sheet metal punching used for sale

Line for packing cut sheets Sheet packing system for a sheet metal cross-cutting unit. The packaging system cooperated with the sheet cross-cutting line. Basic parameters: Supported species: steel, aluminum Material thickness 0.4-4 [mm] Material width: Min. 500 [mm] Max. 1500 [mm] : Packing system prepared to pack material only on pallets or cross beams Maximum weight 5,000 [kg] 1 table Minimum and maximum sheet length: 500-7000 [mm] Width range: 500-1500 [mm] Maximum system speed 40 Automatic transport of parcels from the stacker to the packaging system Total length of the system is approximately 35 m We have a video recording of the operation of the entire packaging system.

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Punching nibbling machine

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Stamping standard

Labeling sheets, 5x 10 sheets SIEMENS S7-SmartLabel 2x 6ES7 392-2AX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: petrol, for 16-channel modules 1x 6ES7 392-2AX10-0AA0 ( 6ES7392-2AX10-0AA0 ) Color: petrol, for 32-channel modules 1x 6ES7 392-2CX00-0AA0 ( 6ES7392-2AX00-0AA0 ) Color: yellow, for 16-channel modules 1x 6ES7 392-2CX10-0AA0 ( 6ES7392-2AX10-0AA0 ) color: yellow, for 32-channel modules New ! Dimensions ( packaging ): 300 x 220 x 30 mm

Aluminum tear plate, aluminum checker plate, checker plate, checker plate -Material: aluminum -Dimensions: 1500 x 2160 mm -Sheet thickness: 2.5 mm -Tear thickness: 4.0 mm -Number: 30 pieces of checkered plate available -Price: per piece -Weight: 24 kg/piece

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,00 mm Positions ATC: 0   OMERA - R 4 / 12 Trimming machine Ø 1200 x 4 mm MACH - ID 6365 Make: OMERA Type: R 4 / 12 YOP: 1990 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Max. workpiece    1200 Ø Maximum sheet thickness    4 mm Length    3.000 mm Width     1.600 mm Height    2.300 mm Weight    2.500 kg  

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 0,0 mm Positions ATC: 0   SPECIFICATIONS Controll   Conventionel   Hydraulic / Mechanical   Hydraulic Capacity Ø x plate thickness  Ø  6 - 42 mm Cutting lenght   L = 6.000 mm mm DIMENSIONS Length   7000 mm Width  1500 mm Height  1500 mm Tubomat 642 bending centre for processing pipes. You can do also Sawing, Deburring, flaring. Tubomat is belonging to the company Tracto technik who is specialised in tube bending machines like the tubomat and tubobend, tubotron.  

Pressure: 0 t X - axis: 0 mm Y - axis: 0 mm Sheet thickness: 8,0 mm Positions ATC: 0   Make Eckold KF 665 Type KF 665 Year 90 er Kraftformer Forming = 8 mm Ram = 0 - 80 mm Speed = 150 / 300 / 600- Model with Potentiometer; limits reverse motion time - Foot switch for motorised adjustment ram - 1 machine for Shrinking, Stretching, Doming, Planishing, Reforming, Flattening, Straightening

Key data: 40

Shearing capacity: 40 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make: GEKA Type: Hydracrop 80 SD YOP: 2010 Large package tooling 5 Working stations 2 Foot switches Stroke adjustable:     70mm Punching force:        80T Capacity Ø x thickness:40 x 20 mm Cutting force:         150T Throat:                500mm Capacity L profile:    130 x 130 x 13 mm Power:                 9kW Length:                2.200 mm  Width:                 1.200 mm  Height:                2.200 mm  Weight:                2.800 kg

Shearing capacity: 100 mm Nibbling capacity: 60 mm Punching capacity: 100 t Stroke adjustable:     60mm Punching force:        100T Capacity Ø x thickness:50 x 15 mm Cutting force:         100T Throat:                510mm Capacity L profile:    120 x 13 mm Length:                2.200 mm  Width:                 1.400 mm  Height:                2.200 mm  Weight:                2.000 kg 

Shearing capacity: 4 mm Nibbling capacity: 0 mm Punching capacity: 0 t Make Eckold 46 Type KF 460 Year70 er Walter eckold kraftformer Capacity = 4 mm Speeds 150 - 300 rpm Troth = 460 mm  

specifications: Max sheet width 3,000 mm Max sheet thickness at max yield strength 240 N/mm2 when bending to max. sheet width 35 mm when rounding Bend length 2.2 x S Max passage between rollers 145 mm Roller diameter upper roller 552 mm Underroller 532.4 mm Side rollers 400 mm Number of rollers 4 Powered rollers 2 top and bottom roller Drive of the rollers hydraulically Arrangement of the rollers symmetrically Rotation speed of the rollers 2-4 m/min Adjustable rollers 3 Type of adjustment of the rollers hydraulically Adjustment speed lower roller 0-200 mm/min. Side rollers 0-700 mm/min. Brake of the rollers pneumatic Actuation of the folding bearing hydraulically Operating voltage 3 x 380 V / 50 Hz Display device of the roll positions 4 x optical/analog Weight of the machine approx. 42 to Area 2.71 x 6.4 m Height 3.12 m

Capacity 500 tons Speed 20 spm Bed area 2800 x 1800mm Ram area 2800 x 1700mm Stroke 500mm Die height 1100mm SDAU weight 130 tons

Capacity , ton: 800 Stroke, mm: 320 Strokes/min: 20 Shut height, mm: 900 Bed to ram adjustment stroke, mm: 320 Bed dimensions, mm: 2500x1600 Main drive motor power, kW: 75 Overall dimensions, mm: 4220x3500x8356 Weight, ton: 96,6

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Effort 500t Slide stroke 500mm Number of strokes per minute 20 Slider dimensions 3840 x 2290 x 2360mm Slider weight 17 300kg Adjustment of the distance between the slider and the table 500mm Max. open press height 1300mm Max. open die height 1280mm Min. Closed height of press 800mm Min. closed die height 820mm Height of sliding table 500mm The maximum force of 3 pillows of pressing 100t Cushion plate stroke 200mm Main motor power 75 kW Number of sliding tables (sideways movement) 1 Number of additional drawers 1 Press weight 136,700kg

moving bolster Capacity, ton 500 Centers of pressure 2 Idle stroke rate 20 Distance between the uprights, mm 2800 Shut height, mm 1100 Table dimensions, mm 2800 x 1800 Table gap, mm 2400 x 1250 Ram dimensions, mm 2800 x 1700 Ram stroke, mm 500 Ram adjustment, mm 500 Die cushion adjustment, mm 200 Die cushion stroke, mm 200 Die cushion capacity, ton 100 Main motor power, kW 75 Press weight, kg 120000

Three-roll sheet bending machine, used three-rollers -plate -bending m/c, used Type: UBBD 2.5 x 2000 Manufacturer / make: WMW Built/ new: 1970 Working range: sheet width max. / max. working length: 2000 mm Sheet thickness range / sheet thickn.: max. 2.7 mm Bending rollers / bending rollers: top: 1 piece , bottom: 2 pieces Driven / driven: 2 sub-rollers/ bottom rollers Upper roller diameter / diameter of top roller: 112 mm Bending speed. / speed bending: 7m /min Minimum bending radius / min. bending radius: 130 mm Weight / weight: 700 kg Connection value / loaded power: 4 kW

We offer you here a sheet metal cleaning machine from Jeros, for plates 60x80. If you have any questions or questions, we are happy to provide you with Delivery at an additional cost possible

for cleaning their sheets with oil tank (food oil) for 60x40 cm sheets 2-edge on the short side for 58x78 cm sheets 2-edge on the long side Shipping costs on request

lechrichter, used,       sheet leveller, used,   Type: UBR 10 x 2000 /1-16 Manufacturer / make: WMW Gotha max. sheet width: 2000 mm max. sheet thickness ( St 50): 10 mm    min. sheet thickness / min. sheethickness: 3 mm   Number of straightening rollers: 13 rollers / rollers Directionroller Diameter/diameter of     straihgtening rollers: 145 mm Directional speed / speed of straightening: 16 m / min Bale length / convexity length of rollers: 2330 mm Center distance of directional rollers/ distance b/n rollers centers: 150 mm Support roller diameter / diameter of bottom rollers: 290 mm Number of bottom rollers 21/24 Number of supports (top/bottom): 3 /3 Lifting speed of the traverse / speed   ...

Notching machine make COMACA type N 225 EPAS 4Machine -No: 2612Technical specifications:Knife length 225 mmMax. Sheet metal thickness 42 kg, strength 4.0 mmMax. Sheet thickness 70 kg / VA 3.0 mmfixed cutting angle 90 °Projection 110 mmStrokes per minute 45Cutting capacity 10 tTable size 1050 x 800 mmDrive power 4.0 PSWeight approx. 700 kgWith- inner depth stop- foot switch- 2 adjustable angle stops- without pneumatic automatic stopused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic fixed angle notching machine make KNUTH type KKM 250.6Machine -No: 124780 built in 2002Technical specifications:max.sheet thickness at 45 kg: 6.0 mmCutting length: 250 mmCutting angle: 90 degreesStrokes per minute: 50Table size: 810 x 750 mmHydraulic oil tank: 40 lDrive power: 4.0 kWExternal dimensions approx .: 900 x 900 x 1150 mmWeight approx: 856 kgWith- foot switch- 2 adjustable angle lengthsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data:1 notching tool for presses External dimensions: 345 x 345 x 210 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 550, ------------------------------1 notching tool for presses External dimensions: 250 x 350 x 260 mm used, in good condition: EUR 350, -----------------------------1 notching tool for presses External dimensions: 345 x 345 x 220 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 520, ----------------------------1 notching tool for presses External dimensions: 345 x 345 x 325 mm With- - Clamping T-slots lengthways and crossways used, in good condition: EUR 410, -For drawing see documentsPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are a ...

Hydraulic notching machine make INDUMASCH type FA 250/6Year of construction 1995Technical specifications:fixed cutting head:90°Blade length: 250mmCutting capacity mild steel: 250 x 250 x 6.0 mmCutting capacity stainless steel: 250 x 250 x 4.0 mmTable dimensions approx.: 1000 x 790 mmMain Voltage: 380V 50HzDrive power: 3.0 kWApprox. weight: 810 kgDimensions approx.: 1000 x 1200 x 1250 mmwith- Electrical stroke adjustment with digital display- Inside stop- foot switch- automatic cutting gap adjustmentused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Type: RWM 800 For boxes 600x800 mm Capacity: 500 pcs/h For self-disassembly in 62118 Monchy le Preux, France

sheet metal cleaning machine from Schlee. The machine was built in 2011. Sheets up to 58 cm wide are suitable. Schlee sheet metal cleaning machine Type: Uni-58 Built in 2011 for sheets up to 58 cm wide cleans / brushes oiled mobile on wheels m. fixed Stainless steel More information on request. Dimensions: Height: approx. 115 cm Width: approx. 150 cm Depth: approx. 89 cm

Manufacturer: Tox Pressotechnik Available pieces: 2 Models:CRS 03.226 and CRS 03.225 Serial number: 403484.2 and 403482.1 Weight: 90 kg Pressing force: 50 kN

CNC swivel bending machine make FASTI type 2095-12-3Machine -No: 85295040 built in 1985Technical specifications:Usable length: 1270 mmmax.sheet thickness: 3.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmDrive power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1480 kgExternal dimensions: 2500 x 3600 x 1700 mmWith- CNC stop table 2500 mm- foot switch- Two-handed disengagement- CNC screen control with floppy disk driveSPECIAL PRICE as a spare part dispenser or for reconstructionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make LOTZE type HZK 25 2500/3Machine -No: 1827 built in 1956Max. Working length: 2540 mmMax. Sheet thickness: 3.0 mmmin. Inner bending radius: 4.0 mmMax. Opening width of the upper beam: 300 mmOpening width of the bending beam: 40 mmWorking height: 800 mmDrive power: 3.5 / 2.2 kWDimensions: 4200 x 1400 x 1600 mmWeight approx: 3.75 tWith- gear lever gearbox for opening and closing,xa0xa0xa0 Bending and returnused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic mobile tin hole punch for e.g. control cabinet construction and control construction Manufacturer Alfra Type SKP-1 Punches holes of max 140mm diameter in 3mm sheet metal Round, square and rectangular stamps possible. Punch punch punch tin punch drill tin hole drill monocut gap-plate-hole, hand hydraulics, ball bearing screw, Klauke Alfra Special price

Motorized folding machine make KRAMER type AMaut IIYear of construction 1985Effective length: 1020 mmMax. Sheet thickness: 3 mmMax. Opening width of the upper beam: 290 mmMax. Adjustment speed of the lower and bending beam: 90 mmMotor power bending beam: 2.2 kWEngine power upper beam: 1.5 hpDimensions L x W x H: 1600 x 700 x 1500 mmWeight approx: 1300 kgWith:- backgauge- Footswitch- separate control panel- one-sided bending cheek driveused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Motorized folding machine make KRAMER type AMaut IIMasch. -No: . 45858, year of construction 1985Working length: 2025 mmMax. Sheet thickness: 2.25 mmMmin. Turning width: 5 X sMin. Inner radius: 1.5 - 2 X sAdjustment of the lower and bending cheek: 90 mmfor round bends: 90 mmhighest working position of the upper beam: 190 mmmax. Opening width of the upper beam: 290 mmDrive power: 3.0 / 1.1 kWDuration of a workflow: 7.0 sec.Weight approx: 2450 kgExternal dimensions approx: 3000x1000x1650 mmWith:- Control panel on the right side of the machine- Easy bending angle adjustment on the control panel- optional switching to automatic, semi-automatic or inching mode- Potentiometer for the degree adjustment- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted ...

Motorized swivel bending machine make FASTI type 2095/10/4Machine -No: 91295055 built in 1991Technical specifications:Usable length: 1020 mmmax.sheet thickness: 4.0 mmStroke of the upper beam: 350 mmAdjustability of the lower and bending beam: 80 mmMotor power bending / upper beam: 2.2 / 1.5 kWWeight approx: 1420 kgExternal dimensions approx .: 2113 x 900 x 1500 mmWith- foot switch- Operating modes: individual switching for each work step Automatic operation for a complete work cycle- Bending angle adjustment via digital display- Tear stopATTENTION: The bending beam is torn in 2 external places: and professionally welded.usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. Wald ...

Universal motorized folding machine make STÜCKMANN + HILLEN type AWR / M 2000/2Machine -No: M 05769061, year of construction 1976Working width: 2050 mmMax. Sheet thickness: 2.0 mmlargest passage: 3100 mmOpening width of the upper beam: 250 mmOpening width of the lower beam: 105 mmOpening width of the bending beam: 105 mmlargest opening width: 200 mmDrive power: 0.75 / 3.0 kWWeight: 2850 kgExternal dimensions: 3900x1000 x 1700 mmWith- driven upper, lower and bending cheek- Footswitchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Qty. 1 Second-hand Sendzimir reversing cold rolling mill Mfc.: Waterbury Farrel Type: WZS- Reversing - Sendzimir Rolling Mill type: ZR – 23M – 31”, reversing Z”, 1 – 2 – 3 – 4 Built: 1977 Modernised in 1991 Capacity: approx. 50 000 T/annum Strip width: 370 – 740 mm Strip tension: controlled up to 10 Tons Thickness: Entry: 3.5 mm Exit: 0.20 mm Speed: 183 – 368 m/min. Min. exit thickness of material M70-A: 0.04 mm Last pass from 0.12 to 0.04 mm Qty. 1 Second-hand roll grinder Mfc.: Landis Type: L-28A Roll dia.: 40-100 mm Roll length: up to 1500 mm Qty. 15 Containers

Motorized swivel bending machine make HERA type UM III 2500 x 5 mmMachine -No: 2013Technical specifications:Working width 2500 mmMax. Sheet thickness 3.0 mmSmallest shelf height with the greatest sheet thickness 16 mmsmallest inner bending radius with the greatest sheet thickness 4.5 mmMax. Opening width of the upper beam 350 mmMax. Adjustability of the lower andFolding beam 125 mmlargest diameter when rounding 250 mmWeight approx 3100 kgMotor power 5.5 HPWith- foot switchusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic swivel bending machine make JORNS Norma-Line-125-SH-OP / 2-8Machine -No: 9778-01 built in 1997Technical specifications:Bending length: 8000 mmInsertion depth: 1000 mmmax.sheet thickness steel: 1.25 mmmax.sheet thickness aluminum: 2 mmmax.sheet thickness VA: 0.80 mmmax.operating pressure: 140 barStroke of the upper beam: 200 mmNumber of bending cylinders: 4Drive power: 4.0 kWDimensions: 8500 x 1300 x 1800 mmWeight approx: 4.9 twith- OP 2100 axis control (9 memory locations)- Guide rail with roller shears- 2-pedal foot control- Emergency stop raillittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-fold combined hydr. Sheet metal working machineHydraulic folding machine - press brake - guillotine shearsMake GRIEBEL type SAS 75-30-4 built in 1981Technical specifications:PRESS BRAKE PERFORMANCEWorking pressure: 75 tWorking length: 3050 mmProjection: 120 mmStroke: 270 mmForward speed: 37 mm / sec.Working speed: 0 - 30 mm / sec.Return speed: 45 mm / sec.Number of angle programs: 6PERFORMANCE BENDING MACHINELength: 3050 mmSheet thickness: 3.0 mmProjection: 400 mmStroke of the upper beam: 290 mmForward speed of the upper beam: 37 mm / sec.Return speed of the upper beam: 42 mm / sec.Working speed of the bending beam: 45 ° / sec.Number of bending programs: 6PERFORMANCE TABLE SHEARSCutting length: 3050 mmmax.sheet thickness: 4.0 mmCutting angle: 1 ° 20´Knife strokes: 10 - 15 H / min.Number of hold-down devices: 20Pressure of the hold-down device: 250 kpProjection: 270 mmGENERAL DATA:El ...

Motorized swivel bending machine make FASTI type 212 30/4Year of construction 1980Technical specifications:max.working length: 3040 mmmax.sheet thickness: 4.0 mmOpening width of the upper beam: 350 mmAdjustability of the bending and lower beam: 80 mmBending angle preselection: 0 - 180 °:Drive power upper beam: 4.0 kWDrive power bending beam: 7.5 kWWeight approx: 6500 kgExternal dimensions approx. (Without back gauge): 4500 x 1200 x 1800 mmWith- FASTIMATIK electronic control- 2-way goat tool- additional bending railsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual bending machine make REINHART München type UBM IIMachine -No: 127Bend length: 500 mmBending capacity at 37 kg strength: 1.0 mmBending capacity at bending length 300 mm: 1.5 mmBending capacity at bending length 200 mm: 2.0 mmOpening width of the upper beam: 20 mmDepth of the back stop: 300 mmOutside dimensions approx: 900 x 600 x 280 mmWeight approx: 150 kgWith- many different additional tools- manual backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swivel bending machine make HERA type U IIIYear of construction 1974Technical specifications:Bending length: 1540 mmgreatest sheet thickness at 40 kg: 4.0 mmSmallest shelf height with the greatest sheet thickness: 20 mmOpening width of the upper beam: 350 mmAdjustability of the lower and bending beam: 125 mmlargest diameter when rounding: 250 mmExternal dimensions approx .: 2500 x 1000 x 2000 mmWeight approx: 1000 kgWith- counterweight- Hand wheel for height adjustment of the upper beamused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual swing bending machine Fabr. Schechtl type UKV 2002 x 1 Masch. -No: 6412 Year of construction 1995 with segmented bending tools Technical specifications Working width 2000 mm Max. Tin thickness steel 1.0 mm Max. Sheet metal thickness ALU 1.5 mm Max. Tin thickness Va 0.70 mm Opening width of the upper wang approx. 100 mm Outer dimensions L x B x H 2600 x 800 x 1200 mm Weight approx. 625 kg with - split tools up and down - Weight equalization for top and bending cheek - Foot pedal for close the top cheek - Scale for bending angle left and right - Manual background Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC-controlled hydr. Sheet metal shearing machine make WEINBRENNER type TSV 6/3050Machine -No: 687 T built in 1987gr. Working width: 3050 mmFor sheets with 45 kg strength up to: 6.0 mmclear column width: 3160 mmclear stator projection: 200 mmCutting angle min./max .: 1/2 °Backgauge adjustment: 1000 mmNumber of hydr. Hold down: 12Number of strokes min./max. (depending on cutting length and material thickness): 22/36 / minHydraulic drive: 380 V, 15 kWTable height above hall: 900 mmDimensions incl. Backgauge, without frontSupport arms: 4100 x 2300 x 2100 mmWeight approx .: 8500 kgWith- Control in swivel control panel CYBELEC CNC 1000- compl. elec. Device with control device in the large switchingxa0Cabinet attached to the side of the machine- Backgauge control with programming- Material quality code- Sheet thickness preselection- stroke length adjustment- Contact cutting device- Scrapweed- ...

Hydr. CNC-Sheet metal Shear make GWF MENGELE type S 8 - 1500Machine -No: S2544, built in 1989Max. Cutting length: 1550 mmMax. Sheet thickness: 8 mmlateral. Discharge i. Stand: 50 mmSheet metal passage: 16 mmCutting angle adjustable: 2 ° 30 - 0,5 °Empty strokes: 25 - 32Number of hold-downs: 8Cutting pressure: 280 barHold-down pressure: 80 barOil filling: 300 lDrive power: 18.5 kWTotal connected load: 20.1 kWExternal dimensions: 2130 x 3260 x 2360 mmWeight: 5.8 tWith- CNC control SIEMENS S 5 for numerical sheet bending- Holding device mot- Sheet metal removal with conveyor belt- Cutting gap and cutting angle m. Control programmable- Spare knife- Schermesser for 750 kg strength- Separate hold-down z. Cutting after crack- Hold-down pressure adjustable and readable from the front- 2 rocker stops- Finger guard with recessed grip- balls in the support table- Angle stop m. Norius- Footswitchus ...

CNC hydraulic guillotine shears FAbr. HACO HSLX 4010brand newTechnical specifications:Max. Cutting length: 4050 mmMax. Sheet thickness for ST 4 10 mmMax. Sheet thickness VA (1.4301): 6 mmTable height: 1030 mmCutting angle: 0.5 - 3 degreesCutting gap adjustment: 0.05 - 1.0 mmNumber of hold-down devices: 23Back stop area: 1000 mmBackgauge speed: 110 mm / secStroke rate: 7-11Working height: 1030 mmrequired oil filling: 220 litersLength of the angle stop: 1000 mmHolding device option: 7780, -Length of the support surface: 930 mmMax. Sheet thickness: 8 mmMotor power: 18.7 kWOption control panel on the swivel arm: 930.00Machine dimensions: 5150 x 2050 x 2395 mmWeight: 13 tWith- SC 100T controlwith ergonomic control panel - simple operation directly on the cutting table- enables convenient operation ofBackgauge, retraction and cutting length limitation- Electronic cutting gap adjustment - Cutti ...

CNC sheet metal shears make EHT type TSS 4-20Fabr. -No: 107785, year of construction 1998Technical specifications:Working length: 2020 mmmax sheet thickness at 450 N / mm 4 mmOil volume: 160 lelectr. Connection: 400 V, 50 HzDrive line: 7.5 kWDimensions approx: 2800 x 2150 x 2150 mm, weight approx: 4.5 tWith- CNC control ELGO P 8721- Hold-up device- Scrap chute- foot switch- automatic cutting angle- automatic cutting gap adjustment- 3 angle stops in front- Cutting line lightingin a little used and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic CNC swing cut guillotine shears make KNUTH type KHT D 3006Year of construction 2018Technical specifications:Max. cutting length: 3100 mmMax. sheet thickness: 0.5 - 6.0 mmCutting angle: 1.3°Number of hold-down devices:16Stroke :105mmNumber of strokes per minute:15Working table height: 865 mmNumber of support arms:3Oil tank: 200LMotor power: 15 kWDimensions approx.: 4110 x 2200 x 2100 mmWeight approx.: 7300 kgwith- Sheet metal holding device- D-Touch 7 control with touch screen for motorized backgauge 1000 mm and intersection- foot switchlittle used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools