We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
125,372 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
A very well preserved VML 18 R screw compressor unit is offered. The screw compressor has the following performance data: Air volume 15.82 m³/min P2e 1.8 bar. The electric motor has a power consumption of 55 kW. If you have any questions, please do not hesitate to contact us.
used
A very well preserved VM 8 R screw compressor unit is offered. The electric motor has a power consumption of 30 kW. If you have any questions, please do not hesitate to contact us.
used
A new replacement level type VMX 110 RD is offered see pictures. If you have any questions, please do not hesitate to contact us.
used
Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used
used
Angle screw-in fitting, elbow screw-in socket, cutting ring fitting, 10 pieces PARKER WE12LR1/2MS Operating pressure: max. 200 bar material : Brass Tube outer diameter: Ø 12 mm male thread: R1/2 ( inch ) width across flats: 19 / 22 mm with nut and cutting ring New ! Also available in other quantities ! Dimensions ( single screw connection ): 50 x 47 x 22 mm Dimensions ( packaging ): 125 x 125 x 65 mm
used
Screw-on screw connection, with sealing ring, 8 pieces PAGUS G 1/2-17,6x13 mm Material: Aluminium Hose diameter ( inside ): Ø 13 mm Thread ( inside ): 1/2 ( inch ) width across flats: 24 / 27 mm Sealing ring: Ø 21 / 28 mm, material thickness: 2.0 mm similar LANDEFELD ACK 1213 A Other quantities on request ! New ! Dimensions ( single screw connection ): 42 x 30 x 27 mm Dimensions ( packaging ): 150 x 70 x 40 mm
A complete unit is offered.
used
Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Boge, screw block compressor stage from compressor type SL 270 -Screw block: type BS 430 -Final pressure: max. 15.0 bar -Hole circle: Ø 295 mm / M20 / Ø 740x22 mm -Shaft: Ø 100 x 200 mm -Dimensions: 1200/850/H790 mm -Weight: 917 kg
used
Screw compressor, air compressor, compressed air unit, stationary air compressor -Manufacturer: Mannesmann Demag, screw block from compressor type SP-041 -Screw block: Type EK 103NK -Intake unit: Demag type 10483974 with filter -Dimensions: 580/510/H480 mm -Weight: 65 kg
used
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2880/265/H265 mm -Weight: 146 kg
used
Screw conveyor, screw conveyor, screw conveyor, conveyor technology, trough screw conveyor -Screw conveyor: is unused and has no trough (see photos) -Execution: stable -Screw length: 1965 mm -Screw diameter: 265 mm -Screw pitch: 130/230 mm -Tube diameter: 140 mm -Body: steel -Screw blades: stainless steel VA -Drawing with the photos -Transport dimensions: 2950/265/H265 mm -Weight: 146 kg
used
Screws, hexagonal screws, flange nuts, hex nuts, collar nuts, solar fasteners, socket head screws -Hexagon head screws/cylinder screws: M 10 stainless steel 330 kg -Hexagon head screws: DIN 933 M10 x 100 300 pieces / M10 x 20 4400 pieces. -Cylinder screws: DIN 912 M8 x 35 6600 pieces / M8 x 30 4200 pieces -Material: A2 stainless steel -Price: complete -Transport dimensions: 1200/800/H200 mm -Total weight: 330 kg
new
Screw Jack with Translating screw BD-125-L-U-3-440-B-SHM ize 125 Worm set Ratio, Lifting screw thread - Low ratio with Single start Lifting screw Direction – Upright Spindle end - Clevis End Stroke length (mm) – 440 Locked against rotation - Stop Nut SM with protection tube Max capacity kN – 500 (50 tons)
used
CFS screw loader with meat analyser, type: Screw loader I 400, machine number: 5000066648, year of construction: 2009, 3 x 460 V, 60 Hz, 12.5 kW, screw diameter: 400 mm, Multitrack TS in-line analyser, machine number: 500006646, year of construction: 2009, total dimensions: 3100 mm x 1800 mm x 2300 mm.
used
Laska mobile elevating screw, type: Bunker screw conveyor BS 840, machine number: 13458, year of construction: 2010, 400 V, 3 Ph, 50 Hz, 11 A, 5 kW, diameter screw: 180 mm, elevating height: 1800 mm, total dimensions: 5000 mm x 1600 mm x 2350 mm.
used
Description: No. 746082 Running performance approx. 25,000 b/h with suction regulator, belt pulley, solenoid valve and thermal sensor Screw element comes from BOGE S 75 and fits other BOGE models Approx. Onsite Dimension. (l x w x h): 600 x 400 x 600 mm, weight approx.: 120 kg
used
AVITA EXTRUDER It is a single layer extruder with a single screw. Its production capacity is around 50/60 kg per hour. This machine is designed to make small and medium widths (with printing if necessary) in shrink or bundling. Year 2018 (commissioning 2020) very little served HD and comics production Maximum width 900 mm Double winder for film Micro perforation 2-color printing unit â 600 mm cylinder + sleeve cylinder 3 dies: 70 â 80 â 130 3 air rings 4-component Plastâcontrol mixer
used
75 kW, max. 7.5 bar, 13.8 m3/min.
used
45 - 160 kW.
used
160 kW, max. 7 bar, 28 m3/min.
used
We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here
used
200 kW, max. 10 bar, 32.7 m3/min.
used
132 kW, max. 7.5 bar, 22.74 m3/min.
used
160 kW, max. 10 bar, 18.78 m3/min.
used
We can offer you all types of screw making machinery for M3 - M25
used
110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.
used
50.0 kW, max. 13 bar, 7.9 m3/min.
used
50,0 kW, max. 13 bar, 7,9 m3/min.
used
75.0 kW, max. 10 bar, 10.40 m3/min.
used
30.0 kW, max. 7.5 bar, 4.86 m3/min.
used
110.0 kW, 7.50 bar, 21.90 m3/min
used
75.0 kW, 7.5 bar, 11.30 m3/min
used
250 kW, max. 8 bar, 35 m3/min.
used
Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810
used
Tire houses screw 90 mm - 25 l/d many more screws available from stock, some as good as new
used
screw for PE and PP much more screws (some are new) available
250 kW, max. 7.5 bar, 34.3 m3 rpm, oil-free, air-cooled.
used
132 kW, max. 7,5 bar, 24,2 m3/min, New srew.
used
110 kW, max. 8 bar, 15.5 m3/min.
used
160 kW, max. 7.5 bar, 27.4 m3 rpm, built 1998.
used
M18L - 1 Screw Head Slitting Machine (used) without vibrating conveyor Make: MENN - Type: KS8 and KS5 Diameter range 1.7-10 mm Shank length under head 3-105 mm Power Piece/Min 27-1.850 Weight 800 kg Engine power 1.5 kW
used
160 kW, max. 7,5 bar, 27,4 m3/min, year 1998.
used
Excenter screw pump Fabr. Cheeks, Type 60.4 R-ST
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
used
75 kW, max. 10.0 bar, 10.35 m3/min.
used
Reifenhäuser Schnecke D = 120 mm - 30 l/d, used for extruder type RH or RT 1651-1-120-30 also available: Set 120 mm - 25 L/D consisting of cylinder and new screw available for Reifenhäuser Extruder Model RT/RH 1651-1-120-25
used
Reifenhäuser screw with 120 mm diameter, 30 L/D for extruder model RT and / or RH 1651-1-120-30
used
55,0 kW, max. 10 bar, 7,4 m3/min, YOM 1991
used
Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.
used
in execution with PowerShift Transmission. Tip height 330 mm Top width 1500 mm maximum swing over bed 690 mm Spindle bore 82 mm