screw feeder used for sale

screw caper heads ZALKIN aluminium 28 mm from filler SIMONAZZI

Segment belt screw mixer with discharge screw, make baurmeister type:BE 2000, BJ. 1990, Wekstoff stainless steel, capacity 2000 liters, drive power 5.5 kW.

500 kW, max. 7.5 bar, 83.1 m3 rpm, oil-free, very good condition, with suitable atlas Copco MD 1800 dryer.

200,0 kW, max. 10,00 bar, 30,00 m3/min. Oil-free, water cooled. Excellent condition.

90 kW, max. 8 bar, 16,10 m3/min. Total hours: 13719 Loaded hours: 7703 Condition as new.

315.0 kW, max. 8.0 bar, 46.44 m3/min.

315,0 kW, max. 8,0 bar, 46,44 m3/min.

160.0 kW, max. 7.5 bar, 28.26 m3/min.

55.0 kW, max. 7.5 bar, 7.60 m3/min.

160,0 kW, max. 7,5 bar, 28,26 m3/min.

55,0 kW, max. 7,5 bar, 7,60 m3/min.

200.0 kW, max. 7.5 bar, 36.18 m3/min. condition as new. 2 stubble available.

200,0 kW, max. 7,5 bar, 36,18 m3/min. Condition like new. 2 pieces available.

75,0 kW, max. 10,0 bar, 10,40 m3/min.

; ready for operation

75.0 kW, max. 9.8 bar, 11.05 m3/min.

75,0 kW, max. 9,8 bar, 11,05 m3/min.

90.0 kW, max. 8.0 bar, 15.12 m3/min. With built-in compressed air dryer Kaeltemittel R 404a. Oil, oil filter, air filter and oelab scheider are new.

90,0 kW, max. 8,0 bar, 15,12 m3/min. With built-in compressed-air dryer refrigerant R 404a. Oil, oil filter, air filter and oil separator are new.

315.0 kW, max. 10.0 bar, 45.70 m3/min.

315,0 kW, max. 10,0 bar, 45,70 m3/min.

30,0 kW, max. 7,5 bar, 4,86 m3/min.

75.0 kW, max. 7.5 bar, 12.60 m3/min.

55 kW, 8 bar, 9.10 m3 rpm with dryer

55 kW, 8 bar, 9,10 m3/min, with built in dryer

Air Screw Compressor Atlas Copco GR 200 200 kW, 20 bar, 21.66 m3/min. New Elektronikon control at 20000 total hours. Actual operating hours 21409

Rotary screw air compressor Atlas Copco 200 kW, max. 20 bar, 21,66 m3/min. New elektronikon controller at 20000 total hours. Real working hours 21409

200.0 kW, max. 7.50 bar, 35.71 m3 rpm, built 1991, New screw in 1997 at 53000 operating hours. Engine: 380V/50Hz, 460V/60Hz

200,0 kW, max. 7,50 bar, 35,71 m3/min, Year 1991,new air end in 1997 with 53000 hours. Motor: 380V/50Hz, 460V/60Hz

110,0 kW, max. 20,0 bar, 12,60 m3/min, with built in dryer, only 80 working hours. Condition as new.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

75 kW, max. 7.5 bar, 12.2 m3 rpm, motor 380-420V/50Hz, 440-460V/60Hz

75 kW, max. 7,5 bar, 12,2 m3/min, Motor 380-420V/50Hz, 440-460V/60Hz

200.0 kW, max. 9.0 bar, 32.60 m3/min. motor: 400V/50Hz, 460V/60Hz.

110.0 kW, max. 20.0 bar, 12.60 m3 rpm, with built-in dryer. only 80 operating hours. State as new.

110.0 kW, max. 8.5 bar, 18.72 m3/min.

Cat. No. 07-1268 in very good condition Type SEP 100.1 Design: H1 PO1 Dimensions: Length: 143 cm Width: 56 cm Height: 143 cm Capacity: 60 litres/min., 3600 l/h Pressure: 6 bar Engine power: 4 kW DN 65 For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our complete catalogue. Sightseeing is also possible in the evening and on weekends by appointment. All prices are ex works plus law VAT Intermediate sale reserved! Freight cost share: by scope of delivery

110,0 kW, max. 8,5 bar, 18,72 m3/min.

75 kW, max. 10,0 bar, 10,35 m3/min.

250 kW, max. 10.0 bar, 35.88 m3/min.

250 kW, max. 10,0 bar, 35,88 m3/min.

200.0 kW, max. 10.00 bar, 30.00 m3/min. oil-free, water-cooled, excellent condition.

160.0 kW, max. 7.50 bar, 27.40 m3 rpm, oil-free, air-cooled

160,0 kW, max. 7,50 bar, 27,40 m3/min, oil-free, air cooled.

Compressed air screw compressor, 75.00 kW, 3x GA 808 and 1x GA 810

Rotary Screw air compressor, 75.00 kW, 3 x GA 808 and 1 x GA 810