stromag used for sale

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, hydraulic multi-disc spring-loaded brake -Output shaft conical: Ø 45 - 40 mm -Input shaft bore: Ø3 2 mm -universally applicable -Number: 11x brakes available -Price per piece -Dimensions: 220/190 mm -Weight: 16kg/pcs

Brake for hydraulic motor, hydraulic motor, oil motor, hydraulic pump, multi-disc spring-loaded brake, multi-disc spring-loaded brake -Manufacturer: Stromag, fluid-switched multi-plate spring-loaded brake from the GSL aerial work platform -Bolt circle: Ø 160 mm M14 -Dimensions: see photos -universally applicable -Number: 2x brakes available -Price per piece -Dimensions: 220/190/H190 mm -Weight: 19kg/pcs

Limit switches, buttons, safety switches, position switches, spur gear limit switches -Manufacturer: Stromag, spur gear limit switch series 100 -Type: 3.98 NE-684 F -Voltage: 230 V 1.5 A -Shaft: Ø 10 x 20 mm -Protection class: IP54 -Price: per piece -Number: 2x available -Dimensions: 235/130/H140 mm -Weight: 2.5 kg

Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 12x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg

Diesel generator set 125 KVA Iveco 6Zylinder year 1994,6900 hours Schallgedämmt. Ready and available in 59557 Lippstadt Nationwide delivery cheap Ask for more'm under 0172 72 653 24 available daily 8-22 h

Magnetic coupling STROMAG UNNA ERD16 504249-10 Shaft diameter: Ø 42 mm 1 groove 6 clutch discs 24 V DC, 53 watts New ! Dimensions: 157 x 147 x 71 mm

Bremsspule STROMAG DESSAU 2 BLFM Hollow shaft diameter: Ø 10 mm housing diameter: Ø 85 mm Coil diameter: Ø 29 / 78 mm ( inside / outside ) New ! Dimensions ( brake coil ): 74 x Ø 85 mm Dimensions ( packaging ): 125 x 125 x 130 mm

Magnetic coupling STROMAG EZE 63 ( EZE63 ) Ø 45 mm 2 grooves Motor: 60 W 24 V New ! Dimensions: Ø 162 x 80 mm

Flexible coupling STROMAG Periflex® 24 x 1 Coupling size: PTT-104 R shaft diameter: Ø 34 mm 8Flange diameter: Ø 80 mm Tyre Size: 203 R Tyre diameter ( inside / outside ): Ø 62 / 105 mm Tyre width: 35 mm New ! Dimensions( coupling ): 105 x 105 x 75 mm Dimensions( packaging ): 120 x 120 x 100 mm

Power supply, sliding contact STROMAG with 2 replacement contacts diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 10 mm Dimensions: 95 x 22 x 22 mm

Coupling hub for elastic coupling STROMAG Periflex® PNL4R Coupling size: 4 R Shaft diameter: Ø 48 mm bolt circle diameter: Ø 65 mm 6x threaded hole: M8 x 1.25 New ! Dimensions( clutch hub ): 101 x 101 x 65 mm

Power supply, sliding contact STROMAG (Paul Langer, Dresden) Carbon brushes diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 15 mm Dimensions: 75 x 22 x 22 mm

Power supply, sliding contact, candle brush for wet operation STROMAG copper diameter sliding contact: Ø 5 mm Thread: Ø approx. 17.7 mm x 1.5 mm Sliding contact length: 22 mm unused ! Dimensions: 90 x 22 x 25 mm

Power supply, sliding contact STROMAG copper diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 15 mm Dimensions: 75 x 22 x 22 mm

Power supply, sliding contact STROMAG diameter: Ø 6 mm thread: Ø approx. 17.7 mm x 1.5 mm length: 10 mm Dimensions: 75 x 22 x 22 mm

Stop for press brake, edging bench, guillotine shears ... -Spare part: stop bar comes from a Dorstener BBM press brake type: APE80-3050 -Servo motor: manufacturer Stromag -Servo motor: Type: FGP311/005-40AA -Stop ruler: 2630 mm -Length unit approx.: 800 mm -Dimensions 2630/800/H340 mm -Weight 480 kg

sheet width: 1050 mm plate thickness: 1.50 mm pre-bending: 1.25 mm diameter of upper rolls: 65.0 mm diameter of lower rolls: 65.0 mm side roll diameter: 65.0 mm speed: ca. 6,0 m/min voltage: 400 V total power requirement: 0.8 kW weight of the machine ca.: 455 kg range L-W-H: 1500 x 700 x 1230 mm Furnishing: - electro-mechanical three-roll round bending machine - robust electric drive STROMAG BZFM 63 drive motor - asymmetrical roller arrangement - manual delivery of the side roller - manual delivery of the bottom roller - swing-out top roller - freely movable double foot switch Right/left rotation of the rollers - side control cabinet Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9401269 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic coupling STROMAG UNNA EFL16 504249-20 shaft diameter: Ø 49 mm 6 clutch discs 24 V DC, 47 Watt New ! Dimensions: 160 x 160 x 61 mm

a used stromaggregaat VALMET Bio gas engine 4 cil. good condition with radiator, and control cabinet ( not complete ) 50 KVA, 400 volts. generator Price from Leende € 2.800,=