ship engine used for sale

We offer 6x Piston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

We offer 6xpiston+linder-kit with ring set + bolts + liners with O-rings Al stock immediately available at stock: Piston: 6217-31-2130 Bolt : 6211-31-2410 Ring set: 6217-31-2030 Liner : 6218-21-2210 Net price / rate = 450 plus 19% tax MIW GmbH Motoren-Instandsetzungs-Werk North-West-Ring 8 D-27404 Zeven/Germany Phone: 0049(0) 4281-950583 Fax: 0049(0) 4281-950585 E-mail: info@miw-zeven

power capacity: 63 kW volt: 380 V ampere: 204 A weight of the machine ca.: 0,76 t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Now available: MaK M25 6 cylinder engine block in stock and ready to be sold. Ask us for more information and prices.

8 cyl. Mercedes V engine OM 402, 225 HP, starter motor, alternator, fan

TO WHOM IT MAY CONCERN WE VE 3 PCS BERGEN KRG-9 COMPLETE ENGINES AT OUR STOCK. ENGINES HAS BEEN REBUILT ON 2006. ENGINES PRESENT CRANK SHAFTS HAS STANDARTS SIZE CLASS HARD STAMP ON IT. ENGINES MAINTENED WELL. ENGINES ARE TURNING W?TH GOOD SUCT?ON ALL ENGINES READY TO TRANSPORT TYPE KRG-9 ENGINE NO 3186-3187-3188 BUILT YEAR 1986/REBUILT 2006 KW 1825 SPEED 750 MADE IN NORWAY ENGINES TURBO CHARGERS ARE ABB VTR 254-P11 IF YOU VE ANY FURTHER QUEST?ONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST Regards; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

; Power [PS]: 273; Engine: Deutz BF6M1013FC

; Power [PS]: 273; Engine: Deutz BF6M1013FC

ISM Shibaura N843L, 3-cylinder water-cooled diesel engine, displacement 1,662 cc, power 26.1 kw/35 hp/2,700 1/min., functional. We supply diesel engines 1-6 Zyl., various products: Deutz, Daedong, Hatz, Hinomoto, Iseki, Isuzu, Kubota, Lombardini, Perkins, Shibaura, Ruggerini, Yanmar etc. Performance of 4.5 to 100 kw, used, partly new. Gasoline engines: 1-2 cylinders of 3-15 kw from B & S, Honda, Kohler, Robin, Wisconsin. Various coolers, starters, light machines and silencers in stock, hydraulic pumps and hydraulic motors. Jodau Kommunal-, Umwelt- & Grünpflegetechnik Inh. Joachim Dau 24941 Flensburg, Wieselhof 29

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

DAF 825, overhauled

DAF 825, used

Dear's Sale, used 2 complete engine Deutz BA6M528 Also, cover, piston, liner, conrod new/used, fuel pump, 8cyl cranksaft etc any parts. Brgds Hakan KUSCU +905323642509

DEAR'S SALE, COMPLETE Mak 6M331 engine & reduction gear Reinjest WAV1400 type Ratio 2.5/1 Std cranksaft good condition Brgds Hakan KUSCU +905323642509

; Power [PS]: 174; Engine: Deutz BF6M1013M

We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!

MITSUBISHI MARINE ENGINE - S12A2 - MPTK 910 HP - 701 KW 1940 RPM COMPLETE WITH PANEL

Yaskawa AC servomotor with Alpha gearbox SGMAH-08AAA61D-OY, 750 W, V 200, A 4.4, Nm 2.39 r/min 3000, Ins. b

TWIN DISC MARINE GEARBOX ,MG 5170 4.5:1 S/N: 3AP-957

; Power [PS]: 174; Engine: Deutz BF6M1013M

ABC ENGINE 8MDKC / 883 KW / RUNNING TAKEN OUT

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

; Power [PS]: 80; Engine: Deutz BF4M2011C

; Mileage [km]: 6; Power [PS]: 320

2 X DEUTZ MARINE ENGINES V12 816 626 HP@1800 RPM WITH TWINDISC MG5202 2.48:1

; Power [PS]: 80; Engine: Deutz BF4M2011C

; Power [PS]: 340; Engine: Deutz TCD2013L064V

; Power [PS]: 340; Engine: Deutz TCD2013L064V

; Power [PS]: 340; Engine: Deutz TCD2013L064V

; Power [PS]: 340; Engine: Deutz TCD2013L064V

Cummins Engine Building year 2010 Power 600@1800 rpm low hours

2x KUMERA GEARBOXES COUPLED WITH SCANPUMPS GEARBOX RATIO 1.25:1 PUMPS 1800 RPM / 1642 M3/H

MITSUBISHI MARINE ENGINE - S12A2 - MPTK / 1940 RPM / 701 KW /940 BHP

CUMMINS C110D 2 - 110 KVA BRAND NEW

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven

For sale is a used/refurbished gas engine Liebherr G9512. Built: 2013 Operating hours: • since the overhaul 4,000h total 12,000h

Scania DC12 crankshaft reon used+tested and ground for all models Scania DI+DC 12 motors Number: 1743584/2176830/10574410

MITSUBISHI S12 R PTA 1080 KW 1500 RPM

MASSON RSD 401 RATIO 4,625:1

LONG BLOCK DIESEL ENGINE CAT C7C/D recondioned in exchange Lisperm:engine block,crankshaft,camshaft,conrod+piston,oil pump,oil tub,front+rear closed Cylinder head mounted,valve lid closed

TWO PCS MAN 2842 LE 401 - REBUILD 2019 - 0 HOURS AFTER COMPLETE OVERHAUL

Used, partially repaired, tested truck engine in exchange The old part deposit in the amount of 2,500.00 Euro will be credited again regardless of the condition of the old engine 6-month warranty Price plus VAT and shipping

KTA 19 M3 600 HP / 1800 RPM SN 37169224

DOOSAN PU126TI 395 HP - 2100 RPM / 0 HOURS AFTER OVERHAUL / NEW PISTON RINGS / CONNECTING RODS / BEARINGS

Fuselage engine Actros OM 501 LA - Euro 2 - Type 541.922 - Truck engine in exchange The engine is completely overhauled with new pistons, cylinder bushings, new bearings and new oil pump. The cylinder heads are completely overhauled with new valves and valve guides. The compressor crankshaft and compressor connecting rods are pre-assembled. The old part deposit in the amount of 1,500.00 Euros will be credited, regardless of the condition of the old engine. Warranty: 1 year without KM limit Price plus VAT and shipping

ZF BW 161-1 SN 98.0637 REDUCTION 4.531-1

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

ZF 2050 A 2,467:1 SN SN 50014798 RATIO 2,467:1 DRY WEIGHT 460 KG VERY GOOD CONDITION RUNNING TAKEN OUT