shear used for sale

Sheet thickness: 8,00 mm void: 0 Table length: 6000 mm Table width: 0 mm Knife length: 0 mm MACH-id  3449 MAKE   Darley Holland TYPE   GS 6000 x 8 mm YEAR   1989 SPECIFICATIONS Controll   Conventionel Guillotine / Lazer / Cutting table   Guillotine Cutting lenght   6000 mm Maximum sheet thickness   8 mm Backgauge stroke X in mm   1000 mm DIMENSIONS Length   6800 mm Width  3500 mm Height  2700 mm  

Long knife, sheet metal and round steel shears -Sheet metal shears: stable -Material: flat steel -Round: up to 15 mm -Square: up to 15 mm

Sheet thickness: 13,00 mm void: 3050 Table length: 0 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIONS Controll   SC 70 Robosoft Guillotine / Lazer / Cutting table   Hydraulic Guillotine Cutting lenght    3050 mm Maximum sheet thickness  13 mm Backgauge stroke X in mm   0 - 1000 mm DIMENSIONS Length  4300 mm Width   2200 mm Height  2500 mm

Ozamech hydraulic guillotine, bending length 3000mm Used machine efficient, sale due to liquidation of the company.

Sheet thickness: 6,00 mm void: 0 Table length: 2050 mm Table width: 0 mm Knife length: 0 mm SPECIFICATIES Besturing  Conventionel Knipschaar / laser snijder /plasma snijder Guillotine   Plaatlengte   2.050 mm Plaatdikte  6 mm Uitlading  500 ! mm Bereik achter aanslag   1000 mm Bron van tafel in kW of Amp. Power 7.5 kW  

Folding table at the rear 12mm aluminum / 8 steel thickness Sharpening knife CNC Backgauge Opening Stroke 190mm

Sheet thickness: 15,00 mm void: 0 Table length: 3200 mm Table width: 0 mm Knife length: 3200 mm SPECIFICATIONS Controll  Conventionel  Guillotine / Lazer / Cutting table   Hydraulic Guillotine Cutting lenght  3200 mm Maximum sheet thickness 15 mm Throat 100 / 400 ? mm Backgauge stroke X in mm  5 - 1000 mm DIMENSIONS   Length  3600 mm Width   2300 mm Height  2200 mm  

Cutting length : 3100 mm Cutting thickness : 10 mm Machine is in good condition

Sheet thickness: 16,00 mm void: 0 Table length: 0 mm Table width: 1250 mm Knife length: 0 mm MACH-id   3066 MAKE   Darley Holland TYPE    GS 1250 x 16 YEAR    1994 REV SPECIFICATIONS Controll       Conventionel    Guillotine Cutting lenght      1250 mm Maximum sheet thickness   16 mm Throat  100 mm Backgauge stroke X in mm   1000 mm Power resonator kW / Amp   22 kW DIMENSIONS Length 1850 mm Width  2600 mm Height  2200 mm  

Sheet thickness: 13,00 mm void: 0 Table length: 3100 mm Table width: 1000 mm Knife length: 0 mm Make HACO 13 mm Type HSLX 3013 Year 2005 haco hslx 3013 with NC system SC 70 Sheet thickness (mm)T = 13 mm Sheet width (mm) L = 3.100 Depth rear gauge (mm)D = 1.000 NC system SC 70 Power 400 V / 22 kW New Euro 45.000  

Punching force : 30 Ton Sharing Force : 25 Ton Machine is in excellent condition

Cutting length : 3000 mm Maximum cutting thickness : 6 mm Machine is in good condition Machine can be sold as set with press brake : https://www.makinaalsat/makinalar/172773/durmazlar-abkant-pres

Sheet thickness: 6,00 mm Sheet width: 2050 mm Depth rear gauge: 1000 mm Make Safan 6 mm Type VS 205 x 6 Year 1988 Safan hydraulische knipschaar Sheet thickness (mm) T = 6 mm Sheet width (mm) L = 2.050 mm Depth rear gauge (mm) D = 1.000 mm Electr. backgauge 1 set extra spare blades Sheet support arms

Sheet thickness: 4,00 mm Sheet width: 1500 mm Depth rear gauge: 0 mm Make Haco 4 mm Type SST 1504 Year 2002 SP8 Robosoft Haco schaar Sheet thickness (mm)T = 4 mm Sheet width (mm) L = 1.500 mmDepth rear gauge (mm)Swing beam Back stop 750 mm

Cutting length : 4100 mm Cutting thickness : 16 mm Number of cuts per minute : 5 Power : 30 Kw Machine is in good condition

Cutting thickness, mm - up to 8; Cutting length, mm - up to 4050; Cutting angle, mm - 1.5; Number of hydraulic clamps, pcs - 17; Cuts per minute (metal / stainless steel) - 13/20

Cutting length : 3000 mm Max. cutting thickness : 13 mm Machine is in good condition

Machine is in good condition but you need to order new Control Panel! Maximum cutting length : 3100 mm Maximum cutting thickness : 20 mm

Touchscreen CNC control Cuttinglength: 3100 mm Max sheetthickness st 45: 20 mm Depht of throat: 150 mm Strokes/min: 9 > 30 str/min Adjustable cutting device: 0,05 > 1,3 Backgauge: 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 33 kW Weight: 16 ton number of sheetholders: 16x

Amada Promecam GPS 3100 x 12 mm CNC Cuttinglength: 3100 mm Max sheetthickness st 45: 12 mm Backgauge: CNC Electric motor (power): 15 kW Length: 3600 mm Depht: 1820 mm Height: 2120 mm Weight: 10 ton number of sheetholders: 16x

used scrap shears / Aligator scissors Manufacturer: Schlüter Maschinenfabrik Type: MGA 6 Year of construction: 1974 specifications: Cutting performance at 37 kg/mm²: Round iron: up to 18 mm Square liners: up to 15 mm Flat iron: up to 60 x 8 mm Sheet: up to 7 mm

sheet width: 1.050 mm plate thickness: 4 mm cutting angle: 2,5 ° table width: 510 mm table height: 820 mm back stop - adjustable: 600 mm no. of strokes: 35 Hub/min total power requirement: 3 kW weight of the machine ca.: 1.100 kg dimensions of the machine ca.: 2,06 x 1,64 x 1,21 m Basic equipment: - manual backgauge with 600 mm travel - Measuring stop 800 mm - Foot pedal with emergency stop switch - Bracket arms in front for workpieces - Cutting line lighting - Protective demarcation OPTIONS: - Pneumatic sheet metal lifting device - Optical safety bar - Miter device with adjustable - angle 0-180 ° - engine. Backgauge with NC control and 750 mm travel - engine. Backgauge with NC control and 1000 mm travel - piece counter More sizes at info @ rs-sperling .de The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke 340 mm stroke in a minute 6-10 /min lubrikant capacity 400 lt motor 30 kW

Cutting length : 6100 mm Max. cutting thickness : 16 mm All maintenance has been done recently Motorized table is included in the offer

manual backgauge with mechanical counter Cuttinglength: 2050 mm Max sheetthickness st 45: 4 mm Passage between uprights: 2250 mm Strokes/min: 25 > 55 str/min Adjustable cutting device: 0,05 > 0,4 Backgauge: 750 mm Adjustable cuttingedge: 0,5 > 2° Electric motor (power): 5,5 HP Weight: 2,8 ton

Cutting length 3,050 mm. Max. thickness 6.3 mm St 235 There is a set of spare knives for the scissors The scissors are fully operational and are in use.

LVD MVS 3100 x 8 mm Cuttinglength: 3100 mm Max sheetthickness st 45: 8 mm Depht of throat: 60 mm Strokes/min: 15 > 45 str/min Backgauge: 1000 mm Adjustable cuttingedge: 0,5° > 2° Electric motor (power): 15 HP Length: 3770 mm Depht: 1700 mm Height: 2170 mm Weight: 8 ton

: gebraucht : 1968 : 9581 : 5500 € : 1 : 1050 mm : 2 mm : 150 1/min : 500 mm : 1500 mm : 1700 mm : 1100 mm : 800 kg man. back gauge with hand wheel and scale user manual in GERMAN didn&apos,t according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1050 mm plate thickness: 3 mm distance between columns: 1100 mm back stop - adjustable: 600 mm connected load: 3 kW weight of the machine ca.: 1,1 t dimensions: 1,7 x 2,1 x 1,3 m The machine works quietly and it is energy-saving by its gear motor and brake system. Our machine is manufactured as steel construction monoblock body welded from ST42 quality material. The blades on the machine are of 2379 quality and the brand’s name is BOHLER. These high-quality blades ensure quality and precise cutting. Emergency stop button and finger guard grill are standard equipment of foot pedal machine. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

electrical network - 380 V frequency – 50 Hz main fuse – 20A main engine directly on line main engine power – 7.5 kW motor with rear pressure gauge – AC 0.37 KW control: SP8 Cutting length - 3100 mm Thickness of cut sheet metal in grade S355 - 6 mm, stainless steel sheet - 4 mm.

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

Engine. Guillotine Shears Impact Shears Tin Shears Scissors Cutting Manufacturer: KRAMER Model TM IIa 3000x4,5 max. cutting length 3050 mm max sheet thickness at ST 40 4.5 mm Distance between uprights 3050 mm Projection 130 mm Table width 360 mm Strokes per min 30 pcs. Hold-down device 16 pieces Manual backgauge travel 5 – 550 mm Engine power 7.5 kw Machine weight 4000 kg Space requirements: W 3480 mm D 3600 mm H 1400 mm Foot switch Back gauge front support arms Angle stop The machine is in good condition and ready for immediate use. Machine runs very quietly. Forklifts available, freely loaded trucks Cheap shipping possible Location of the machine 48324 Sendenhorst for enquiries 0157-35496006 The price is net plus 19% VAT.

working width: 2000 mm for sheets up to: 3 mm Clear stand width: 2050 mm Stand discharge: 250 mm Support table size: 220 x 2200 mm electr. Drive: 380 V, approx. 5 kW Weight: 2.7 t

Soenen 3100 x 4 mm Cuttinglength: 3100 mm Max sheetthickness st 45: 4 mm Weight: 5 ton

Working width: 3000 mm Sheet thickness: 4 mm Projection: 100 mm Backgauge: 500 mm Drive power: 380 V, 7.5 kW Space requirement: 3400 x 1600 x 1700 mm Weight: 4500 kg

Cutting Length 3050 Mm Max Cutting Thickness 6 Mm Rear Register Stroke 1000 Mm Angle Variation 0°30′ – 2°30′ Engine Power 7.5 Kw

Cutting width: 3900 mm Dimensions (LxWxH): 5100 x 1700 x 3100 mm Height without legs: 2410 mm

Used Colgar CM 303 CNC shears Visible in Italy Sold as it is

Machine in good technical condition, currently disconnected. Maximum cutting length: 3150 mm Maximum cutting thickness: 10 mm Minimum sheet cutting thickness: 1 mm Total power consumption: 22 kVA Machine weight: 11.5 t

Capacity 3050 x 6 mm Electrically adjustable back gauge

Hydraulic swing cut - sheet metal shears make DIGEP type DLB 16/3100Machine -No: 71, built in 1986Technical specifications:Knife length: 3100 mmCutting length: 3000 mmMax. Sheet thickness: 16 mmNumber of strokes single operation / series operation: 8/12 H / min.Power requirement: 39 kWWeight approx: 25.5 tDimensions approx: 5160 x 3000 x 2700 mmWith- 4 table extensions- motorized backgaugeused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make VOEST-ALPINE type BTHS 8 x 3150Fabr. -No: MBO-565Technical specifications:max.cutting length: 3150 mmmax.sheet thickness: 8.0 mmThroat: 300 mmInfinitely variable cutting length adjustment: 500 - 3150 mmStop adjustment range: 0 - 1000 mmWeight about 10.2 tDimensions approx: 3500 x 2300 x 1900 mmwith- motorized backgaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic sheet metal shears make SAGITA BEYELER type 3100 x 12Ser. -No: 27994 built in 1975Technical specifications:Cutting length: 3100 mmmax.sheet thickness: 12 mmDistance between the uprights: 3250 mmCutting angle: 2.0 °Number of cuts per minute: 24 - 34Dimensions approx: 3650 x 2050 x 2050 mmDrive power: 40 hpWeight approx: 13 twith- Cutting gap adjustment- Adjustment range of the stop 1100 mm- foot switchused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hydraulic guillotine shears make LUTHER type TS-S 25/4Year of construction 1973Technical specifications:Max. cutting length: 2530 mmMax. cutting thickness at 50 kg strength: 4.0 mmlateral projection: 200 mmTable height: 750 mmStrokes per minute:45Drive power: 15 kWDimensions L x W x H: 3010 x 2150 x 1800 mmWeight approx.: 6100 kgwith- Motorized backgauge- foot switch- angle stopusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Manual sheet metal shears make PEXTO type 137 / LMachine -No: 10/70Technical specifications:Cutting length: 1020 mmCutting thickness normal steel: 1.6 mmTable width: 300 mmWith- 2 extension arms 600 mm- foot disengagementused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Capacity: 6200 x 13 mm (steel) Delem DAC 350 control NC controlled back gauge NC controlled sheet thickness adjustment

Machine in good technical condition, possibility of testing after agreement. Max. length of cut sheet: 3150mm Max. thickness of cut sheet: 6.3 mm Weight: 8500kg.

Lever guillotine shears make HUNDT - KRAMER type HBS IIISerial -No: 48001 year of manufacture 1990Technical specifications:Useful length: 1020 mmMax. sheet thickness: 1.25 mmWidth stop adjustable: 0 - 550 mmExternal dimensions: 1800 x 950 x 850 mmWeight approx.: 250 kgwith- open sheet metal holding for longer cuts in the push-through procedureused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy motorized circle Scissors make PARX type KSM 6 SMachine -No: 3962 Series -No: 36/79 Year 1979Shear performance up to 40 kg strength: 15 mmShear capacity up to 105 kg strength: 9.0 mmminute Diameter of the tube: 450 mmMax. Diameter of the tube: 1600 mmDischarge between the stand and knife: 625 mmCutting speed: 10 m / min.Drive power: 11 kWWeight approx: 8,2 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Crank sheet metal scissors make LOTZE type probably KShy 25Max. Cutting length: 2500 mmMax. Sheet thickness approx: 5.0 mmlateral projection: 70 mmTable width: 500 mmDimensions L x W x H: 3100 x 1600 x 1300 mmWeight: 4000 kgWith- Table extensionthe front cover plates are missingused, despite the year of construction in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools