san used for sale

Belt sander Timesavers 900 WWS Year of construction 2006 Serial number 2217/043 units, pre-deburring, deburring, finishing belt 900 mm throughput max. 150 mm50 Hz, 400 V, 58 kW Dimensions: 3500 x 1900 x H2100 mm, weight 4000kg

0.75kW, equipped with 2 brushes.

1st sanding unit roller, 25HP 2nd sanding unit schuuur pad, 20HP

Dear customers, here we offer you a new high-precision disc grinding machine for sale. This is a Swiss precision machine. Here are some technical data: Grinding wheel: Ø900 mm Table dimensions: 450 x 1,200 mm Table extension: 300 mm Grinding wheel inclination: +/- 30° Motor power: 4.0 kW Speed: 600 min-1 Clockwise and counterclockwise rotation with visual display Voltage: 3 x 400 V, 50 Hz Suction nozzle: Ø150 mm with engine brake with machine lamp with digital angle display Weight: 460 kg Price plus VAT, which will be shown separately on the invoice. If you have any questions, please do not hesitate to contact us.

Inv. Num. : 6410 Type: DBS-200RCS Producer: S.A.F. Created: 2012 Parameters: Machine dimensions: 11.5 x 5.15 x 3.86 m The line consists of: - Blasting chamber - Dust collector OP 9 - Blowgun - Exhaust fan - DONALDSON TORIT filter cartridges -Lift - Two-stage abrasive cleaner - Summary conveyor belt - Electric control panel with control panel - Compressor ALMIG BELT 37-8 - Automatic steam trap Bekomat 13 - Compressor BELT 4-37

Belt sander Sander Vangroenweghe F-1060 Working width: 1060mm Sanding belt motor: 20 HP Motor feed-through: 3 HP Height adjustment: 1 HP Exhaust nozzle: 200mm Weight: 2000 kg Machine dimensions: 2300x1500x2000mm Sanding belt dimensions: 1060x1900mm Max. sanding thickness: 200mm Throughput speeds: 5-10 m/min

Top-bottom sander Houfek SPB 1300 Duplex Serial Number SJ-031 Year of construction 2017 Min-maximum workpiece height 10-160 mm Maximum working width 1300 mm Throughput 4/12 m/min Sanding belt dimensions 19001320mm Motors 11kW Upper sander 2x contactals 1x Combi roller Sander 2x contactals 1x Combi roller CD software available Including manifold for extraction line 110.4kW, 223Amp.

CMC MS 120 Y1 X1 MA Year of construction 2004 5kW Sanding brushes: Left/Right Above Under Above Above Min/Max working width 500/1200mm Min/Max working thickness 10/120mm

1st: sanding aggregate roller Engine 18,5kW (25HP) Roll diameter 250mm 2nd: Sanding aggregate sanding pad Engine 15kW (20HP) 2x steel roller

SECOND-HAND SANDING MACHINE FOR TURNED PIECES LOCATELLI MOD. ORIENTAL MATIK 1200 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 1200 mm

SECOND-HAND WIDE BELT SANDER COSTA MOD. 60 CC/2 1150 - CE RULES - Working width 1150 -Volt. 380/50 - S/N 951121/DR3 - Year 1996

Belt sander Sagrima Holland W2 1350 URP, CE Sanding belts 1350900mm Maximum sanding width 1350 mm Year of construction 1997 400V, 63Amp. Required extraction capacity 7200m³/h. Machine has a bad tire.

Long belt sander Samco LS-3000 Working width 3000mm Height adjustment 720mm Sanding belt length 8100mm Main engine 3HP 380V 8.9 Amp Overall dimensions 4180x1970x1615mm (LxWxH)

SECOND-HAND TOP AND BOTTOM CALIBRATING AND SANDING MACHINE TAGLIABUE MOD. L 600/11 - Working width mm. 600 - Useful working high 130mm - Min. thickness piece 3mm - Composition: Bottom: roller (80sh) + roller + air blower Top: roller (80sh) + roller + brush - Shoe pressers - Abrasive belts length 2620 - Vacuum device - Electrical panel - Motor 20kw - Max. working speed 24 m/min - CE rules (year 1999) - Dimensions 5300x1700mm

Height 120 cm

-Combination belt sanding, -disc sander, -disc diameter 150mm, -Belt sanding part can also be raised 90 degrees.

SECOND HAND SANDING MACHINE FOR TURNED PIECES GENINI MOD. LAR 90 - With automatic loader - No. 2 abrasive belts -Brushes - No. 6 spindles - Working length 900 mm

SECOND-HAND LONGITUDINAL SANDER COMEC MOD. LON LS - CE RULES -Volt. 380/50 - S/N 970408 - Year 1997

Belt sander Boere TKS 1300 380V Maximum sanding width 1300mm Maximum sanding height 150mm 1st: sanding aggregate roller Motor 30 kW Roll diameter 250mm 2nd: Sanding aggregate sanding pad Engine 15kW (20HP) 2x steel roller Transport dimensions: 2400x1600x2400mm (LxWxH), Weight 4500kg

Machine number 1407

Description SABLUX sandblasting system with storage tank

KEF 3.6Kw electric motor,

SECOND-HAND TOP BOTTOM WIDE BELT SANDER SAC SUERI MOD. 4R300 - Working width 300 mm - Max thickness 150 mm - Min. thickness 5mm - Min. pieces length 240 mm - 2 Top Belts: Roller + Roller - Diam. 240 mm - 2 bottom belts: roller + roller - diam. 240 mm - Feeding speed 4-16 m/min - N. 4 motors 4 Kw each - CE rules (year 1998)

BLASTING MACHINE WITH ROLLER CONVEYOR Shot peening machine Manufacturer: GIETART Type: 8739 Type: Roller conveyor workpiece width: 1500 mm workpiece height: 550 mm workpiece weight: 600-800 kg/m

SECOND-HAND CN SANDING LINE FOR STRAIGHT AND CURVED ELEMENTS OMEF MOD. FUTURE -Loader - 2 Top Transversal Horizontal Belts - 2 Bottom Transversal Horizontal Belts - 1 top horizontal longitudinal pneumatic roller - 1 bottom horizontal longitudinal pneumatic roller - 2 Right Vertical Transversal Belts - 2 Left Vertical Transversal Belts - 1 right longitudinal pneumatic roller - 1 left longitudinal pneumatic roller - 2 Orbital Sanders - CE rules - Year 2000

- Producer Costa - Working width 1.300 mm - Year of construction 2003 - Working height ~ 850 - 950 mm - 1. Unit - Spindle with brush head, D 180 mm - grain size P180 - Driving speed infinitely adjustable U/min - Motor power 0,75 kW - Spannungsschwankungen max. +/- 5 %

Description: . Approx. Onsite Dimension. (l x w x h): 800 x 600 x 1,300 mm, weight approx.: 80 kg

Double-sided grinder Prosand for boxes Two grinding units Oscillated aggregates Grinding height 270mm Pneumatic access to the material Electrical setting of ground material Motor power: 2×5.5kw

Sandblaster COMO type LC 05 Year of construction: 1987 Internal dimensions: Width 790 x Depth 590 x Max Height 650 mm Opening of the 2 sides possible Equipped with 1 integrated dust vacuum cleaner Voltage: 380 V Width: 900 mm Depth: 1200 mm Total height: 1700 mm Weight: approx 200 kg

Bütfering Wide belt sanding machine FBS 800 Product name: Wide belt grinding machine Type: FBS 800 Manufacturer: Gebrüder Bütfering Machine number: 83221 Year of construction: 1983 Condition: Used Technical details: - for solid wood - Grinding width: 800 mm - Strap width: 810 mm - Band length: 1,900 mm - Workpiece thickness: max. 90 mm - Feed speed: 10 and 20 m/min - Power requirement sanding belt drive: 15hp optional 20 hp - Feed drive: 1/1.5 hp - Cleaning brush: 0.75 hp - Weight: approx. 1,800 kg - Cleaning brush on the spout side (2x) - pneumatic belt tensioning Engine data: - Voltage: 380 V (note the direction of travel) - Current: A 2.8 / 22.4 - Power: 1.1 / 11.0 kW - Revolution: 1450 / U1=2,800, U2=3,060 Suction: - 3 x suction nozzles: diameter 140 mm, 160 mm, 200 mm Retrofitting/reassembly of a small table for acc ...

Description: SN 010755649 Loading with forklift Approx. Onsite Dimension. (l x w x h): 6,055 x 2,435 x 2,800 mm, weight approx.: 2,000 kg

Approx. Onsite Dimension. (l x w x h): 2,300 x 2,800 x 1,000 mm, weight approx.: 400 kg

working width: 950 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; read out height: digital; electronic control: Fox 500 KTR; aggregates: 1; 1. aggregat: Combination unit for calibrating and sanding / Slant-grooved steel roller Ø 120 mm with height fine adjustment / Hard sanding pad with graphite pad; dust brush: no; motor power: 7,5 kW; suction connection: 140 mm; machine length: 1388 mm; machine width: 1545 mm; machine height: 1668 mm; weight: 660 kg; - Also for smaller craft shops for occasional use - Combination sanding unit with sanding shoe for fine sanding - Standard with diagonally grooved steel roller Ø 120 mm for calibration - Fine adjustment of the working height - Clear control panel on the front - Robust tube-stiffened monobloc steel machine body, robot welded, high-mounted working units for maximum rigid ...

Sanding unit IMA Type: 08.062 - oscillating

Profile sanding unit IMA Type: 08.063

Sanding units Make: Heesemann Type: M2

Sanding unit Make: HOMAG Type: PS10

Working area X/Y/Z: 1200mm/1200mm/840mm, dimensions X/Y/Z: 1300mm/1300mm/2010mm, weight: 650kg, sound level: 70dB(A) without blasting, 82dB(A) with blasting at 3 bar, max compressed air: 10bar. Including an electronically infinitely variable steel turntable (diameter: 1000mm), a blasting agent drying system and a second blasting gun unit with carbide blasting nozzle. Documentation available.

Make Ideal Standard, Vidima, Börma & Grohe Model: Mix sizes, list available upon request Year of manufacturing: Unused Dimensions LxWxH (mm) 8 EUR pallets Total quantity in stock 458 Country of origin EU ( Belgium - Germany) Selling conditions As stock only, no seperated sales

TEPARK KPI-115-ST500 sandblasting cabinet manufactured in Poland in 2011 is used for thorough cleaning of small and medium-sized workpieces using abrasive materials such as electrocorundum or steel shot. The cabin sandblasting machine’s structure is made entirely of welded sheet metal to ensure high durability and tightness. Inside the machine is a fully lit working chamber with a 150 kg rotary table. The total weight of the sandblast machine is 280 kg. Technical data of the TEPARK KPI-115-ST500 sandblasting machine - maximum workpiece weight: 150 kg - work chamber size (L x W x H): 1150 x 900 x 800 mm - rotary table - injector gun - chip extractor: DEDRA DED7724 - workspace illumination - pressure: 10 bar - power supply: 230 V; 50 Hz - weight of machine KPI 115 ST500: 280 kg

There are one Valeria 2CC INF. 1350 and one Valeria 2CC SUP. 1350 available, weight machine 1/ 2: 5.35/ 4.4t.

Band dimensions: 150x7800mm, grinding width: 1000mm, power: 6.6kW, length: 3950mm, width: 2300mm, weight: 900kg.

Usefull width: 1030 mm. Sanding belt sizes: 1060 x 1900 mm. Number of sanding units: 3 Roller 15 kW, Roller 15 kW, Pad 11 kW Max. pass in thickness: 200 mm. Feed speeds: 5 and 10 m/min Motor feedbelt: 2,2 kW Pneumatic belt tensioning and oscillation Motorised height adjustment, motor 0,75 kW, readout up to 1/10 mm. Automatic thickness adjustment revision in 2017

working width: 1100 mm; min. workpiece height: 4 mm; max. workpiece height: 170 mm; height adjustment: electrically; workpiece thickness display: digital; aggregates: 2; 1. aggregat: angular grooved steel roller Ø 120 mm, fine adjustment for calibration, pneumatic on/off of the roller; 2. Aggregat: Combination unit with finely adjustable working height for calibrating and fine grinding: rubber-coated roller Ø 120 mm (45 Sh), hard grinding shoe with graphite coating on replaceable insert and pneumatic on/off of roller; Link grinding shoe: elastic, sector distance 56; Electronic control: FOX 500 KTR; dust brush: no; motor power: 15 kW; suction connection: 2 x 140 mm; machine length: 1650 mm; machine width: 1820 mm; machine height: 1960 mm; weight: 1170 kg; The LIBRA 35 calibration and fine grinding machine is an extremely versatile machine that can be used in differ ...

Brush sanding machin with 3 working units. Machine has only a few operating hours. 1st working unit: - 5 rotating heads with 3 discs each - disc diameter 125 mm - quick change of the discs - motorized height adjustment 2. Station: - brush with diameter 300 mm - motorized height adjustment - Electronic inverter 4 kW 3. Station: - brush, diameter Durchmesser 300 mm - motorized height adjustment - Electronic inverter 4 kW - Rotative blower cleaning panel - Touch Screen IPC COMPACT 8,5 - conveyer with vacuum table - vacuum fan 7,5 kW - Vorschubgeschwindigkeit wird über einen FU geregelt - conveyer electronic inverter 2,2 kW - Producer Viet - Type Opera 5-3.3 XLL - Working width 1.350 mm - Year of construction 2018 - Working height 900 mm - Max. part height 200 mm - Vacuum transport belt - Operating side, left - Standort, nicht am Lager in Litauen - Voltage / HZ 400/50 - Spannungssch ...

- Producer Costa - Type BF 25-1350 - Working width 1350 mm - Year of construction 2002 - Number of brush heads 2 Stk. - 1. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Bürstenkopf tiltable 0 - 30 Grad - 2. Unit - Spindle with brush head, D 350 mm - Producer brush head Flex Trim - grain size 220 - Brush heades tiltable 0 - 30 Grad - Unit height adjustable - Vacuum transport belt - Operating side, left - Location - Druckluftbedarf, Enstaubung 4 bar bei 340 L/min - Diameter Connecting piece 4 x160mm mm - Absaugleistung 3.600+2.500, Gesamt: 6.100 m³/h - Airspeed, exhaust system 24 m/s - Switch cabinet built into the machine - Total connection 35 A / 15 kW - Voltage / HZ 400 / 50 - Spannungsschwankungen max. +/- 5 %