storage used for sale

Konica Minolta Storage Film System (CR) Regius Sigma II with: First Processing Station 5 RC-300 CR cassettes: 18x24 - 1 pcs./ 24x30 - 2 pcs./ 35x43 - 2 pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Used storage tanks VARIBOX - 1.000 L - double-walled - with plug-in system and recesses for forklifts - Capacity: 1,000 L -Plastic - tested and cleaned - for diesel, oil or other liquids Discount possible for higher quantities. Inspection and shipping costs after consultation.

Heating oil tank - tank system - steel tank - diesel storage brand new - 100m³ capacity - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick closure, 1 vent pipe with vent hood, 1 brand-new limit value transmitter with type approval (AIII), 1 ladder and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage fluid. The container is completely repainted - RAL 7011 iron grey. (Other RAL colours are also possible on request!) L = approx. 15.80 m - D = 2.90 m - weight approx. 19.0 to. - ex works, freely charged - (For transport reasons, dome covers an ...

Battery Interchangeable Rack, Transport Rack, Storage Rack for Forklift Battery Changing table, Battery pallet, Battery change system, Battery exchange trolley Manufacturer: WELUX 2.5 Type: WS2-RR-2-300 Payload: 2x 500 kg per compartment = 1000 kg Slide-in dimension per compartment W x D = 300 x 920 mm Slide-in dimension without center bar W x D = 655 x 920 mm Setting height: 80 to 200 mm - Center bar removable - 16 pieces galvanized steel rolls 50 mm - 4 pieces fixed castors 100 mm, 2 pieces rotatable with locking fixed castors individually height-adjustable via threaded rods Total dimensions L x W x H 1050 x 950 x 615 mm Net weight: 85 kg good condition; used

We sell 2 x Fujitsu DX500-S5 Storage each consisting of 21 x 950GB SSDs Total count of SSDs: 42 and: 4 x Brocade G610 switches 8 ports/ 8 x 16GB SWL SFP AC In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is ...

P332 - used approx. 81.6 m³ / 81,600 ltr PE100 tank, plastic tank, flat bottom tank, single-walled. technical details: capacity: approx. 81.6 m³ / 81,600 litres material: PE100 tank, plastic tank manufacturer: Weber Kunststofftechnik year of construction: 2016 dimensions: approx. Ø 4.00 m × approx. H 7.00 m specific weight: at least 1.0 kg/ltr Used PE100 tank, professionally cleaned and in great condition, almost as new, some are completely unused. Single-walled, above-ground storage tank, standing on flat floor. Lid on top of the roof and on the tank wall, several inlets and outlets, impervious to light. Former water tank, suitable for many different media. Price upon request. Transport can be arranged at low cost. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been ...

Storage box lockable, stackable according to photos. Metrics: Length approx. 115cm Width approx. 75cm Height approx. 75cm Manufacturer DOKO

Storage box for materials, lockable, tight against rainwater. Width approx. 3m. The doors are opened upwards. The doors are supported by gas pressure dampers to make it easier to open. In the round openings at the front are locks. Very safe to use! Weight per box approx. 400kg. Once with two doors, Once with three doors. Optically bad, technically good!

12,500 LITRE WINE TANK / STORAGE TANK CUBIC, HORIZONTAL WITH FLAT BOTTOM MADE OF V2A approx. 43 tanks in sizes from 5,100 litres to 12,860 litres under :https://eurolux.de/neue-produkte Specifications: Kat.Nr. 24-0520 Volume 12500 L MJ UNI-RILL Surface inside 2B=IIIC sanded Surface outside 2B=IIIC sanded Weight 800 kg Material V2A (AISI 304) 1.4301 Width 2450 mm Total height 2500 mm Depth 2750 mm Cubic design Number of feet on truss Last Use Food Tank crown: Flat bottom with 1 % slope Threaded socket DN50 Cylinder: Manhole 450 x 350 mm oval Trial faucet 1/2" with flanges Clear drain DN50 Subsoil: Residual drain with butterfly valve DN50 on truss

153,500 LITRE STORAGE TANK / WINE TANK / AGITATOR TANK WITH SIDE MIXER, UPRIGHT MADE OF V2A MJ UNI-RILL https://eurolux.de/product/24-0507euba-153500-liter-lagertank-weintank -ruhrwerkstank-mit-seitlichem-ruhrwerksmixer-stehend-aus-v2a Tank top floor: Conical bottom 8 reinforcement profiles 4 crane eyelets Cathedral central ⌀ 500 CIP cable DN50 Cylinder: Manhole 440 x 340 mm Tasting tap DN15 Clearance drain with butterfly valve DN 65 lockable exterior door with propeller agitator - Tank 1/2 agitator right (Stelzer with Siemens motor) - Tank 2/2 agitator left (Stelzer with Siemens motor) Tank underbody: Flat bottom with 3% slope with residual drain pipe pulled forward with butterfly valve DN 65 Foot ring with 8 mounting flanges

17,000 LITRE STORAGE TANK/WINE TANK, RIEGER, UPRIGHT MADE OF V2A https://eurolux.de/product/24-0513euba-17000-liter-lagertankweintank-r ieger-stehend-aus-v2a MJ UNI-RILL Tank top floor: Sloping floor with 3 % floor slope 4 reinforcement profiles 2 crane eyelets Threaded socket DN65 reduced to DN50 central downward drawn CIP cable DN50 connection DN 50 front Cylinder: Level indicator with strip and scale Tasting tap DN25 Clear drain with angled seat valve DN 50 Tank underbody: Cone bottom with residual drain pipe pulled forward in the middle with disc valve DN 50 tank wall 4 feet with domes - height adjustable with washers

52,700 LITRE WINE TANK / STORAGE TANK, EXTINGUISHING WATER TANK, ROUND, MADE OF STEEL https://eurolux.de/product/24-0504euba-52700-liter-weintank-lagertank- loschwassertank-rund-aus-stahl MJ UNI-RILL Surface coated on the inside, food-safe Volume 52700 L Steel as a material Total height 9700 mm Cylinder height 9100 mm Diameter 2700 mm Vertical design Last Use Food Tank top floor: arched bottom 2 crane eyelets Nozzle DN50 Cylinder: Manhole Ø 410 x 310 mm oval Tasting tap DN15 Clear drain DN50 Tank underbody: Flat bottom with 3 % slope with outlet beading pulled forward with reduction to DN 50

9,500 LITRE STORAGE TANK/WINE TANK MADE OF V2A, WITH STURDY FRAME FRAME, LONG OVAL https://eurolux.de/product/24-0505euba-9500-liter-lagertank-weintank-a us-v2a-mit-stabilem-rahmegestell-langovalliegend Specifications Surface inside 2B=IIIC sanded Surface marbled on the outside Material V2A (AISI 304) 1.4301 Width 1730 mm Total height 2750 mm Depth 3700 mm Oval-horizontal design Number of feet 4 Last Use Food AS UNI-RILL Front: Level indicator with strip and scale (connection) Manhole oval 400 x 350 mm Tasting tap 1/2" Airlock DN 50 Clear drain DN 50 Residual drain DN 50 height-adjustable feet with domes and washers

2,000 LITRE SPEIDEL WINE TANK/ STORAGE TANK/ STACKING TANK SADDLE TANK UPRIGHT, ROUND MADE OF V2A https://eurolux.de/product/24-0555euba-2000-liter-speidel-weintank-lag ertank-stapeltank-satteltank-stehend-rund-aus-v2a Manufacturer: SPEIDEL Surface inside IIID Surface marbled on the outside Volume 2000 L Material V2A (AISI 304) 1.4301 Total height 1800 mm Cylinder height 1150 mm Diameter 1400 mm Vertical design Number of feet 3 Last Use Food AS UNI-RILL Topsoil: arched bottom 2 crane eyelets Bottom beading upwards with airlock DN 50 Tank cylinder: Manhole oval 430 x 320 mm Tasting tap DN 15 Threaded weld nozzle DN 15 for level indication Subsoil: arched bottom Forward-drawn outlet beading in the middle, flush with the tank DN 50 with butterfly valve 3 saddle feet

We sell 1.) 2 x IBM DS8884, 2831-984 Storage Systems each consisting of 3 Frames, Dual controller 12 shelves, each 24 x 1.8TB/10k SAS Disks 2 shelves, each 24 x 3.8TB SSDs 2.) 2 x IBM V7000 Storwize, 2076-524 each with 4 controllers 22 shelves, each with 24 x 1.8 TB SAS disks 4 x IBM Storwize V5000, 2077-3122 each with 60 x 10TB NL disks 1 shelf with 12 x 10 TB NL disks 1 x IBM 2077-AF3 shelf with 24 x 1.6 TB SSD 3.) 2 x HDS VSP G1000 each consisting of 24 shelves with 1,6TB/1k SAS 32 x 10TB FMD In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems menti ...

2-axis tracking solar system with 4.6 KWh storage Year of construction: 2016 / 2019 Replacement of all engines and mechan. Head Exhibition facility without warranty Power: 2.31 KWp to visit at the Goch site, demonstration possible Transport by forwarding agent separate invoice ; System height 2.65 m Payment in advance when ready for dispatch

Storage stacker with lateral 1.2 m thrust Lifting capacity 1 ton Lifting height 3 m Driver's cab also goes up without battery

There are two identical storage tanks available, diameter: 1500mm, height: 2500mm.

Storage tank with agitator, capacity: 20,190l, agitator rotational speed: 1500/min, diameter: 2500mm, height: 4575mm, with documentation.

54.000 Litres Storage tank with propeller mixer sideways in V2A KK UNI-ALBI Measurement: Total height: 6,500 mm Cylinder height: 4.500 mm Diameter: 3,600 mm Material: V2A Surface: Inside and outside 2B=IIIC Upper bottom: with ventilation connector with inclined cone bottom with 2 crane eyes Cylinder: with level indicator with 3 threaded connector DN 65 with manhole Ø 450x350 oval with sample tap with ladder hook with propeller mixer sideways mounted Lower bottom: with dished end with rest outlet pulled forward with butterfly valve DN65 with 5 calotte feet height adjustable

There are three identical storage tanks available, width: 700mm, height: 3600mm.

brand new fuel oil tank - diesel tank - storage tank with a capacity of 5,000 litres - according to EN 12285-2 (replacement for DIN 6616), above ground, double-walled, incl. test certificate. The tank has two saddle feet, a manhole with dome cover and is equipped with the following fittings: 1 filling tube with TW closure (filling cap) and immersion tube, 1 sounding tube with dipstick and dipstick lock, 1 vent pipe with vent hood, 1 brand-new limit sensor with type approval (AIII), 1 conductor and 1 spare sleeve for removal purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 2.80 m - D = 1.60 m - weight approx. 1.5 tons. - ex works, freely charged - We recommend: Sandblast the above container from the outside, prime and completely repaint - iron gray / RAL sh ...

The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible.

"This is 5.000 liter Stainless Steel storage tank with attached ladder. The ladder will be taken out for transportation. Unit Specifications - Tank Capacity 5.000liters - Top inlets - Bottom Outlets - Tank Dimensions 1800Diameter X 2000mm Height - Total Dimensions 2550mm X 2000mm X 2700mm (L x W x H) including 750mm ladder’s length "

Overview Cold storage cell with floor insulation Technical data  Temperature range: -1°C to -20 °C  Dimensions (width x depth x height): 7,40m x 15,80m x 3,23m Insulation panel: 100mm | 0,23Wm/ K  Non-slip, waterproof, food safe floor Incl. LED lighting + mounting bracket

Storage bin SCHÄFER KÄSTEN Lager Fix 1 720 x 480 x 300 mm made of sheet steel galvanized

Storage bin, 32 pieces PAGUS TGL 9390 - Size IV 280 x 170 x 135 mm made of sheet steel various colors Illustration similar used, checked ! Dimensions(Packed): 670 x 600 x 500 mm see also LA197, 64 pcs also available in other quantities

Storage viewing container, 2 pieces SCHÄFER KÄSTEN Lager-Fix 1 720 x 480 x 295 mm Material: sheet steel, galvanized used, tested ! very good condition ! Dimensions ( 2 pieces ): 720 x 480 x 590 mm

Storage bin, 51 pieces PAGUS 2x TGL 9392 - Size II 570 x 380 x 200 mm 24x TGL 9390 - Size III < br />380 x 250 x 200 mm 25x TGL 9390 - Size IV 285 x 165 x 130 mm made of sheet steel various colours Illustration similar ! used ! Dimensions(with Euro pallet): 1200 x 800 x 950 mm

Storage bin, 32 pieces PAGUS 32x TGL 9390 - Size II 550 x 330 x 200 mm made of sheet steel various colors Illustration similar ! used, tested ! Dimensions( with Euro pallet ): 1200 x 800 x 1700 mm

Storage container, 30 pieces PAGUS 10x TGL 9390 - Size II 550 x 330 x 200 mm 10x TGL 9390 - Size III < br />380 x 250 x 200 mm 10x TGL 9392 - Size III 380 x 285 x 200 mm made of sheet steel various colours Illustration similar ! used, tested ! Dimensions(with Euro pallet): 1200 x 800 x 1200 mm

Stainless steel storage silo: 100 m3. Total measurements: Height: 14 m, width: 4.12 m.

The scope of delivery includes: 01x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 10x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 28x stacking transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the place of delivery or scope of delivery.

The scope of delivery includes: 1.044x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight / pallet: approx. 95.00 kg Weight / 1.044 pcs.: approx. 380,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information about the item: This item is offered for pickup only. Any further desired transport or shipment of this item is associated with additional costs, which can be requested separately from us depending on the ...

The scope of delivery includes: 261x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Pallet: approx. 95.00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded - Delivery is only up to the curb - For unloading, access and departure routes to the Unloading point r ...

The scope of delivery includes: 56x Stack transport box, used Manufacturer: SSI Schaefer Type: 14/6-4 Design: recessed grip on both sides Colour: blue Material: Polypropylene External dimensions LxWxH: 210x150x123mm Inside dimensions LxW: 190x123mm Usable height in stack: 110 mm Capacity: 2.50 litres Stackable: yes Weight | pcs.: 0,266 kg Weight | Package: approx. 17,00 kg Note: These are used stacking transport boxes. There may be scratches, dirt and Color errors may be present. Application: The stacking transport boxes are suitable for storage of tools, screwdriving materials and other Hardware. General information on how to ship the item: - The goods are shipped free of charge throughout Germany - Island transport is excluded

Storage Container | 20 feet | 6 meters

• Useful capacity 2245 l • Material 1.4404 • Operating temperature 30°C • Manhole cover top Ø 500 mm • Concave tank bottom • Drain at bottom centre NW 30 • Drain at the side NW 50 • Formerly storage tank for PW plant

Clamping plate, welding table, welding table, straightening plate, ball table, ball and roller table -Storage table: shelf with roller conveyor, mobile, height-adjustable -Plate: 2000 x 1000mm, thickness 3mm -Height: 980 to 1160 mm -Cut-out: 250 x 250 mm -Steel frame: solid with castors -Total dimensions: 2000/1000/H980 mm -Weight: 90 kg

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -Height: 660 to 1000 mm adjustable on both sides -Steel frame: solid -Dimensions: 1120/515/H660 mm -Weight: 64 kg

Clamping plate, welding table, welding table, straightening plate -Storage plate with: roller conveyor -both sides: different height adjustable -Steel frame: solid -Dimensions: 1100/510/H780 mm -Weight: 64 kg

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.2 Links -Quantity: 10x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.415.2 Links -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.3 kg/pc.

Cold room lock, cold room lock, mortise worm lock, cold room door lock -Manufacturer: STUV, cold storage lock unused in original packaging -Type: 3.16.416.1 KRT lock V2A -Quantity: 6x door lock available -Price per piece -Dimensions of box: 260/150/H40 mm -Weight: 1.1 kg/pc.

Various galvanized storage containers with and without lid Dimensions H= 1.35 m, Br=1.75 m, L=2.00 m Net price 300,00 E

Storage Container | 10 feet | 3 meters Auction at: abcs://abc.troostwijkauctions.com/de/l/lagercontainer-%7C-20-fu%C3%9F- %7C-6-meter-%7C-co01141-A1-18421-104 If you have any questions, please do not hesitate to contact us!