swivel used for sale

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Clamping table, sinusoidal table, swivel table Swivel-clamping table Table length: 1130 mm Table width: 300 mm Table height: 112 mm Folding angle: 2 Folding angle: max. 7- folding angle 2 via threaded spindle folding angle max. 7 manually raised to stop Overall dimensions L x W x H: 1450 x 300 x 112 mm Weight: 275 kg good condition Ideal for making wedge strips; used

Swivel actuator, double-acting FESTO DRRD-32-180-FH-Y9A 1578518 Swivel angle: 180° Size: 32 p: 2 - 10 bar 2x Shock Absorber: DYSD-16-15-Y1F New ! with documents ! Dimensions: 243 x 94 x 56 mm

Swivel Arm Vertical Grinding Machine DELTA Type LB 300 Swivel Arm Grinding Machine Fabr. No.: 0495 Year of construction 2004 Grinding range 330 x 140 mm Magnet 250 x 150 mm Grinding height Grinding wheel - magnet approx. 220 mm Grinding height Grinding wheel - clamping surface approx. 280 mm Center of center of column to center of spindle 300mm Grinding wheel diameter 178 mm Fine adjustment 0.01 mm Grinding wheel speed 2840 rpm. Motor power 2.2 kW Mains connection 380 volts, 50 Hz - Depth adjustment via handwheel on the right side of the spindle housing, fine adjustment via knurled wheel on the handwheel - mechanical magnet 250 x 150 mm, overall height 63 mm (grinding height without magnet approx. 280 mm) - Wet grinding device in the machine base - Dressing diamond for swivelling in Space requirement L x W x H 850 x 800 x 1630 mm Weight 380 kg very good condition; used

table length: 700 mm table width: 400 mm table load: t total power requirement: kW weight of the machine ca.: 250 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 620 mm table width: 170 mm table load: t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Double swivel crane Saleg swivel crane Zasche GSX 2x500-4,5 Complete Saeule + 2x swivel arm + 2x chain hoist Crane hook height 3.5m / swivel arm length 4m Saeule with 2 swivel arm holders each 500kg load capacity Stroke designation RUDK / ub speed 4 m/min Total usage 611 hours / usage reserve 988 hours

Workplace equipment, swivel bracket for device holders, monorail ceiling system for device holders, mounting arm, mounting gallows, swivel arm, wall swivel bracket -Swing boom: with balancer 75 kg -Outreach: 4030 mm -Swivel range: 180° -Balancer: Arval type GSB 75 -Steel cable: Ø 5 x 2640 mm -Price/delivery: complete -Transport dimension: 4060/1240/H270 mm -Total weight: 145 kg

Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: electric; Swivel adjustment: electric; Stop adjustment: manual; Height display: digital; Swivel angle indicator: digital; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 interchangeable spindle system La ...

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Milling jaw adjustment: manual; Height indicator: mech. Counter; Swivel angle indicator: digital; Milling Stop Display: Digital; Milling spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 1800mm; Machine depth: 1400mm; Weight: 900kg;

SCM Swivel spindle milling machine - T110 i Product name: Swivel spindle milling machine Type: T110 i Manafacture: SCM Machine number: 071215 Year of construction: 1996 Condition: used, overhauled Technical details: - Table dimensions: 1,000 x 650 mm - Table height: 920 mm - Useful length of the milling spindle: 150 mm - Adjustment range of the milling spindle: 150 - 20 mm - Spindle diameter: 30 mm - Spindle speeds: 3,000 / 4,500 / 6,000 / 8,000 / 10,000 rpm - Number of rings of the table insert: 5 pieces - Diameter suction nozzle: 120 mm, 2 pieces - Foldable Aigner integral stop - FRIED chip trapping and milling protection device - VARIOFEED feeder, 3 wheels - 2 x table extension, each 1,100 mm - Weight: 430 kg - Swivel range of the milling spindle: -5° to 45° Engine data milling machine: - Power: 4 kW - Voltage: 380 V - Current: 9 A - Frequency: 50 Hz ...

Spindle swivel: Yes -45 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Stop adjustment: manual; Height indicator: mech. Counting display; Swivel angle indicator: mech. Counting display; Milling stop indicator: mechanical counter; Spindle diameter: 30 mm; Speeds: 3000, 4500, 6000, 8000, 10000 rpm; Power consumption: 7 kW; Engine braking: Yes, automatic; Suction port: 1 x 120mm, 2 x 80mm; Machine length: 2500mm; Machine width: 1250mm; Weight: 510kg; Stable steel-grey cast iron construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running thanks to precision units and high dead weight Standard with clockwise-counterclockwise rotation and electronic locking when changing direction 5 Speeds from 3000 - 10000 min ̄¹ Speed change is easy and convenient from the machine side Standard with MK 4 ...

Rotary table, swivel and swivel WMW Ø 450 mm swivel 360° x 90° Groove width: 14 / 25 mm foot size: 400 x 500 mm used, tested ! Dimensions: 860 x 800 x 400 mm

Swivel motor, hydraulic swivel motor, with tool gripper HECKERT CWK400 2x SK40 Swivel motor: ECKART NW50-180G spare part for HECKERT CWK400 machining centre, etc. used, checked ! Dimensions: 560 x 460 x 160 mm

Track roller, swivel roller, transport equipment roller, fixed roller -Manufacturer: Tente, swivel castor -Wheel: Ø 80 mm -Width: 60mm -Hole spacing: 105 x 78 mm, Ø 11 mm -Quantity: 11x swivel castors available -Price per piece -Total dimensions: 150/110/H135 mm -Weight: 3.3 kg/pc.

Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm -Stroke: 50 mm -Swivel angle: 0 to 272° -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

Swivel drive, pneumatic cylinder, wing drive, swivel module -Type: DMSI - Angle measuring system: integrated -Swivel angle: 0° - 270° -Number: 1x available -Price: per piece -Dimensions: 110/110/H270 mm -Weight: 9 kg

Swivel drive, pneumatic cylinder, rotary vane drive, swivel module -Manufacturer: Festo, freewheel for swivel drive -Type: FLSR-32-R -Part number: 15 637 -Freewheel direction: Right -Shaft: Ø 16 x 40 mm -Dimensions: 110/97/H93 mm -Weight: 1.1 kg

Swivel bracket, stop swivel, 360° rotatable and 180° swivel CARTEC C80035090135 Load capacity : 35 t ( 35000 kg ) internal width: 75 mm shackle diameter: Ø 40 mm internal height: 120 mm support width: 170 mm distance between the lower edge of the bracket holder and the screw head: 160 mm distance between lower edge of bracket holder and shackle: 340 mm Thread dimension: M90 x6.0 Usable thread length: 135 mm wrench size: 135 mm color: red New ! Dimensions: 520 x 170 x 170 mm Dimensions ( Packaging ): 600 x 210 x 250 mm

Spindle swivel: Yes -5 to 45Â; Height adjustment: handwheel; Swivel Adjustment: Handwheel; Milling jaw adjustment: manual; Height indicator: mech. Numerator; Swivel angle indicator: mech. Numerator; Milling stop indicator: mech. Numerator; Milling spindle diameter: 30mm / new milling spindle; Speeds: 3000, 4500, 6000, 9000; Motor power: 5.5 kW; Engine braking: Yes, automatic; Suction connection: 2 x 120mm; Machine length: 2000mm; Machine depth: 1400mm; Weight: 900kg;

Bosch Turbo Scara SR 800EC Swivel Arm Robot Manufacturer: Bosch Order No. 841551021 Series No. 671840015 Maximum load on gripper flange: 100 N Stroke 3rd axis 480 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Bosch Turbo Scara SR 800EC Swivel Arm Robot Manufacturer: Bosch Order No. 3842506428 Series No. 764840020 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Bosch Scara SR 800 swivel arm robot Manufacturer: Bosch Order No. 384291811 Serial No.54400094 Maximum load on the gripper flange: 5 kg Stroke 3rd axis 480 mm Pn.-Duuck 4-8 bar Weight: 100 kg Swivel range see diagram, Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...

Unused wall swivel arm with manual suspension from VETTER VETTER PW1.25-4.0 wall swivel arm Projection 4 meters Load capacity 125kg Manual suspension VETTER SiCO-HF 500 Daytime capacity max. 500kg Carrier width 50mm - 220mm Comes from company dissolution Viewing and pick-up possible The goods can be viewed at the location 59379 Selm by appointment. Company Michael Bergau Tel. 0152/29500504 You will receive an invoice with VAT shown. Payment: Payment by bank transfer before delivery of the goods. Or cash payment on collection.

Bosch Turbo Scara SR6 Swivel Arm Robot Robot + Control Unit Bosch Turbo Scara SR6 Swivel arm robot 3 842 999 835 Tripod 500 mm Stroke quill 400x25 mm Device connector plugged in Pn pressure max. 8 bar Load max. 5 kg weight 48,5 kg Control consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S More items - new and used - can be found in our shop! International shipping costs on request!

Univ. Swivel-tilt-rotary table Attachment table for Univ. Tool barrel machine Table size 630 x 250 mm Groove width 14 mm Rotatable and tiltable +/- 30 Swivel +/-45 - 4x T-slot Weight approx. 120 kg; used

Univ. Swivel-tilt-turntable probably DECKEL Universal Tool Milling Machine Attachment Table Size: 700 x 400 mm Groove width: 14 mm Slot spacing: 46 mm Mounting plate: width 550 mm x height 300/240 mm - Swivel and tilt +/- 30- Rotatable 360 Weight approx. 140 kg; used

Univ. Swivel-tilt-rotary table similar to lid, Maho milling machine table Attachment table for Univ. Tool barrel machine Table size 680 x 340 mm Groove width 14 mm Slot spacing 45 mm Rotatable 360 (1 revolution on the handwheel = 4 on the table )Nonius 240 tick marks in minutes Tiltable +/- 30 (drive via square with threaded spindle) Swivel 30 (drive via square with threaded spindle) - 7x T-slot 14 mm- Mounting plate 320 x 220 mm Dimensions L x W x H 780 x 470 x 320 mm Weight approx. 180 kg good condition; used

Bosch Turbo Scara SR6 Swivel Arm Robot Manafacture: Bosch Order No. 3842999835 Serial No. 3610 773 Tripod length: Console HubQuill 40025 PN. pressure max. 8 bar Load max 8 kg Weight 48.5 kg Swivel range see picture Mounted on aluminium profile base frame. Condition: Used The robots were all in the warehouse of a large automotive supplier as a breakdown replacement machine, so they are they are in very good condition. In addition to about 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. Available. Workshop equipment, workbenches, workshop trolleys, tools, stackers and shelves plentiful A total of 24,000 m² of production space will be dismantled and sold Please also take a look at our other offers.' After purchase, the amount is due within 7 working days. More items - new and used ...

Control panel, machine control panel, with swivel arm NOMOCO VSR5-230-CNC7 Control / Display: BWO type CNC 920 < -br />Monitor: 215 x 165 mm Control housing: RITTAL A 1558 Dimensions ( with handles ): 950 x 630 x 250 mm Swivel arm: Length: approx. 2000 mm cross-section: 160 x 80 mm mounting flange: 175 x 165 mm used, tested ! Dimensions ( transport ): 1250 x 1200 x 1350 mm

Display with swivel arm ROTEX MAX40-G VME-MAX Swivel arm length: 850 mm Dimensions: 1100 x 600 x 130 mm

Swivel joint, straight ALPHA-TEC GmbH DBG 13 HSKL ( DBG13HSKL ) 1401-8-013 C20012878 NW10 Connection thread: M24 x 1,5, Length: 14 mm Total length: 75 mm width across flats: 24 / 30 mm Material: Steel, galvanized New ! Dimensions ( swivel ): 75 x 33 x 30 mm Dimensions ( packaging ): 80 x 60 x 40 mm

Swivel ring, swivel bearing ROLIX Type: 08 0260 00 zz00 A No. 0430 medium bearing diameter: 260 mm inner diameter: 190 mm outer diameter: 329 mm without teeth sealed with rubber New ! Dimensions: 330 x 330 x 50 mm

Workplace equipment, swivel arm for device holder, monorail ceiling system for device holder, assembly arm, assembly gallows, -Load capacity: 40 kg -Projection: 5150 mm -Total height: mm -Swivel range: 180° -pneumatically braked: in turning/shifting direction -Power connection/pneumatic connection: at the storage area -Number: 1x mounting arms available -Price: per piece -Transport dimensions: 800/5500/H1200 mm -Own weight: 82 kg

Landing gear, support wheel, swivel wheel -Manufacturer: Jungheinrich, chassis jockey wheel swivel wheel from pedestrian stacker type: ERC 205 -Wheel size: 140 x 54 Type GF106-G3 2.0 kW -Dimensions: 240/190/H280 mm -Weight: 16.6 kg

Swivel drive, pneumatic cylinder, rotary vane drive, swivel module -Type: DSR-16-180-P -Shaft diameter: 10mm -Number: 1x available -Dimensions: 78/78/H57 mm -Weight: 0.3kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 36800 € : 747.04 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bottom tool, b ...

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 35000 € : 710.5 € : 2550 mm : 1.5 mm : 1 mm : 2 mm : 155 ° : 110 mm : 0,75+1,1 kW : 3800 mm : 2100 mm : 1650 mm : 2500 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 0-20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MM with servo drive, pull back sliders to create space for down flanges at the back of the ...

Spindle milling machine, swiveable Brand: Panhans Type: 245/20 New machine Technical specifications: - Table size 1100 x 760 mm - table height 870mm - Milling spindle 30 mm, not exchangeable - Clamping height 140mm - Height adjustment 125mm - Extraction nozzle 2 x Ø 120mm - 4 speeds 3000/4500/6000/9000 rpm. - Weight approx. 800 kg - Motor power 5.5 kW / 7.5 PS - voltage 400V / 50Hz - Space requirement 1200 x 1400mm Solid German mechanical engineering Table milling machine with double-sided swiveling permanently installed milling spindle for a swivel range from -5 ° to + 45.5 ° Positioning control for height and swivel adjustment with zeroing of the height and offset Electronic position and speed indicators Quick release belt device Push button for spindle start and stop Left and right rotation Quick clamping device for milling cutters Finely planed gray c ...

Swivel spindle milling machine Brand: Panhans type: 245/200 New machine Solid 880 kg machine with smart control system - Infinitely variable speed regulation 1500 - 10,000 rpm, - 7.5 kW motor with 11 kW frequency converter - Pushbutton with electronic soft start 7 touch control, optional use, top and bottom - Cutter zero point selectable in program, 3 reference points - Simple operating menu through innovative touch control (max. 2 levels) - Operating hours counter - Warning messages in case of operating errors - Remote maintenance via Internet (VPN tunnel) - USB interface for data backup and import of tools, programs and users - Tool database for 5 tools (20 programs are possible per tool) - 2-axis positioning control for height and swivel adjustment - Electronic position and speed displays Double-sided swiveling, fixed milling spindle for the swiveling range  ...

Swivel part ingenous from Walter type HU 150E Peak height is 150mm. Direct divisions via perforated disc possible. Division 1 -24 Haohtcz Indirect sharing is no longer possible, a worm wheel is missing. Use on fraes and drilling machines For more information on request, please note the photos. Special price

spare parts - cook bolinders - pinch roll pivot arm - infeed bottom Feed swivel bracket bottom (front) made of ST Plate 2.2 No. 54

Wall swivel crane Payload 250 kg Lifting height 5,000 mm Extension 6,500 mm Hallway control Electricallifting/Lowering Lifting speed 10 /2.5 m/min. Connection 380 Volt

columnar swivel crane #5016 Capacity: 80 kg Total height: 3.25 m Lifting height: 2.5 m Console length: 2.5 m Voltage: 380 V

Bosch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Order No. 3842999836 Serial No.3810333 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg Panning area see picture Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

osch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Order No. 3842999836 Serial No.3810102 HubPinole 40025 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg Panning area see picture Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.

Bosch Turbo Scara SR 800 swivel arm robot Manufacturer: Bosch Order No. 3842291811 Serial No.469801012 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn.-Duuck 4-8 bar Weight: 100 kg Pivoting range Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a failure replacement machine, so you are accordingly they are in very good condition. In addition to about 50 paternosters, countless other machines such as presses, robots, furnaces, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves abundantly available A total of 24,000 m² of production space will be dismantled and sold Please also note our other offers.' After purchase, the amount is due within 7 working days.