thickness used for sale

OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 400 mm   sheet thickness max.: 5 mm   coil weight max.: 4 to   feedstock transport direction: left to right COIL CHAIR   coil weight max.: 4 to   stroke: 550 mm DECOILER   sheet width max.: 400 mm   sheet width (min): 30 mm   max. diameter of coil: 1500 mm   mandrel expansion range from: 460 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 5 mm   sheet thickness min.: 0.5 mm   number of leveller rolls: 9   diameter of leveller rolls: 50 mm   diameter of feed rolls: 150 mm   feed velocity min.: 0 m/min   feed velocity max.: 50 m/min STRIP-FEEDER   feeder type: roll feeder   sheet width max.: 400 mm   ...

CONTROLS   PLC OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 500 mm   sheet thickness max.: 4 mm   coil weight max.: 10.5 to   feedstock transport direction: right to left COIL CHAIR   coil weight max.: 10.5 to   stroke: 750 mm DECOILER   design: single reel   sheet width max.: 500 mm   sheet width (min): 150 mm   coil weight max.: 10.5 to   max. diameter of coil: 2020 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm   feed velocity max.: 20 m/min CROP SHEAR   sheet thickness max.: 4 mm   working width max.: 530 mm   stroke rate (max.): 20 /min LEVELLER UNIT   sheet width max.: 500 mm   sheet width (min): 150 mm   sheet thickness max.: 4 ...

CONTROLS   PLC SIEMENS S7 300 OVERALL SPECIFICATIONS (COIL LINES)   sheet width max.: 350 mm   sheet thickness max.: 10 mm   coil weight max.: 3 to   feedstock transport direction: left to right DECOILER   design: single reel   sheet width max.: 350 mm   sheet width (min): 80 mm   coil weight max.: 3 to   sheet thickness max.: 12 mm   max. diameter of coil: 1500 mm   mandrel expansion range from: 470 mm   mandrel expansion range up to: 530 mm LEVELLER UNIT   sheet thickness max.: 10 mm   number of leveller rolls: 5   diameter of leveller rolls: 100 mm   number of infeed-/outfeed rolls: 2   diameter of feed rolls: 100 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency:  ...

Working width: 3200mm, max. sheet thickness at 400N/mm² with bending tool width 30mm: 4mm, min. bending radius: 1.25xsheet thickness, min. inner flange height: approx. 6xsheet thickness. Inner flange height: approx. 6xsheet thickness. Max. Opening height of upper beam: 400mm, max. adjustment range of bending and lower beam: 80mm, bending angle: 0°-180°, max. bending speed: 74°/s. Clamping speed upper beam DOWN/UP: 40mm/92mm, weight: approx. 5500kg, control: RAS System 6000, documentation available.

Cat-Nr. 12-2260 new Sugar Dissolving Tank with Cooling and Heating Jacket, with Insulation - 50.492 Litres in AISI 304 Product Thickness: 1,4 kg / Ltr – 65°C Working Pressure: pressureless Capacity: 50.492 Litres Material: V2A - AISI 304 Surface: 2B welding inside polished Insulation: in mineral wool thickness = 50 mm, completely in stainless steel and welded Thermoplate/Cooling Jacket H=5500 mm Thickness: 2.0 mm Working Pressure (Thermoplate/Cooling Jacket): max. + 3.0 bar – Medium: Water Upper and Lower Bottom: conical shape With manhole lid Diameter: 500 mm With inlet and outlet air controll With level indicator with borosilicate, scale With sample valve With spray head diameter 65 mm demountable with CIP pipe till the bottom of the cylinder + thread connector NW 80 With butterfly valve DN 65 for clear outlet With butterfly valve DN 65 for waste ou ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

410mm planing width electrical height adjustment of the Thicknesser table 3,7KW 5HP 400V 50 Hz star-triangle switch Dressing table length 2000 mm Thickness length 860 mm (890 mm) 4 Column guide in the thicknessing table Planing height 250 mm Dual hinged dressing tables Dressing Guide from 45 ° to 90 ° now only a short time in the price with 4 Tersa knife shaft Special price: NET 4990,- . Options: The comfort package NET 390,-contains Digital display of the thickness table setting 2 Advance speeds 6 and 12 m/1 Thickness Planer table extension 4,8KW 6.6 PS 400V 50 Hz star-triangle switch

1. STRIP WIDTH: 300-750 MM, THICKNESS: 0.2-1.5 MM, CAP.: 17500 T/A., MODERNISED: 1995 & 2005 2. LOOPING SLITTER, STRIP WIDTH: 200-356 MM; THICKNESS: 0.05-0.5 MM, CAP.: 5500 T/A., 3. STRIP WIDTH: 300-365 MM, THICKNESS: 0.5-2.0 MM, CAP.: 6500 T/A.

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...

Plasma cutting system for attachment/post-training CNC cutting and plasma cutting FineFocus 800 Plus Materialstaerke: up to 80 mm, hole stitching and quality cutting up to 45 - 50 mm, Gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Special price: 19,900 EUR + VAT ex works Bochum-Wattenscheid plasma cutting plants FineFocus 800or alternatively as FineFocus 1600 cutting up to 160 mm (see systems) plasma cutting systems FineFocus 800 and FineFocus 800/TWIN now with PLUS technology preferably for automated and mechanized cutting in connection with guide machines and robots on all electrically conductive materials; with or without vortex gas, also under water. cutting range up to a maximum of 80 mm material thickness (materi ...

Qty. 1 Second-hand continuous galvanising line Mfc.: POSCO Built: 1997 Capacity: approx. 100 000 per annum Strip width: 720 – 1250 mm Thickness: 0.2 – 1.6 mm De-Coiler ID 508 mm OD 2000 mm Weight: 20 Tons Finished product: Coil Strip width: 720-1250 mm Thickness: 0.2-1.6 mm ID 508 mm OD 1600 mm Weight: 10 Tons Sheet Strip width: 720-1250 mm Thickness: 0.2-1.6 mm Weight: 3 Tons Line speed Entry section: max. 150 m/min. Process section: max. 120 m/min. Exit section: Coiling max. 150 m/min. Shearing max. 100 m/min. Threading speed: 20 m/min. Coating method Both sides coating, Regular spangle Coating weight 120-500 g/m² based on both sides Post treatment Chromating Electricity High voltage 10 kV Low voltage 380 V AC, 3 ph., 50 Hz, 220 V AC, 1 ph. Water Pressure min. 3 kg/cm² Steam Pressure min. 5 kg/cm² Temperature min. 158 °C Production process Coil s ...

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Burner types: PT - 600 and PT - 15 XLS plasma power source: ESP 200; 100-160 volts; 40-200 A cutting method underwater Plasma cutting cutting table L:6,7xB:1,63xH0,79m Trafo ESAB ESP200 L:1,05xB:0,55xH:1.1m/330kg Portal; Rails x-way 7500 mm y-path 2700 mm Welding speed 2-750 IPM m/min Control CNC Vision 1000 cutting width y=max. 2438 mm thickness unleg. Steel=50.8 mm thickness of alloyed steel=38 mm thickness Alu=32mmmm burner cod1 piece Adjustment burner=approx. 150mmmm Total power requirement 39.8 kVA machine weight approx. 4.0; ready for immediate use

The LVD EHT DELTA 1250 RS TK turret punching machine was built in 1999. It is equipped with a MNC 32000 CNC control. The punching machine has a maximum pressure of 20 tons and allows the processing of a sheet with dimensions of 1250×1250 mm and a thickness of 4.5 / 6 mm. The machine performs a maximum of 650 beats per minute. The press is equipped with a hydraulic system, a turret with four stations (A, B, C, D) and a clearance adjustment sensor G8823142. Technical parameters: – CNC control: MNC 32000 – maximum pressing force: 20 tons – sheet dimensions X x Y: 1250 x 1250 mm – sheet thickness: 4.5 / 6 mm – maximum number of strokes: 650 1 / min – rated number of strokes: 300 1 / min – oil tank: 200 L – total power: 18.7 kW – engine: 11 kW – voltage: 400 V – weight: 17 tons Hydraulic System – Thick Turret: – instrumentation: station A, B, C, D  ...

Maximum paper size: 650 x 1020 mm Min. paper size: 140 x 140 mm Max sheet size: 300 x 410 mm Min. sheet size: 60 x 80 mm Film thickness: 0.05 - 0.2 mm Maximum working speed: 10,000 sheets / hour Board thickness: 200-400 g / m ² Corrugated board thickness: 6 mm Machine weight: 3.000 kg Dimensions: Length width 168,8 cm height 525,8 x 186 x Power: 9 kw

Capacity: 1 t Table length: 00 mm Table width: 0 mm Stroke: 0 mm CNC Model: 0 Motorised ram 80 mm Optional shrink & strech tools Foot switch to control ram Left & Right Number of strokes:      400Min. Maximum sheet thickness:2,5 mm Horizontal troath:      340mm Vertical troath:        245mm Max. thickness Stainles:1,5 mm Max. thickness Aluminium:2,5 mm Motorised ram adjustment:30 Power:                  1,6 kW Length:                 1.210 mm  Width:                  660 mm  Height:                 1.665 mm  Weight:                 370 kg 

Sheet thickness: 4,00 mm Bending length: 250 mm Number of rolls: 3   ROUNDO - PM-0 Quick rolling machine 250 x 4 mm MACH - ID 6320 Make: ROUNDO Type: PM-0 YOP: 1995 Rolling width    250 mm Rolling thickness 3  x toproll Ø4 mm Rolling thickness 5  x toproll Ø5 mm Top Roll Ø    100 mm Bottom Roll Ø  40 mm Number of rolls    3 Rolling speed     2/4 m/min Power      3.9 kW Dimensions Length      1.000 mm Width        1.900 mm Height       1.800 mm Weight       800 kg

TECHNICAL DATA: Work area: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 3,200 watts Maximum sheet thickness mild steel: 20 mm Maximum sheet thickness stainless steel: 12 mm Maximum sheet thickness aluminium: 8 mm STANDARD equipment: -Closed machine frame with integrated laser unit -Automatic pallet changer -TFT color display -Position laser diode -Spraying device -Motion unit for high-precision machining -Additional highly dynamic axis YP -Drives with maintenance-free AC servo motors -Closed beam delivery -Conveyor for small parts and waste -NitroLine -FlyLine -Infeed end detection TRUMPF LASER: -CO2 laser TruFlow 4000 -High-frequency excitation -Maintenance-friendly Turbo centrifugal blower -Gas mixer (integrated) -Laser power control -Logbook function laser CUTTING HEAD: -Laserschneidopf with 5 "lens -Laserschneidopf ...

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 600 mm MACH - ID 6281 Make: ECKOLD Type: KF 665 Kraftformer YOP: 2006 Number of strokes    150 / 300 / 600 Min. Maximum sheet thickness      8 mm Horizontal troath      675 mm Vertical troath          475 mm Max. thickness Stainles       4 mm Max. thickness Aluminium      8 mm Motorised ram adjustment        80 Power       4,1 kW Dimensions Length      2.250 mm Width        1.300 mm Height       2.250 mm Weight      2.150 kg

Capacity: 1 t Table length: 0 mm Table width: 0 mm Stroke: 150 mm ECKOLD - KF 460 Kraftormer KF 460 - 4 mm MACH - ID 6262 Make: ECKOLD Type: KF 460 YOP: 1980 Number of strokes    150 / 300 Min. Maximum sheet thickness      4 mm Horizontal troath      460 mm Vertical troath      475 mm Max. thickness Stainles     3 mm Max. thickness Aluminium    6 mm Motorised ram adjustment     60 Power      3,5 kW Dimensions Length    1.380 mm Width        650 mm Height     2.020 mm Weight      1.440 kg

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Laser cutting machine ECKERT DIAMENT FIBER 2 KW built in 2011. The machine worked for 2 years in one shift. Technical data of the laser cutter: - power: 2 kW - source: IPG - cutting head: Precitec - man hours: 8200 h - maximum cutting thickness, black steel: 12 mm - maximum cutting thickness, stainless steel: 8 mm - maximum cutting thickness, aluminum: 8 mm Machine equipment: - 2 exchangeable tables, dimensions: 1500 x 3000 mm - cooling system - filtration ventilation: the possibility of "return" of purified air to the hall or venting outside - additional software: Lantek Expert, used for nesting parts for cutting, allowing for the most effective use of material - an additional camera system that allows you to monitor the operation of the machine

Capacity: 13 t Stroke: 1500 mm Material thickness: 6 mm Diameter flange/disc maximum: 0 mm Day light: 0 mm MACH-id   4143 MAKE        ROUNDO Sweden TYPE          F 13 C YEAR         20... SPECIFICATIONS Throat        1500 mm Maximum sheet thickness Steel      13 mm Maximum sheet thickness Alu    15 mm Max. Bank ø in the gap       3000 mm Power         7.5 kW DIMENSIONS Length       3000 mm Width        2000 mm Height       2000 mm

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

X working range max .: 2500 mm Y Working range max .: 1250 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 2700 W Beam on: 21.335 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 3,75-Lense - Cutting head with 7.5-Lense - Cutting head quick change device - metal sheet position detection system - high dynamic Yp-axis - Laser position diode - Programmable cutting gas/Pressure setting - Microweld - SprintLas - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - shut-down automation - Safety light barriers - ToPs 100 lite programming system - online diagnose tool - RJ  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 15.151 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 9-Lense - Cutting head with 7.5-Lense - Cutting head with 3.75-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - PCS Process Control System (monitored piercing) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - autom. Injection cleaner - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Co ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

X working range max .: 4000 mm Y Working range max .: 2000 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 3200 W Beam on: 13.762 h Plate thickness St. Max .: 20 mm Plate thickness Va. Max .: 12 mm Plate thickness Al. Max .: 8 mm Standard equipment: - HI-LAS high-pressure-cutting - Cutting head with 5-Lense - Cutting head with 7,5-Lense - Cutting head quick change device - metal sheet position detection system - Laser position diode - programmable cutting-gas choice and pressure adjustment - Microweld - PMS Plasma Monitoring System - Sprint-Las - capacitive height regulation (DIAS III) - ContourLas - AutoLas Plus - Oil-Spray function - autom. Pallet-changing - lit working chamber - small parts/waste conveyor - multi-chamber suction system - Compact dust extractor - automatic switch-off - Safety Light Barriers - ToPs 100 lite programming system - tel ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 21.067 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard configuration - Closed machine frame with integrated laser unit - Automatic pallet changer - Conveyor belt for small parts / slug - Gantry drive in combination with direct linear drives - Universal quickchange device for cutting head - Lens cutting head with 250mm focal length - Programmable cutting gas pressure - ControlLine: automatic height control and sheet edge detection - AutoLas Plus (FocusLine) - Laser power control - Positioning laser diode - SprintLine (FastLine) - PMS (PlasmaLine) - Automatic metal sheet detection - PierceLine - Programmable power cycles - Work area lighting - Automatic shut-down devi ...

X working range max .: 6500 mm Y Working range max .: 200 mm Control: SIEMENS SINUMERIK 840D Laser power: 3600 W Beam on: 12.222 h Plate thickness St. Max .: 10 mm Plate thickness Va. Max .: 6 mm Plate thickness Al. Max .: 5 mm Standard configuration: Machine - Working range in X-axis for tubes 6500 mm - Outer circle diameter 200 mm - NitroLine - FocusLine - SprintLine - Laser power control - Programmable cutting gas pressure - Programm re-entry - Automatic shut-down device - Work area lighting Laser - Laser logbook function - Chiller Laser Cutting head - Lens cutting head with 155 mm focal length - ControlLine Controll - Sinumerik 840D - Teleservice Data Transfer - RJ45 network connection, USB-Interface Safety - CE marking - Multi-beam light barriers - Compact dust extraction unit 1500 Nm³/h - safety cabin with Macrolon panels Additional equ ...

Sheet thickness: 4,5 mm Bending length: 1270 mm Number of rolls: 3   A-Symetric rolls 700 N/mm2 Conical bending attachment Upper rolll swivabel Central lubrication   Rolling width:                 1270mm Rolling thickness 5x toproll Ø:4,5mm Rolling thickness prebending:  4,5mm Top Roll Ø:                    130mm Bottom Roll Ø:                 130mm Side roll Ø:                   130mm Number of rolls:               3 Rolling speed:                 6 M/Min Power:                         2,2kW Height:    &nb ...

The laser BYSTRONIC BYVENTION 3015 was manufactured in 2009 in Switzerland. The laser cutter is equipped with two cutting heads: 5 and 7.5 inches. Technical parameters : - laser source power: 2200 W - punching machine hours: 17487 h - 2 cutting heads: 5 and 7.5 inches - maximum size of the processed sheet: 3000 x 1500 mm - maximum cutting thickness, black steel: 8 mm - maximum cutting thickness, stainless steel: 6 mm - maximum cutting thickness, aluminum: 4 mm

TECHNICAL DATA: Working area 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840 D Laser power 5,000 watts Max. sheet thickness structural steel 25 mm Max sheet thickness stainless steel 20 mm Max sheet thickness aluminium 12 mm Machine regularly serviced by TRUMPF! Standard: - Closed machine frame with integrated laser unit - TRUMPF laser TLF 5000 - Laser unit: CO2 laser, high-frequency excited, maintenance-free turboradial blower, cooling unit, logbook function - Automatic pallet changer and longitudinal conveyor belt - Drives: Gantry drive in combination with linear direct drives - Laser power control - Position laser diode - HI-LAS high-pressure cutting - Plasma sensor inges, PMS - Automatic sheet metal edge detection - Programmable performance cycles - Microweld - Automatic nozzle cleaning - Fast editing with SprintLas - ContourLas for making small ho ...

CNC profiling and cut-to-length line make RAS type 29.17 line 2005serial no. 10/1, year of construction 2001consisting of:a)Sheet metal/strip straightening machine RAS type 26.45, built in 2001Sheet thickness (galvanized sheet steel up to 400N/mm2): 0.5 - 1.25 mmBelt width: 500 - 1500 mmStraightening speed: 0.9 - 15 m/min.Number of straightening rollers: 6 piecesNumber of take-off rollers: 4.8 kWWeight approx.: 2.1 twith movable control panelb)Roll feeder RASBelt width :500 - 1500 mmMax. feed length: 9999.99 mmFeed accuracy per 1000 mm: 0.2 mmDrive power: 1.8 kWWeight approx.: 1250 kgwith curved infeed roller conveyorc)Cut-to-length guillotine shears RAS type 82.16, built in 2001Max. cutting length: 1640 mmMax. sheet thickness: 2.0 mmCutting angle: 1.36°Strokes per minute: 63Stand projection: 100 mmsmallest remaining strip: 35 mmTable height: 750 mmDrive power: 3.0 kWWeight approx.: 950 ...

Z-profiling machine make probably SCHECHTL / HEIDT type SZP 250Technical specifications:Working width: 2500 mmSheet thickness St.:0.5 - 1.5 mmSheet thickness VA:0.4 - 1.0 mmSheet thickness aluminium: 0.4 - 1.0 mmRoller distance: 160 mmNumber of profile rollers:15Profiling height: 3 - 7 mmThroughput speed: 20 m/min.Drive power: 2.0 kWWorking height: 890 mmApprox. weight: 880 kgExternal dimensions approx.: 3200 x 1040 x 1290 mmwith- Forward and reverse switch- support table- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Used machine in good condition. Available for immediate delivery. - Laser Type: CO2 - Working area (X x Y x Z): 6.000 x 2.000 x 115 mm - Max. workpiece weight: 2.800 kg - Positioning speed X/Y: 200 m/min - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 31.581 h - Beam ON Working hours: 13.734 h - Electric consumption entire unit: 33 - 67 kW - Weight: 21.500 kg - Dimensions (long x wide x high): 16.100 x 5.200 x 2.000 mm

LoadMaster - Laser Type: CO2 - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 710 kg - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 4 kW - Maximum material thickness mild steel: 20 mm - Maximum material thickness stainless steel: 15 mm - Maximum material thickness aluminium: 10 mm - Control: SINUMERIK 840D - Machine ON Working hours: 47.940 h - Beam ON Working hours: 25.318 h - Weight: 11.500 kg - Dimensions (long x wide x high): 9.300 x 4.600 x 2.000 mm

- 115mm cutting head. - Conveyor belt on the right. - Nozzle changer. - Pedestal version. - Preparation for connection to LoadMaster. - Warehouse interface - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.800 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 64.524 h - Beam ON Working hours: 40.119 h - Weight: 12.000 kg - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm - Electric consumption entire unit: 32 kW

with LoadMaster - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.100 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 7 kW - Maximum material thickness mild steel: 30 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 20 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 57.859 h - Beam ON Working hours: 18.000 h - Electric consumption entire unit: 35 kW - Dimensions (long x wide x high): 11.000 x 4.600 x 2.400 mm - Weight: 12.000 kg

Motorized swivel bending machine make HERA type UM III 2500 x 5 mmMachine -No: 2013Technical specifications:Working width 2500 mmMax. Sheet thickness 3.0 mmSmallest shelf height with the greatest sheet thickness 16 mmsmallest inner bending radius with the greatest sheet thickness 4.5 mmMax. Opening width of the upper beam 350 mmMax. Adjustability of the lower andFolding beam 125 mmlargest diameter when rounding 250 mmWeight approx 3100 kgMotor power 5.5 HPWith- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

with LoadMaster - Laser Type: CO2 TruFlow - Working area (X x Y x Z): 3.000 x 1.500 x 115 mm - Max. workpiece weight: 1.800 kg - Simultaneous positioning speed: 300 X+Y m/min - Laser Output: 6 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 25 mm - Maximum material thickness aluminium: 15 mm - Control: SIEMENS SINUMERIK 840D - Machine ON Working hours: 75.000 h - Beam ON Working hours: 18.622 h - Dimensions (long x wide x high): 8.800 x 4.800 x 2.400 mm - Electric consumption entire unit: 32 kW - Weight: 12.000 kg

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

- High speed X and Y linear motors. - Automatic nozzle change. - Head with a single lens. - Laser Type: CO2 - Working area (X x Y x Z): 3.050 x 1.600 x 150 mm - Max. workpiece weight: 900 kg - Positioning speed X/Y: 170 m/min - Simultaneous positioning speed: 240 X+Y m/min - Laser Output: 5 kW - Maximum material thickness mild steel: 25 mm - Maximum material thickness stainless steel: 20 mm - Maximum material thickness aluminium: 12 mm - Control: PRIMACH-30L Controller - Machine ON Working hours: 14.738 h - Beam ON Working hours: 6.500 h - Power: installed max: 90 kW - Dimensions (long x wide x high): 9.700 x 3.600 x 2.600 mm - Weight: 15.000 kg

4-side squaring and edge banding line Machine 1: Fixed side right, moving side left Rolling chain, feed 10 - 40 m/min Controlls NC 21 Panel thickness 8 - 60 mm Max. panel width 1500 mm Edges: coil 0,3 - 3 mm, strips 0,4 - 20 mm Entry fence for veneered panels Equipment: 1+1 Compact-twin hogger, 2 motors 6,6 kW 1+1 Compact hot melt unit A20 with panel edge pre-heating, glue roller Q34, twin coil magazine, lateral pressure rollers C including anti-stick application 1+1 Free space for solid wood edges up to 2,54 m length 1+1 Rough trimming, 2 x 1,5 kW 1+1 Fine- or radius trimming, 2 x 0,4 kW (edges up to 6 mm) 1+1 Universal shaper 8,1 kW 1+1 Universal shaper 8,1 kW 1+1 Edge sander KS 10 1+1 Disc sander DS 40 1+1 Disc sander DS 40 Angular transfer to the right, TWR 24/30/12/S Panel sizes: width 250 - 1200 mm, length 250 - 3000 mm, thickness 8 - 45 mm Machine 2 Machine II + infeed magazine TW ...

Used machine in good condition. Available for immediate delivery. - Working area (X x Y x Z): 2.500 x 1.250 x 115 mm - Laser Type: CO2 - Positioning speed X/Y: 60 m/min - Simultaneous positioning speed: 85 X+Y m/min - Laser Output: 1,8 kW - Maximum material thickness mild steel: 12 mm - Maximum material thickness stainless steel: 4 mm - Maximum material thickness aluminium: 3 mm - Control: SINUMERIK 840 D - Consumption values CO2: 1 l/h - Consumption values N2: 6 l/h - Consumption values He: 13 l/h - Machine ON Working hours: 43.950 h - Beam ON Working hours: 23.696 h - Weight: 7.900 kg - Dimensions (long x wide x high): 7.100 x 5.900 x 2.000 mm

ERMAK CNC HVR 3100 x 13 hydraulic guillotine shears built in Turkey in 2008, are designed for cutting workpieces made of among others mild steel or stainless steel. The metal sheet with a maximum length of 3100 mm and a maximum thickness of 8 mm (plain steel) or 13 mm (stainless steel), is held during machining by 14 hydraulic clamps. The angle of the cutting blade can be freely adjusted in the range from 0.5° to 2.0°. Full control over the operation of the CNC HVR 3113 machine is guaranteed by the control panel located on the guillotine shears body with installed CYBELEC DNC 60 CNC controller, allowing programming of many different machining processes. The guillotine shears is equipped with among others new cutting blades and a foot control pedal, making the operator’s work much more comfortable and simple. The total weight of the machine is 13400 kg. The total weight of the mach ...