sed used for sale

Manufacturer: SEDIN - Russia Model: 1525 Condition: no electrics , mechanics complete, we can offer machine as it is or after general overhaul - new mechanics, new electrics or new CNC on request Localisation: our workshop, Rudniki - Poland Technical details Turning diameter : 1 600 mm Faceplate diameter: 1 400 mm Max workpiece height : 1 000 mm Max table loading : 5 000 kg Max horizontal ram travel : 630 mm Max horizontal carriage travel : 975 mm Max vertical ram travel : 700 mm Max vertical carriage travel : 1 000 mm No of feed carriages : 16 Carriages feed range : 0,07 - 12,5 mm/rev Distance between table and ram 0-1 225 mm Main motor power : 30 kW Speeds range : 4-200 rpm Dimensions : 3 190 x 3 360 x 4 100 mm Machine weight : 18 000 kg

Manufacturer: SEDIN Model: 1L532 Condition: Good, complete, no missing or broken parts Technical details Max turning diameter: 3200mm Table diameter: 2800mm Max workpiece height: 1600mm Max table load: 16T Max ram travel: 1200mm Max. horizontal travel of carriage: 1720mm Carriage inclination: 30 degrees Carriage feeds number: 16 Carriage feeds range: 0.09-16mm/rev Max distance between rams' axis: 360mm Distance between table and ram: 0-1780mm Table speeds: 1.25-63rpm Main motor power: 40kW Machine dimension: 5485 x 6040 x 4910mm Machine weight: 43000kg

Main characteristics: faceplate diameter - 2800 mm, The diameter of the installed product is 3200 mm, Workpiece weight - 16000 kg., The height of the installed product above the faceplate - 1600 mm, Machine weight - 43,000 kg.

faceplate diameter: 1100 mm swing diameter: 1250 mm turning height: 1300 mm Control: Siemens type: 805 workpiece weight: 4000 kg Tool changer: 10 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

faceplate diameter: 2800 mm swing diameter: 3200 mm turning height: 1500 mm slide adjustment: 1200 mm turning speeds: 50 U/min Control: Sienens 840 D side head - cross travel: 900 mm power capacity: 55 kW : workpiece weight: 16 t total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: m The engine was rebuilt in 2008/2009 to CNC control Siemens 840 D. The right support is operated CNC and the face plate. The left side of the support and assistance are conventional. Acu Rite Digital Display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

USED STAINLESS STEEL 1.75 M2 SEDITESA TUBULAR EXCHANGER REF.: C9226 Stainless steel heat exchanger manufactured by Seditesa General characteristics: Manufactured by SEDITESA Material Stainless steel Year built 2005 Shell Tubes Max. pressure allowed vacio / 10 bar vacio / 10 bar Max. temperature allowed -10 / +185 ºC -10 / +185 ºC Test pressure 16.2 bar 16.2 bar Volume 9.2 L 7.2 L Technical characteristics: Exchange surface 1.75 m2 Tubes passes 1 Casing passes 1 Nº tubes 24 ø tubes 16 Tubes length 1425 mm Casing diameter 130 mm

Hydraulic tire separator press type SEDA T-REC XXL. For quick separation of tire and rim. Also ideal for alloy rims.

faceplate diameter: 3200 mm swing diameter: 3200 mm turning height: 2000 mm workpiece weight: 50.000 kg cross travel of ram-slide: 1900 mm slides vertical travel: 1250 mm swival range +/-: -15/+40 Grad faceplate turning speed range: 0,66-62,1 U/min total power requirement: 70 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5100x9300x7200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary lathe SEDIN 1512 Rotary lathe Model: SEDIN 1512 Control Type: Conventional Country of origin: Russia AFTER RENOVATION AND NEW ELECTRICS – we can earn extra CE Specifications: Table diameter: 1100 mm Swing diameter: 1100 mm Swing over bed: 1000 mm Maximum workpiece height: 1200 mm Tool holder / capacity: 5 Workpiece weight: 3.2 tons Total power requirement: 30 kW Machine weight approx.: 16.5 tons Machine dimensions about L x W x H: 2.8 x 2.9 x 3.65 m Control cabinet dimensions: 830 x 640 x 2050 mm Additional information: -NEW ELECTRICS -AFTER REFURBISHMENT Information about the crossbar: Vertical travel: 500 mm Feed: 18 degrees; 0.45 - 10 mm/min Transverse travel: 600 mm Feed: 18 degrees; 0.45 - 10 mm/min Vertical head specifications: Feed: 18 degrees; 0.45 - 10 mm/min Vertical adjustment: 400 mm Horizontal adjustment: 600 mm 4x steel tool holder  ...

new rear light, incorrectly ordered, from stock

Frequency converter, inverter SIEMENS SED2-11/32B 6SE6436-2BD31-1CA0 11 kW Input voltage: 3 x 380 - 480 V Output voltage: 3 x 0 - Input V suitable LU58, S502, FI29, EL420 ! used, checked ! Dimensions: 250 x 245 x 185 mm

Packaging machine for automatic tray sealing. Manufactured by RETON SUPER SEDER model ET-55GFI. Used equipment, its condition is excellent, fully restored and with guarantee. Measures of the last of the tray to be sealed 310 mm x 330 mm, minutes for film reels of width 400mm. Overall machine dimensions 2200 mm x 1000 mm x 1600 mm high

- Standing on feet - Diameter : 2900 mm (incl. insulation) - Height : approx. 7000 mm - Content : approx. 40 m3

Silver coin Vatican 5 Euro 2005 proof Sede Vacante, silver .925 18 gr, encapsulated, KM373, certificate, case

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: SED 2-11/35B -Max. Power: 11 kW -Input: 380-480V +/-10% 3ØAC 26.0A 0-150 Hz -Output: 0-Input V 3Ø 26.0 A 0-150 Hz -Dimensions: 640/450/H350 mm -Weight: 24 kg

Manufacturer: GORBREX Model: TKV 512 New in: 2015 CNC Control: SIEMENS SINUMERIK 828 Location: our warehouse Rudniki - Poland Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time about: 2 months Technical details Number of columns: 1 Number of carriages: 1 Type of carriages: Rotary head in 5 position or ram Number of axis controlled: X/Z Turning diameter: 1 250 mm Table diameter: 1 120 mm Max. Turning Height: 1 000 mm Max.weight of workpiece: 3 200 kg Table speeds: 5-250 rpm Number of table speeds ranges stepless: 3 Vertical travel in Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal travel in Z axis: 775 mm Range of working feeds: 2-2000 mm/min Rapid fee ...

We sell 466 x Fujitsu Esprimo P7011 Tower: A0405599 Performance PC+ Tower Fujitsu Esprimo P7011 1 x FPC52071GK ESPRIMO P7011 ESTAR 1 x FPCPS028GK Power supply Gold 280W 1 x S26461-F5801-E308 Intel Core i7-10700 2 x FPCEN719GK 16GB DDR4-3200 1 x S26462-F5801-E503 DVD SuperMulti SATA slim (tray) 1 x FPCHG132GK SSD PCIe 1024GB M.2 NVMe SED (Gen4) 1 x S26462-F3500-E201 HDD SATA III 2000GB 7.2k (3.5') 1 x FPCHG262GK Mounting kit for first 3.5' 1 x S26361-F2930-E101 country package (DE) incl. power cable (Euro), safety manual (DE) 1 x S26483-K521-E120 Keyboard KB521 DE USB marble grey 1 x S26462-F1010-E103 Lic Win10 Pro 1 x S26462-F1010-E200 Load Win10 Pro(64) MAIN+Office 1mthTrial 1 x S26463-F2542-E223 USB Optical Mouse Grey 1 x S26462-F5801-E870 MAC-address on PC & delivery note 1 x MFY:SEND-HW-INFO HW Vendor sheet configurable via MFA SOC 1 x CUZ:PRO-MGT-RTE_EM Projec ...

sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.

SHARK 281 CCS (Cut Control System) manual bandsawing machine to cut from 0° up to 60° left. Other than the manual cut mode, the sawing machine can make single cuts without operator, using the head weight control- led by a hydraulic brake: after the cut the band stops. The frame at this point is manually lifted to the position needed in order to reposition the bar to cut . In the version with pneumatic vice (MA) the vice is opened/clo- sed by a manually-controlled valve (optional with pedal control). BEST PRICE IN EUROPE

Small SHIMA SEIKI knitting unit composed of: 1 SHIMA SEIKI flat bed knitting machine, type SES122FF, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122RT, GG 12 1 SHIMA SEIKI flat bed knitting machine, type SES122S, GG 7 1 SHIMA SEIKI design programming computer type DS ONE (E) Model VX2000, 1 SIMET electronic Winder with deknitting device model SED/6,6 winding heads, 6” traverse, works as a normal cone to cone winder and permits to recover the yarn from defective knitting clothes

The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used decanter centrifuges of the makes Flottweg, GEA Westfalia Separator and Alfa Laval. The decanter centrifuges are delivered by us fully reconditioned and with warranty. 2-phase decanters and 3-phase decanters (tricanters) as well as sedicanters count to our big stock of more than 100 decanter centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!

Manufacturer: GORBREX Model: TKV 532 CNC New in: 2015 Control: SIEMENS SINUMERIK 828 Machine fully modernized and modified of SEDIN 1L532 with new electrical and lubrication unit, painted, replacement of damaged mechanical parts, with possibility of upgrading. The upgrade is made of cast iron, on request we can equip the machine with the new CNC control SIEMENS SINUMERIK 840. Delivery time: max. to 3 - 4 months Technical details Number of columns: 2 Number of carriages: 1-option 2 Type of carriage: Ram Number of axis controlled: X/Z option X1/Z1,C Max. turning diameter: 3200 mm Table diameter: 2800 mm Max workpiece height: 1600 mm with possibility of upgrading up to 2200 mm Max table load: 16 000 kg Range of table speeds: 70 rpm Number of table speeds ranges: 3 Vertical travel in Z axis( ram travel): 1200 mm Horizontal travel of carriage in X axis: 1720 mm Working ...

Manufacturer: GORBREX Model: TKV 516 New in: 2015 CNC control: CNC SIEMENS SINUMERIK 828 Location: our workshop, Rudniki - Poland Machine fully modernized and modified of SEDIN 1516. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time: 3-4 months Tool Changer and Warranty Technical details Numbr of columns: 1 Number of carriages: 1 Type of carriage: Rotary head in 5 position or Ram Axis controlled: X/Z Turning diameter: 1 600 mm Faceplate diameter: 1 400 mm Max workpiece height: 1 000 mm( with possibility of extension to 1400 mm) Max table load: 5 000 kg Range of table speeds: 5-200 rpm Number of speeds range stepless: 3 Vertical travel of Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal carriage travel in X a ...

CNC Vertical lathe GORBREX Model: TKV 512 Year of manufacture: 2016 CNC CONTROL: SIEMENS SINUMERIK 828 Brand new machine, modified of SEDIN 1512 Excellent condition! Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828 Machine will be built on order Delivery Time: app. 2 months Technical details: Turning diameter: 1250 mm Faceplate diameter: 1120 mm Max workpiece height: 1000 mm Max.workpiece weight: - 3200 mm (5...80 rpm) - 1000 mm (250 rpm) Max swivel angle(upper carriage): 45 Max vertical feed(side carriage): 5 Number of ranges of table speeds: 18 Table speed: - min.: 5 rpm - max. 250 rpm Number of ranges of carriage feeds: 16 Carriage feed: - min.: 0.07 rpm -ma ...

The following completely reconditioned and ready compact system of SEPARATORS & SERVICE T.D. is for sale. This selfcleaning separator WSPX 303TGP-71 is clean mainly used water-based coolant, for the concentration of washing liquids like lye also waste water or rain water cleaning. The maximum hydraulic throughput capacity is 1500 l / h. The engine is a two-pole motor with 50 Hz 2.2 kW. The drum has a speed of 9516 RPM 69 DB (A). Control water consumption is 0.5 l / emissions per output. Sediment volume ca: 0.63 liters. Output of min 0.8 liters, max 0.9 litres. The separation is carried out in the separator drum which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (E.g. water) and a small stage (E.g., oil), as well as the light phase. The separator can be used as well as cleaning separator (Klarifikator) with o ...

Attachment: Lamella separator Condition: pre-owned m³/h up to 3000 m Usage: Separation of solids and liquids by sedimentation. Lamella separator as a preliminary stage before filter presses are often used for thickening. The filter press in relation to the filter surface can be sized smaller through a thin slurry before thickening. The plant is in good condition and available for rent and for sale. Visit us at the factory is like possible agreement.

Hiwell batter mixer II, Hiwell DJJ100-II batter mixer utilizes ingenious mixer to evenly combine water and batter. This stainless steel mixer is applicable for high viscosity batters such as Tempura batter., Advantages, 1. Our parry battering machine involves utilization of cutting-edge control system, thus realizing repeatable operation cycles of high-speed mixing, low speed mixing and alarm on application of batter. Therefore, batter is prevented from sedimentation., 2. Mixing tank in this fruit battering equipment is endowed with separation layer, which is aimed to keep batter temperature between 10-20℃ by ice or cold medium., 3. Our batter mixing equipment comes with batter output pump, which offers excellent connectivity to battering equipment to form batter feeder., 4. Thanks to reliable protection system and Siemens electronic components, thisfruit processing equipment is operat ...

Used hammer mill (impact crusher), model 97.58. Overall dimensions: Length 2960 mm Width 2090 mm Height 2065 mm Rotor diameter 0.8m Rotor width 0.6 m Number of hammers 4pcs Max feed grain size To 0.15 m of sedimentary rocks For igneous rocks of 0.20 m Weight Crusher 5.9 T Crusher Capacity 40-70 T / h Main drive 45 kW. Included support frame and spare hammers set. Max rock crushing size 0,15 m sedimenting rocks 0,20 m magma rocks

Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminium and titanium alloys The Concept Laser M2 cusing Multilaser is designed in accordance with ATEX directives and enables thus a safe processing of reactive materials. Like all machine solutions from Concept Laser, the model has a spatial separation from the process chamber and handling area for ease of use and safety. The system is robust and suitable for 3-shift operation. In addition, the laser source and filter technology are integrated into the system, resulting in a small footprint. The large filter area of 20 square meters reduces the change intervals of the filter, so that the system availability is increased. In addition, the M2 cusing Multilaser has a water-floodable filter as standard, where a safe filter change is ensu ...

Curing injector Fomaco FGM 48F SC BLP M3 Injector Tenderizer FGM48FSCBLPM3 + belt filter CBF 500, used Type: FGM 48F SC BLP M3 manufacturer: Fomaco A/S, Denmark (fomaco.com) Year of construction: 2015 Flexible injector tenderizer for meat, poultry or fish industry. Good condition, previous use in the field of fish. The M3 is a series of thoroughly tested, high-quality production machines designed for use in demanding and aggressive production environments. The "box-in-box" construction seals and protects critical electrical components and controls from the ingress of water, moisture and weathering. By using state-of-the-art pumping systems, dead zones and low-flow areas are eliminated, resulting in a constant pressure and precise flow rate. The result is an even distribution of brine - regardless of product, type, size and number of needles. With the BLP quick release system,  ...

GEA-CFS” fryer Type BRN 3000/500 all stainless steel electrically heated 84 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control teflon-infeed extra infeed conveyor 5 mm extra outfeed conveyor 5 mm oil circulation pump filter sediment removal system electrical hoists fire protection total length ± 6.650 mm total width ± 1.500 mm total height ± 3.200 mm

all stainless steel electrically heated 127 kW frying length 5.000 mm belt width 400 mm adjustable speed oil level control oil circulation pump sediment removal system electrical hoists fire protection overall dimensions (l x w x h) : ± 8.300 x 2.000x 2.700 mm outfeed conveyor teflon-infeed

1 AHIBA laboratory high temperature dyeing machine type Turbocolor, SEDO PC1000 dye cycle controller

Beer Separator GEA Westfalia GSE capacity 200 hl /h - 2017 This centrifuge has been designed for beer filtration and clarification of beverages. It was manufactured in year 2017 and it has hydraulic capacity 0-200 hl/h. The self-cleaning, disc stack type bowl makes the machine suitable for fully automatic cleaning - in - place (CIP). The bowl is driven by frequency controlled 22 kW AC electric motor which is connected to the bowl with a power belt. Opening and closing of the bowl for discharging the solids takes place hydraulically using water. The product feed and discharge are in a closed system. The product feed and discharges in the bowl are hydrohermetically sealed and do not feature mechanical seals. All product-contacting parts are made of stainless steel; the gaskets conform to the requirements of food operations. The delivery includes separator, valve panel, control panel wi ...

Capacity: 19l, operating temperature: 0-140°C, working overpressure: 6bar, controls: SEDOMAT 5500, with documentation, the machine was hardly used.

all stainless steel suitable for thermal oil heated with top hold down belt with canopy nett belt length 6.000 mm nett belt width 1.000 mm adjustable speed infeed conveyor outfeed conveyor sediment removal system filter mechanical hoists overall dimensions (l x w x h) : ± 9.250 x 2.000 x 3.450 mm ± 359 kW

1 ZELTEX laboratory high temperature dyeing machine type Colorstar CS1-F/2L, SEDO PC1000 dye cycle controller, for 6 inch bobbins

Product number: 1427B Type: BRN3000/500 Serial number: 517 Belt width: 500 mm Frying length: 3000 mm Heating: electric Power: 3 x 380V, 50Hz, 72kW Weight: 2500 kg Dimensions: 6300 x 1700 x 3100 mm Teflon infeed, hold down belt, circulation pump, oil level control, sediment removal, electric hoists, prepared for CO2 fire extinguisher Including separate infeed belt Machine delivered with CFS OT1750 oiltank and oilpump

Fryer Meyn 600-5000 TH -Thermal oil -Double stack -Sediment scraper

all stainless steel suitable for thermal oil heating 209 kW suitable for fire protection with top hold down belt isolated canopy infeed belt oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with manual hoists dimensions (l x w x h) : ± 8.900 x 2.000 x 4.000 mm

Following Separator for sale. Make: Alfa Laval, Made In Italy Type: FOPX 610 TFD 24 Serial Number: 4097640 Year: 1997 Product No.: 881244-03-03 Machine Top Part: 561012-01 Bowl: 554048-04 Machine Bottom Part: 540225-10 Max Speed Bowl: 5148 Speed Motor Shaft: 1800 El. Current Frequency: 60 Recommended Motor Power: 12KW Max. Density of Feed: 1100KG/M3 Max. Density of Sediment: 1350KG/M3 Max. density of Operating Liquid: 1000KG/M3 Process Temperature min/max: 0/100 OC

ovenn 650 inner dimensions 1x1x2m t max 650 C PLC Auto door Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare zirlguss Haubenöfen Herdwagenöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gildemei ...

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

all stainless steel electrically heated 85 kW frying length 3.000 mm belt width 500 mm mechanical lid oil level control Teflon-infeed oil circulation pump filter sediment removal system hoists fire protection total length ± 6.300 mm total width ± 1.500 mm total height ± 3.310 mm

1 THIES high temperature sample dyeing machine type Mini-Soft 140/1, capacity up to 20 Kg year 1989 SEDO PC150V = THIES T5 controller, addition vessel, circulation and injection pump, equipped with filter, winch speed is inverter controlled

suitable for thermal oil heating 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

CNC Double Column Vertical Lathe GORBREX model TKV525( built on the corp of SEDIN Lathe )Manufacturer: GORBREX – PolandModel: TKV525 Machine is new and build on Customer requestCondition : very good, under powerControl: SIEMENS or other - on Customer request Delivery time: 6 - 12 monthsMachine with warranty!Technical details :Table diameter: 2250 mmDistance between table and ram 0 - 1780 mmDistance between table and lower surface of transversal beam 400 - 2140 mmWorkpiece :Max workpiece diameter 2500 mmPictures are of one which was made for our German Customner and delivered to him last autumn.

Product number: 1915 Type: BR3000/600 Serial number: 888 Belt width: 600 mm Frying length: 3000 mm Heating: thermal oil, 90kW Power: 3 x 380V, 50Hz, 3.6kW Dimensions: 5650 x 1800 x 3450 mm Weight: 2150 kg Hold down belt, sediment removal, circulation pump, oil level control Prepared for CO2 fire extinguisher

6-piece sedimentation oscillator with watches New condition, never used

Following separator available for sale. Make: ALFA LAVAL Type: MMPX 403 SGP-11 Serial Number: 4119247 Year: 2002 Product No.: 881099-03-01 Inlet & Outlet: 561312-01 Bowl: 561123-01 Machine Bottom part: 561371-01 Max Speed (Bowl): 9365 r/min Speed Motor Shaft: 3600 r/min HZ: 60 KW: 2.5 Maximum Density of Feed: 1100 kg/cm2 Maximum Density of Sediment: 2631 kg/cm2 Maximum of operating Liquid: 1000 kg/cm2 TEMP: 0/100 Deg.C MOTOR Make: ABB Volt: 380/420/220/240D / 40/480/250/280b HZ: 50/60 AMP: 4.6/8.00 / 4.67/8.00 RPM: 2880/3470 KW: 2.2 /2.5 COS Q: 0.87 / 0.86