tainless steel plate used for sale

coordinate tableTable size: 625 x 315 mmTable longitudinal path: 450 mmCross table travel: 350 mmTable height: 180 mmOutside dimensions approx: 930 x 800 x 180 mmWith- Delivery spindlesNominal power for X + Y- T-slots- very accurate executionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Torque wrench make STAHWILLE type manoscope 721 NF / 80Fabr -No: 202318024Scale range: 160 - 800 NmScale range: 120 - 600 ft. LbScale division: 20 NmScale: 20 ft. LbSocket Square: 3/4 B 46.5 mmB 76 mmTotal length: 1040 mmWith- triggering- comfortable setting- double stop signal- Double scale Nm / ft. lb- Left suit by removable square- Protection of all sensitive parts by the robust steel tube in aluminum U profilevery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions: 1500 x 1000 x 210/40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

tiltable electromagnet clamping plateClamping area: 900 x 200 mmHeight: 65/105 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Directional plate made of cast ironDimensions 4000 x 1200 x 300/40 mmWithout feedusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

T-slot platen made of cast ironTechnical specifications:Length: 1200 mmWidth: 1000 mmSolid thickness: 60 mmRibbed thickness: 150 mmWith- 6 longitudinal T-slots 26/16 mm- baseused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Cast iron plateTechnical specifications:Length: 1200 mmWidth: 800 mmSolid plate thickness: 50 mmRibbed panel thickness: 150 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Older four-roll round bending machine make unknownTechnical specifications:Working length: 1000 mmRoll diameter: 100 mmmax.sheet thickness: 3-4 mmExternal dimensions L x W x H: 2550 x 1250 x 1250 mmWith:- Swiveling top rollerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Four-roller bending machine make FACCIN type 4 HCI/V2100X6/4Ser-No: 87100480-0526Technical specifications:max. bending length: 2100 mmBending sheet thickness: 6.0 mmRoller diameter: 185mmDrive power: 5.5 kWWeight approx.: 6000 kgDimensions approx.: 1500 x 1500 x 4000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Bending Machine Fabr. FASTI Type 104-20-1Machine -No: 9314008 Year 1993Effective length: 2040 mmSheet thickness: 1.0 mmRoll diameter: 80 mmMotor power: 1,1 kWWeight approx: 660 kgWith- CNC Control- 4 different cambered rollersxa0xa0 for extremely precise tube productionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-roll bending machine make SCHÄFER type SRMVS 1500/13Masch. -No: 3522 1500/15 / 8,5 / 7 built in 1971Bending length: 1540 mmMax. Sheet thickness: 13 mmBending capacity ST / VA: 8.5 / 7.0 mmRoll diameter: 200 mmExternal dimensions approx. 4000 x 1300 x 1900 mmWeight approx. 5,0 tWith- 3 rollers driven- all 3 rollers mot. adjustable- Mot. obliquely adjustable bottom rollers- suitable for conical bending- Folding bearing mounting by hand- sep. mobile control panelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy, older motorized three-roll bending machine Fab. UNKNOWNTechnical specifications:Working length: 1500 mmMax. Bending strength: 5.0 mmRoller diameter: 145/130/165 mmlower roller with grooves spaced: 50 mm apartDrive power: 5.0 kWWeight approx: 1.0 tExternal dimensions approx .: 2600 x 1250 x 1400 mmWith- swiveling top roller- Emergency stop switch- R + L run- Conical roundsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Three-roll bending machine make MG type MG 108 AMachine -No: 01226 built in 2002Technical specifications:max. bending length: 1050 mmSheet thickness max.: 12 mmSheet thickness max.: 8 mm for NiRoTop roller diameter: 140 mmBottom roll diameter: 140 mmMin drm. 230mm at :5mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Capacity : 2 x 4000 l/h - Inlet temperature : + 40°C - Outlet temperature: + 20°C - Cooling liquid temperature: approx. 7°C - 2 plate compartments for cooling 2 products simultaneously and individually - With control for 2 independent circuits

Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.

Max size 260 x 380 mm Details with hot foil attachment with foil pull and heating element Available direct

From original template directly onto plate. fully automatic! The original is exposed via lens system onto a printing-plate roll. Plate is automatically cut and developed - ready for direct use on Rotaprint.

Plate max width 650 mm Plate min length 460 mm Weight 150 kg Current 220V 7.5 Amp, 1.5 kW Working Dims W107 x D180 x H106cm Packaging Dims W107 x D100 x H106cm

cleaned & checked 220 Volt / 1500 Watt / 50-60 cycles (Hz)

Offer 08533 Measurement.- Richt. and welding plate Specifications: - Length approx. 2000 mm - Width approx. 1500 mm - Material thickness of the upper plate approx. 40 mm - Total height of the ribbed plate approx. 180 mm - Total height plate with steel base approx. 850 mm - Weight approx. 1800 kg

Granite measuring plate vibration insulated Measuring plate made of grey-black granite as a basis for assembly, control and laboratory purposes Outer edges visible ground Stainless threaded and fitting holes Base with vibration insulation (diaphragm air spring insulators) Plate size 2000 x 1450 x 400 mm (WxDxH) Weight approx. 4000 kg

Sell a new Erowa angle head, this comes from a measuring machine and is therefore still very well preserved. No cooling medium or other liquid treatment. approx. dimensions 100mm100mm160mm high

M. No.: 3839/11

Technical data approx. : - Perforated plate length 9.0 m - Perforated plate width 1.5 m - Total height perforated plate with ribbing 200 mm - Top plate thickness perforated plate 80 mm - Table height with base 0.85 m - Through holes 40 mm - Distance of the holes from the outer edge plate 60 mm - Center distance between the holes 125 mm - Steel plate length ( without holes ) 3.1 m - Steel plate blade ( without holes ) 1.35 m - Total – Length approx. 12.5 m - Total - Width approx. 1.8 m - Weight approx. 17 T

Thyssen measuring plate / control plate made of natural hard rock Thyssen measuring plate made of hard rock (granite slab) Length: 4000 mm Width: 1500 mm Thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 20 μm Actual value 19.5 μm Underframe Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Find more measuring plates in other sizes - new and used - More measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!

TABLE PLATE PUNCH G2.090.9041/018 FOR SM 52 M. No.: 759/15

Haeusler 4 Roll Double Initial Pinch Hyd Plate Roll Model: VRM-HY Number of Driven Rolls: 4 Length of Rolls: 122.04" / 3100mm Capacity Pre Bend: 3.5" / 90mm Capacity: Rolling: 3.9" / 100mm Roll Diameter (Top): 31.1" / 790mm Roll Diameter (Bottom): 31.1" / 790mm Roll Diameter (Side): 23.6" / 600mm Roll Diameter (Spare Top): 25.5" / 650mm Main Motor Drive: 215 HP / 160kW Equipped With Double Initial Pinch Hydraulic Drop End Hydraulic Tilt of Top Roll Hydraulic Positioning of Side Rolls Top/Bottom Driven Via Cardon Shaft Drives to Gear Box Spare 25" / 650mm Top Roll For Smaller Diameter Rolling Set up for Hot Rolling

length: 1800 mm width: 430 mm work height max.: 700 mm total power requirement: kW weight of the machine ca.: 300 Kg dimensions of the machine ca.: 1,9 x 0,5 x 0,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

3-D coordinate measuring machine ZEISS NUMEREX Granite measuring plate, granite measuring plate, measuring table Model No. 3648-18, Serial. No. X-1019, year of construction approx. 1986 Measuring range X = approx. 1250 mm, Y = approx. 900 mm, Z = approx. 400 mm Measuring plate L x W 1525 x 1435 mm Usable area 1525 x 1100 mm Measuring plate thickness 305 mm Passage width in the portal 1100 mm Probe holder 9.5 mm Compressed air connection 6 bar Mains connection 230 Volt, 50 Hz. - Granite plate with steel inserts with internal thread - Axis adjustment with pneumatic sliding guide for X, Y and Z-axis - Plate on base frame with 5 pieces of adjustable feet, 3 pieces support plate for the adjustable feet - Computer and software missing (not available and not included) Space requirement of the measuring machine L x W x H 1600 x 1850 x 2200 mm Weight of the machine approx. 2.8 ton. Plate damage ...

Straightening and welding plate, cast strongly ribbed Length 1000 mm Width 750 mm Thickness 110 mm Working height 810 mm Top thickness without ribs 34 mm - 3 pieces height-adjustable support points between table and metal base - simple metal base Weight approx. 280 kg; used

- Type: BR 4500/600 - Power: 122 kW - Voltage: 380 V. - Frequency: 50 Hz. - Weight: 2650 kg. - Amperage: 186.9 A - Transport speed: 1.02 - 10.8 m/min - Maximum oil level (above the conveyor): 20 mm.

Pressure plate stacker Grafoteam PST 26; good condition; cleaned and tested; new engine; .max. Panel size 820x780mm, min.324x394mm. Plate stacker Grafoteam PST 26; good condition; cleaned and checked; New Arm Motor; Max.plate size 820x780mm, min.324x394mm.

Fuji CR System FCR Profect CS with: Reader IR 363 First processing station 5 IP Cassettes Type CC/ 10 IP Cassettes Type C_verschiedene sizes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "as-is" condition ex warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without warranty. • To restart the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuration of the system or plant components must be carried out by the manufacturer or by a sp ...

Double disc grinding machine

Pressure plate stacker Grafoteam PST 26 C 580; condition outdated; .max. Panel size 580x820mm, min.240x240mm; Speed adjustable; Height adjustable. Plate stacker Grafoteam PST 26 C 580; codition rebuilt; max.plate size 580x820mm, min.240x240mm; adjustable in speed; adjustable in hight.

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

Servo Drives 9400, incl. Backplane, original paked, E94APNE0364, Lenze, new Attention: Original Lenze product - No replica from… Consists of: - Servo drives, Multi drives, 9400, E94APNE0364-P036, Lenze - E94AZPP0364N mounting plate - incl. manual Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Function warranty! For second hand parts, we can not provide a conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

High-speed high-temperature system with adjustable heat holder The machine can be started in a closed system or via supply tanks with pump control. Control via Siemens S7

Length: 5000 mm Width: 2000 mm Height: 400 mm

3100 x 6 mm CNC Cybelec with pneum. Sheet metal holding approx. 8000 kg

offer 22599 Technical data approx.: - working width 1020 mm - material thickness at 40 kg/mm² strength 1.5 mm -one. Backgauge adjustable up to 550 mm - front angle stop - Sheet metal hold-down - Table size 1100 x 650 mm - Working height 800 mm - Space requirement approx. W 1800 x H 1100 x D 850 mm - Weight approx. 400 kg

Plate length: 7000 mm Plate width: 2400 mm Plate thickness: 4100 mm Number of T-slots: 8   Size T-slots: 300 mm Type of material: metal   Floorplate Length:              7000mm Floorplate Width:               2400mm Height:                         410mm No. Of T-slots:                 8 Distance from T to T-slot / Jump:300mm T -slot size:                   41mm Weight a plate approx.:         29000Ton Number of matching pieces:      3 Length:                         7000mm Width:                  & ...