, increasing the life and reliability of all components. All machining parameters are programmed in the intuitive CINCOM SYSTEM M6D CNC control with many useful functions. Among the functions available, the controller allows, for example, self-diagnosis of the machine or program backup. High reliability, precision and extensive machining capabilities make the CITIZEN M32 III swiss-type lathe the ideal choice for even the most complex applications. The offer also includes extensive additional ...

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like mimatic, WNT and Zürn 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like Eppinger, Zürn, Garant 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 4 pieces cross beams with stations for Toolholder VDI 40 content consist of 40 pieces toolholder VDI 40 of misc. manufacturers like mimatic, Eppinger, Zürn, Holex 2 pieces driven tool holder (1x straight and 1x angled) suitable e.g. for Okuma lathes 38 pieces static tool holder with misc. Interfaces like boring bar, drill chuck and square cross v Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 240 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 220 kg

Description: Cabinet with sliding door 3 pieces cross beams with stations for Toolholder HSK 63 & SK 40 content consist of 36 pieces toolholder HSK 63 misc. Interfaces like Weldon, Shrink fit, collet and milling arbor Transportdimensions: 1.200 x 800 x 2.100 mm, ca. 180 kg Approx. Onsite Dimension. (l x w x h): 1,000 x 500 x 1,950 mm, weight approx.: 160 kg

turning diameter:900 turning length:1986 mm control:FANUC 18 iTB turning diameter over slide:680 mm turning speeds:1800 1/min turret (x-stations):12 power capacity:37 / 30 kW centre distance:2050 mm :1 / 12 x BMT :116 mm total power requirement:45 kW weight:15,0 t dimensions of the machine ca.:5,30 x 2,60 x 2,40 m Heavy CNC lathe with c Axis and driven tools tailstock chipconveyor driven tools ( on 6 stations ) hydraulic staedy hydraulic 3-chaw-juck Forkard 3FNC D= 500 mm oil mist manuals 15 sets of chaws 15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

turning diameter:900 turning length:1986 mm control:FANUC 18 iTB turning diameter over slide:680 mm turning speeds:1800 1/min turret (x-stations):12 power capacity:37 / 30 kW centre distance:2050 mm :1 / 12 x BMT :116 mm total power requirement:45 kW weight:15,0 t dimensions of the machine ca.:5,30 x 2,60 x 2,40 m Heavy CNC lathe with c Axis and driven tools tailstock tool eye chipconveyor driven tools ( on 6 stations ) hydraulic staedy hydraulic 3-chaw-juck D= 600 mm oil mist model IFM manuals 15 sets of chaws 15 pcs of toolholder 2 pcs of driven toolholder we have 2 machines of this model for sale !

Inlet cross-section: 3,000 x 2,000 mm Rotors: 2 pcs. Rotor flight circuit: 565 mm each Rotor version: 2 x 25 pcs. cutting plates on tool holders Drive: 4 x 45 kW Weight: approx. 18,000 kg Intake opening: 3,000 x 2,000 mm Rotor system: Twin rotor Rotor flight circle: 565 mm each Cutting system: 2 x 25 pcs. cutting inserts on toolholder Engine power: 4 x 45 kW Machine weight: approx. 18,000 kg

Inlet cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circuit: 380 mm Rotor speed: approx. 470 rpm Rotor design: 66 cutting plates on tool holders Screen version: solid screen basket, reinforced with ribs Sieblochung: 15 mm Counter knife: with cutting gap adjustment Machine weight: approx. 5,900 kg Intake opening: 1,200 x 1,600 mm Engine power: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Cutting system: 66 cutting inserts on toolholder Screen: reinforced screencage, 15 mm perforation Counter knife: with mechanical adjustment device Machine weight: approx. 5,900 kg

Description Digital display, route and position control HEIDENHAIN specifications: Traverse path x/Y/Z 400/410/400 mm Table size 800 x 450 mm Speed of 30 RPM/2240 Feed 1-750 mm / Rev Rapid traverse 2000 mm / min Toolholder SK 40

Spindle speed 4000 RPM Dialog 11 control Toolholder SK 40 Feed power consumption approx. 10 kVA Weight approx. 1400 kg traverse path X / Y / Z 307 / 303 / 400 mm Accessories: dividing attachment, coolant system, Electr. Handwheel

measuring range X-axis: 400 mm measuring range Y-axis: 400 mm Table dimensions: mm diameter: max. 350 mm weight of the machine ca.: 420 kg dimensions of the machine ca.: 1,23 x 0,75 x 1,91 m Control: Used Tool Presetter in very good condition. Checked by a factory mechanic. Test report available. Automatic measuring Pneumatically Activated Axis Movement Spindle Disk Brake Camera CCD LCD Monitor 22 Label Printer DYMO 1 off toolholder for HSK 32 Other tool holders in other sizes are available from the manufacturer. Axis Resolution 1µ Software: Speroni Pro Vision PC DELL Optiplex GX 745 – Pentium Dual-Core CPU E 5200 / 2,50 GHz, 1,00 GB RAM (PC was changed approx. 5 years ago) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM

Nr. 02 VERTICAL LATHES FAMAR MODEL: ERGO 230 SERIAL NUMBER: FAMAR NR. 20.09/1-20.09/2 SWITCHABLE Ø: 250 MM SWITCHABLE HEIGHT: 125 MM Ø SELF-CENTERING: 250 MM SPINDLE ATTACHMENT: 6 ASA ROTATIONAL SPEED: 6000 RPM TOOLHOLDER STATIONS: NR. 12 MOTORABLE: NR. 12. CONTROL: SIEMENS 810

MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM

Ø board: 1250 mm Maximum turnerable: 1500 mm Useful height: 1355 mm Vertical crossbar stroke: 800 mm Ram vertical stroke: 1000 mm Toolholder number: 15 Table pruned: 12000 kg CNC Tesla NS 642 C Fast: 8 m/min Power: 40 kW Weight: 27.2 ton

Code 71139 DESCRIPTION CNC Center lathe with 2 axis Make P B R Model T 30 SNC x 1500 S/N 30 H / 87 Year 1996 Control Siemens Sinumerik 805 Distance between centers 1500 mm Max. swing 630 mm Max. swing over slide 330 mm Spindle bore 105 mm Spindle speed in 2 ranges stepless ( in program ) 7 – 310 / 44 - 2000 rpm Motor power 15 kW Connected load 33 KVA Machine weight 5500 kg Accessories 8 ATC Duplomatic toolholder R 10 Hydraulic 3 chuck Ø 315 mm 1 fixed steady with 320 mm bore 1 open steady cooling equipment Condition Machine is in good condition

cutting diameter: 300 mm saw band length: 3270 x 27 x 0,9 mm cutting width: 420 mm feed per cut: 800 mm band speed: 35-70 m/min quick change toolholder: 300 capacity 90 degrees: square: 240 x 240 mm Capacity 90° rectangular: 420 x 200 mm : 240 mm : 230 mm Capacity 45° rectangular: 270 x 140 mm capacity 60 degrees: round: 165 mm capacity 60 degrees: square: 170 mm capacity 60 degrees: flat: 170 x 170 mm total power requirement: 0,9-1,5 kW weight of the machine ca.: 1090 kg dimensions of the machine ca.: 2800 2050 x 1900 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Deckel Maho DMU50e DMU 50 Evolution Max longitudinal travel X-axe: 500 mm Max cross-travel Y-axe: 420 mm Max travel Z-axe: 380 mm Power on spindle: 25/35 kW Type of millinghead: SK 40 Spindlespeeds: 20 > 18 000 rpm Table size: Ø 500 x 380 mm Control: Heidenhain Power needed: 38 kVa Length: 4000 mm Depth : 2500 mm Height: 2700 mm Weight: 5 ton Toolholder: yes Number of tools: 32 tools

DMG Deckel Maho DMU 60T X: 630 - Y: 560 - Z: 560 mm Max longitudinal travel X-axe: 630 mm Max cross-travel Y-axe: 560 mm Max travel Z-axe: 560 mm Power on spindle: 10/15 kW Admission in millinghead: SK 40 Spindlespeeds: 20 > 12 000 rpm Table size: 1000 x 600 mm Control: Heidenhain Length: 2800 mm Depth : 3490 mm Height: 2220 mm Weight: 7 ton Toolholder: yes Number of tools: 24 tools

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...

Manufacturer GEMINIS Model GHT-5 G2 1000 x 9000 Year 2.007 CNC HEIDENHAIN 4110 MANUAL PLUS Capacities and feeds Max. swing over Bed Ø 1.000 mm. Max. swing Ø 1.000 mm. Max swing over cross slide Ø 680 mm. Center height 500 mm. Distance between centres 9.000 mm. Rapid feed (X/Z) 8 m/min Main Spindle Turning speeds 0-1400 rpm Quill travel 102 mm. Spindle nose DIN-55026 -B11 Spindle automatic ranges 4 Main spindle power 37 kW Turret Turret positions 8 Turret type VDI 50 (Ø 470 mm) Driven tools power 5.5 kW Tailstock Tailstock quill travel 300 mm Ø tailstock quill 140 mm Max weight between centres Without steady rest 4.800 kg With 1 steady rest 5.500 kg With 2 steady rests 6.200 kg Extra Equipment C Axis and driven tools INCLUDED 1 Axial driven toolholder INCLUDED 2 radial driven toolholders INCLUDED 25 tool holders (VDI 50) INCLUDED 10 set of Jaws  ...

Nominal Turning Envelope Faceplate Diameter 4,000 mm Machining Diameter 4,250 mm Machining Heights 2,000 mm Work Piece Weight 20,000 kg X-Axis Ram Carriage From -300 mm To 2,850 mm W-Axis Elevating CrossRail 1.800 mm Z-Axis Ram 1,350 mm WorkTable Diameter 4,000 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 125,000 Nm WorkTable Milling Speed 0.02 to 1.5 rpm Milling Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm 2XRam Size Turning Milling 250X250 mm RAM cross section Tool shank size: ISO 50 Ram Spindle Speed 0 to 3,000 rpm Power Continuous S1 37 kW Torque Continuous S1 2.000 Nm Tool Storage And Interchange Number Of Tool Magazines one ATC for 12 turning and/or milling toolholder Tool Storage 12 X2 Maximum Singular Tool Weight 50 kg Maximum tool long 600 mm X and Z axes thrust Continuous S1 50,000 N X And Z-Axes ...

Fixed side at the left Panel thickness min/max: 16/45 mm Min. panel width: 150 mm Lateral panel support for panel width up to 900 mm Min/max. panel length: 700 / 3100 mm Max. laminate overhang: 110 mm Max. laminate thickness: 0,8 mm Radius min/max: 6 / 22 mm (depends the laminate) Feedspeed max. 18 m/min Top pressure by belt Equipment: Infeed fence, adjustable, defines the panel overhang 2 x trimming unit 0,4 kW, HSK 25 toolholder 1 x PVAc glue application 5 x glue nozzle, adjustable 1 x hot air blower 3 x IR heating on top (55 cm length), 3 x bottom (90 cm length) Postforming zone 1,8 m. length Various pre-installed profiling sets 1 x top trimmer 0,4 kW

Vertical Turning center SCR 45 – 2SF - Tech data Nominal Turning Envelope Faceplate Diameter 4.500 Machining Diameter 4.600 mm Machining Heights 1.800 mm Work Piece Weight 20,000 kg Nominal Travels X-Axis Rams Carriage 2,500 mm W-Axis Elevating Cross Rail 1,200 mm Indexing step 300 mm Z-Axis Ram vertical travel 1,250 mm Work Table WorkTable Diameter 4.500 mm WorkTable Speed 1 - 50 rpm Power Continuous S1 100 kW Torque Continuous S1 110,000 Nm WorkTable C axis 0.02 to 1.5 rpm Power Continuous S1 11 kW C axis Torque Continuous S1 55,000 Nm Locking Table Torque 80,000 Nm Z-Axis Milling Ram Ram Size Turning Milling 250 by 250 mm Turning / MillingTool type KM 63 - ISO 50 DIN 69871 Ram Milling Capability Ram Speed 0 to 2,500 rpm Power Continuous S1 40 kW Torque Continuous S1 1.400 Nm Toolchanger Number Of Tool Magazines two ATC for 12 turning ...