screen pellet used for sale

Cutting mill Make retsch Type SM 2000 Power 695 rpm at 50 HZ 1500 Watts Rated Power Screen size 4x4 mm 6-disc rotor with 18 interchangeable inserts made of carbide can be used universally 5 litres collection container Cascade funnels Width 550 x height 1415 x depth 600 mm Weight 119 kg

Used tappatotor AVE 6T LUX cap. Speed: 10,000 bph. Direction: Time. 6-headed round-the-rail. Head for lux cap application. Machine management via plc siemens s7 and touch screen. Machine-side dashboard. Safety protections under EC.

Stock # U2333-5 Used cutting mill by Alpine model B32/40 RO. Mill has dimensions of inlet into cutting chamber 400 mm x 355 mm. Rotor is equipped with three knives and has diameter 315 mm x length 400 mm. Working rotation of rotor up to 700 rpm. Mill has 3 static knives. Bottom discharge through screen with mesh about 12 mm. Rotor is belt driven by el. motor with power 18.5 kW, 1500 rpm, 400 V, 50 hz. Mill has stainless steel feeding hopper with inlet dimensions: 390 mm x 240 mm. Mill is equipped with two belt conveyers. First feeding material into mill, has width of belt 250 mm, with baffles each 675 mm. Working length of conveyer 290 cm. Top of conveyer is covered with insulation. Second conveyer is for transport product from mill discharge - also has working width 250 mm, with baffles each 675 mm. Working length 200 cm. Mill has also dust filter with exhaust fan and electric contro ...

GEA Aeromatic-Fielder MP1 Fluid Bed Granulator, with two bowls suitable for batch sizes from 1 to 5kg (0.5kg/l), and 1.1 to 8kg, with drying, top spray granulation, and precision coating of pellets/mini tablets. WIP system. Class D containment, 10 bar pressure, ATEX, PLC controller on front panel, 3 stainless steel filter cartridges, solvent emission control, spray systems, full inlet air handling and preparation system. New in 2005 and unused.

Kahl Mixer Continuous Mixer Conditioner for Pellet Press Gr.3 used Manufacturer: Amandus Kahl Model: Gr.3 / Gr. III with drive motor ABB motors 380/660 V; 1470 rpm; 30 kW. For continuous conditioning, mixing of bulk materials with fissics as dosing for pellet presses . Use: - For continuous mixing of feed with liquids and steam - For melasses dry chips - In general process technology for moisturizing granular / powdery substances - General: for (all) mixing tasks in which liquids must be entered into solids Tech. Information Manufacturers - Total length approx. 2964 mm - Diameter approx. 550 mm - Total height approx. 900 mm - Distance inlet/outlet (center/middle) approx. 1950 mm - Inlet/output approx. 300x300 mm - Weight approx. 800 kg + motor approx. 245 kg Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

TS Techniek – Weiler” Oil fryer Type HOF-10000/600 all stainless steel net belt length 10.000 mm net belt width 600 mm dimensions (l x w x h) : ± 12.300 x 1.700 x 2.650 mm adjustable speed extra infeed belt thermal power 609 kW suitable for thermal oil heating with top hold down belt sediment removal system oil circulation pump OMRON touch screen control + Oil drum filter Type ODF-100 Power: 3 x 400V, 50Hz, 0.12kW Dimensions: (l x w x h) : ± 1100 x 2000 x 3000 mm + 2 pcs. Oiltank Type Oil hold tank Content: 2.500 L Dimensions: Ø1300 x 3450 mm

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

2019 technically overhauled CBN or DIA grinding in deep grinding Cover / Schalldaemmhaube with viewing window Interior lighting by halogen lamp Separate control cabinet with screen display and operator guidance Special tooth shapes: 10 forms freely programmable and stored Automatic, motorized central lubrication 1 piece of grinding wheel flange Centering pad with bolts ( x16 mm) 1 set centering rings Normal access and user manual Operating tool Colour pigeon blue Grinding range of 60 - 520 mm Saegeleaf thickness max. 6 mm Zaehne numbers 20 - 999 Saegeleaf holder bolt 16 (8) mm Grinding wheel diameter 200 mm Maximum tooth height 32 mm Grinding wheels bore 32 mm Grinding wheel drive 4 kW Grinding wheels Speed 5730 rpm Weight approx. 1150 kg

Newmix Atmi life sciences Double jacketed paddle mixer Serial: 15883-005 2011, Stainless pharmaceutical mixer with 500L double jacketed mobile holding vessel, touch screen controls, Min - Max temp 0-90' degrees, jacket volume 6L, 1Ph

As a standard solution for feeding screening machines or other processing machines, we offer our RF pipe conveyor system. As with all machines and systems of KELLNER Siebtechnik GmbH, we also use our modular system to offer individual solutions. Our RF system has been designed in such a way that the screen material can be unloaded directly as bagged goods or pre-screened via a sieve insert before it is transported to the machine. In this way, you can buy exactly the technology that you actually need in your daily practice. Our MACHINES of the RF series are also characterized by design advantages as well as simple retrofit solutions.

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 3 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 24 SH - 15 KW Blow-off device Vacuum table Scotch Brite x mm 200 Machine Control: Viet "IPC 15" Touch Screen Centering device Weight Kg: 3970

The IRS 120 Easy is the perfect entry point into cable recycling. The special combination of large flywheels and multi-part segment cutting knives makes it possible to efficiently recycle old cables made of copper or aluminium even without high power consumption and without shredding. The machine impresses with its small footprint, is easy to maintain and easy to use. Compared to most of the competition's systems, the machine has two separate fans for separator air and dust removal. This eliminates the usual interactions between more or less clogged filters and the purity of the copper granules. In addition, the separator air is not roughly adjusted via throttle valves, but by sensitive adjustment of the fan speed. This gives you the best qualities in finished copper. This machine is an immediately available storage machine and has 4 screen inserts, electronic pre-equipment for ...

Grinding width mm: 1350 Pass-through height mm: 3 - 160 Feed max m/min: 2 - 20 - Inverter KW 4 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) 01 Orbital grinding unit "Spinbrush" - KW 4 (INV) 01 Grinding unit: Grinding belt length mm: 1380 x 3250 - 15 KW (INV) Machine Control: Viet "IPC 15" Touch Screen Blow-off device 1 Blow-off device 2 Vacuum table Scotch Brite Weight KG: 7200

The turret press AMADA EUROPE 245 was produced in 2000 (machine installation: 2001). The price of the machine includes: installation and training in the use of the machine Punching machine technical data: - CNC control: FANUC 18 i-P - working time: 35,000 h - pressure: 20 t - work table: X = 600, Y = 400 - maximum punching format without intercept and with 31 stations head: 1020 x 1290 (Y-10; Y1010 T2XX; Y-50; Y970 T3XX) - maximum size of a punched sheet with an intercept: 1020 x 2540 mm - maximum size of the sheet to be punched with the intercept + 1 revolution (optional): 1500 x 2540 mm - maximum sheet thickness on the ball table: 6 mm - maximum sheet thickness on the brush table: 3 mm - maximum allowable weight on the table: 100 kg - punching accuracy: + -0.1 mm - positioning accuracy: + -0.07 mm - number of pneumatic clamps / grips: 2 - number of axes controlled s ...

Sieve drum machine Trützschler SF144 used for the processing of cotton fibres and similar fabrics. Manufacturer: Trützschler Type: SF144 with hose filters, each 15 hooks of 200 mm left and right In the middle of the machine is the sieve drum (length 1,200 mm approx. 500 mm), with fine stainless steel sieve fabric, clamped on square screen basket. Machine was used for separating/filtering cotton fibers and other light fabrics. with fan Dimensions filter box: 850 x 1,500 H 1,100 over frame, H with frame 2,300 mm Total space requirement: 2,300 x 2,000 H 2,800 mm 2 identically available. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

Powder coating plant for large parts "Kigo O.E." Example: (all large foods can be changeable individually) Space requirement: 30 x 15 meters Part size: L= 6.200mm B= 2.300mm H= 2,000mm Cleaning cabin walkable incl. sprueh wreath automatically 1 dimensions of the cabin Load length 9,000 mm Width 4,500 mm Height 3,400 mm 2 dimensions of tanks Load length 1,200 mm Width 850 mm Maximum 1,000 mm 2 dimensions of the cabin Completely Load 9.140 mm including tanks width 5,580 mm Height 4,200 mm Coating cabin walkable, manual coating 1 Dimensions Cabin Length 9,000 mm Width 4,500 mm Height 3,400 mm 2 Dimensions cabin including suction Load length 10.125 mm Width 4,500 mm Height 3,400 mm Powder incineration furnace 1 inner dimension length 6,500 mm 2 Inner dimensions width 2,500 mm 3 Inner height height 2,950 mm 4 Outer dimensions incl. therm ...

Mono-plate system Material:PE, PP, PS, ABS. Built: 1985, last modification: 2003 Screw diameter: 100 mm, L/D 36 Extruder with degassing, vacuum pump, melt pump, hydr. Screen changer, nozzle 1350 x 1.0 - 6.0 mm, 3 rolls smoothing unit 1350 x x 350 mm with single drives, 3 temperature control units for roller temperature control, cooling section, side cut, printwith 2 rubber rollers, top and bottom protective foil lamination, cross saw 1,350 mm, switch cabinets with air conditioning, separate control panel

pressure:100 t distance between columns:3000 x 1500 mm stroke:500 mm total power requirement:30 kW weight of the machine ca.:16 t dimensions of the machine ca.:4000 x 2500 x 4500 m Master cylinder:1 Stück main cylinder:135 x 90 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:90 x 50 Ø mm Table size:3000 x 1500 (mit T-Nuten) mm Ram plate:3000 x 1500 (mit T-Nuten & Federschweisungen) mm work height max.:900 mm pre-running speed:125 mm/sec return speed:100 mm/sec Speed printing phase:40 - 8 mm/sek. Hydraulic block:REXROTH demand for oil:500 l pressure control:über PLC Controll:Zweihandbedienung Daylight Opening:600 mm fied interior wide:3100 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:2 Stk pressure stop valve:max. 200 min Lineal mess stab NOVOTECHNIK:550 mm Table parallelity:0,05 mm / m² Guide rails for parallelism :verschraubt Light sensors front an ...

The profile perforating machine INTESO S3130T was manufactured in 2011 in the Czech Republic. Technical parameters: - Maximum internal diameter of the sheet metal coil: 80 mm - Maximum length of the finished product: 3000 mm Technical data : - screen control panel: SIEMENS - maximum length of profiles: 3000 mm - maximum cross-section of perforated profiles: 120 x 80 mm; fi 80 mm - automatic linear feed - optical sensor for automatic control of the correct length of the part - linear positioning of the hydraulic cylinder stroke - non-deformation perforation technology - the possibility of perforating profiles of various shapes - memory of perforation programs - two-sided perforation (in one operation) and one-sided perforation - automatic lubrication - maximum pressure of the hydraulic press in the line: 147 kN (15 tons) Tool accessories for the INTESO S3130 T punchin ...

Laboratory pelletization plant PE, PP, PS, ABS, degassing, engine: 20 kW, concoder, screw diameter 35 mm, L/D, degassing, pressure transducer, vibrating dosing, strand nozzle, water bath, strand granulator. Power: approx. 60 - 80 KG/hr

pressure:500 t distance between columns:1500 x 800 mm stroke:800 mm total power requirement:45 kW weight of the machine ca.:25 t dimensions of the machine ca.:2200 x 2200 x 4800 m Master cylinder:1 Stück main cylinder:500 Ø mm Auxiliary cylinder:2 Stück Auxiliary cylinder:120 x 80 Ø mm Table size:1500 x 1400 (mit T-Nuten) mm work height max.:950 mm pre-running speed:190 mm/sec return speed:200 mm/sec Speed printing phase:20 - 8 mm/sek. Hydraulic block:REXROTH Oil Tank Capacity:1500 l demand for oil:1300 l pressure control:über PLC Daylight Opening:1200 mm fied interior wide:1500 x 800 mm auxiliary motor:5,5 + 2,2 kw auxiliary pump:22 + 5,5 cc pre-run valve:NG pressure stop valve:max. 600 sec Lineal mess stab NOVOTECHNIK:850 mm Table parallelity:0,05 mm / m² column diameter:200 Ø / mm automatic fat lubrication:über Bildschirm einstellbar Guide rails for parallelism :4 fach Light  ...

Cast Film CoEx System (ABA), PE / PP, Capacity: approx. 400 - 700 kg/h, Main extruder, 120 mm, co-extruder of 60 mm, screen changer, melt pump, Co-Ex block, nozzle 1,650 mm, 2-roll chill-roll smoothing unit, cooling section, extractor, double winder with cutting device and edge control, edge trim, film measuring device thickness NDC (without measuring head), incl. operating instructions and e-plans.

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

Machine details Location 1105-02917 Machine type Machining Center - Vertical Make DECKEL-MAHO DMG Type DMC 63 V Built 2001 Control type Cnc Location France Origin Germany Delivery JULY 2020 Freight base from stock, freely loaded Price On request Technical details x-Way 630 mm y-way 500 mm z-way 500 mm Table size 800 x 500 mm Spindle mount ISO 40 Range 0 - 8000 rpm Feeds - longitudinal/transverse/vertical 1 - 30000 mm/min Rapids - longitudinal/transverse/vertical 30 m/min Number of tool magazine slots 24 Tool diameter at full assembly 80 mm Tool diameter at 2 free spaces 140 mm Tool length max. 300 mm Tool weight max. 7 kg Table load 500 kg Spindle motor 9 / 13 kW Control Siemens 810 D Total performance requirements 30 kVA Machine weight approx. 4.2 t Information Tested machine ready for demonstration under current YEAR OF ...

Folding machine 360 Touch screen Electronic variable speed drive Flat pile feeder, with head suction Compressor Rotary Suction Double Sheet System Antisound covers Stream delivery Machine specially designed for the folding of brochures, allows a minimum fold of 20 mm Spiral rollers (to avoid wrinkles) similar to MBO Module to launch the narrow folds to the 2nd unit (if machine has 2nd unit) Vertical delivery stacker for optional microfolding Technical specifications Max. Format: 360 X 850 mm Min. Format: 85 X 100 mm Min. Folding: 20 mm Max. Speed: 180 m/min Paper thickness: 40-250 grms Weight: 1500 kg Can be configured from 4 to 12 buckles in a single unit (Also available model 470)

• Palletizer BERCHI mod. GENIUS PTF: • Year: 2001 – completely regenerated 2016 • Producer: BERCHI • Speed (BPH): 50/55 packs per minute • Suitable for palletising crates, bundles, and cartons • No. 3 cadenzers • No. 1 divider • Roll Forming Roller • Double channel roller • Lung roller • Pallet magazine • Automatic filling machine with flap storage • New electrical system with management via PLC and touch screen • Code R 10

We offer you a used pallet racksystem manufacturer Jung Heinrich for sale. Technical data on the pallet racking system: Shelving system: Jung Heinrich Type: T Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 19,600 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Technical data on volume: Number of pallet slots per field: 12 pcs. Number of pallet slots per row: 60 pcs. Total number of pallet slots: 60 pcs. based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 450 kg Included are: 06x Pallet rack, used Material color: blue Stand profile: 100 x 65 mm Incl. transverse and diagonal st ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: Allen Bradley PanelView Plus 1000 Technical data Min. internal grinding diameter: 3 mm Max. internal grinding diameter: 50 mm Centre height: 240 mm Grinding spindle head: speeds: from: 350 rpm up to: 1200 rpm Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 2300 mm Dimensions of the control: Length: 450 mm Width: 1000 mm Height: 2400 mm Various accessories: Touch screen Wheel trueing attachment Vibrating / oscillating conveyor Status light Loading attachment Parts catcher Switch cabinet Air conditioner

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 16,798 mm Number of fields per row of shelves: 05 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 06x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 20x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

We offer you a used pallet racksystem manufacturer Redirack for purchase. Technical data on the pallet racking system: Shelving system: Redirack Technical data for the list: Number of rows of shelves: 01 pcs. Length per row of shelves: approx. 80,315 mm Number of fields per row of shelves: 24 pcs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of planes plus ground plane: 02 pcs. Included are: 25x Pallet rack, used Material color: blue Stand type: H Stand profile: 83 x 83 x 15 x 2.50 mm Incl. transverse and diagonal struts, Footplates The stands are pre-assembled ( welded truss ) 1,500 mm high 1,050 mm deep 96x Pallet rack trusses, used Material color: orange Box profile: 130 x 50 mm Design: Head traverse clear width: 3,260 mm max. load per pair of trusses 2,500 kg at the same rate. distributed load  ...

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Grinding wheel diameter: 0 mm Grinding wheel width: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Min. grinding diameter: 0.5 mm Max. grinding diameter: 30 mm Max. workpiece length for infeed grinding: 0.5 - 40 mm Grinding wheel: diameter new wheel: 400 mm Width: 125 mm Bore: 203.2 mm Speeds: number (steps): 2 from: 850 rpm up to: 1700 rpm Peripheral speed: 16 / 32 m/s Regulating spindle: diameter new wheel: 225 mm Width: 125 mm Bore: 80 mm Speeds: stepless from: 0 rpm up to: 120 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 2500 kg Overall dimensions machine: Length: 2500 mm Width: 2000 mm Height: 1800 mm Various accessories: Touch screen Coolant system Set of flanges Wheel trueing attachment Full splash cabin

CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 15 mm Standard configuration Machine - Working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable laser light cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Power supply for TruDisk by the machine - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning TRUMPF laser - Solid-state laser TruDisk 5001 with 1 laser output -  ...

working range: 1270 x 1270 mm Punch power: 180 KN Plate thickness max.: 6,4 mm Standard equipment: - Rotatable tool adapter - Autom. repositioning device with presser foot - Autom. Tool changer with 9 stations - 2 clamps - 9 cartridges - Part chute 200 x 200 mm with parts sorting into 2 containers - 2 part container - Brush tables - Multitool - Vaccum slug removal - Chip container - Rapid shutdown device hydraulic - TFT colour screen 10.4 - 3,5 disk drive - Graphic programming ToPs 2000 - Safety light barrier 2 radial - BNC and RJ45-network connection Additional equipment: - Function Tapping - Function engraving/rapid beading - Tool spray lubircation - Table extensions - Tool setting aid

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D SL Laser power: 5000 W Beam on: 29.712 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 20 mm Standard Machine Specification: Machine - working range in 3000 x 1500 mm - Closed machine - Integrated cabinet - Optional barrier-free installation - Automatic pallet changer in longitudinal direction - Torque drive in combination with direct linear drives - Enclosed beam delivery via fiber optic cable - Chiller for machine cooling - Integrated electrical cabinets with inside light - Common ON-OFF Switch for machine and laser - Conveyor belt for small parts / slug - Work area lighting - Positioning laser diode - Spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assem ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: SPS SIEMENS SIMATIC HMI TOUCH Operating hours: 0 Technical data Centre height: 100 mm Distance between centres: 400 mm Grinding wheel: Diameter: 300 mm Width: 30 mm Bore: 127 mm Workpiece weight on centres max.: 20 kg Grinding wheel speeds: number (steps): 3 up to: 2450 rpm Hydraulic cross travel: 170 mm Angular displacement: 30 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 1200 rpm Spindle hole: 20 mm Spindle taper:: 4 MT Taper in tailstock:: 2 MT Spindle stroke: 20 mm Spindle diameter: 32 mm Table angular displacement: 30 ° Feeds: Z axis (longitudinal travel): 100 - 3500 mm/min X axis (transversal): 0.01-9 mm/min External Grinding wheel motor: 4.5 HP External Grinding wheel motor: 3 kW Internal Grinding wheel motor: 1.1 kW Machine´s weight about: 1600 kg Overal ...

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Control: SPS SIEMENS SIMATIC HMI TOUCH Technical data Centre height: 100 mm Distance between centres: 400 mm Max. Longitudinal travel: 400 mm Grinding wheel: Diameter: 350 mm Width: 50 mm Bore grinding wheel width: 50 mm Table load max.: 20 kg Workpiece weight on centres max.: 20 kg Grinding wheel speeds: Peripheral speed: 30 m/s Angular displacement: 15 / 30 ° Work piece spindle head: speeds: stepless from: 30 rpm up to: 1200 rpm rotatable: 90 ° Spindle taper:: 4 MT Table angular displacement: 30 ° X axis (transversal): 0.01-9 mm/min Table speed: stepless from: 100 mm/min up to: 3500 mm/min Voltage 50 Hz 3x: 380 Volt Internal Grinding wheel motor: 1.1 kW Total power required: 10 kVA Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1600 mm Width: 1400 mm Height: 160 ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Number of pallets: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC 0i - MD 7 512 kB / Touch screen Technical data Table length: 300 mm Table width: 260 mm Longitudinal travel (X-axis): 150 mm Transversal travel (y axis): 225+50 ATC mm Vertical travel (z axis): 200 mm Table load max.: 80 kg Distance from vertical spindle to table: 140 ~ 340 mm Taper in spindle: HSK-E32 Spindle speeds: stepless vertical from: 100 rpm up to: 30000 rpm Tool changer: number of tools: 17 Rapid traverse:: 30 m/min Milling spindle motor: 3.0 / 4.5 kW Total power required: 12 kVA Machine´s weight about: 2000 kg Overall dimensions machine: Length: 1750 mm Width: 600 mm Height: 1800 mm Various accessories: Handwheel electroinic Full splash cabin Coolant system: 120 ltr. Tool changer: (number of tools): ...

working range without repositioning X: 2500 mm working range Y: 1270 mm Control: Bosch PNC-P Punch power: 165 KN Laser power: 3000 Watt Plate thickness max.: 6 mm Standard configuration Machine - Working Range 2500 x 1270 mm - Stable C-frame for easy access - Coordinate guide for high precision machining - Linear magazine with 19 tool stations including and 2 clamps - Drives with maintenance-free 3-phase servo motors - Repositioning unit with programmable stripper - Brush tables - Parts chute 300 x 500mm - Chip container - Good parts container - Enclosed beam delivery via fiber optic cable - ContourLine - FocusLine - NitroLine - Seperate main switch machine and laser Punching head - Hydraulic punching head - Programmable presser foot - Tool length compensation - Spray lubrication for punches - Vacuum slug removal - forming Control - Open controller based on ...

X working range max .: 3000 mm Y Working range max .: 1500 mm Z working range max .: 115 mm Control: Siemens Sinumerik 840 D Laser power: 5000 W Beam on: 21.067 h Plate thickness St. Max .: 25 mm Plate thickness Va. Max .: 20 mm Plate thickness Al. Max .: 12 mm Standard configuration - Closed machine frame with integrated laser unit - Automatic pallet changer - Conveyor belt for small parts / slug - Gantry drive in combination with direct linear drives - Universal quickchange device for cutting head - Lens cutting head with 250mm focal length - Programmable cutting gas pressure - ControlLine: automatic height control and sheet edge detection - AutoLas Plus (FocusLine) - Laser power control - Positioning laser diode - SprintLine (FastLine) - PMS (PlasmaLine) - Automatic metal sheet detection - PierceLine - Programmable power cycles - Work area lighting - Automatic shut-down devi ...

M. No.: 20051619 Basic Functions: Slit, Cross cut, Crease In-feed paper size: 210(W)x210(L) to 370(W)x520(L)mm Minimum finished size: 55(W)x45(L)mm Paper weight: 120 to 400gsm Depending on paper quality Operation: 4" Touch Screen Job memories: 263 preset jobs & 150 customized job memories. (100 MANU SET + 50 FLEX MODE) Feeding mechanism Upper belt tri-suction suction feed (Patented) Side blower Skew adjustment Side aligner Double feed detection Cut mark registration Feed tray stacking capacity: 100mm Speed 8.8 sheets / min. : SRA3 21up business card 11 sheets / min. : SRA3 8up post card 12.2 sheets / min. : SRA3 4up greeting card 15.4 sheets / min. : A4 2 cuts & 1 crease

Funnel hacker - Shredder DHB DH 600 Rotor width: 600 mm Rotor diameter: 220 mm Number of knives: 28, concave sanded, quadruple rotatable Engine power: 18.5 kW Electrics: 400V, 50 Hz Control: Control cabinet, blower cooled, Siemens PLC Opening: 600 x 785 mm Funnel volume: approx. 0.60 m3 Screen: 20/25 mm mounted (screen size 10-80 mm possible) Hydraulics: 40 litre tank, external gear pump Dimensions: 1750 x 1280 x 1650 mm Weight: 1820 kg Throughput: 1-3 m3/h, depending on material and screen size Suction nozzle: 160 mm Suction capacity: min. 28 m/s extended funnel

Manufacturer: Arburg Type: 270C 400 - 100 Built: 2000 Control: Selogica Closing force: 400 kN Closing type: Hydraulic Tie bar distance: 270 mm x 270 mm Plate size: 446 mm x 446 mm Tool installation height: min 200 mm Opening distance: 350 mm Plate spacing max.: 550 mm Screw: 30 mm Lifting volume: 70 cc / 64 gram hp Spray pressure: 1550 bar General Engine: 11 kW Heating: 5.9 kW Dimensions: 3.42 m x 1.5 m x 1.7m Weight: 1980 kg Screen text: German Additional equipment Core train: x1 Robot interface

Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...