straightening used for sale

material width:800 mm coil weight:12,0 t coil internal diameter:470 - 520 mm coil external diameter:1500 mm material thickness:0,4 - 2,5 mm no. of straightening rolls:8 straightening roll diameter:53 mm number of draw-in rolls:2 inlet roll diameter:160 mm speed:35 m/min material thickness at 150 mm material width:2,5 mm material thickness at 650 mm material width:1,5 mm material thickness at 800 mm material width:1,0 mm straightening machine:RM 8-53/160-800 decoiler:HE 200-1000

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

pressure: 100 t distance between columns: 1500 mm stroke: 380 mm working feed: 2,47 mm/sec : 700 adjustment of press crosshead: 1500 mm slide adjustment -horizontal: 1740 mm feed speeds: 7,54 mm/sec return speed: 9,06 mm/sec Pressure power: 258 bar table-size: 1740 x 1396 mm total power requirement: 2,2 kW weight of the machine ca.: 2060 kg dimensions of the machine ca.: 1,74 x 2,07 x 2,04 m This 100 ton straightening press has a manually movable portal and is exclusively made in the Netherlands. Thanks to the movable portal and cylinder you can easily reach every point of the ‘to be pressed’ surface. The design of this portal press makes it possible to place heavy material on the large working table with a crane and to slide the portal over the material when the pressing starts. The quality of these hydraulic straightening presses is very high. Furthermore, the hydraulic unit is equ ...

pressure: 150 t distance between columns: 1565 mm stroke: 450 mm : 700 mm adjustment of press crosshead: 1100 mm slide adjustment -horizontal: 2150 mm feed speeds: 9,0 mm/sec pressing speed: 2,0 mm/sec return speed: 15,4 mm/sec Pressure power: 320 bar table-size: 1550 x 3000 mm table height: 600 mm total power requirement: 15,4 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 3250 x 2500 x 2550 m This 150 ton gantry press is eminently suitable for straightening large and heavy structures and sheets. These Profi Press portal presses have a movable frame and a movable cylinder. Thanks to these features you have an easy access the different pressing and straightening points of the material. The longitudinal displacement of the frame is carried out by a frequency inverter and cogged belt to ensure precise slides. The lateral movement of the cylinder / headstock is motorised ...

material width:380 mm coil weight:1,0 t material thickness:2,5 mm coil external diameter:1000 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:90 mm weight:0,8 t Dimensions (WxDxH):0,8 x 1,3 x 1,7 m

material width:320 mm coil weight:2,6 t material thickness:0,5 - 2,0 mm coil internal diameter:400 - 510 mm coil external diameter:1200 mm no. of straightening rolls:7 straightening roll diameter:50 mm number of draw-in rolls:2 band speed:0 - 30 m/min power capacity:1,5 kW weight:1,5 t

material width:300 mm coil weight:0,5 t material thickness:0,4 - 3,0 mm coil internal diameter:420 - 520 mm coil external diameter:1200 mm no. of straightening rolls:9 straightening roll diameter:50 mm number of draw-in rolls:2 diameter of draw-in rolls:50 mm power requirement:1,5 kW weight:1,55 t dimensions (WxDxH):2,5 x 1,2 x 1,8 m

Bandwidth 180 mm Plate thickness 2 mm Max. coil weight 2 X 500 Kg Max. coil-diameter 1200 mm Feeding speed 0 - 60 m/min Straightening rolls 30 mm Number of straightening rolls 9 pcs Max. power 6 Kw

Sheet metal straightening machine make UNGERER type RM 300/2/23Machine -No: 5507 built in 1961Material width: 300 mmMaterial thickness: 2.0 mmNumber of Straightening Rollers: 25Standard roll diameter: 23 mmWeight approx: 2 tExternal dimensions: 200 x 900 x 1700 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet metal straightening machine make SCHLEICHER type RMC 6-40-96 / 300Machine -No: 5185/1411, built in 1994Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 0.5 mmDrive power: 1.7 kWWith- 3 pairs of straightening rollers- 1 pair of feed rollers- Loop control- Contact pressure of the feed rollers adjustable- Remote control for setup modeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make SCHLEICHER type RML 6-53 / 96-300Machine -No: 3378/1135, built in 1985Bandwidth: up to 300 mmSheet thickness: 0.5 - 1.5 mmDrive power: 1.5 kWWith- 4 sets of straightening rollers- 1 feed roller- R + L run- Automatic / manual- Belt speed infinitely adjustableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Sheet straightening machine make ARKU type RM 3020 / 21.4Year of construction unfortunately not visible, nameplate not availableTechnical specifications:Sheet width: 200 mmMaterial thickness: 0.5 - 4.0 mmmin. Workpiece dimensions: 50 mmReading the machine setting: 0.01 mmMax. Vertical roller distance: 10 mmNumber of straightening rolls: 21Roll diameter: 30 mmApproximate speed: 3.5 - 20 m / min.Drive power: 4.0 kWExternal dimensions approx.: 1600 x 1500 x 1200 mmWeight approx .: 1284 kgWith- discharge chute- Infeed tableused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Pneumatic gripper feed make HEILBRONN type PVS 250/100/80Machine -No: 205238 built in 1993with attached strip straightener type RLE 27Technical specifications:CLIP FEEDmax.strip width: 250 mmmax.strap thickness: 3.0 mmFeed length range: 5 - 105 mmmax. material cross-section: 240 mm²Clamping force of the feed clamp: 17.2 kNcorresponding to frictional clamping force: 34.4 kNClamp tension force: 5.6 kNcorresponding to friction clamping force: 11.2 kNFeed force: 3.0 kNTAPE straightenermax.strip width: 200 mmmax.strap thickness: 2.0 mmNumber of straightening rolls: 7Diameter of the straightening rolls: 40 mmNumber of feed rollers: 2Diameter of the feed rollers: 40 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always avail ...

Sheet straightening machine make SCHUBERT type WM 19/18/220Machine -No: 700616 built in 1985Technical specifications:Material width: 220 mmNumber of straightening rollers: 19Straightening roller diameter: 18 mmExternal dimensions approx.: 1400 x 900 x 1350 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make DREHER type RIMA model 1675 BGLOrder -No: A07/395-90 Year 1991Technical specifications:max. belt width 300 mmMinimum belt width 50 mmTape Thickness 0.6 - 2.5mmMaterial strength 400 N/mmBelt speed 5 - 30 m/min.7 straightening rollers diameter 60 mm2 feed rollers diameter 60 mm2 outfeed rollers diameter 60 mmDrive power 5.5 kWDimensions approx. 1200 x 1000 x 1500 mmWith- 3 digital displays- Emergency stop switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Vertical straightening press make EITEL type RP 25Technical specifications:Press force: 25 tDimensions (LxWxH) approx.: 1400 x 900 x 2100 mmWeight approx: 2000 kgOil filling: 150 lWith- Straightening harness- hydraulic control device- Extension tables 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

material width: 125 mm material thickness: 2 mm straightening feed: 5 - 30 m/min total power requirement: 1,5 kW weight of the machine ca.: 460 kg swiveling straightening unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

material width: 200 mm material thickness: 0,6 - 3,0 mm no. of straightening rolls: 7 number of draw-in rolls: 2 straightening roll diameter: 60 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: mm coil weight: 4 t coil internal dia.: mm material width: 300 mm material thickness: 0,4 - 2,0 mm total power requirement: 8,5 kW weight of the machine ca.: t dimensions of the machine ca.: m Conveyor system consisting of: ALBA decoiler EHA-4-300 and elec.-hydr. Leveler RMS EM 2/6-120/45-300 B, year of manufacture 99 coiler: bundle weight 4000 kg, coil inside diameter 460-620 mm, External coil diameter 1600, dimensions 1500x1140x2300 mm, weight approx. 2000kg Straightening machine: feed rollers number 2 - diameter 120 mm, straightening rollers number 6 - diameter 45 mm, center distance 80 mm, take-off speed 5-20 m/ min, Deduction height above floor 1500 mm, dimensions 1100x740x1800 mm, weightapprox. 600 kg ARKU roll feed, Servomaster 300, year 94 passage width 300 mm, roller diameter 100 mm, max. cross-section 1000 mm², Material thickness 0.1-5mm, feed accuracy better than ...

combined bending machine-straightening press, profile bending machine, bending machine, flat iron bender, horizontal bending/straightening press, horizontal bending machine -Flat iron bender: hydraulic profile bending machine -Pressure capacity: 140 Ton. -Stroke cylinder: 455 mm -Counter bearing max width: 1250 mm -Support rollers: height adjustable 250 mm -Dimension: 2060/3735/H1620 mm -Weight: 8300kg

Machine Type: Kieserling Nine-Roll Straightening Machine Working range tubes and rods Ø 5 mm to Ø 30 mm Flow direction from right to left Speed 40 m/min Make Kieserling, type WRUW 1 Location Solingen Length 1,600 mm Width 1,400 mm Height 1,600 mm Weight 3,700 kg Country of origin: Germany Delivery time approx. 4 weeks Other: The scope of supply of the machine includes the complete finishing for loading and removing the straightening material, consisting of: pre-bearing with roll-off slope, infeed channel with pusher, discharge channel with ejector, roll-off slope, collection belt trough.

material width:250 mm coil weight:2,5 t coil internal diameter:430 - 520 mm coil external diameter:1650 mm material thickness:0,5-6 mm no. of straightening rolls:7 straightening roll diameter:60 mm number of draw-in rolls:2 weight straightener:1,2 t weight decoiler:1,4 t dimensions straightener (WxDxH):1,2 x 1,2 x 2,0 m dimensions decoiler (WxDxH):1,8 x 1,8 x 2,3 m expansion:hydraulic

material width coil line:600 mm coil weight in kg:2 x 3000 kg coil internal diameter:460 - 630 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm Number of Straightening rolls:9 roll diameter:30 mm material cross-cut:1200 mm² weight:9,5 t Dimensions (WxDxH):4,3 x 2,6 x 2,6 m straightening machine:30.600/9 double decoiler:Kohler, 3000.2 ausiliary drive:hydraulic lag brake:pneumatic expansion:hydraulic snubber roll:hydraulic; motoric driven

CONTROLS   PLC SIEMENS S5 System consists of:+ MAE M-AH 4RH automatic straightening machine, year 1999+ Bühlmann Tube End Processing Station+ W. Müller blow-out device, year 2003max. straightening force: 40 kNmax. width between centers: 750 mmcenter height: 160 mm

Straightening and cutting machine rolling from Coil. used test line please ask us for your special offer.

Straightening plate measuring plate measuring plate reinforced plate made of steel casting used. Length approx. 3560 mm Width approx. 985 mm Height approx. 910 mm (adjustable) with 5 feet Casting tear ingenuous plate with height-nivelable feet, support ball-bearing Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Hydraulic straightening press make EITEL type RPT 100 TYear of construction 1978Technical specifications:Press force: 100 tWorkpiece height: 200 mmWorkpiece width: 210 mmWorkpiece length: 12000 mmRam speed: 1.5 m / min.With- hand control- Roller conveyor feed with support table 7000 mm- Roller table discharge table 7000 mm- Pneumatic material discharge device- Standing desk- Spare Partsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic straightening press make MAE type S 16 RHTechnical specifications:Press force: 16 tRetraction force: 57.7 kNWorking pressure: 204 barRam speed, down: 25 mm/sRam speed, up: 68 mm/sStroke: 200mmInstallation height: 550 mmProjection: 190 mmTable depth: 320 mmTable width: 480 mmTable height: 750 mmTank volume: 120 lPump flow rate: 11.6 l (min.Tappet bore: 32mmDrive power: 5.5 kWExternal dimensions L x W x H: 1400 x 700 x 2070 mmweight approx.used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

pressure: 3 t throat: 0 mm stroke: 200 mm total power requirement: 15 kW weight of the machine ca.: 4 t dimensions of the machine ca.: m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

horizontal hydraulic straightening and bending press make KUNKEL type P 32Year of construction 1993Technical specifications:Maximum working pressure: 32 tinfinitely variable from: 0 - 32 tStroke of the pressure tools: 200 mmClear width pressure tool - anvil: 300 mmCasters:4including 2 rollers on extendable barswith outer distance: 3000 mmExternal dimensions approx. H x W x D: 1160 x 1200 x 1400 mmDrive power: 5.5 kWPump capacity: 280 kg/cm2Weight approx.: 1400 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

specifications: - Pressure capacity 100 KN / 10 t - Compressive force adjustable 0 - 100 kN - Stroke length 0 - 150 mm - Clear width approx. 200 mm - Lifting speed 0 - 0.6 m/min - Tool height up to approx. 100 mm - Bending performance - with prism MW 100 flat to approx. 100 x 12 mm - Tube bending up to approx. 1 inch - Directional power Wy at straightening block distance of 1m 100 cm³ - Drive 400 V / 1.1 kW - Space requirement approx. W 1100 x H 1000 x D 650 mm - Weight approx. 400 kg

sheet width: 250 mm coil outside dia.: 1400 mm weight max. in kg: 2500 kg plate thickness: 2 ... 4 mm straightening feed: 2,5 ... 15 m/min coiler: expanding range: mm total power requirement: 1 + 4 kW weight of the machine ca.: 1,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. working width approx. 195 mm; v.v. (7x) straightening rollers; (4x) transport rollers; rollers diameter 80 mm; Supply table dim. approx. 900x400 mm; v.v. control box and control cabinet; electric/pneumatic; incl. loop control device

Straightening machine make SCHLEICHER type RML 6-40-96-300Machine -No: 3668/1178, built in 1986Bandwidth: 50 - 300 mmSheet thickness: 0.4 - 1.5 mmDrive power: 1.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Continuous straightening machine make WEINGARTEN type RA 21Machine -No: 141240 built in 1973Technical specifications:Number of reels: 7Roller diameter: 40 mmstepless speed: 10Passage width: 240 mmDrive power: 1.5 kWused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening machine make DREHER type Rima Mod. 1645 CVSerial no. A11 594/88, manufactured in 05/1989Technical specifications:Bhmx2lm3lqmax.working width: 300 mmStrip thickness min./max. : 0.4 - 1.2 mmAdjustable belt speed: 5 - 40 m / min.With- 4 pairs of rollers 40 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Frame Straightening Press / Body Sealer Fabr. GILETTEType and year unknownTotal length approx: 3,0 mmobileWith- Hand hydraulic- a lot of accessories, chains, fasteners etc.according to enclosed phototsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic horizontal straightening machine make SCHULZ type HPR / PR 160 MPMachine -No: 54471 Year 1977Max. Printing capacity: 160 tOperating pressure: 280 barRam stroke: 650 mmPlunger surface: 1000 x 200 mmTable surface: 1000 x 650 mmDrive power: 55 kWWeight approx: 10tWith- Press pressure setting- clamping pressure adjustment- 2 two-handed outlets movable- adjustable / limited stroke lengthsused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening press make EITEL type P 25 AMachine -No: 10991, built around 1965Technical specifications:Press force: 25 tSlide speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- lightingused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening press make EITEL type P 25 AMachine -No: 11351, built in 1965Technical specifications:Press force: 25 tRam speed dev / up: 3.0 m / min. / 10 m / min.Ram stroke: 400 mmInstallation height: 600 mmThroat: 250 mmDrive power: 3.0 kWExternal dimensions L x W x H: 1300 x 1400 x 2300 mmwith- Emergency switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1200 mm Thickness 150 mm Working height 800 mm Panel thickness 35 mm - Base made of solid wood Weight approx. 950 kg good surface; used

Straightening and welding plate cast steel strongly ribbed Length 3050 mm Width 2000 mm Thickness 300 mm Plate thickness approx. 55 mm continuous Weight approx. 4.5 ton. good condition; used

Straightening and welding plate cast steel strongly ribbed Length 2000 mm Width 1600 mm Thickness 110 mm Working height 600 mm Plate thickness 30 mm continuous Weight approx. 1000 kg Good condition, good surface; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 250 mm Working height 820 mm Panel thickness 30 mm Continuous height-adjustable metal base Weight approx. 400 kg Surface rusted; used

Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used

Straightening and welding plate cast steel strongly ribbed Length 1000 mm Width 1000 mm Thickness 230 mm Working height 970 mm Top thickness 38 mm continuous - Metal base Weight 450 kg; used

Straightening and welding plate, cast strongly ribbed Length 1000 mm Width 750 mm Thickness 110 mm Working height 810 mm Top thickness without ribs 34 mm - 3 pieces height-adjustable support points between table and metal base - simple metal base Weight approx. 280 kg; used

Straightening and welding plate Steel Steel plate length 1900 mm Width 1500 mm Thickness 70 mm continuously machined surface Weight approx. 1600 kg good condition Height-adjustable feet made of cast steel can be found in our shop; used

Straightening and welding plate cast steel strongly ribbed Length 1600 mm Width 1005 mm Thickness 280 mm Plate thickness approx. 85 mm continuous - Center hole 245 mm, 400/800 mm - Threaded holes M 20, approx. 55 mm deep - Through holes 27 mm Weight approx. 2.5 to. good condition Former press table; used

Straightening and welding plate SIEGFRIED WEYRAUCH Gemmingen cast steel strongly ribbed Length 1000 mm Width 800 mm Thickness 28/125 mm Working height approx. 850 mm - Feet with adjustment screws for aligning the plate Weight 370 kg good surface; used