stone mill used for sale

Technical data: -Plate thickness up to 6-40 mm -Pipe Beveling min. Ã? 100 mm -Max bevel in one run 10 mm - speed 2.6 m / min -Drive 400 V / 2,2 kW -Space requirement approx. B T 550 x 500 x H 700 mm -Weight approx. 65 kg

Qty. 1 Second-hand section rolling mill plant Mfc.: Pomini, OMV, BM, Bendotti Built: 1989 continuously modernised Stopped: 2019 Installed power: 16.2 MW Billet income sizes: 120 x 120 up to 160 x 160 mm Length: 6.0 m Section production: Round bar dia.: 30 – 60 mm Angles from 30x3 up to 100x12 mm U” channel from 40x20 and 120x55 mm T” shape from 30 till 100 mm T” shape from 30 to 120 mm (Special for elevator rails- Leader in Europa) The rolling mill can be implemented with many other profiles by using different grooved rolls. Production capacity: 250,000 – 270,000 T/annum depending on the production mix Scope of supply: Reheating furnace Section rolling mill line Tying Machine Descaler Bundle Machine Cooling tower Machine shop

No. 3087: 1 gebr. 5-axis milling machine Fabr. BOHNER & KÃ?HLE, VH 2 type / 10 K with control Fidia V 7.2 arb.-ber.: 1500 x 1500 (1000) x 975 mm Power: 14 kW Accessories: Table 2500 x 1000 mm 16 x tool changer Cup other: Spindle retainer for SK 50 Spindle speeds 40-5600 min-1 RADIUS Milling spindle 1030 mm Weight 12500 kg

Spare parts support: No. 4379: 1 gebr. Post assemblies to serial. RAMBAUDI, Rammatic 1201, type b. with HEIDENHAIN iTNC 530 Accessories: 1. milling head SK 50 / 22 kw / 3,600 - 40 min-1 2. clamping table with T-slots and grid plate 3500 x 1000 3. 30-fach tool magazine CANI 4. chip conveyor - INDASS. Type TPF, 5 Control Panel iTNC 530 - BJ. 2010 6 electronic Handwheel 7 measuring system / glass scale HEIDENHAIN LS 706 C / ML 2840 mm 8 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1140 mm 9 measuring system / glass scale HEIDENHAIN LS 706 C / ML 1440 mm 10 Panel with various assemblies 11 feed / servo - motor SIEMENS

Qty. 1 Second-hand aluminium foil rolling mill plant Mfc.: Marudhar, Sambhav Built: 1993 - 2012 Revamped: 2015 Foil width: 1000 mm Entry thickness: 8 mm Exit: 8 microns Consist of: Melting furnace 22 MT Holding furnace 15 MT Strip caster Roughing rolling mill Intermediate foil mill Finishing foil mill Heavy slitter Strip slitter Foil separator Qty. 2 Foil slitters Annealing furnace

Qty. 1 Second-hand strip rolling mill plant Mfc.: Gautchi, Pechiney, Spidem, Stein Heurty SA, TECMO-HUNTER, ACHARD, WALDRICH Built: 1971, 1973, 1975 Modernisation in 1991 Strip width: 850 – 1600 mm Thickness Entry: 12 mm Exit: 0.3 mm Consist of: Qty. 2 Strip casting line 4-Hi rolling mill Qty. 2 Homogenisation furnaces Slitter Grinder Qty. 2 Coil cars

BUTT END REDUCER consist of cone roller (8 m) with log turner, Cross conveyor 4 strings, butt end reducer (motor 50 kW) steper to feed...

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...

2 piece F. 17.3 2 piece F. 17.34 Milling machines with double head (duplex), with counter holder for horizontal milling

Cast milling machine table Length 1435 mm Width 420 mm Thickness 170 mm T-slots numbers 5 T slots Weight approx. 800 kg

Key data: 300 , 600

Rollers: dia. 300 x 600 mm Roll surface: smooth Rollers type: hollow bored NIP adjustment: Manuel Engine: 22 kW

No. 4304: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 3 CC Bu. 1990 with Sinumerik 880 ARB.-ber.: 400 x 400 x 500 mm, power: 6 kW Accessories: rigid table full cab Electronic Handwheel Documentation other: spindle retainer for SK 40 / DIN 2080 Speed range up to 6300 min-1 Rapid traverse 10 m / min Space ca Weight approx. 3 to

Control cabinet for MAHO 600 - MAHO had manual transmission damage and was therefore exploited. - Are also other parts in stock. Please inquire! Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

: 4378 No.1 gebr. CNC milling machine with 4 cutting heads Fabr. RAMBAUDI, Rammatic 804 type Bu. 1992 with HEIDENHAIN iTNC 530 ARB.-ber.: 1500 x 815 x 815 mm, power: 4 x 11 kW Accessories: clamping table 3250 x 815 mm Maximum table load 5000 kg other: spindle retainer for SK 50 Speed range 40 - 3600 min-1 Quill stroke 150 mm Space requirement approx. 8 x 4 x 4 weight approx. 20 to

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Technical data Table length: 600 mm Table width: 210 mm Longitudinal travel (X-axis): 260 mm Transversal travel (y axis): 150 mm Vertical travel (z axis): 310 mm Distance from vertical spindle to table: 310 mm Distance from horizontal spindle to table: 410 mm Spindle speeds: stepless from: 58 rpm up to: 2000 rpm Taper in spindle: 30 ISO Feeds steps:: 10 longitudinal from: 12.0 mm/min up to: 400 mm/min vertical from: 12.0 mm/min up to: 400 mm/min Rapid traverse: longitudinal: 1.2 m/min vertical: 1.2 m/min Voltage 50 Hz 3x: 380 Volt Motor output: 2.0 HP Total power required: 3.0 HP Machine´s weight about: 700 kg Overall dimensions machine: Length: 1500 mm Width: 1100 mm Height: 1600 mm

Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm Various accessories: Coolant system Lamp

Combined grinding and corrugating machine with hydraulic table drive for rolls with diameter up to 350 mm and a length of a maximum 1,000 mm In addition: 1 piece grinder (Corrugating machine), brand: MIAG, with accessories

Retrofitted in 2005 electrical / CNC control Siemens 840 d Retrofitted in 2012 and 2019 mechanical what made. Technical datas: Rotary spindle speed: 1.25-600 tr/min Spindle maximum power: 55 kW 215 tr/min Horizontal run of the upright on the bench - X 15,000/30,000 mm . X travel 30,000 mm is for both machine Vertical stroke of carriage on upright - Y (mm) 5,600 mm Spindle stroke - 1,100 mm Z: Flowing stroke - w: 1,100 mm Advance - X: 3-5000 mm / min Feed - Y: 3-5000 mm / min Feedrate - Z: 1.5 2,500 mm / min Total weight: 100,000 kg Foundation pit OSTEO. for both machine Length x width x height: 40,000 x 5,000 x 1,800 mm all accessories are available and can be sold at extra costs. For both machines are the following attachments available: â?¢ Chip conveyor For both machines including lubrication and coolend unit for the cutting operation &aci ...

Milling Machine MAHO MH 700 C CNC- 5 axis CNC- Phillips 432 X/Y/Z- 700/450/500 mm B axis CNC Universal table 820x480 mm 5th axis- CNC/NC dividing head ISO 40 spindle adapter Quill stroke of spindle 100 mm Universal table: -swiveling of the Horizontal X/Z axis 30 degrees -swiveling of the vertical Y axis 360 degrees Spindle speeds infinitely variable 20-3150 rpm

Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 700 mm measured 1500 mm from the root and Length min 3.2 m max 6.2 m Number of cutting tools 30 Cutting tool width 60 mm Cuttin motor 37 kW, 1500 rpm Neukv Roller chain driver: gear reductior transmission motor of 2.2 kW hydraulic unit 5.5 kW Total weght including main motor 5000 kg

Control: HEIDENHAIN TNC 124 Traverse path x/Y/Z 500/ 250 / 160 mm Travel W 480 mm Size (L x W) 885 x 320 mm Maximum table load 250 kg Distance from table - spindle nose 0-605 mm Speed x/Y 1-2000 mm / min Feed speed Z 1-1200 mm / min Tool - quick change system SF 32 RPM infinitely 9200 RPM 5 kW Dimensions (W x D x H) 1850 x 2550 x 2400 mm

Control: HEIDENHAIN TNC 135 Technical data Table length: 700 mm Table width: 250 mm Longitudinal travel (X-axis): 320 mm Transversal travel (y axis): 220 mm Vertical travel (z axis): 410 mm Spindle speeds: stepless from: 56 rpm up to: 3150 rpm Taper in spindle: 30 ISO Feeds stepless: longitudinal from: 8 mm/min up to: 1000 mm/min transversal from: 8 mm/min up to: 1000 mm/min vertical from: 8 mm/min up to: 1000 mm/min Vertical quill travel: 60 mm Rapid traverse: longitudinal: 2 m/min transversal: 2 m/min vertical: 2 m/min Voltage 50 Hz 3x: 380 Volt Motor power: 1.8 kW Total power required: 2.6 kW Machine´s weight about: 1000 kg Overall dimensions machine: Length: 1800 mm Width: 1200 mm Height: 1500 mm

Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)

No. 3934: 1 gebr. Universal tool milling machine Fabr. COVER, type FP 1, with active digital display ARB.-ber.: 300 x 160 x 340 mm, power: 1,5 kW Accessories: universal table hydraulic machine vise Tool Cabinet Other: Toolholder SK 40 RPM 2000 RPM

BALLISTRINE- linear profiler,/shaper-double sided 10 hp cutter head per side- follows your templates - shapes both sides- 9' table- hydraulic feed- material hold downs- $7,800

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

: 4471 No.1 gebr. Universal milling machine Fabr. IBERIMEX, type U 1000, b. 1995 with digital display Visulesta 4 ARB.-ber.: 1000 x 540 x 430 mm, power: 5.5 kW Accessories: table size 1500 x 360 mm Documentation Other: ISO 50 spindle adaptor Speed range 40 - 1750 min-1 Space requirement approx. 2 (3) x 2 x 2 m Weight approx. 3 to

No. 0104: 1 gebr. Universal copy milling machine Fabr. COVER, type KF 3 S, b. 1979 with split coordinate table ARB.-ber.: 700 x 560 x 450 mm, power: 3 kW Accessories: Coordinate table (new price about â?¬30.000,00) Simple spindle; Locking arm, control handle with cable, stylus holder, collet chucks Other: 3 m x 3 m space; weight ca. 2.380 kg

Key data: 900 , 530 Dialog 11, 560

Table length: 900 mm Table width: 530 mm Longitudinal X: 560 mm Cross Y: 500 mm Vertical Z: 450 mm CNC Model: Dialog 11 X – Travel:              560mm Y – Travel:              500mm Z – Travel:              450mm Table Length:            900mm Table Width:             530mm Table load:              450Kg Feed rate X-Axis:        3.600mm/min. Feed rate Y-Axis:        3.600mm/min. Feed rate Z-Axis:        3.600mm/min. Spindle Taper:           40ISO/Bt/Mk Power on spindle:        7.5kW Speeds / ranges:         5000Rpm Number of controlle ...

1 milling machine-vertical used in console version Manufacturer Reckermann Type: CONSA V Year of construction: 2001 Control: HEIDENHAIN TNC 124 X-axis: 1000mm Y axis: 370mm Z-axis: 450mm Table size: 1300 x 400 mm Spindle retainer: SK 50 Max spindle rotation: 3600 RPM

Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.

Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

Stock number: U2293-2 Used carbon steel grinding/refining mill by Pallmann (Germany) model PR8. Mill has bolted rotor with diameter 795 mm and stator with diameter 800 mm. Belt driven by el. motor 100 kW, 1480 rpm, 380 V, 50 hz. Manual adjustment of gap between milling plates. Mill has mounted 5 nozzles for feeding gas or liquid inside the milling chamber. Front door bolted with central feeding inlet through feeding chute. Bottom discharge.

X: 500 mm Y: 360 mm Z: 400 mm Speed range: 40-2000 RPM Spindle retainer: SK 40 DIN2079 Control: HEIDENHAIN TNC 155 Total power: 6 kW Machine weight: 2000 kg Dimensions (W x D x H): 2.8 x 2.9 x 1.9 m Condition: good, ready to use

Key data: 800 Heidenhain, 400 TNC 124, 600

Table length: 800 mm Table width: 400 mm Longitudinal X: 600 mm Cross Y: 400 mm Vertical Z: 400 mm CNC Brand: Heidenhain CNC Model: TNC 124 X-Axis:         600mm Y-Axis:         400mm Z-Axis:         400mm Table Length:   800mm Table Width:    400mm Table load:     300Kg Spindle speeds: 4000Rpm Feed rate X-Axis:2.000mm/min. Feed rate Y-Axis:2.000mm/min. Feed rate Z-Axis:2.000mm/min. Stroke pinole:  100mm Length:         2.200 mm  Width:          2.200 mm  Height:         2.200 mm  Weight:         2.200 kg 

Milling Machining unit BSI UR 140 Centre height 80 mm Spindle SA40 Speed 3500 RPM max. Year of construction 11/1998 Various Full reconditioned in 2013 (not mounted since 2013) Voltage 380 V Length 600 mm Width 210 mm Total height 380 mm

Technical data: Fixed angular table: Fixed angular table clamping area: 800 x 400 mm Max table load: 200 kg Working spindle: Tool holder horizontally and vertically: ISO 40 Power of the main drive motor / 100% ED: 2.2 kW Vertical milling head: Speed range, tiered: (12) 50 - 2000 rpm Drill pinole, stroke: 100 mm Swivel range: +/- 90° Travel: X-axis automatic/man.: 385/400 mm Y-axis automatic/man.: 185/200 mm Z-axis automatic/man.: 365/380 mm Feeds: Feed range: 0-650 mm/min Number of feeds: infinitely adjustable Rapid response: 1000 mm/min Characteristics: - Machine accuracy according to DIN 8615 - 3-axis digital displays FAGOR® Innova (option) - Spindle run max. 0.005 mm, incl. test protocol according to DIN 8615 (rolling bearing SKF®/NSK®) - Vertical milling head can be swivelled out for horizontal milling (without d ...

Stock# UG6236 Little used vertical gap mill by Bauermeister (Germany) type GM 80.1 EX. Machine is driven by el motor 75 kW, 3000 rpm. Working output depends on product and can reach up to 800 kg/h. Maximal feed size up to 1.5 mm. Reported maximal output finess up to 200 microns. Mill has adjustable gap in range from 1 up to 5 mm and is equipped with ASIMA rotor working with speed up to 123 m/s. Milling elements designed in hardened steel. Mill has ATEX Ex II 1/2D T 100 C certificate. Shipping dimensions: L 2140 mm x W 1270 mm x H 1470 mm x W 1900 kg.

Key data: 12550 , 350 , 850

Table length: 12550 mm Table width: 350 mm Longitudinal X: 850 mm Cross Y: 250 mm Vertical Z: 470 mm Make: Reiden Swiss Type: FU 150 YOP: 1980 3 Axis digital read out Rapid feed all 3 axis Power 5kW X-Axis:         850mm Y-Axis:         250mm Z-Axis:         470mm Table Length:   1.250mm Table Width:    350mm Table load:     400Kg Spindle speeds: 2000Rpm Feed rate X-Axis:2.700mm/min. Feed rate Y-Axis:2.750mm/min. Feed rate Z-Axis:1.100mm/min. Length:         2.000 mm  Width:          1.700 mm  Height:         2.000 mm  Weight:         2.000 kg 

Control : Heidenhain TNC 355 Travel X - Path 560 mm Y - Path 500 mm Z - Path 400 mm Table 900 x 460 mm Spindle speeds 40 - 4000 rpm. Spindle holder SK 40 Drive power 8 kw Weight 2900 kg

Table length: 0 mm Table width: 0 mm Longitudinal X: 700 mm Cross Y: 500 mm Vertical Z: 450 mm CNC Brand: _Unknown / Other Make: MAHO Type: MH700C Control: 432 YOP: 1989 NC Rotary table (B-Axis) 630 mm CNC 432 with handwheel Pinole 100 mm X – Travel:              700mm Y – Travel:              500mm Z – Travel:              450mm Table  Ø:                630mm Feed rate X-Axis:        6.000mm/min. Feed rate Y-Axis:        3.000mm/min. Feed rate Z-Axis:        11.400mm/min. Spindle Taper:           40ISO/Bt/Mk Speeds / ranges:         3150Rpm Number of controlled axis:3 + 1  Length:  &n ...

Digital display Heidenhain Thread cutting device Automatic pinole feed Electr. adjustable head (height) Coolant pump Table size 600 x 250 mm Recording MK 3 Speed Continuous

Key data: 1600 Heidenhain, 1000 TNC 426, 1400

Table length: 1600 mm Table width: 1000 mm Longitudinal X: 1400 mm Cross Y: 1000 mm Vertical Z: 1000 mm Positions ATC: 0   CNC Brand: Heidenhain CNC Model: TNC 426 Make: CME Type: FS-1 Control: HeidenHain TNC 426 YOP: 2002 X-Axis:         1.400mm Y-Axis:         1.000mm Z-Axis:         1.000mm Table Length:   1.600mm Table Width:    850mm Table load:     2.500Kg Power on spindle:22kW Spindle speeds: 4000Rpm Spindle Taper:  50ISO/Bt/Mk Feed rate X-Axis:20.000mm/min. Feed rate Y-Axis:20.000mm/min. Feed rate Z-Axis:20.000mm/min. Length:         4.260 mm  Width:          2.500 mm  Height:         2.600 mm  Weight:         9.900 kg  Swi ...

Several BÜHLER MDDK roller mills in different versions on sale. Any sort of feeding With or without inlet glass Scraper knifes, single or divided spout Plain rolls or corrugated rolls Size 1000 mm or 800 mm with roller diameter 250 mm Our specialists will provide a liable solution with used Buhler MDDK roller mills at good value.

Capacity: 0 t Diameter: 105 mm Length: 0 mm Horizontal and vertical:Horizontal  Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         300mm Capacity Tube:         60 x R 1000 Ø x mm Capacity T-Profile:    80 x 80 x 8 x R 1000 mm Capacity HEA-Profile:  140 x R 2500 mm Working speed:         1000 - 24000 mm/min. Length:                1.500 mm  Width:                 1.200 mm  Height:                1.400 mm  Weight:                1.700 kg  set universal rolls set pipe rolls BC 25 control system    ...

HELMA- model CF-40-copy milling/shaping machine feed thru with work piece return (2) milling spindles- 18" max. distance between the spindles centers- 28" x45" Table - (2) 30mm. work spindles- 10,500 RPM spindles- 4"max. cutting height - vertical adjustment 10 mm.- (2) 7 1/2 hp. spindle motors - 1/2hp. variable speed feed motor 5' to 30' per min.- 2,200 lbs. $7,500

Table length: 1200 mm Table width: 305 mm Longitudinal X: 950 mm Cross Y: 290 mm Vertical Z: 475 mm CORREA - F2U-E Horizontal & Vertical Milling Machine MACH - ID 6363 Make: CORREA Type: F2U-E YOP: 1988 X-Axis    950 mm Y-Axis    290 mm Z-Axis    475 mm Table Length        1.200 mm Table Width            305 mm Spindle speeds     1800 Rpm Feed rate X-Axis       3.000 mm Feed rate Y-Axis        3.000 mm Feed rate Z-Axis       1.000 mm Length     2.800 mm Width      2.000 mm Height     2.100 mm Weight    2.300 kg