shape used for sale

Profile bending roll used equipment hydraulic model AR200 year 2008 make MG Italy Capacity bending chart photo in enclosed -Technical data: Output shafts size 200 mm -Machine complete with set of rollers adjustable for the various shape of profiles. -Traction tool hydraulic operated for the HEB-beam - IPE - UNP bending the hard side. -Lateral correctors left and right side hydraulic operated in 3 direction. -Included additional set of rolls for pipe 6" inches -Machine with 3 rolls driven system with individual hydraulic motor and axial gear-unit on each shaft. -The 3 shafts working on bearings, heavy duty type with sealed lubrication. -Centralized control panel movable on wheels with all electric commands. -Dual rolling speed up to 5 mtr/min with automatic balancing system between the 3 rolls. -Safety devices in compliance with European regulation. CE mark. - ...

Seehr well-preserved solid wood panels - gluing system TYPE PROFIPRESS P 3500-2 for max. wood length 3.5m Loading from the right in u-shape Year of construction 2003 General overhaul 2018 since then only test run Machine dismantled, on request with assembly against payment Seehr good condition immediately available

Automatic tufting machine. Makes pattern in shape of circles. Can tuft mattresses. Frame is moving according to program. Tufting is done with Hector sewing machine.

Ripper 1 shaft With hydraulic pusher, brand: Laiotz, model: R-820/1000, cutting chamber: 800x800 mm, motor: 100 hp, rotor: 800x600 mm, blades: 40x40. Electrical panel. At Gester we know that rip mills are indispensable machines in the plastic market, designed to reduce the size of different types of parts, by crushing them. Machine oriented to the rough crumbling of a wide range of dimensions of raw material such as films, obtaining final granulometries less than 50mm. The feeding system will be adapted to the type of plastic to be crushed (hardness, size, shape) to obtain the maximum performance of the mill.

The RHEON CUP ROUNDER SR002 cylinder rounder forms various types of dough pieces into a round shape. By combining a two-row divider and a cylinder rounder, additional possibilities for producing round products with a quality comparable to manual processing are achieved. Features and benefits of the machine: Maximum capacity of 2200 pieces per hour (2 rows of 1100 pieces per hour). Weight range 50-120g. Machine made of the highest quality food grade materials. Call us for a demonstration!

cutting diameter: 570 mm saw band length: 7250 x 41 mm cutting width: 1,3 mm capacity 90 degrees: square: 550 x 550 mm capacity 90 degrees: flat: 550 x 700 mm total power requirement: 4 kW weight of the machine ca.: 6050 kg required space: 2600 x 1300 x 3700 m The KLS 550 x 700 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor The pictures are for o ...

cutting diameter: 650 mm saw band length: 8200 x 54 mm cutting width: 1,6 mm Capacity 90° - rectangle: 650 x 850 mm Capacity 90° - square: 650 x 650 mm total power requirement: 5,5 kW / 2775 Nm weight of the machine ca.: 6400 kg dimensions of the machine ca.: 2700 x 1500 x 4100 mm The KLS 650 x 850 is a semi-automatic and column guided horizontal bandsaw. Standard specifications - Swarf Brush - Hydraulic Blade Guide - Hydraulic Vice - Hydraulic Blade Tension - Blade Breakage Switch - Stop System - Automatic Ball Screw Lubrication - Led Lighting - Swarf Conveyor - Swarf Carrying - 1400 mm Feeding Drive - Double Roller Table - Material End Detector - Program Saving System - USB Connection Output - PLC Control & Touch Screen - Inverter Optional specifications - Laser Line - Lubrication Mist - V Shape Vice - Extra Double Roller Table - Upper Clamp System - Curve Cutting Detecting Sensor  ...

Punch Rounder PR101 is a 1 row dough ball forming machine. Dividing and rounder process is automated by connecting to the Rheon Twin Divider wich accurately cuts the product to the desired weight. It molds various types of dough to a perfectly round shape such as high water absorption and long fermentation dough. It is a machine that has never been used (at most she has 30 hours on her hourmeter) Offers are heard

Saw blade grinding machine Schmidt Tempo ECE 45 - 4 Technically obsolete in 2023 CBN deep section with A-Pos and automatic chamfering Prepared for the use of grinding oil, so that a much longer service life of all aggregates is guaranteed in contrast to working with emulsion. The automatic measurement of the tooth position for regrinding and chamfering is carried out via the AUTO POS system. A short video of a calibration process can be viewed under the link. Car. Fire extinguishing system Kraft und Bauer For regrinding and production of circular saw blades with angle and arch tooth according to tooth shape A, AW, B, BW, and C according to DIN 1840 for circular saw blades from 20 mm Ø to 550 mm Ø. Cycle and grinding time display automatic central lubrication Control cabinet cooling Centering holder with centering bolt 16 mm Ø Tension nut with mec ...

Inv. Num. : 6283 Type: Producer: Generated: 2000 Parameters: The line consists of: 2x shape lines (force shaper. 2x unwinding reel and automatic scissors at the end) 1x edge banding machine (corner shelf) automatic calculator for finished corners)

Shape milling machine Brandt type FP 10 Specifications: • Year of construction: 1989 • Workpiece thickness max. (mm): 55 • Workpiece width min. (mm): 80 • Profile depth max. (mm): 80 • Inner radius min. (mm): 10 • Edge material thickness max. (mm): 3 - depending on radius and edge material • Milling motor: 0.5 kW, 27,000 rpm. • Electrical: 220 V - 1 Ph. - 50 Hz • Power supply (kW): 0.5 • Compressed air connection (bar): 6 • Dimensions L x W x H (mm): 850 x 650 x 1430 • Working table height (mm): 1000 • Swabing unit: for processing thick PVC edges • Weight (kg): approx. 120

cascade separator, vibrating chute, vibrating conveyor, vibrating chute, vibrating chute used Manufacturer: KARL MERZ AUFBEREITUNGSTECHNIK Type: ULA 570/50-650 built: 1987 Gutter approx. 500 x 1000 mm 2 vibrators each 0.84 kW Overall dimensions approx. 1300 x 1300 x 1400 mm e.g. For the separation of granules with shape defects, e.g. angel hair, double granules This cleaner was used for plastic granules. Subject to changes and errors in the technical data, specifications and prices as well as prior sale.

Profile grinding machine Loeser S0 for grinding profiles using templates. The sanding belt is guided over the wheel/template profile and thus transfers the shape to the wood, which is then passed through manually the machine is guided. · Workpiece size LxWxH max. approx.: 500 x 300 x 100 mm · Extensive accessories, motors approx.: 2 kW

Packaging machine Flowpack machine Manufacturer: Hugo Beck Type: flowpack R10 Year of construction: 2021 Rotating transverse weld Moulded shoulders that vary in width for a bag width of approx. 10 cm to 13 cm Constant height of the molded shoulders for a bag height of approx. 5-10 mm (depending on the shape of the contents) Film width: 300 mm / max. 400 mm Output: up to 18,000 cycles/h Sensor for pressure marker detection 170 mm wide welding jaws with zigzag section, without Euro hole Inlet table length approx. 1.5m Longitudinal weld seam at the bottom

verfügbar ab ca. 09-2023 - Producer Elmag Superfici - Type ETC-3/2-5500 - Year of construction 2003 - Working width 1.300 mm - Number of pallets 50 Stk. - Max. part height ~100 mm - Clearance height between the pallet 120 mm - Measure: middle pallet - middle pallet 3.800 mm - Max. part length 5.200 mm - Number of adjustable temperature zone 2 Stk. - Fresh air 9.000 m³/h - Heat output max. 2 x 45.000 kcal/53 kW - Drying temperature ~ 55 - 60 Grad - Incl. heat exchanger - Throughput in u-shape - Infeed side left - Feed speed infinitely adjustable 2 - 10 m/min - Suitably for water based lacquer - Suitably for solvent based lacquer - Length 7.400 mm - Width 6.510 mm - Height 5.745 mm - Location, not in stock ab 09-2023 - Voltage / HZ 400 / 50 - Voltage fluctuation max. +/- 5 % - Ohne Stellventile und Wasserpumpen

Te koop: The Normfinisch Turntable blasting machine is suitable for blasting often larger, round products. The products are placed on a turntable and blasted by rotating the table in combination with the oscillating nozzle movement. The turntable is moved outside the cab with a transport system, so that loading with a crane/forklift is possible. The blasting machine is like new. Very little used! Areas of application of the turntable blasting machine are: Burr Shotpeenen Roughen For a uniform blasting result, the products rotate on a turntable The basic system is a manual turntable that can be placed on wheels or not in the cabin Different systems are possible for blasting, from manual to fully automatic with several movable guns. The degree of automation depends on the type and shape of the product Still to be seen under power. The original price was 60,000 euros. Please bid

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 10 F Engine No.: in production Power: 524 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Heating oil or diesel B7 Technical data generator: Generator manufacturer: A. van Kaick Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built-in Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1 ...

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: in production Power: 576 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: synchronous with AVR Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 1.850 Hei ...

For marking on almost all metals and plastics, including most metals made of steel, stainless steel, brass, Bronze, gold, silver and similar materials as well as wood, glass, ceramics, leather, fabric and organic materials. Software: Marking software - QuickMARK ™ easy-to-use professional laser English in standard version Highlight Characters - All keyboard text characters and symbols. Programmable characters height, width, spacing, linear Position, angle and circumferential position Highlight Font - Selectable highlight fonts; Windows TTF fonts and continuous line fonts, All content in the text can be adjusted flat or curved. Content of the automatic tagging - serial numbers, shift codes, content from barcode reader, real time and date. Simultaneously import and markup content from a text or Excel file. External Content Management - Importing and tagging content from a host on the net ...

Filleting machine for salmon and trout This filleting machine processes salmon, trout from abt. 2 to 7 kg up to 20 fish/min (depending on fish size). The CT2630 in many ways is similar to the CT 2611. But the main difference from the CT2611 is the combination of band knives and circular knives. Due to this combination the machine CT2630 treats the fillets very gently. The band knives automatically adjust to the size and shape of the fish and the circular knives make sure that the cut is made as close to the backbone of the fish as possible. A clean cut with maximum yield is achieved. With this filleting machine time-consuming readjustment is avoided. By simple adjustment of valve pressure, the machine automatically cuts the required type of fillet. The open design of the filleting machine makes cleaning considerably easier. At the back of the machine you will find two access doors  ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

La San Marco NEW 105 MULTIBOILER 2G portafilter machine Original price 8.800 ,- € In the NEW 105 Multiboiler series, the latest technology from La San Marco has been applied. Multiboiler technology allows precise temperature control for each boiler of each individual group. The temperature is set in a simple and intuitive way on the keyboard of each group. The boiler for steam and hot water has an electronic automatic temperature adjustment, which can be easily adjusted using the touchscreen keyboard. The innovative keyboard with touchscreen technology is complemented by a graphic RGB display. Setup and program advice is simple and intuitive, and the display also provides a range of information that is of great benefit to the operator. The illumination of the workstation with customizable multicolor LED makes the machine even more ergonomic with an eye on aesthetics. Grou ...

Bizerba CWL Eco flex continuous scale with Sick VMS520 volumetric measuring system Bizerba CWL Eco flex Continuous Scale Dynamic weight detection with volume determination The CWL Eco flex can be integrated almost effortlessly into existing parcel shipping, sorting systems and feeding lines. Bizerba WM-CWL flex Continuous Scale Model: CWL Eco in Motion DE-09-MI006-PTB018 Max 60 kg Min 0.4 kg 230 V Sick VMS520 volume measurement system Features • Non-contact, active measuring method • Measuring the length, width and height of cuboid objects • Measure the length, width and height of objects with almost any shape • Works with a wide variety of surface structures and on different flat conveyor systems • Flexible system configurations • Calculation of the small-envelope cuboid (box volume) • Calculation of the real volume Device components Sick ...

Round Table, Round Dividing Table, Circular Dividing Table WMW Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 25 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 26 mm ( U-shape ) used, checked! Dimensions: 410 x 370 x 100 mm

Rotary table, round dividing table, circular dividing table WMW C 315 k ( C315k ) TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Slot width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 23 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 135 mm

Profile rail, perforated, 60 pieces OBO BETTERMANN 1268 L 200 FS 1104 268 Size: 200 x 35 x 18 mm Slot width: 17mm Material thickness: 1,25 mm Profile shape: C-profile Material: Steel, strip galvanized IP65 New ! dimensions ( profile rail ): 200 x 35 x 18 mm Dimensions ( packaging ): 245 x 160 x 280 mm

EAGLE eVision 1530 F3.0 AF fiber laser was manufactured in 2012 in Poland. The machine used in the cutting process of workpieces made of structural steel, stainless steel, aluminium and copper, guarantees the user excellent dimensional and shape precision during the cutting process. The low cutting edge and small heat-affected zone ensure that the geometry of the workpiece does not change during processing at the edges of the material. The EAGLE fibre laser uses the energy-efficient and trouble-free IPG YLS-3000 laser source to supply the PRECITEC cutting head with a high-quality 3 kW laser beam. The cutting head is equipped with overload and collision protection, which automatically shuts down all machine axis drives if a collision with the workpiece is detected. Thanks to the special head positioning system (HRS), a constant distance is maintained between the head and the sheet meta ...

Replacement glass, replacement tub, 3 pieces SCHUCH 161018 PK 161020 PK 161119000 for fixture 1x 18 / 20 W Shape: prismatic Material: injected, clear acrylic glass with inner prisms New ! Dimensions( single replacement glass ): 655 x 94 x 75 mm Dimensions( packaging ): 680 x 130 x 140 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: MTU Engine: 12 V 1600 G 20 F Engine No.: on request Power: 576 KW G3 Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 / Diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: HCI 544 F Gene. No.: in production Generator power: 680 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Parallel operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 990 Dimensions of the power unit: Width approx. mm: 2.060 Height approx. mm ...

Replacement glass, replacement tub, 3 pieces SCHUCH 161058 PK 161065 PK 161119002 for fixture 1x 65 / 58 W Shape: prismatic Material: sprayed, clear acrylic glass with inner prisms New ! Speditionsware, shipping costs on request !; Dimensions( single replacement glass ): 1560 x 94 x 75 mm Dimensions( packaging ): 1590 x 125 x 130 mm

Execution: Aggregate type: stationary Execution: Soundproofed Technical data engine: Engine manufacturer: Baudoin Engine: 12 M 33 G 1400 / 5 Engine No.: in production Power: 1,100 KW Cooling: Water-cooled Occasion: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 Technical data generator: Generator manufacturer: Stamford AvK Generator type: PI 734 B Gene. No.: in production Generator power: 2,000 kVA Voltage: 400 / 231 Volt Power factor: Cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Execution: Automatic start Functions: Emergency power operation Switch: Generator switch 4 poles Delivery: Built Tank: Execution: Base frame tank with drip pan Content / liter: 1000 Dimensions of the power unit: Width approx. mm: 2.460 Height appro ...

Bollard, bollard PAGUS Ø 60 x 300 mm diameter: Ø 60 mm length above ground: 300 mm Total length: 365 mm for ground socket: Ø 53 x 65 mm Material: stainless steel ( solid ) Head shape: Hemisphere used, tested ! Dimensions: 365 x 60 x 60 mm

Fully automatic stretch film packaging machine Packing Plant / Wrapper Fabbri Group ELIXA 21 / B.283.XS Elixa 21 reaches a maximum speed of 21 packs per minute, making it one of the ideal solutions for use in stores. Like all the machines in the Elixa range, the Elixa 21 is an automatic, compact and reliable stretch wrapping machine designed by the Fabbri Group specifically for particularly small workspaces and for the back rooms of retail stores. Elixa 21 can pack all foods compatible with stretch film and technology, reaching a maximum speed of 21 packs per minute. Neutral or printed films with continuous printing are used, which offer more possibilities for communication and branding on the packaging. It delivers maximum results in combination with Fabbri Group stretch films, but also offers excellent performance with food films from all major manufacturers on the marke ...

Bollard, bollard PAGUS Ø 60 x 338 mm Diameter: Ø 60 mm Length above ground: 338 mm Total length: 431 mm for ground socket: Ø 55 x 93 mm Material: stainless steel ( solid ) Head shape: Hemisphere with connection for grounding cable used, tested ! Dimensions: 431 x 60 x 60 mm

Commercial weight, casting weight, verifiable PAGUS 5.0 kg Diameter: Ø 95 mm Design: cylinder / button shape class: M3 Material: cast iron, painted used, tested ! Dimensions: 95 x 95 x 147 mm

Commercial weight, casting weight, verifiable PAGUS 10.0 kg Diameter: Ø 118 mm Design: cylinder / button shape class: M3 Material: cast iron, painted used, tested ! Dimensions: 118 x 118 x 180 mm

Conveyor belt in the form "Z" - MTF Technik 2L-HE Year of construction: Location: Lodz, Poland Conveyor belt in the shape "Z" Width of the carrying strap 31 cm Length of the inclined support strap 130 cm Length of the lower strap 80 cm Length of the upper strap 50 cm Carriers with a height of 3 cm every 60 cm Height of the conveyor belt housing: 8 cm Conveyor belt mobile on wheels All offered equipment is started by our service technicians before it is sold. It is possible to receive a video of the technical tests of the selected equipment or to participate in live technical tests at our company in Łódź. Price: On request

Rotary Table, Round Dividing Table, Circular Dividing Table WMW C 315 k ( C315k ) TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Groove width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 24 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 155 mm

tilting table, clamping table RECORD clamping area: 290 x 285 mm 90° Tiltable 360° rotatable 3 grooves groove width: 14 / 25 mm groove depth: 21 mm mounting holes in base plate: Ø 17 x 20 mm ( U-shape ) used, checked! Dimensions: 380 x 370 x 175 mm

tilting table, clamping table, sinusoidal table PAGUS clamping surface: 250 x 180 mm table height: 78 mm approx. 50° tiltable groove width: 10 / 18 mm groove depth: 17 mm Base plate: 305 x 180 mm Mounting holes in base plate: Ø 14 x 20 mm ( U-shape ) used, tested ! Dimensions: 305 x 230 x 80 mm

Round table, round dividing table, circular dividing table PAGUS Ø 250 mm Table height: 100 mm Slot width: 14 / 24 mm Groove depth: 23 mm Centering hole in table: Ø 20 mm Mounting holes in base plate: Ø 15 x 24 mm ( U-shape ) used, checked! Dimensions: 400 x 350 x 100 mm

Rotary Table, Round Dividing Table, Circular Dividing Table WMW A 315 k TGL28561/01 Table diameter: Ø 315 mm < br />table height: 135 mm groove width: 14 / 25 mm groove depth: 24 mm Mounting holes in base plate: Ø 19 x 25 mm ( U-shape ) used, checked! Dimensions: 395 x 390 x 135 mm

Rotary Table, Round Dividing Table, Circular Dividing Table WMW C 315 k TGL28561/01 Table diameter: Ø 315 mm Table height: 135 mm Slot width: 14 / 25 mm Groove depth: 24 mm Centering hole in table: Ø 24 mm Mounting holes in footplate: Ø 21 x 25 mm ( U-shape ) used, tested ! Dimensions: 560 x 395 x 155 mm

Base plate for lathe chuck ROTO RECORD DHK 315 bottle ( lathe chuck side ): Ø 265 mm bolt circle ( lathe chuck side ): Ø 290 mm, 3x bore: Ø 13.5 mm central bore: Ø 50 mm countersunk holes (machine side): Ø 19 mm, depth: 21 mm mounting holes: Ø 18 x 40 mm ( U-shape ), hole spacing: 330 mm used, tested ! Dimensions: 400 x 320 x 40 mm

Centrifugal pump, water pump CALPEDA NM4 25/160BE Qmax: 6,6 m3/h Hmax: 7.7 m Qmin: 1.0 m3/h Hmin: 3.6 m motor: 0.37 kW 1740 rpm 230 / 380 V 3AC 50 Hz IP54 input: 1 1/2 inch ( pump ), 3/4 inch ( pipe connection ) Output: 1 inch Pump base: 75 x 190 mm hole spacing (parallel to shaft): 55 mm hole spacing ( transverse to shaft ): 150 mm hole diameter: Ø 9 mm x 15 mm ( U-shape ) used, checked! Dimensions: 440 x 205 x 265 mm

Key data: 80 mm, 80 mm, 80 mm

Profile bending roll shafts output 80 mm brand Sergi Italy model PP type SER80CI year 2001 machine reversible can work with vertical shafts/horizontal shafts electric power 10Hp on the hydraulic centralized unit voltage 380 /50 -output shafts 80 mm -rollers diameter 250 mm -rollers interchangeable in 3 pieces each shaft to seat and copy the different shape of profiles -Powered driven the 3 shafts dragging with hydraulic motor and planetary gear-unit -Dual rolling speed fast/slow. -Rollers gap adjustable with front head screw modern system. -Pinching pyramid configuration each shaft individual move hydraulic. -Lateral correctors / straighteners left and right side with double contrast rollers. -Centralized control panel movable on wheels with all electric commands. -Digital position readout with position memory setting of the pinching rollers -Safety devices in com ...

Grease nipple, cone-shaped, approx. 1200 pieces PAGUS DIN 71412 cone shape, form A, straight thread: M6 x 1.0, width across flats: 7 mm thread: M8 x 1.0, width across flats: 9 mm Total length: 15 mm Material: Steel, galvanized Other quantities on request ! New ! Dimensions ( packaging ): 225 x 130 x 85 mm

ABC Mouth Pipe Wrench ALARM 1 1/2 11034 DIN 5234 67 mm Corner O-point jaw shape for round and square workpieces and sheets chrome vanadium steel New ! Dimensions: 445 x 90 x 25 mm

DMG MORI DMC 125 U2 Year: 2006 Used - Excellent DESCRIPTION: Was running when removed from building for a routine upgrade. In great shape and ready to go! The spindle was replaced in 2016. Comes with some manuals. 15,400 (cutting) hours. Chip Conveyor, Tool Changer, Filter System, Pallet Changer. To the best of our knowledge all details listed below are deemed correct. It is the buyers responsibility to confirm ALL details prior to purchase. SPECIFICATIONS: CONTROL CNC (Millplus IT) CNC (Millplus IT) DIMENSIONS 10' x 19’ 6” x 11’ 6” 10' x 19’ 6” x 11’ 6” WEIGHT 40,000 40,000 Number Of Tables / Pallets 2 Table Size 39.4" x 31.5" Weight On Table 4409 Lbs. X - Axis Travel 49.2" Y - Axis Travel 49.2" Z - Axis Travel 39.4" A - Axis Indexing - 120, + 10 DEGREE B - Axis Indexing -30 to 180 DEGREE C - Axis Indexing 360 DEGREE Rapid Trave ...

• Color filling control for detection of under-mixing, size, position, fragments and overfilling • Adjustable illumination • Max. width of blister web 320 mm • Application: For tablets/oblongs/coated tablets/hard and soft gelatin capsules • Inspection for: Color/presence/size/shape/circumference/location/broken pieces/overfill • 21 CFR Part 11 compliant. • Format versions are stored separately • Suitable for Uhlmann blister machines, as equipped with Uhlmann rail system • All system units installed in one box • Update to latest version possible by manufacturer Scanware