strip used for sale

Straightener, strip straightener with variable gear motor LENZE Type 11.712.02.10 Output speed gear motor 12 to 72 rpm infinitely variable Torque 80 to 40 Nm Straightening roller speed 19 to 115 rpm. Straightening roller width 520 mm Straightening roller diameter 90 mm Number of straightening rollers Total 4 pieces Motor power 0.37 kW Mains connection 380 Volt, 50 Hz - infinitely variable speed adjustment via handwheel on gear motor - Drive via open gear drive straightening rollers Upper part mechanically for adjustment - on stable metal substructure straightening machine was used for cardboard Space requirement L x W x H 630 x 460x 1060 mm Weight approx. 160 kg good condition; used

Hydraulic scissor lift table GRUSE type HF 2 HS Fabr. Product no.: 75432 Year of construction 2008 Load capacity 250 kg Platform size 1190 x 740 mm Useful stroke max. 1270 mm Construction height - table bottom 285 mm Construction height - table top approx. 1555 mm Operating pressure max. 150 bar at 250 kg engine power 0.75 kW mains connection 230 volts, 50 Hz - Rotary switch for up and down on the hydraulic unit - Double shears with a lifting cylinder- Pipe rupture protection directly on the cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the stroke restriction - hydraulic unit with tank separately standing own weight table unit approx. 180 kg net weight hydraulic unit approx. 30 kg good condition; used

TABLE mm 2600 x 530 ROLLS min. ÷ max. mm 0.4 ÷ 3 STRIP FABRIC MAX MM 5 max. workpiece height min. ÷ max. mm 12 ÷ 50 min length or width processable plate mm 190/65 Speed m/min 7

Hydraulic scissor lift table GRUSE type ELS 0.5-8-1-G-SO Fabr. Product code: 124984 Year of construction 2017 Load capacity 300 kg Platform size 1250 x 800 mm Useful stroke max. 785 mm Height - table bottom 345 mm Construction height - table top 1130 mm Motor power 0.8 kW Mains connection 400 volts, 50 Hz - Foot switch for up and down, with emergency stop and key switch for control Single scissors with a lifting cylinder - circumferential safety contact strip with limit switches under the upper ramen - adjustable limit switch for the upper lifting restriction - table surface with sturdy wooden worktop and airliner rails with lashing eyes - hydraulic unit with tank mounted under the table- feet under the table corners, mobile with pallet truck own weight 430 kg very good condition, almost as new; used

Stock number: 3766 SLITTING LINE LONG STEEP LINE Manufacturer: AKV, Type: 1250 x 0.4 - 3 mm - 2238 Year of construction: 1989 Specifications: Size sheet width 1270 mm Min/Max. sheet thickness 0.4 - 3 mm mm Feed speed 0-65 m/min - Strip shears 0.4 - 3 mm - Discharge reel 12 T - Reel reel 12 T - Low discharge 12 t Accessories: Coil carriager 12 T

Description: Very well preserved FRIGGI band saw. Details: Type ONL 800x800 ACN Serial number 3379 Year of construction 2005 electrical data 30 kW / 55 A Phases 3 x 400 V / 50 Hz Flywheels Ø 1,000 mm Rectangular cutting capacity 800 x 850 mm Cutting capacity Ø 800 mm Strip dimension 54 x 1.6 mm belt length 9,470 mm Trolley stroke 500 mm incl. documentation

Description: Very well preserved FRIGGI band saw. Details: Type ONL 800x800 ACN Serial number 3416 Year of construction 2006 electrical data 30 kW / 55 A Phases 3 x 400 V / 50 Hz Flywheels Ø 1,000 mm Rectangular cutting capacity 800 x 850 mm Cutting capacity Ø 800 mm Strip dimension 54 x 1.6 mm belt length 9,470 mm Trolley stroke 500 mm incl. documentation

Description: Very well preserved FRIGGI band saw without roller table. Currently, this machine is still in use and ready for demonstration. In total we currently have 4 large saws make FRIGGI in stock, one of them with roller table. We would be happy to make you a complete offer. Details Type ONL 800x850 ACN Serial number 3445 Year of construction 2007 electrical data 30 kW / 55 A Phases 3 x 400 V / 50 Hz Flywheels Ø 1,000 mm Rectangular cutting capacity 800 x 850 mm Cutting capacity Ø 800 mm Strip dimension 54 x 1.6 mm belt length 9,470 mm Trolley stroke 500 mm incl. documentation

SUNDWIG Rotating Dividing Shear with Chop Shear YOM: 1997 Capacity: 2000mm x 13mm Max. Speed: 36m/min Min/Max Strip width: 700-2030mm; Min/Max Thickness: 2.8-13.2mm (Bulb plate 3.0-10.0mm) Cutting length: 500-16000mm Try-out table length: 500mm Infeed speed 10m/min, Pass line 1000/970mm, Manipulator to change the knives

SMS Leveller YOM: 1990 Model: 3-13-2000 Max Strip width: 2030 mm Max Thickness: 13 mm 11 Rolls, diam.: 125/115 mm; 154 Back-Up Rolls, diam: 130 mm Max opening (gap): 100 mm Speed: 30/45 M/Min; Leveling Pressure: 6.500 kN; Main drive: 0-199kW

Cutting length: 4300 mm Cutting height: 2150 mm automatic: , ELCON precision panel saw type D 215 ----------------------------------------------------- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----------------------------------------------------- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length ...

The scope of delivery includes: 01x Kolli flow rack frame, used Manufacturer: Tegometall Type: CI Material color: white / galvanized Material color (rolls): white for truss width: approx. 2,800 mm Total width: approx. 2,780 mm Total depth: approx. 2,450 mm Total height: approx. 110 mm Further data on the flow rack frame: Number of roller strips per segment: 18 pieces Roller strip spacing: approx. 130 mm Tray width: approx. 440 mm

Qty. 1 Second-hand cut-to-length line – in production Mfc.: Vigano (Italy), PLC: Siemens Built: 2000 available in 9 - 2023 Status: Still in production Strip width: 580 - 2000 mm Thickness: 1.5 – 6.0 mm Max coil weight: 30 tons Max width 1250 mm up to S420MC (max thickness 5 mm) Length of sheet: 580 - 6000 mm Tolerance: +/- 1 Daily production: 80 tons

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Mariani (Italy) Built: 1988/89 Electrical and controller are of 2006 Status: dismantled and in storage Strip width: 1500 mm Thickness: 0,5 - 3 mm Coil weight: 25 ton Coil ID: 500 / 700 Coil OD: 700 / 1700 Slitting shear rollers diameter 220 mm Knives dia.: 355 mm Line speed: 80 m/min.

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

Qty. 1 Second-hand slitting line - dismantled Manufacturer: Guida (Italy) Built: 1990 Status: dismantled and in storage Strip width: 1500 mm Thickness: 1.0 - 8.0 mm Coil weight: 20 ton Coils ID: 500/600 plus steel spacers for bigger diameter Shear roller diameter: 220 mm Knife diameter: 355 mm Speed: 0/25/50 m/min

max wire diameter: 4 mm max strip width: 40 mm table dimensions: 860 x 860 mm internal diameter of tube support: 100 mm max 9 toolholders can be installed on the table

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

State of the machine: Excellent, after a full renovation Technical data: Dough strip size (h x w x l): 110 × 165 x 850 mm Capacity: 4 strips per minute = 240 strips per hour Absorption rate: 50–80 % Warranty: 6 months parts warranty – worldwide

Forderband - Wood waste disposal Stainless steel strap, with carrier Horizontal strip: 1,500 mm Total length 3,200 mm Climbing belt: 2,600 mm at 1,600m elevation

Edge banding machine Cehisa SYS 5PS - Only about 60 km edges glued / little used! - Condition tiptop - Sturdy construction all important aggregates available: - Infeed ruler - Joining milling - Preheat plate - Glue application - Apply edges (rolls or strip magazine) - Pneumatic pressure roller driven - Pressure roller on top, spring-loaded - Pressure roller at the bottom, spring-loaded - Caps front & rear - Flush milling top and bottom - Copy corners front and back -Scraper - Schwabbelscheibe Accessories: -Tool - Feed rollers for various edge materials - various spare blades - Settings folder Year of construction 2008 Masch. No. 532 The machine is approx. Available at the beginning of October (probably earlier) and would then have to be picked up on a fixed date. Disassembly and collection by buyers The machine is in top condition, ready for  ...

Brand: Martin Type: T54 Year of construction: New Motor power: 5.5 kW Knife shaft speed: 5,000 tpm Knife shaft: Z-4 Tersa, ø125 mm Planer width: 5000 mm Spahn removal: max.8 mm Table length: 2.850 mm Task - Table length: 1.640 mm Removal - table length: 1.200 mm Table height: 855 mm Dressing stop: Aigner stop, 45°Movable with dunn material planing strip weight: 1.200 KG

Code: 0797 Brand: VALENTINI MACCHINE - ITALY Model: 19 - 11 Pneumatic clamp desk for drawers, wooden elements , strip panels Technical data: Work table mm 1900 x 1100 Work table height mm 720 N° 4 positionable pneumatic pistons with adjustable stroke Positionable support squaring Compressed air 7 atm Overall dimensions mm 2050 x 1250 x 900 h Weight kg 850

Type (EP) -- Bandwidth (mm) -- Length (m) 800/4 5+2 -- 1.000 -- 524 800/4 5+2 -- 1.000 -- 579 800/4 5+2 -- 1.000 -- 262 800/4 5+2 -- 1.000 -- 401 800/4 5+2 -- 1.000 -- 103 800/4 5+2 -- 1.000 -- 229 800/4 5+2 -- 1.000 -- 244 400/3 -- 1.000 -- 28 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 220 800/4 5+2 -- 1.000 -- 315 800/4 5+2 -- 1.000 -- 401 800/4 -- 1.000 -- 192 800/4 5+2 -- 1.000 -- 640 800/4 5+2 -- 1.000 -- 340 ? -- 1.000 -- 220 ? -- 1.000 -- 400 ? -- 1.000 -- 37 ? -- 1.000 -- 90 ? -- 1.000 -- 100 800/4 5+2 -- 1.000 -- 432 500/4, 5+2 -- 1.000 -- 71 - Conveyor belts of different lengths - All with strip width (BB) = 1,000 mm - Individual purchase also possible - Partly as good as new

Schaal SEP 40 Automatic Punching Press. Year of manufacture: 1993. Completely revised in 2023 with new Siemens PLC control. Nominal capacity: 400 [kN] (40 [t]). Min./Max. number of strokes: 100 – 500. Ram adjustment: 70 [mm]. Variable stroke: 8 – 70 [mm]. Ram surface area: 340 – 300 [mm]. Stroke range: 8, 10, 15, 20, 25, 31, 36, 41, 46, 50, 54, 58, 61, 64, 66, 68, 69, 70 [mm]. Table dimensions: 550 x 580 [mm]. Fitted with gripper feeding device SZV 2. Width of strip: 8 - 120 [mm]. Feed length: 2 – 80 [mm]. Feeding thickness: 0.1 – 2 [mm]. Feeding: 180 [°]. Feed accuracy: ±0.01 [mm]. Drive power: 7,5 [kW]. Dimensions (H x W x L): 2300 x 1600 x 1400 [mm]. Weight: 3800 [kg]. Including operating instructions in German and English and schematics included. Also on stock high speed presses: Mabu, Schaal, Bihler and other Bruderer models. Also Ideal BAS welders

Precision Deburring Faceting Milling Machine / Edge Milling Machine Specifications: Steel – stainless steel – aluminium – plastic – machining Deburring and faceting process is carried out with milling cutter Support angle - facet angle tiltable Facet angle adjustment 15 to 45 ° Facet width infinitely adjustable 0 to 7 mm Length of guide strip 500 mm Speed 2750 rpm Drive 400 V / 0.7 kW Space requirement approx. W 650 x D 600 x H 950 mm Weight approx. 30 kg

Machine has been retrofitted for the personal protection of own fixture construction, with new German CE conformity. Capacity 2500 - 3000 pieces / hour There are still spare parts available. Furthermore, 3to fleece and 1.5 tons of wire and 700kg of strip are available for each type of fleece.

Strip stacking KUKA industrial robot with device / gripper arm for stacking strips Model robot: KUKA KR 150-2 Construction date: 2007

Single sided edge bander with hot melt, fixed side at the right, pre-milling unit Edge thickness: 0,4 to 12 mm Workpiece thickness: 8 - 60 mm Feedspeed 8-20 m/min (limited to 10 m/min using the contour trimming) Workpiece transport by chain, top pressures with rubber rollers Sound enclosure over all trimming motors Equipment: Adjustable fence Pre-milling with 2 shapers, each 2,2 kW Coil and strip magazine Hot melt unit, Quickmelt type Pressure zone with1 driven and 2 non-driven pneum. Loaded rollers End trims, 2 x 0,35 kW motors, straight and chamfer 15? Top/bottom trimming, motors 2 x 0,35 kW Radius trimmming Contour trimming unit, leading and following edge, 2 x 0,35 kW Radius scraping unit Glue scrapers Buffing unit Controlls PC 20+

Motorised height-adjustment Sound enclosure over all trimming motors Equipment: Coil and strip magazine Hot melt unit Pressure zone End trims, chamfer and straight, automatic adjustment Top/bottom rough trimming Top/bottom fine trimming, tilting, Contour trimming unit Scraping unit Buffing unit return conveyor Ligmatech ZHR 05

Sell a conveyor belt from Fördertechnik und Maschinenbau Dip Ing Günther Röwe GmbH that is no longer needed. Strip widths 260mm Length 800mm Drive SEW geared motor I 60:1 VMIN 890/15 Kw 0,18 Nm 48

Horizontal band saw HEMA HTR 400 Special band saw, for example, for cutting deep-drawn plastic parts or insulating materials (glass wool or rock wool) Built in 2000 Blade length: 3,900 mm Motor power saw: 1.5 kW Cutting speed: max. 1,200 m/min Cutting width: max. approx. 650 mm Cutting height: ma. approx. 230 mm Conveyor belt width: 650 mm Table length: 160 cmm Table height constant: 95 cm (The sawing unit itself is adjustable in height) Roll diameter: 40 cm Suction conveyor belt: connection for external air supply 100 mm Feed speed conveyor belt: infinitely variable Height adjustment by handwheel – display via counter Blade tension indicator Suction nozzle: 2 x 100 mm Engine brake Limit switch-secured doors CE marking Machine dimensions – approx. dimensions: 200 cm x 160 cm x 150 cm (LxWxH) Weight: approx. 700 kg The conveyor belt is cut on one side  ...

Wood Her Sprint 1312 FÜ + PU heavy design - edge thickness 0.4 - 8 mm PLC screen control Pre-milling unit for joining in front of the glued part Fully automatic edge magazine for roll and strip goods Glue application station cartridges + PU gluing car. Tactile nozzle Workpiece height 6-55 mm Cross-cut unit for rolls and strips up to 8 mm edge thickness with changeover of 0-10° inclination of the cross-cut saws Milling unit, flush milling 8 mm, radius milling - chamfer milling - 15° MOT Pulling blade unit for chamfers and radii with 2 pulling blade carriers pneum. pneumatic engagement and disengagement Surface Drawing Blade Unit - Finish Spraying device - PU Machine in TOP CONDITION

working width: 630 mm; working height: 280 mm; cutter head: strip knife; number of blades: 4; height adjustment: elektric; read out workpiece thickness: Scala; feed speed: variabel; infeed roller: steel ; outfeed roller: steel; table roller: yes; motor power: 8,8 kW; suction connection: 160mm; machine length: 1200mm; machine width: 1200 mm; weight: 2000kg;

AGG 600_SSK0 Achievement: PRP: 600.0 kVA / 480.0 kW / 866 A ESP: 660.0 kVA / 528.0 kW 50 Hz 400 volts Disposals: Terminal strip 3-pole, neutral conductor, grounding. Engine: Scania DC16 093A 02-54 Power: 545.0 kW Cylinders: 8 Cooling water capacity: 68.0 l Oil volume: 48.0 l incl. starter battery 24 volts Generator: Nidec TAL Series 600 kVA 1 Bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hours, 3x phase curren ...

AGG 465_PSK0 Achievement: PRP: 465 kVA / 372 kW / 671.97 A ESP: 509 kVA / 407.2 kW / 735.55 A 50 Hz 400 volts Disposals: Terminal strip 3 phase, neutral conductor, grounding. Engine: Perkins 2506A-E15TAG1 Power: 451 kW RPM: 1500 Cylinders: 6 Cooling water capacity: 58 l Oil volume: 62 l incl. starter battery 24V Fuel: Diesel Generator: WEG 465 kVA 1-Lager Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 680 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hours, 3x phase ...

Currently in stock! AGG 300_SSK0 Achievement: PRP: 300.0 kVA / 240.0 kW / 433.0 A ESP: 330.0 kVA / 264.0 kW 50 Hz 400 volts Disposals: Terminal strip 3 poles, neutral conductor, grounding. Engine: Scania DC 09 072A 02-13 Power: 261.0 kW Cylinders: 5 Cooling water capacity: 37.0 l Oil volume: 36.0 l incl. starter battery Generator: Nidec TAL series 300 kVA 1-bearing Synchronous generator with AVR voltage regulation, directly with Steel disc clutch flanged to engine. Construction: NEA in soundproof hood with 990 l base frame tank. Control: Comap InteliLite AMF25 automatic emergency power incl. battery charger and cooling water heater, for automatic start in the event of a power failure (without power switching, not synchronizable), with shutdown in case of overtemperature and lack of oil pressure. Digital display of voltage, frequency, operating hour ...

Petzing & Hartmann / Pehaka US 5 - N, vertical band saw Two-stage band saw motor Stage 1 speed 15 - 220 rpm (infinitely variable Stage 2 Speed 150 - 2200 rpm (infinitely variable) Work table 750x700mm with stop Work table swivel / tilt Passage - column / band saw 510mm Swxmlk Saw passage (height) approx. 420mm Ideal - strip welding device Emergency/ Off Speed indicator Saw blade - length 4100x3-20mm Dimensions: LxWxH 1.4x1x2.3 meters Weight 450Kg

Measuring plate / mounting rulers / measuring strip -3 x lengths in wooden transport box -1 x 2700mm -2 x 1600mm -Total weight approx. 150 Kg Rm3tbzht

Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic power unit)Year of construction 1991 Nominal load capacity 1500 kg Lifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mm Stroke max. 930 mm Construction height - bottom 100 mm (with installation frame) Construction height - top 1030 mm Hydr. Operating pressure 350 bar = lifting capacity 1000 kg Hydraulic engine power 1.5 kW Mains connection 400 volts, 50 Hz - mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is actuated - without hydraulic power unit - without electrical control Length of mounting frame 2270 mm Width of installation frame 1580 mm Height of installation frame = height below 100 mm Dead weight Lifting table 500 kg good condition; used

SPECIFICATIONS: Workspace: Maximum width: 1600 mm Minimum length: 550 mm Working height: min. 10 mm - may. 120 mm PLC control COMPOSITION: I. Group: 02 Side brushes with automatic adjustment II. Group: 01 Transverse rotation brush (immersion brush) III. Group: 03 Interchangeable heads with disc brushes or brushes IV. Group: 02 edge strip heads V. Group: 03 Interchangeable heads with disc brushes or brushes VI. Group: 01 Transverse rotation brush (immersion brush) EQUIPMENT: 01 Motorized transport carpet: 2200 x 1600 mm 01 Self-cleaning motorized unloading belt (conveyor belt) 2500 x 1600 mm

Surface planing machine Kirchner Leipzig or simply surfacer for smoothing and leveling (dressing) of wood Incl. Adjustable angle stop and extensive accessories, working width: 410 mm, knife system: Strip planer knife Z2, engine: 2,2 kW

Key data: 500 , 2600 , 4

Weinig planing machine Product name: Planing machine Type: AF51 Manufacturer: Weinig Machine number: unknown Year of manufacture: unknown Condition: Used Technical details: - Total table length: 2,600 mm - Feed table: 1,380 mm - Removal table: 1,080 mm - Table height: 810 mm - Chip removal: 0 – max. 8.0 mm - Stop (L x H): 1,250 x 155 mm (obliquely adjustable up to 45° without scaling) - Planing width: 500 mm - 4-knife shaft with 4 strip planing knives - Suction nozzle: 160 mm - Power: approx. 3kW - Weight: approx. 750 kg - 4 knives installed with slight signs of wear - 1 piece Barkomat adjustment gauge - the engine and the knife shafts have been re-mounted - the table lips have been re-milled (approx. 8 mm slots) to reduce the noise level. minimize Machine dimensions/set-up dimensions (L x W x H): 2,600 x 1,350 x 810 mm Transport dimensions (L  ...

Eccentric punching machine HAULICK + ROOS type RVD 125 double column - eccentric press machine No. 212560 Year of construction 1981 Compressive force 125 ton. Table size: 880 x 800 mm, table opening: 470 x 140 mm, stand width: 900 mm, lateral column width: 415 mm, ram stroke: 45 mm, ram adjustment range: 0-80 mm, installation height in the picture: 340 mm , stroke rate: 50 to 300 strokes/min. Engine power main drive 22 kW Mains connection 380 volts, 50 Hz - Double connecting rod engine with 4-bearing eccentric shaft for off-center ram pressure Load - adjacent electrical cabinet - NC roller feed EBU, width 250 mm, year of construction 2003 - adjacent control panel for the roller feeder - strip running direction from left to right Space requirement (press) L x W x H 3000 x 2000 x 3020 mm Transport height 2950 mm Weight of the press about 11 ton.; used

unfortunately there are no detais for this facility. Cold strip driven by a chain system.

Precision straightener, straightener SCHUBERT WMO/150 Strip width: max. 150 mm roll diameter: Ø 12 mm voltage: 380 V 3AC 16 A frequency: 50 Hz used, tested ! Dimensions:1020 x 1000 x 1100 mm Dimensions ( transport ):1200 x 800 x 1250 mm

Machine control BWO ELEKTRONIK GmbH System 900 1x Power supply: NG8, 083547 1x X-CPU modules: X-CNC, 800884 3x I/O modules: EK, 083946 2x I/O modules: AK, 083942 1x cover strip for empty slot: BLB, 084102 1x Module for CAN applications: CAN, 084489 1x CNC axis modules: AAZ2, 083705 1x backup battery: 083 678 1x BUS termination: 083 679 1x Chassis 1 slot: 900-1, 083 580 1x Chassis 2 slots: 900-2, 083 581 1x Chassis 8 slots: 900-8, 083 583 used, tested ! Dimensions: 390 x 300 x 210 mm

Profile rail, perforated, 60 pieces OBO BETTERMANN 1268 L 200 FS 1104 268 Size: 200 x 35 x 18 mm Slot width: 17mm Material thickness: 1,25 mm Profile shape: C-profile Material: Steel, strip galvanized IP65 New ! dimensions ( profile rail ): 200 x 35 x 18 mm Dimensions ( packaging ): 245 x 160 x 280 mm

Dosing system cabinet, system cabinet, cabinet for dosing station PROMINENT 2200 x 660 x 1600 mm usable dimensions: 2170 x 520 x 1560 mm ( width x depth x height ) 2x sliding door: 1120 x 1375 mm ( width x height ) mounting strip for dosing pumps: 2170 x 230 mm height above cabinet floor: 580 mm, distance from rear wall: 170 mm feedthroughs in left side wall: 1x Ø 135 mm / 1x Ø 75 mm / 4x Ø 32 mm penetrations in the roof area: 2x Ø 40 mm / 3x Ø 75 mm / 1x Ø 90 mm with pipe sockets pipe fittings: Outer diameter: Ø 110 mm, length: 150 mm 6 height-adjustable feet used, tested ! Dimensions ( assembled ): 2200 x 660 x 2030 mm

Pneumatic nailer, strip magazine nailer PASLODE GN 161 ( GN161 ) for nails up to 160 mm Pmax 8 bar suitable nails W125 ! used, tested ! Dimensions: 540 x 520 x 140 mm