simonazzi sidel used for sale

- Fully automatic water bottling line, from blowing to shrink/unit pack formation, and palletizing. (Bottle preform in - at the end the finished pallet is foiled out - this is how it works simplified) Currently: 2 liter PET, carbonated and still mineral water. (Possible upgrade to 0.5, 1.5 liter etc.) In the case of a 2-liter product: nominal capacity 8,500 bottles/hour (Productivity is proportionally higher in the case of a smaller volume) The power of the machine line can be further increased (the machine with the lowest power determines the maximum power of the line) - nominal capacity 8,500 b/h / 2L (b/h = bottle/hour) - compressor: Kaeser G1400 40 Bar - blower: Siedel SB016 No109: 17,500 b/h - air conveyor: Laffranchi - conveyor and buffer track - filling machine: Sarcmi RG8 202 1510/84 Selenia 70/8 02.076: 12,000 b/h - labeller: Sacmi Opera Ser.no: 10116262: 22,000  ...

Used SIDEL ROLLQUATTRO F45 Labeling Machine up to 20000 bph Introduction of the Used SIDEL ROLLQUATTRO F45 In the dynamic realm of beverage manufacturing ensuring accuracy and efficiency in labeling processes is paramount This is exemplified by the comprehensive work performed by the used SIDEL ROLLQUATTRO F45 labeling machine renowned for its capacity to handle up to 20000 bottles per hour bph which stands as a testament to cutting edge labeling technology Technical Specifications Introduced by Sidel in 1999 the SIDEL ROLLQUATTRO F45 is specifically engineered for PET containers Its versatility shines through as it can accommodate bottle sizes ranging from 0 33 L to 1 20 L ensuring adaptability across various product lines Operational Details Powered by 36 meticulously designed plates and mechanical cams the machine guarantees precise label positioning with each cycle Moreover its count ...

TRIBLOK ALSIM (Sidel) from the production of mineral water from Western Europe, still in production, dismantling by a professional company Mark ALSIM Sidel Type Washer/Filler/Sealer Year of production 1997 Dimensions Length L 7564 mm Width W 8700 mm Height H 3446 mm Description Alsim Rinser Asmojet (1997) and 1x Alsim Filler RV.P (1997), capping machine; lots of spare parts Power supply 380V 50Hz three phase Voltage 24V Power 32.5kW Syrup feed - pressure 1 - 1.5 bar Water supply-pressure 1 - 1.5 bar CO2 power supply 10 - 12 bar Compressed air 6 bar Air consumption 500Nl/min Compressed air connection ½ gas CO2 power supply DN25 Water supply DN65 Product output DN100 Product power DN50

LINE FOR FILLING PET AND GLASS BOTTLES WITH CAPS AND CAPS ALL in ONE Produced until May 2022, taken straight from production by us Can fill PET bottles of various heights, glass bottles with plastic stoppers and glass bottles with caps THE LINE NEEDS RENEWAL, was dismantled from existing production, the owner produced without a PET blow molding machine, ordered ready-to-use empty 1.5 L PET bottles. He also filled 1 L glass bottles on the same line. In addition to the capping machine, it also has a capping machine. The bottleneck is a carbonator (7000 l/h). LINE Consisting of: Filling machine 50 filling nozzles Brand: Winterwerb Type: Combilima Year: 1977: Capacity: 14,000 pcs/hour. Electrical connection:380 V Weight:10600 kg Total dimensions L 5850 mm Total dimensions W 3150 mm Total dimensions H 2300 mm Description Minimum bottle height 150mm; Maximum bottl ...

Manufacturer : Sidel Model: 99000863608   Power supply: 220 V Cutting capacity: ? 60 - 160 mm Maximum length 400 mm Maximum number of simultaneous cuts: 4

Sidel Cermex SW 21.40 case packing machine Sidel Cermex SW 21.40 case packing machine Manufacturer: Sidel Type: SW 21.40 Year of manufacturing: 2009 Available: Immediately Speed max: 11,000 cartons/min Length: 150/450 mm Width: 140/375 Hight: 110/400

Overview This complete can filling line for CSD & Beer was manufactured 2012 by French company Sidel. The line is still set up but no longer in use. Techn. Details Capacity: 27,000 cans per hour Beverages: Carbonated soft drinks, Beer Can type/Lid: 330 ml with 202 super end double seam Components Sidel Sweep off A/Z empty can depalletizer Magnoni vacuum transfer Magnoni gravity rinser Sidel Starcan MS 50V filler Ferrum F 706G seamer Sidel Starblend D3 EX 0433 EX460 mixer Sidel ML 2.4.ST1 CIP tank (4000L) Sidel CWD35/144 pasteurizer Magnoni can dryer (after seamer) Magnoni can dryer (after coder) Sidel TSP3 SDI BW tray & shrink packer Manual palletising Rotoplat semi-automatic pallet wrapper Conveyors

Overview  The blowing machine was manufactured by Sidel in 2004 and has only been used by a mineral water company. The machine has been regularly maintained and is in good condition. The seller bought a bigger machine, therefor this machine is available for sale. Technical Details  Capacity: 9,600 bph with 1.5 l and 12,000 bph with 0,5 l Number of cavities: 8 Formats / moulds included: 1,5l Bottle neck: PCO 1881 and 29/25 Additional equipment  Preform kipper Preform hopper Preform feeder

Overview The blow moulder was built in 2011 by French manufacturer SIDEL. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details        Working hours: 37.289 h Capacity Max. 32.000 bph Recently produced at 25.600 bph at 2.0L Number of moulds: 16 hot or cold molds Molds: Hot molds up to 75°C, or standard Equipped with quick change Oven type: Sidel Universal Eco2 C3 special filters Number of heating modules: 20 modules Neck personalization: 38 mm Machine was regularily maintained                           Machine equipped with:                     Sidel preforms tipper Sidel preforms hopper & feeder AGR preforms disinfection Sidel Predis Ultra Clean Vulcanic water/oil thermoregulator Sidel electrical cabinet Sidel control panel Sidel PCC

Used blow molding Sidel SBO 12 Series 2 The Sidel SBO 12 Series 2 represents a culmination of this evolution boasting advanced features and capabilities Over time blow molding machines have become indispensable in modern manufacturing Reliable Performance and Durability of the Used blow molding Sidel SBO 12 Series 2 Moreover the blow molding machine stands out for its exceptional performance and durability With a modest operational lifespan of 45 000 hours it has proven to be a reliable workhorse in the production line Its robust construction and precise engineering ensure consistent quality and productivity making it a valuable asset for manufacturing operations Comprehensive Maintenance Support In addition maintenance and servicing are crucial aspects of ensuring the longevity and performance of blow molding machines Sidel a leading manufacturer in the industry offers comprehensive sup ...

Stripping Device, Varioplan System, Mabeg Non-Stop Feeder with Pre-Loader, Non-Stop Delivery, Centerline, Elevated, Sidelays On Operator And Off-Side, Formats: Max. 750x1050mm, Min. 350x400mm, Max. Cardboard Thickness: 1,8mm, Max. Corrugated Cardboard Thickness: 3mm, Speed: 9000 Sheets/Hour

Bottle table 1,4 x 4,5m More then 300 machines new and second hand on our seema .de

Vehicle data: Make: Komatsu, Type: WA380-3H, Drive type: Diesel, \Year of manufacture: 2000, Operating hours: 4990, Internal No.: 3952a, Mast data: Overall height: 3320 mm, Fork carriage: mm, Dimensions: Length: 8000 mm, Overall width: 2780 mm, Overall height: 3320 mm, Net weight: 19000 kg, Battery & charger: Description & Optional equipment: Attachments: LOADING BUCKET width: 2800 mm Special equipment: Heating, full cab, Front tyres: 2 x 23 5-25Air / Rear tyres: 2 x 23 5-25 / Air / Description: In addition to this Komatsu model, we have about 200 heavy-duty forklifts, compact forklifts, forklifts & sideloaders in our warehouse in Hamburg and Gdansk. Visit our homepage -

Overview  This hot glue labeler from Franch manufacturer Sidel was built in 2007. The machine is still in production and be viewed in person at any time.   Technical Details   Hot glue labelling for PET-bottles  Capacity: 36,000 bph   Formats: 0.5l, 0.75l, 1.5l   Running direction: right-left  Servo drive bottle plate  Automatic label roll changer  Incl. label inspection to control the presence of label   

Used Isobaric Bottling Line Sidel up to 30000 bph Operational Capacity of the Used Isobaric Bottling Line Sidel up to 30000 bph The used Isobaric Sidel bottling line up to 30000 bph epitomizes a cutting edge technical solution for the beverage industry Its operational capacity of 30000 BPH positions it as the optimal choice for large scale production enabling it to seamlessly handle substantial volumes without compromising process quality Furthermore this high capacity makes it particularly suitable for companies seeking in fact for production and efficiency Isobaric Filling in the Used Isobaric Bottling Line Sidel up to 30000 bph The isobaric filling method deployed by this line ensures indeed the stability and integrity of the final product Throughout the bottling process it maintains a constant pressure inside the bottles thereby ensuring the even distribution of the liquid and preser ...

Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25           Working hours: 47.000 only            Machine was regularily maintained       Machine equipped with:                     Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request

Overview This labeller was built in 2015 by French company Sidel. The machine can be viewed in person.  Techn. Details Capacity: up-to 25 000 bph (depending on label length) Label position: wrap-around Label material: plastic, from roll

Overview The blow moulder was built in 1999 by French manufacturer SIDEL. The machine is in very good working condition, still in production and can be viewed in person. Techn. Details Current capacity: 23.400 bph at 1.25L Working hours: 40.000                   Number of moulds: 18       Moulds type: Shell type quick change Formats produced: 1.25L Bottles: Cylindrical petaloid base Oven type: Sidel Neck personalization: PCO 1881  Type of preforms: with recycled PET resin Machine was regularly maintained     Machine equipped with:                     Sidel preform tipper Sidel hopper with cover & feeder Sidel preforms unscrambler Sidel preforms infeed rail Blowing station for 18 moulds Sidel electrical cabinet with Siemens Sidel PCC drive & control