som used for sale

This is a pressure cooker from the premium manufacturer Elro, type DBGN33-EDS-90 from the Metatherm series (latest version), built in 2021 by professionals for professionals. Ideally suited for production kitchens for continuous operation at full load. An absolute premium product in commercial kitchen technology and stands for the highest quality and durability. The material properties are almost indestructible and it is always worthwhile to replace wear parts. This high-quality roaster is equipped with the Elro Quick Cook Select control, which allows for the simplest operation. The Braisiere is in an absolutely unused condition. Device is mounted on feet. The device has been tested in our in-house specialist workshop and provided with the necessary inspection work. There are also more Elro devices coming and coming soon. The price quoted is net plus 19% VAT. Our used equipmen ...

This is a tilt pressure garage from the premium manufacturer Elro, type DBKGN33-EDS-90-L equipped with an automatic lift function. It is an absolute premium product in commercial kitchen technology and stands for the highest quality and durability. This product is almost indestructible. This high-quality roaster is equipped with the Elro Quick Cook Select control, which allows for the simplest operation. The device is in an absolutely unused condition. Device is mounted on feet. The tilt pressure curtain has been tested in our in-house specialist workshop and provided with the necessary inspection work. There are also more Elro devices coming and coming soon. The price quoted is net plus 19% VAT. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Profe ...

Available in stock 6 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

USED CENTRIFUGAL MOLECULAR DISTILLATION SYSTEM Manufacturer: MYERS VACUUM, Inc. Model: PILOT 15 LAB Throughput Capacity 10 - 80 lbs/hr (4.5 – 36.3 kg/hr) Type Continuous Pumping system ultimate pressure: 2 X 10-4 Torr Operating Pressure 10 -3 Torr to Atmosphere Mechanical Forepump >11 CFM High Vacuum Pump 320 L/sec of air at 250C. Power: 10-15 KW/ hour 3 phase wye” 115/208 V, 5 wire 50/60 HZ Available for 230, 415 or 460 Volt. Water: (20°C) 2 gal/min (7.6 L/min) Liquid nitrogen consumption: 0.5 liters/ hour (Utility consumptions may vary depending on process conditions) Dimensions: Height 69 Inches (1.75m), Width 34 Inches (.86m), Depth 59 Inches (1.5m) Net Weight 1300 lbs. (590kg) Centrifugal molecular distillation is a purification technique, which has gained wide acceptance in the chemical, food processing, pharmaceutical, and petroleum industries as well as t ...

Linear unit, stroke 1028mm, RK Monoline Z 60, RK Rose+Krieger, used Top Used - top condition like a demonstration unit The part was removed from a pilot system that was only used for a short time and is in almost new condition. Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. The current price of a similar product is € 1980 excl. VAT. If you have a VAT number, we will gladly issue you an invoice without VAT. Technical data: - Linear unit RK Monline Z 60, with toothed belt drive, RK Rose+Krieger, - Incl. 2 tables 187 x 140mm, table 1 is driven, table 2 is freely movable - the 2nd table can be removed - Max. stroke when using one table = 1028mm - Variable positioning of the drive - Connection linear unit - Gearbox with backlash-free Rotex KTR claw coupling GS24 ...

DE BERNARDI lathe with Fanuc control. Used but still working well. Some technical data follows: Turning length 1500 Bar passage 100 The bar goes in for about 70

Okuma LB35 II CNC Lathe Maximum turning length: 2000 mm Maximum turning diameter : 600 mm 18 inches chuck(SMW) IGF program Machine is in very good condition Turret VDI50 holder Some tools will be given together with the machine All maintenance has been done

Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Machine Details Stock-No. 1105-03863 Type of machine Lathe - cycle-controlled Make CAZENEUVE Type MAXICA HC 725 Year of manufacture 1998 Type of control CNC Storage location HAGUENAU FRANCE Country of origin France Delivery time immediately Freight basis EX WORK Technical details turning diameter 725 mm turning length 4000 mm control SOMAB PL + S5 + -SOMAB turning dia. Over Face-Slide 670 mm turning diameter over cross slideways 390 mm main drive motor 16 kW spindle turning speed range 2500 rpm Spindle Passage 82 mm Chucking diameter 315 mm taper in tailstock MT 5 total power requirement 30 kW Weight of the machine approx. 5 t Additional information Machine in WORKING CONDITION with NUM-SOMAB PL+S cycle control with MULTIFIX rapif tool holder size WITH STEADY

Available in stock 1 x Used Capstone Diesel Fuel Injectors. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Vertical machining center CHIRON FZ08W 2 pallets 12 HSK32 tools Spindle 15000 rpm HSK-32 rotopallet (2 pallets) CNC Fanuc 21iM chip conveyor The machine is under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing several mechanical operations with a single set-up on multiple surfaces of the same piece of work. It is generally equipped with several motion axes and one automatic tool exchange system and sometimes multiple pallets, CNC type: Fanuc 21iM, Number of pallets: 2, Spindle revolutions: 15000

Maximum turning length : 2000 mm Maximum turning diameter : 650 mm Siemens driver and spindle motor VDI 50 holder Some tools will be given together with the machine Machine is in good working condition

Baykal APHS 3106X120 CNC Press Brake 120 Ton Number of axis : 3 Electronic panel has been renewed STEP RK12+ Touch Screen Control Unit Some tools are included

Available in stock 4 x Capstone Air Filters. 1 unit was NEVER USED and is sold inside the original packaging. The other three units are used but are in good conditions. Most commonly used for Microturbines C30. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

MACHINE 2012 MODEL IN WORKING CONDITION, JUST CHANGE MATERIAL, SOMETIMES HANGING AT PART CHANGE, IT IS IN EXCELLENT CONDITION WITH A LITTLE MAINTENANCE. FOR LATHES

it is only DC-80 full complectation line left. There are some additional machines as well. It is chiller, air compressor, pallet mixer.

Lots approx. 4000 frames Glasses + hydrometer + thermometer Discover a unique opportunity! The complete stock of goods from a renowned optician is for sale. But that's not all – you can also expect exclusive components to produce wall clocks made of fine wood with precise hydrometer and thermometer. Details at a glance: - Over 4000 high-quality frames, with retail prices per frame – some worth several hundred euros! - Large quantity on about 7 pallets or sufficient for a van. - Sample case for stylish presentations. - Hydrometer and thermometer, comprehensive accessories for the first-class wooden wall clocks. Take advantage of this opportunity to expand your own optics or retail space or secure a unique collection of high-quality products. This exclusive compilation promises not only quality, but also a wide range of styles and designs. Grab it now and make this offer you ...

Rental system Hosokawa Alpine AS 100 Aeroplex, not for sale. The Hosokawa Alpine Aeroplex AS spiral jet mill is a simple jet mill without dynamic classifier (different to our Hosokawa Alpine AFG) that allows the ultrafine micronization with a final fineness of around 10 to 150µm of different products. Mainly dry non abrasive materials up to 3 Mohs hardness can be pulverized although some models allow wear protection inserts within the grinding chamber (pending availability). The micronizer design without rotating parts (thus no bearings or grease) makes this mill especially suitable for pharmaceutical and food applications, although it´s used as well on the chemicals industry for instance. The comminution takes place inside the grinding chamber where the product is accelerated by the compress gas injected through the grinding nozzles causing the different particles to collide with ...

Available in stock 2 x Used Capstone Pre-heating Modules. Hawke International PL612 Bartec HCL 600-T3-10-3 The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

High alloy stainless steel round steel, 1.4104, X14CrMoS17, , new -75% We hereby give a bundle of a cold-drawn round steel, 1.4104. - Diameters 15, 20, 25, 30, 35, 40, 50, 60, etc. - Lengths approx. 3 to 3.5m, including some shorter pieces - Sales weight is approx. 800 to 1000kg - Submission as a total item - Before selling, all parts are tested with a spectral analyzer, so we only supply this material. - Pick-up by the customer is also possible - We have set an absolute special price here - If you have a VAT number, we will be happy to issue you with an invoice without VAT. - We have the round steels from a raw material warehouse of a certified company - Factory certificates not available.

Available in stock 1 x NEVER USED Capstone IGBT. Most commonly used for Microturbines C60. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Perkins Emergency Power Generator 22 kVA + + NEW - Year of construction 2023 + + - - - - - Engine: - Manufacturer: Perkins - 4 cylinders -Diesel -Water-cooled - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 20 / 22 kVA - 230 / 400 volts - 50 Hertz - AVR controller - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 190 x 85 cm - Weight: 700 kg - Tank volume: 140 litres - Sound level: approx. 60 dB (7m) - Fuel consumption: 3.5 l/h (50%) / 4.7 l/h (75%) - - - - - Other: - An integrated socket package can be ordered for an extra charge - - - - - Scope of delivery: - Mitsubishi generator set 20 / 22 k ...

Available in stock 2 x Used Capstone Ignition Exciters. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Spark Rate: 5.5 +/- 1.0 SPS Dute cycle: 30 seconds ON: 5 min off Input: 10-30 VDC

Kuka KR 60 robots are known for their adaptability and flexibility to a variety of applications. They can be precisely programmed offline, are very dependable for process planning, require little maintenance, and are equipped with motors and gearboxes that ensure high performance in cycle times and accuracy. The repeatability of the KUKA KR 60 HA robot is 0.05 mm. Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 HA Condition: USED (Will be painted according to your request) Year: 2015 (2012 option is also available) Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inv ...

Available in stock 1 x Used Capstone UCBE ASSY. Complete with User Connection Board (P/N 508598-030). The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

barfeed Iemca mod.CS112/31 - tool eye - some accessories - Fanuc 0T Control

Kuka KR 60 robots are known for their adaptability and flexibility to a variety of applications. They can be precisely programmed offline, are very dependable for process planning, require little maintenance, and are equipped with motors and gearboxes that ensure high performance in cycle times and accuracy. The repeatability of the KUKA KR 60 HA robot is 0.05 mm. Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 L30 HA Condition: USED Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant Not Included: Gripper & The Base Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer ...

Available in stock 1 x Used Capstone Pre-charge LCM. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Deutz AG Engine: TCD 4.1 L4-SV Engine No.: in production Power: 115 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Diesel Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-D Gene. No.: in production Generator power: 100 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Hand & Remote Start Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length  ...

Available in stock 1 x Used Capstone LCM Capacitors Module. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 731 GE Engine No.: 5312990071 Power: 153 KW Cooling: Water-cooled Occasion: Electric 12 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL 044 J Gene. No.: 39796800001 Generator power: 150 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length ap ...

Available in stock 1 x Used Capstone Fuel Manifold. Solenoids Asco MP-C-103 120 PSI Natural Gas each solenoid 24/DC Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

KRC4 KR60 (L30) & KL 1000/2 LINEAR TRACK Some common applications: - Additive Manufacturing - Assembly - Depalletising - Palletising - Material Handling - Dispensing Model: KR60 (L30) HA Pay Load: 30kg or 60kg Bjjjxatspmq Arm Reach: 2033kg or 2429kg Condition: USED Year: 2013 Controller Cabinet: KRC4 Included: Manipulator + KRC4 Control Cabin + All Wire Sets + Teach Pendant + 8m Linear Track Not Included: Gripper Linear Track Model: KL 1000/2 Year: 2013 Length: 8 meters Condition: USED, well working Please get in touch with us for a quote and also the refurbishment options. As PLC Merkezi EOOD, we have more than 300 robots in our inventory and deal with KUKA, ABB, FANUC and Motoman brands. We also offer custom engineering services and design for your specific production needs.

This combi steamer from the premium manufacturer Rational is a CombiMaster® Plus with 20 x 1/1 Gastronorm inserts in electric design. Please note that this device is in extremely well-maintained condition. The device has undergone an extensive inspection in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 18,920 net. The price quoted is net plus 19% VAT. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany. Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment s ...

Available in stock 1 x Used Capstone Diesel Fuel Manifold. Most commonly used for Microturbines C30. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Volvo Engine: TAD 733 GE Engine No.: 5312982207 Power: 201 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Leroy Somer Generator type: TAL044-M Gene. No.: 39664900008 Generator power: 200 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.200 Height approx. mm: 2.295 Length app ...

This combi steamer from the manufacturer Rational is a CombiMaster® Plus with 20 x 2/1 Gastronorm inserts in electric version from 2012. The combi steamer is the XXL version and offers space for 20x 2/1GN or 40x 1/1GN The device has been tested in our in-house workshop and is fully functional. The RRP. for this combi steamer is € 27,110 net. Service: We would be happy to put you in touch with a certified Rational customer service throughout Germany Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This device is the optimal choice if you are looking for a classic combi steamer that you want to operate manually. Our used equipment service for you: •6 months warranty on all electri ...

Busch BLS Die-Cutting machine for labels Age: 2017 Max. die cut size: 230 x 320 mm Min. cut size: 20 x 20 mm Max. stack height: 190 mm Die-Cutting pressure: 5700 kg Max. -Cutting strokes: 16 p/min Max. Performance: 960,000 sheets/hour With trolley and delivery tray With control panel With light barrier With waste conveyor With different die tools The die-cutter is most commonly used for cutting contours of large-sized labels, brochures, children's booklets, credit and loyalty cards, for die-cutting in a two-up system and for counter-pressure cutting with special material for inmould labels. The machines process high volumes of all types of products. These are just some of the wide range of items produced. Labels are, of course, the most important: -Labels of all sorts -Large-sized labels for tins and jars -Inmould labels -Stitched, folded and glued brochures  ...

The iCombi Pro is the latest combi steamer from RATIONAL. The iCombi Pro 20-1/1 Electric model with 20 shelves GN 1/1 New is easy to use, even for unskilled personnel, as you can achieve outstanding food quality without the need for supervision. The super-fast intermediate and self-cleaning keep your device squeaky clean. It is a young used combi steamer from 01/2023. The RRP is € 25,520 net Availability: available directly from stock in week 09/2024 The indicated price is gross incl. 19% VAT. Service: We would be happy to provide you with a certified Rational customer service from master craftsmen, within a radius of approx. 100 kilometres from our location (postal code: 35418) Are you looking for a specific type of Rational device? Ask us, we have access to an extensive range of used and new goods. We will be happy to advise you on all types of devices, whether S ...

Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Vertical machining center FAMUP MMV 160 CNC Fanuc CNC Fanuc 18i Table 2000x600 X 1600 Y 600 Z 600 Quick: Z 30 m / min X, Y 20 m / min Spindle 10000 rpm ISO 40 13.5kW max 30 tools high pressure Weight: 8200 kgs The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several axles of motion and a automatic tool exchange system and sometimes multiple pallets, X axis: 1600, Y axis: 600, Z axis: 600, CNC type: Fanuc 18i, Spindle speed RPM: 10000

Agitator with thermoregulator complete with structure and accessories (Zanelli s.r.l. brand). Year: 1999 - nominal power 25Kw - type of impeller turbine. Attached some photos. Price negotiable

FETTE TABLET PRESS, MODEL P3100 Year of construction: 1992 55 station rotary double sided tablet press. Designed for high volume production of a wide range of tablets with an output of up to 594,000 tablets per hour. Machine size: 1650mm x 1600mm x 2900mm height (with vacuum units fitted, or 2000mm high without them) Approx. weight: 3,750kg Key information: - Punch/Die type EU-BB - Maximum fill depth: 18mm - Upper punch entry: 2mm – 6mm - Maximum tablet diameter: 13mm - Maximum tablet thickness: 8.5mm - Initial compression force: 20kN (2 ton) - Maximum compact force: 100 kN (10 ton) - Die plate speed: 15-90 rpm - Fitted with 20kN (2 ton) pre-compression station - Upper punch body lubrication and keyed upper punch bores - Variable frequency drive - Two Stainless Steel PIAB vacuum conveyors mounted on the top of the machine for delivering bulk product - Emer ...

Available in stock 1 x Used Capstone BCT Inductor Module. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

turning diameter: 500 mm turning length: 1500 mm control: Siemens 802 C swing diameter over bed slide: 280 mm spindle bore diameter: 82 mm number of controlled axis: 2 turning speed range: 20- 3000 U/min rapid speed: 5 m/min number of tapers in turret head: 1 Multifix C tail stock: Ja MK 5 power requirement: 7,5 kW weight of the machine ca.: 3,0 t dimensions: 3,3 x 1,7 x 1,7 m Used Teach In CNC- lathe - coolant system - Multifix C station - 3 jaw chuck - some tool holders The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This is a 150 litre pressure cooker from the premium manufacturer Küppersbusch (Phoeniks), type KCF0409 (002152). Emptying is carried out without any problems via a safety drain tap. The pressure cooker has an electronic temperature controller as well as a KCI touch panel control (Inovative). The device has undergone a major inspection in our in-house workshop and is fully functional. The pressure cooker kettle is completely unused and in top condition. The RRP for this device is €19,165. The price quoted is net plus 19% VAT. Our used equipment service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase  ...

Moisture Analyzer from Mettler Model Type HB 43 - S. The instrument powers on but and it is working but sometimes after a while it turns down. We can not fix it so we are selling it for parts as a non-working condition. The Halogen Moisture Analyzer is used for determining the moisture content of almost any substance. The instrument works on the thermogravimetric principle. At the start of the measurement the Moisture Analyzer determines the weight of the sample, the sample is then quickly heated by the integral halogen heating module and the moisture vaporizes. During the drying process the instrument continually measures the weight of the sample and displays the reduction in moisture. Once drying has been completed, the moisture or solids content of the sample is displayed as the final result. Of decisive importance in practice is the rate of heating and even heating of the sur ...

This is a rectangular pressure cooker FER250 from Küppersbusch. The device is equipped with the innovative KCI touch panel control and has a low-maintenance, closed PERMAPRESS system. The cooking kettle is in top condition. The device has been tested in our in-house workshop, provided with predictive maintenance work and is fully functional. The RRP for this device is €29,970 net. Contact us for your special offer! Our service for you: •6 months warranty on all electrical parts • High-quality branded appliances at fair prices • Professional Overhaul / Inspection & Professional Cleaning • Tested & fully functional - or money back •Shipping or self-collection can be flexibly selected • Expert advice - before and after the purchase • Provision of operating instructions, connection diagrams and spare parts •Testing according to DGUV V3 seal Technical de ...

Available in stock 1 x Used Capstone FB RFC Heat Exchanger. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Key data: 300 , 49 , 28

Now fully refurbished is this four tie-bar BOY 30 tonne clamp machine with Dipronic controller . The Dipronic controller fitted to this machine and other ‘D’ series has stood the test of time and is now even demanding a premium. The controller and setup of the machine is straightforward, easy to problem solve and great for learning. Without expensive computer controlled systems, the cost of any repairs are often very low and easily carried out. The machine offers excellent platen dimensions and tie-bar clearance for the footprint, these machines are some of the most popular in the market for their niche. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machi ...