section bending used for sale

Rounds: 3 mm Squares: 2000 mm Flats: 2000 mm Flats on edge: 1000 mm Angles: 120 mm (1) horizontal / (2) vertical: 1   Horizontal and vertical:Horizontal Shaft Ø:               105mm Number of rolls:       3 Stroke X-Axis:         0 - 300mm Resistance moment:     1600 NmCM³ Capacity flat:         120 x 15 x 2000mm Capacity Tube:         114 x 2000Ø x mm Capacity bar:          60 x 60 x 1000mm Capacity T-Profile:    IPE 120 x 1800mm Working speed:         8 / 12 / 24 000mm/min. Length:                1500mm Width:                 1200mm Height:            ...

Peddimat machining center for section steel Manufacturer: Peddinghaus Type: LC 1250 / TDK 1000/9F Year of construction: 1993 System consisting of: Longitudinal saw, drilling rig and marking system Long-cut saw Manufacturer: Peddinghaus Type: Peddimat LC 1250 Year of construction: 1993 Control panel Saw blade: Ø 1250 mm, Z = 5 Motorized mitre adjustment Hydr. Locking mechanism for mitre swivel in the range of 45 / 45° Kneeling Inlet and straightening device Interface for automatic saw blade feed and automatic miter adjustment Drilling rig Type: Peddimat TDK 1000/9F Vertical drilling unit with 3 spindles each incl. internal coolant supply Hole diameter max: 40 mm Peddimat roller feed system incl. measuring discs on the inlet and outlet sides automatic hold-down device each on the feed and discharge side automatic "Z" tower adjustment by DS servo  ...

Rounds: 3 mm Squares: 120 mm Flats: 120 mm Flats on edge: 120 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Tauring - DS 120 MACH-ID 7641 Make: SAF Tauring Type: DS 120 Year: 1986 Horizontal and vertical:H + V Shaft Ø:               120mm Number of rolls:       3 x 315 Capacity flat:         120 x 45 x 750mm Capacity Tube:         180 x 3 x 2500Ø x mm Capacity bar:          80 x 80 x 300mm Capacity T-Profile:    120 x 120 x 13 x 2500mm Working speed:         0 - 5mm/min. Length:                1600mm Width:                 1800mm Height:               ...

Rounds: 0 mm Squares: 0 mm Flats: 0 mm Flats on edge: 0 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Horizontal bending machineSimasv - T 95 MACH-ID 7640 Make: Simasv Type: T 95 Year: 1994 Show price REQUEST QUOTATION Table Length:         1900mm Table Width:          880mm Max. pressing force:  95 Beam stroke:          330mm max. work piece height:200mm max. die height:      250mm Working speed:        1000mm/min. Return speed:         2500mm/min. Power:                7.5kW Capacity flatt:       120 x 180 x 5mm x mm Capacity bar:         120 x 120 x 5mm Length:               2000mm Width:  ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machinePBT - ARKUS 12 PC200 MACH-ID 7647 Make: PBT Type: ARKUS 12 PC200 Control: PC 200 TOUCH Year: 2000 Horizontal and vertical:Horizontal Shaft Ø:               40mm Number of rolls:       3 Stroke X-Axis:         200mm Capacity flat:         70 x 12 x R=700mm Capacity Tube:         60 x R=600Ø x mm Capacity bar:          30 x 30 x R=300mm Capacity T-Profile:    60 x 60 x 7 x R=800mm Working speed:         0-18mm/min. Length:                1125mm Width:                &nbs ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Curvatrici - CS 60  Digitral readout position upper roll Left & Right mode Horizontal & vertical positioning 3 sets off rolls included Hydraulic adjustment upper roller Horizontal and vertical:H + V Shaft Ø:               50mm Number of rolls:       3 x 165 mm Horizontal:            Horizontal Stroke X-Axis:         200mm Capacity flat:         60 x 12 x 800mm Capacity Tube:         2" x 800Ø x mm Capacity bar:          35 x 35 x 800mm Capacity T-Profile:    60 x 60 x 900mm Working speed:        & ...

Thin-cut creel Wintersteiger type DSG Eko Plus Specifications: • Cutting height (mm): 200 • Cutting width (mm): 200

Specifications: - Flat steel shears cut up to 450 x 15 mm - up to 300 x 20 mm - Profile steel shears - cuts L-steel at 90° up to 150 x 13 mm - Steel bar shears - cuts round steel up to 45 mm - Square steel up to 45 mm - Notching device up to 12 mm - no notching tool available! - Hole punch - punching force 850 KN - with stop table - Projection 510 mm - punches in steel up to 26 mm Ø in 22 mm - 50 mm Ø in 12 mm - various punches + matrices - Support table - E. Contact stop - Drive 400V / 7.5 kW - Space requirement approx. W 1050 x H 1900 x D 2300 mm - Weight approx. 2850 kg

Rolling curve 90° straight piece 830 mm Make: Transnorm Type: TS 2712 Year of construction: 2005 Project: N124592 Conveyor angle: 90° Width: 600 mm Outer width: 665 mm Inner radius: 800 mm Division of roles: straight piece 85 mm Curve 100 mm Speed.: 0.5 m/sec Optional: 3 supports Shipping weight: 120 kg on euro pallet Transport dimensions: L x W x H = 2800 x 700 x 500 mm Features: Für eine individuelle, fachmännische Beratung setzten Sie sich einfach mit uns in Verbindung. Kontaktieren Sie uns einfach telefonisch oder per Mail. Wir helfen Ihnen gerne bei der Planung und Umsetzung Ihrer Projekte. Wir freuen uns darauf von Ihnen zu hören. Mit freundlichen Grüßen Ihr Team der Dr. Sonntag GmbH & Co. KG Ihr Spezialist und Ansprechpartner für Intralogistik

Sectional housing pump, centrifugal pump, water pump HALBERG SIHI multi MSL Q: 60 m3/h H: 200 m Engine: SCHORCH KA7250M-AB014-152 55 kW 2965 rpm 380 / 660 V 3AC 50 Hz IP54 used, tested ! Dimensions: 1900 x 650 x 760 mm

1 BENNINGER sectional warping machine type BEN-ERGOTRONIC, working width 200 cm, year 1995, machine supplied with 2 trolley creels type BEN-CREEL, each 640 spindles (8 stores x 40 columns x 2 sides), vertical gauge 240 mm, horizontal gauge 240 mm

Hollow section fastener, hollow section fastening, for steel construction, 10 pieces BOXBOLT® BQ1Z12 Clamping range: 5 - 25 mm drilling diameter: Ø 20 mm screw: M12 x 1,75 Screw length: 55 mm Width across flats: 17 / 26 mm Material: Steel, galvanized New Dimensions ( single fastener ): 65 x 30 x 26 mm

Manufacturer: Igomak, Year: ca. 1970, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Stück/Durchmesser 100 ca, FREE TEXT: Heizplatte Oben/Veröängerte Tisch jede Seite 1000 mm, Year :ca. 1970

1 BENNINGER sectional warping machine type SUPERTRONIC, working width 220 cm, year 1989, machine supplied with 2 trolley creels type BEN-CREEL from the year 1999, each 640 spindles (8 stores x 40 columns x 2 sides), vertical gauge 240 mm, horizontal gauge 240 mm

Manufacturer: Igomak, Type: T 450, Year: 1976, Hydraulical/pneumatical: Hydraulisch, Press depth mm: 500, Press length mm: 1000, Press press opening max mm: 450, Number of cylinders: 3 Zylinder 180 mm Durchmesser, FREE TEXT: Heizplatte oben/ 7,5 Kw Leistung, Year :1976

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 40 to -Punching -Scissors -to cut -notch -mechanical release -Foot switch: 1 -div. Punches and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg

Pneumatic Sheet Metal Shears Gabro PGN 32 Thicknesses max Alu 4.8 mm Steel 3.2 mm Stainless steel 2.5 mm

: neu : ca. 8 Wochen ab Auftragse : Spanien : 12400 € : 254.2 € : 45 to : 175 mm : 4 : 27 x 12 mm : 15 mm : 16 1/min : 300x10 / 200x13 mm : 80x80x8 mm : 7 mm : 2,2 kW : 1360 mm : 1100 mm : 1500 mm : 800 kg 4 working stations foot pedal hydraulically driven oil filled table at punching and notching station with gauge user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 23500 € : 481.75 € : 60 to : 500 mm : 5 : 2 : 40x11 mm : 350x10 mm : 120x10 mm : 45/40 mm : 150x10 mm 5 workstations foot pedal trigger hydr. drive flat steel shears incl. Device for reducing the deformation angle iron scissors with round and square bar opening triangle claw punching and bending device for flat iron table at the flat steel and notching station user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 47600 € : 966.28 € : 60 to : 500 mm : 5 : 40x11 mm : 32 mm : 350x15 mm : 120x10 mm : 45/40 mm : 150x10 mm : 5,5 kW : 1950 mm : 2000 mm : 1900 mm : 1900 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH Semipaxy:Increased repeat accuracy instead of time consuming laying out ·including B&,R 15", CNC with touchscreenand integrated keyboard ·automatic positioning in x- and y axis ·manual feed of sheet to the stop ·simple grafic programming by touchscreen ·working area 1.000 x 400 mm ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 29300 € : 594.79 € : 85 to : 300 mm : 5 : 40/15 bzw. 24x24 mm : 450x15 / 450x18 mm : 475 mm : 130x130x13 mm : 45/40 mm : 12 mm : 200x12 mm : 9,2 kW : 2300 mm : 1200 mm : 2100 mm : 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 8 Wochen ab Auftragse : Spanien : 34200 € : 694.26 € : 85 to : 500 mm : 5 : 40/15 bzw. 24x24 mm : 450x15 / 450x18 mm : 475 mm : 130x130x13 mm : 45/40 mm : 12 mm : 200x12 mm : 9,2 kW : 2300 mm : 1200 mm : 2100 mm : 2400 kg hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V40 and V70 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting hydraulic downhold for flat- and angle station triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Spanien : 34900 € : 708.47 € : 3000 mm : 24 m/min : 0,25 mm : 2,15 mm : 250 kg The PAX series positions the material along the X-axis for sequential, multiple punching of profiles. feeding unit with material guidings for positioning material clamps Servomotor for positioning roller track table manually adjustable side guides Touchscreen control Other sizes for X-axis on request. The punching machine is not included in that price. If ordered together with a Geka Puma or Hydracrop machine, the mounting on the machine is included. If ordered for retrofit, mounting will be charged addittionally. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 2024 : 9711 : Jänner 2024, Zwischenverk : Spanien : 15000 € : 307.5 € : 1 : 50 to : 177 mm : 5 : 1 : 31 x 12 mm : 34 1/min : 350 x 15 mm : 80 x 8 mm : 35 / 30 mm : 10 mm : 100 x 10 mm : 3 kW : 1300 mm : 1100 mm : 1850 mm : 950 kg with bending station capacity 50 to 5 working stations flat steel shear with device to reduce deformation 350 x 10 mm with adjustment 2° 350 x 15 mm with adjustment 5° angle iron shear 80 x 8 mm with round- and squarebars opening 35/30 mm recangular notcher 90 x 42 x 10 mm punching station 31 x 12 mm press brake device for flat steel max. 100 x 10 mm table at flat steel station table at notching station manual backgauge with electric contact 2 dies V40 and V70 gap at punching station 177 mm vertical movement of all stations (nor radial) hydraulic drive 1 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 21200 € : 434.6 € : 80 to : 300 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2070 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm standard hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photo shows mod. hyd 80 SD) OPTION ",KIT", EURO 930,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 18600 € : 381.3 € : 55 to : 500 mm : 5 : 40/10 bzw. 20/20 mm : 20 mm : 37 1/min : 300x15 / 200x20 mm : 10x42x90 mm : 5 kW : 2100 mm : 1160 mm : 2090 mm : 1750 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, Ankörnvorrichtung oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - the software solution  ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 63700 € : 1280.37 € : 165 to : 610 mm : 5 : 40/30 bzw. 34/34 mm : 110 mm : 31 1/min : 750x20 / 400x30 mm : 205x205x18 mm : 60 mm : 16x58x110 mm : 15 kW : 2950 mm : 1600 mm : 2200 mm : 6300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH (sample photos) OPTION ",KIT", € 930,-- length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm Furt ...

: neu : ca. 10 Wochen ab Auftrags : Spanien : 31600 € : 641.48 € : 110 to : 610 mm : 5 : 420/20 bzw. 28/28 mm : 80 mm : 28 1/min : 600x15 / 400x20 mm : 152x152x13 mm : 50 mm : 13x52x90 mm : 9 kW : 2690 mm : 1400 mm : 2200 mm : 3300 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS  ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 9300 € : 192.51 € : 36 to : 170 mm : 3 : 27x10 mm : 15 mm : 24 1/min : 350x6 mm : 80x8 mm : 2,2 kW : 1100 mm : 800 mm : 1400 mm : 485 kg 3 working stations foot pedal hydraulically driven oil filled table at punching station with gauge user manual in GERMAN and ENGLISH FLAT STEEL SHEAR flat steel mm 200 x 13 with small deform. mm 350 x 6 blade lenght mm 356 round bars mm 30 square bars mm 25 working hight mm 980 &,nbs ANGLE IRON SHEAR L profiles 90° mm 80 x 80 x 8 L profiles 45° mm 50 x 50 x 6 round bars (optional) mm 35 square bars (optional) mm 30 &,nbs NOTCHING STATION (optional) sheet mm 8 L profiles mm 60 notching depths mm 53 PUNCHING STATION max. punching cap. to 36 max. sheet diam. mm 27 x 10 gap mm 170 stroke mm 28 working height mm 980 The data for this ad was created with ModulMWS - the software s ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 24400 € : 500.2 € : 80 to : 500 mm : 5 : 40/14 bzw. 24/24 mm : 70 mm : 40 1/min : 450x15 / 300x20 mm : 130x130x13 mm : 45 mm : 12x52x90 mm : 9 kW : 2310 mm : 1200 mm : 2050 mm : 2400 kg 2 foot pedals for independent work at 2 stations hydr. drive flat bar shear angle bar shear with minimum deformation by diagonal moving of the blade round and square bar shear rectangular notching unit punching unit up to diam. 40 mm fast hydraulic, centring device oilfilling table at the punching station with gauge table at the notching unit with gauge table at the flat bar shear user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - t ...

: neu : ca. 8 Wochen ab Auftragse : Spanien : 47200 € : 958.16 € : 130 to : 600 mm : 5 : 2 : 50x18 mm : 80 mm : 600x18 (max. 600x20 mit D mm : 120x120x11 (max. 150x150x mm : 45/40 mm : 130x12 mm : 250x12 mm : 15 kW hydraulic drive 2 foot pedals for independant working on punching and section station bending unit with 2 dies, V50 and V90 flat steel stationWITH DEVICE FOR REDUCING DEFORMATION angle iron station with round and square bar cutting triangular notching station with table and gauge punching station with table and gauge gauge 1000 mm with contact switch, for angle / flat steel station operating manual in German and Englisch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications: Weight approx. 3 to Drive power 8.5 kW Height approx. 2.1 m Width x depth approx. 2 x 0.8 m Perforated punch 700 kN, projection 510 mm, punches 30 mm in max. 20 mm Flat steel shears : 500 x 18 mm Notching device with rectangular tool up to 13 mm Sectional steel shears, L-steel, 90° mm

round bar steel: 36 mm square edge steel: 30 mm L-beam: 100x10 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : 2022 : 9636 : prompt, Zwischenverkauf v : Spanien : 13200 € : 1 : 55 to : 250 mm : 5 : 40/10 mm : 20 mm : 37 1/min : 300x15 mm : 120x10 mm : 40 mm : 10 mm : 5 kW : 1670 mm : 1160 mm : 2090 mm : 1390 kg DEMO MACHINE - MINT CONDITION 2 foot pedal for independent working on 2 stations flatsteel station anglesteel station round- and square steel station rectangular notching station punching station table on flat steel station table on punching station table on notching station complete with hydraulic oil user manual in GERMAN and ENGLISH OPTION: Kit € 930,00 length stop 1000 mm with contact switch, for angle, flat or bar station magnetic machine lamp 10 set round punches and dies: 8, 10, 12, 14, 16, 18, 20, 22, 24 and 26 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combined profiled steel shears and hole punch GEKA type HYD 80 / Hydracrop 80/A Masch. No. 9566 Year of manufacture approx. 2000 Punching force 80 ton. Projection 300 mm Punching up to 40 mm in 14 mm sheet metal Flat material shears 450 x 15 mm Angle steel shears 130 x 130 x 13 mm 4-point shears 45 x 45 mm Round material shears 45 mm Rectangular notchers up to 12 mm Motor power 5.5 kW Mains connection 400 Volt, 50 Hz stop with el. Lifting release 500 mm - Work table with stop for the hole device 550 x 380 mm - Working height of the hole device 1100 mm - Work table with stop for the rectangular notcher 550 x 400 mm - Working height rectangular notcher 930 mm - Approx. 21 pieces of various punching tools - Operating instructions - Original painting, not repainted Space requirement L x W x H 1800 x 1150 x 1950 mm Weight 1.7 ton. very good condition; used

: neu : ca. 10 Wochen ab Auftrags : Spanien : 21200 € : 434.6 € : 1 : 60 to : 250 mm : 5 : 40 x 11 mm : 32 1/min : 350 x 15 mm : 120 x 10 mm : 45 / 40 mm : 10 mm : max. 150x10 mm : 5.5 kW : 1850 mm : 1300 mm : 2100 mm : 1390 kg with bending station 5 working stations flat steel shear with device to reduce deformation angle iron shear with round- and squarebars opening triangle notcher punching station press brake device for flat steel table at flat steel station table at notching station length stop 1000 mm with contact switch, for angle, flat or bar station hydraulic drive 2 foot release user manual in GERMAN and ENGLISH WE HAVE MORE THAN 700 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rounds: 3 mm Squares: 390 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 2   Profile bending machineMG - AR 140  Roll diameter 390 mm 2 sets off rolls included Hydraulic side support Left Right Manuel or NC-Cycle controlled Horizontal and vertical:Yes, Horizontal + Vertical Shaft Ø:               140mm Number of rolls:       3 Stroke X-Axis:         400mm Resistance moment:     130CM³ Capacity flat:         220 x 50 x R=2000mm Capacity Tube:         180 x 4 x R=4000Ø x mm Capacity bar:          80 x 80 x R=1000mm Capacity HEA-Profile:  180 x R=1800mm Working speed:         0 - 5000mm/min. Adjustment siderolls:  Hydrauli ...

Rounds: 3 mm Squares: 185 mm Flats: 150 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineROUNDO - R-7-S  Digital readout position rolls Hydraulic side supports 2 x  Number of rolls:  3 Stroke X-Axis:    500mm Resistance moment:185CM³ Capacity flat:    150 x 45mm Capacity Tube:    160 x 10Ø x mm Capacity bar:     100 x 100mm Capacity T-Profile:160 x 20mm Working speed:    0 - 5mm/min. Length:           2800mm Width:            2300mm Height:           1845mm Weight:           14500kg

Rounds: 1 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Horizontal bending machineZOP BEND - P 30 Adjustable stroke with digital read out positioning display Variabel instelbare druk Snel wissel gereedschap systeem Table Length:         1250mm Table Width:          660mm Max. pressing force:  30 Ton Beam stroke:          235mm max. work piece height:250mm Stroke adjustable:    0 - 235mm Working speed:        10000mm/min. Return speed:         20000mm/min. Power:                3kW Capacity flatt:       200 x 24mm x mm Capacity Tube:        60 x 4Ø x mm Capacity bar:         40 ...

Rounds: 1 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machinePBT Indumasch - 25 BC100 MACH-ID 7772 Make: PBT Indumasch Type: 25 BC100 Control: BC 100 PBT Year: 1997 Radius measuring Variomatic rotation speed Set Universal rolls hardned Power on hours 6500 H Length:1600mm Width:1200mm Height:1300mm Weight:1200kg

Bending semi-automatic, tube bending machine, mandrel bending machine MOBITEC type BAH 1-2 KOTTMANN und BERGER GmbH Fabr. No. 056 Year of manufacture 09/2004 - for simultaneous bending of two steel pipe sections up to 12 mm bending angle max. 90 Tube diameter max 12mm Mandrel length approx. 65 mm Nominal power 3.5 kW Compressed air max. 6 bar / approx. 1 litre per bending cycle Mains connection 400 volts, 50 Hz - Pneumatic clamping - Pneumatic mandrel retraction - Control for angle input via STOBER Controlbox Series 4000/5000 - Control SIEMENS S7-200 with display TD200 - Machine without bending tools and without tool bearing bolt 25 x 183 mm - only 1 bending mandrel available (see pictures). Space requirements L x W x H 1000 x 1000 x 1500 mm Weight 390 kg good condition; used

Sheet thickness: up to 4.5 mm Roller diameter: 120 mm Foot pedal for Vor. and return CE mark Operating instructions Special equipment: Hardened and ground rollers Base frame with machine feet

Hand - Swivel bending machine KRAMER type AMS 650 x 1.5 Hand swivel bending machine, bending bench Year of construction approx. 1985 Working length 650 mm Sheet thickness at 40 kg/mm2 1.5 mm Upper cheek opening approx. 60 mm Bending cheek adjustment approx. 0-25 mm Bending angle 0-180- Upper cheek adjustment via hand crank - Pre-screw rail for the bending clamp - one-piece sharpening rail 135 Space requirement L x W x H 1200 x 600 x 1100 mm Weight 160 kg good condition; used

Swivel bending machine, cant bench, gutters, roof gutters, beading machine, beading machine, three-roller round, three-roller sheet metal bending machine, bending machine, sheet metal round bending machine, 3-roller round bending machine, profile bending machine, three-roller sheet metal rolling machine -Swivel bending machine: with 3-roller bending machine on a solid base -Max. Working width: 1020 mm -Max. Sheet thickness: 1.5 mm -Roller diameter: 2x 50 mm / 1x 53 mm -Dimensions: 1450/800/H1155 mm -Weight: 346 kg

Bending tool, die, upper knife, upper tool, straight tool, upper beam -Bending tool: for folding machine -Tool angle: 45° -Dimensions: see the drawing in the photos -Dimension: 47 x 11mm -Length: 945mm -Weight: 3.5 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/6/H45 mm -Total weight: 5,6 kg

Bending tool, matrix, upper knife, upper tool, upper beam -Bending tool: from Lotze HDZ swivel bending machine -Length 2678 mm -Hole spacing: 100 mm M10 -Dimensions: see the drawing in the photos -Dimension: 2678/15/H57 mm -Total weight: 15.7 kg