We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
124,318 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Akyapak APK 81 Profile Bending Machine All maintenance has been done recently Machine is in good working condition
used
Machine in good technical condition, after agreement possibility of testing. Weight 1530 kg.
used
New OSTAS profile roller Type OPK-45 Shaft diameter 50mm Hydraulic top roller adjustment Digital readout Can be used horizontally and vertically
used
The machine is in good technical condition, it is possible to test it by agreement. Parameters: Maximum pipe diameter: 40 mm Maximum pipe wall thickness: 2 mm Total power: 4.6 kW Machine height: 1120 mm Machine length: 4450 mm Machine width: 800 mm Machine weight: 1100 kg
used
Pipe cutting machine Length 2950mm. Width 1670mm. Height 2350mm. Control voltage 24VDC 230VAC. Rated current 32A. Total power 18kW. Weight 3000kg. Noise level 75dB.
used
The hydraulic profile bender PBH 80 is in good technical condition, including a wide range of accessories. Can be seen by appointment.
used
Hydraulic bending machine manufactured by SANDTTechnical specifications:Table size 1200 x 600 mmWidth tool 70 mmPressure at 150 bar approx. 20 t (calculated)External dimensions L x W x H 1200 x 700 x 1300 mmWeight about 1200 kgHydraulic oil content 60 lused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Machine weight: 20500 kg Max. bend length: 5000 (custom extended machine) mm Max. collet diameter: : 102 mm Max. bending capacity:: D 102, Rmax = 400 mm Min. bending inner radius:: 65 mm
used
Mandrel Tube Bender LANG type UGM 108Year of construction 1966Max. Tube bending capacity: 108 mmMax. Bending radius at 108 mm pipe with 3.9 mm wall thickness: 600 mmMandrel length: 2500 mmOutside dimensions approx: 3500 x 2200 x 1500 mmWeight approx: 1550 kgWith- hydr. Dorn return- Holder for wrinkle straightenerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Mandrel Tube Bender Fabr. LANG Type EL 65Machine -No: 2156 Year 1967for pipe diameter: 60 x 2 mmMax. Bending radius: 300 mmMax. Bending angle with existing normal tool: 180 °Mandrel holder length: 3000 mmBending speed for 90 ° approx: 3 selec. Connection: 380 V, 2.2 kWWeight approx: 1000 kgSpace required with / without mandrel holder W x L x H: 1600 x 1200/3900 x 1170 mmWith- mandrel bending length 2000 mmused, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Tube bending machine make MEWAG type RB 35 AFabr. -No: 2309 Year Oct. 1977Bending line max .: 35 x 2 mmBending radius max.:180 mmBending radius min.:25 mmSpeed of the bending plate: 78.1 / 5.6 rpm.Drive power: 1.5 hpDimensions L x W x H: 720 x 485 x 1160 mmWeight approx .:270 kgwithout spine device!used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
Type: PWZ 205/4 Number of rolls: 3 rolls Roll capacity cold: 2050 x 4 mm
used
Pipe bending machine make ROUNDO type PM 1Year of construction 1985Working / roller length: 500 mmMax. Sheet thickness: 5.0 mmminute Pipe diameter: 120 mmMax. Pipe diameter: 500 mmupper shaft diameter: 70 mmlower roll diameter: 88 mmDrive power: 1.9 kWTotal connected load: 5.9 kWBending speed: 2.7 / 5.5 m / min.Weight approx: 1250 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hand hydraulic pipe bender make MINGORI type model 53Bending sizes: 3/8 - 2 With- fold-up upper rail- 9 bending diesused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Salvagnini P4-2525 Automatic Panel Bending Machine Machine is in very good condition Bending height max: 254 mm Bending width max: 2540 mm
used
Manual Pipe Bender Fabr. PERTHEL, Gerafor pipe diameter: 18/20/22/28 mmOutside dimensions (without lever): 550 x 470 x 700 mmLever length: 1050 mmWeight approx: 100 kgWith- Bending tools:xa0xa0 Diameter 18 mm R 60, R 100, R 140, R 180xa0xa0 Diameter 20 mm R 75, R 115, R 155, R 195xa0xa0 Diameter 22 mm R 90, R 130, R 170, R 210xa0xa0 Diameter 28 mm R 120 mm- two adjustable counterpartsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Manufacturer: Festo Machine Type: RSTC-U W40/7/500GL Overall size: 1600 x 900 x 1800 mm Plate width: 500 mm Number of castors: 6 Voltage: 380 V
used
Used machine in good condition. Available for immediate delivery. - Pressure force: 80 t - Bending length: 2.000 mm - Axes: 4 - Control: Cadman Express - Weight: 5.700 kg - Dimensions (long x wide x high): 1.000 x 1.800 x 2.200 mm
used
Manufacturer LOIRE SAFE Model ESSC 300/ 30-20 / 20-15 Year 2003 Press Maximum adjustable force 300 a 3.000 kN Return force 600 kN Max opening between fixed table and chuck 2.000 mm. Mobile chuck travel 1.500 mm. Dimensions of the lower mobile table Fontal 3.000 mm. Lateral 2.000 mm. Dimensions of the mobile chuck Frontal 3.000 mm. Lateral 2.000 mm. Machine weight without tools or accessories 63.000 kg. Speeds Approaching speed, without pressure 60 mm/s Working speed, adjustable by potentiometer 1 a 7 mm/s Demoulding speed, adjustable by potentiometer 1 a 35 mm/s Return speed 60 mm/s Tooling Dimensions Frontal 3.000 mm. Lateral 2.000 mm. Height 1.500 mm. Max weight Mobile part 18.000 kg Total 42.000 kg Accessories Upper plate with tilt system INCLUDED Movable lower table with tilt system INCLUDED Stop time and safety distance Stop time 123 ms Safety ...
used
Wire bender OMAS CEB 110 BV in excellent condition
used
- 2 robots, loader and folder - PROMECAM tooling - Software BENDING SYSTEM 32 - Pressure force: 100 t - Bending length: 3.000 mm - Axes: 8 - Power: installed max: 7,5 + 21 (Robot) kW - Dimensions (long x wide x high): 11.500 x 4.650 x 3.200 mm - Weight: 6.500 kg
new
: neu : ca. 10 Wochen ab Auftrags : Türkei : 16500 € : 308.55 € : 80 mm : 260 mm : 3 : 7.5 kW : 6 m/min : 80x15 mm / 800 mm, 40x10 : 125x25 mm / 600 mm, 60x8 : 45x45 mm / 500 mm, 15x15 : Ø 50 mm / 600 mm, Ø 15 mm : Ø 100x2,5 mm / 1.200 mm, : 80x25x3 mm / 800 mm, 25x1 : 70x70x3 mm / 1.400 mm, 40 : 80x80x8 mm / 800 mm, 40x4 : 80x80x8 mm / 1.000 mm, 40 : UPN 120 / 800 mm : UPN 120 / 800 mm : IPN 120 / 800 mm : 1150 mm : 1200 mm : 1300 mm : 1600 kg 3 motor driven rolls strong welded steel construction upper roll hydr. adjustable seperate control panel with digital readout horizontal and vertical operation for- and backward drive machine and equipment according to the CE regulations WE HAVE MORE THAN 260 REFERENCES! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
The machine is fully functional, with a rich set of tools. Pipe bending tools: fi 83 - R300 fi 88.9 - R300 fi 101.6 - R250, R400 fi108 - R450 fi 114.3 - R550 fi 133 - R400 fi 137 - R500 fi 168 - R700 fi 193 - R600 fi 219 - R640, R800
new
sheet width: 3000 mm plate thickness: 12 mm pre-bending: 10 mn number of rolls: 4 Walzen diameter of upper rolls: 320 mm roll diam. bottom roll: 250 mm speed: 1,5 - 5 m/min total power requirement: 20,0 kW weight of the machine ca.: 13,05 t dimensions of the machine ca.: 5,9 x 2,05 x 1,85 m Basic equipment: - Conical bending device - Swiveling top roller - Electrically adjustable rear roller - Conical bending device - driven top roller - Pre-bending device - brake motor - Safety device emergency leash - CE certified - documentation Options: Digital display for rear roller Hardened rollers 2 driven roller Rolling extension The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Specifications: - Bending performance - Pipe at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 4.5 m. with hydr. Retreat - Bending tools 16 , 25 , 20 , 33.7, 38 mm - Bending blade 3000 mm
used
This HACO PPV 30220 Bending machine was manufactured in the year 2007 in Belgium. It is equipped with a HACO ATL 550 control unit. The machine has a pressing force of 2200 kN and a bending length of 3000 mm.
used
used
1 Wire bending machine OMCG date 1997 technical status good , soft ware to be refurbished 2.Tube bending machine OMCG date 1998 technical status good, software to be refurbished
new
sheet width: 1550 mm plate thickness: 4,5 mm pre-bending: 4,0 mm roll length: 1550 mm min. dia.: 190 mm roll diam. toproll: 130 mm engine output: 2,2 kW bending speed: 5,3 m/min weight: 1360 kg range L-W-H: 2.320 x 900 x 1.200 mm Furnishing: - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment - Digital display The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
This Trumpf TrumaBend V85S Bending machine was manufactured in the year 2003 in Austria. It is equipped with a Trumpf control unit and has 4 axis. The machine has a pressing force of 850 kN and a bending length of 2550 mm.
used
This RAS FLEXIbend 73.40 Bending machine was manufactured in the year 2005 in Germany. It is equipped with a SYSTEM 6000 TOUCH control unit. The machine has a bending length of 4060 mm.
used
This Amada HG-1703 Bending machine was manufactured in the year 2022 in France and has 6700 production hours. It is equipped with an AMADA AMNC3i control unit and has 10 axis. The machine has a pressing force of 1700 kN and bending length of 3110 mm.
used
This Schröder Fasti 145-18/075 Bending machine was manufactured in the year 2008 in Germany.
used
This GASPARINI XP 150/3000 Bending machine was manufactured in the 2008 in Italy. It is equipped with a DELEM DA-69W control unit. It is included with tools. The machine has a problem to starting up. There is an issue with the software, and the control screen is black.
used
This Bystronic Xpert 250/4100 Press Brake Machine was built in the year 2016 in Germany and has 17550 hours. The machine has a pressing force of 2500 kN.
used
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage units Workspace: Wire thickness: up to 6.0 mm Belt width: up to 80 mm Feed length: up to 520 mm Power: 10 - 250 rpm
used
Hand-hydraulic tube bending machine with hinged bending frame for pipe Ø: 3/8 - 3"
used
This AMADA HFB 125 Bending machine was made in 1999 in France. It is equipped with an Amada Operatour control unit and has 8 axis. The machine has a bending length of 3000 mm.
used
This KOMAGE S 50 4E CNC Hydraulic Press was manufactured in the year 2017 in Germany by the Komage Gellner Maschinenfabrik KG. It has a pressing force of 500 kN. The machine is in a very condition as serviced on an annual basis directly by Komage. In total the press has worked for 23,379 production hours and 2,113,050 strokes.
used
This RAS 62.30 TURBObend Plus bending machine was made in the year 2004. It is equipped with a Ras CNC 6000 control unit. The machine has a sheet length of 2540 mm and a max. sheet thickness of 2 mm.
used
Equipment: 1 sledge feeder on the right 3 press modules á 180 kN = 540 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 10 mm Belt width: up to 100 mm Feed length: up to 250 mm Power: up to 132 rpm
used
This Blecken PPE SE-3160 Bending machine was manufactured in the year 2007 in Spain. It is equipped with a Delem ER-70 control unit and has 4 axis. The machine has a pressing force of 1600 kN and a bending length of 3100 mm.
used
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 70 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 3.5 mm Bandwidth: up to 32 mm Feed length: up to 170 mm Power: up to 250 rpm
used
CRIPPA CNC YEAR 2007 LOW WORKING HOURS INCLUDED TOOLINGS AND EQUIPMENT WE ORGANIZE FOR CLIENT AS WELL TRANSPORT
used
This Tauring Alfa 200 Tube Bending machine was manufactured in the year 2007 in Italy.
used
This TRUMPF TRUMABEND V85S Bending machine was manufactured in 1995 in Germany and has 51193 hours. It is equipped with a Trumpf TrumaBend control unit. The machine does not start, and probably the control system is broken.
used
This ERMAKSAN AP 2100-35 Bending machine was manufactured in the year 2005 in Turkey. The machine has a pressing force of 350 kN.
used
Equipment: 1 sledge feeder on the right 1 two-point eccentric press 250 kN 4 normal carriage units 1 narrow carriage unit Workspace: Wire thickness range: up to 5.0 mm Belt width: up to 40 mm Feed length: up to 320 mm Power: up to 132 rpm
used
This ERMAK CNCHAP 3600x200 Bending machine was manufactured in the year 2005 in Turkiye. It is equipped with a CYBELEC DNC 60 control unit. The machine has a pressing force of 2000 kN and a bending length of 3600 mm.
used
This Ermaksan AP 3100-120 Bending machine was made in 2002 in Turkey. The machine has a pressing force of 1200 kN.