saf turning gear used for sale

Key data: 60

Extruder 1 spindle: 60 mm Ø, 25 L/D, brand: Safinio, motor: 20 hp, variable speed drive, brand: Omron, model: F7, alternating current: 30 kw and electrical panel.

Main technical data: Center height: 560 mm Distance between centers: 5000 mm Bar passage: 105 mm The lathe is in good condition, being cleaned and visible at Ns. site.

Center height: 860 mm Center distance: 4750 mm Spindle bore: 100 mm Swing over bed Ø:        860mm Swing over cross slide Ø:625mm Swing in the gap Ø:      1200mm DBC Turning Length:      3000 to 4750mm Gap length:              1750mm Spindle bore:            100mm Speeds / ranges:         800Rpm Feed rate X-Axis:        5000mm/min. Feed rate Z-Axis:        5000mm/min. Length:                  5200mm Width:                   2000mm Height:                  2100mm Weight:                  8000kg

Turning diameter: 1550 mm Center distance: 12500 mm Spindle bore: 100 mm Numbers of bed guide ways: 2 Weight between centres maximum: 22000 kg CNC Brand: Siemens CNC Model: SIEMENS 840D Full C-Axis 360.000 Positions Revolver 12 positions with live tools Live tools 22 kW ans 2250 Rpm Capto C6 tool system C-Steady rest 100 -   500  C-Steady rest 500 - 1000 Package tool holders radial and axial Swing over bed Ø:        1550mm Swing over cross slide Ø:1260mm DBC Turning Length:      12500 (15000)mm Workpiece weight:        22000 Power:                   100A Speeds / ranges:         0,05 - 600Rpm Feed rate X-Axis:        6000mm/min. Feed rate Z-Axis:        6000mm/min. Length: ...

Mig Mag - Tig 240 amp - 60% with toch dimensions: 1100 x 500 x 950 mm weight: 190 kg

Safan HVS 2050 x 16 mm Cutting length: 2050 mm Max sheet thickness st 45: 16 mm Backgauge: 1250 mm Adjustable cuttingedge: 0,5 > 4° Electric motor (power): 18,5 kW Length: 3100 mm Depth: 2530 mm Height: 2000 mm Weight: 9 ton Number of sheet holders: 11x

Rounds: 3 mm Squares: 120 mm Flats: 120 mm Flats on edge: 120 mm Angles: 0 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Tauring - DS 120 MACH-ID 7641 Make: SAF Tauring Type: DS 120 Year: 1986 Horizontal and vertical:H + V Shaft Ø:               120mm Number of rolls:       3 x 315 Capacity flat:         120 x 45 x 750mm Capacity Tube:         180 x 3 x 2500Ø x mm Capacity bar:          80 x 80 x 300mm Capacity T-Profile:    120 x 120 x 13 x 2500mm Working speed:         0 - 5mm/min. Length:                1600mm Width:                 1800mm Height:               ...

Rounds: 3 mm Squares: 1 mm Flats: 1 mm Flats on edge: 1 mm Angles: 1 mm (1) horizontal / (2) vertical: 1   Profile bending machineSAF Curvatrici - CS 60  Digitral readout position upper roll Left & Right mode Horizontal & vertical positioning 3 sets off rolls included Hydraulic adjustment upper roller Horizontal and vertical:H + V Shaft Ø:               50mm Number of rolls:       3 x 165 mm Horizontal:            Horizontal Stroke X-Axis:         200mm Capacity flat:         60 x 12 x 800mm Capacity Tube:         2" x 800Ø x mm Capacity bar:          35 x 35 x 800mm Capacity T-Profile:    60 x 60 x 900mm Working speed:        & ...

Capacity: 110 t Folding length: 3100 mm CNC Brand: _Unknown / Other CNC Model: CNCL PressbrakeSAFAN - CNCL MACH-ID 7658 Make: SAFAN Type: CNCL Year: 1993  Max. bending length:        3100mm Distance between column:    2550mm Max. pressing force:        110T Dis. Beam - Table:          480mm Beam stroke:                180mm Troth beam:                 400mm Approch speed:              65mm/min. Working speed:              9mm/min. Return speed:               65mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis:  4 Power:                 ...

degree: 1200° working heigth: 250 mm length: 6000 mm width: 400 mm depth: 250 mm Control: Siemens total power requirement: 99 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 25 x 2 x 3,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Width: 450 mm -Depth: 630 mm -Height: 1035 mm -Internal drawer dimensions: 330 x 630 mm -Drawer heights: 260 mm -Weight: 216 kg

Safeline Twin head metal detector Serial: 115464 Stainless twin lane metal detector, ferrous in foil head, belt dimensions 2100mm x 100mm, aperture 150mm x 160mm, with pneumatic blow reject into reject bin, bin full sensors, 3Ph

Bending capacity 80 t Bending lenght 2550 mm Throat 650 mm Vertical stroke 300 mm

4/3-way valve, solenoid valve, hydraulic valve, pressure valve, valve block, control block, hydraulic control block, control unit, control valve, directional spool valve -Manufacturer: Rexroth, hydraulic control block from guillotine shears SafanTyp VS 255-4 -Hydraulic valve: Hoerbiger L-VAM220PO6A1P -Dimension.: 450/310/H250 mm -Weight: 19 kg

hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Manufacturer: Sauer, hydraulic unit from guillotine shears SafanTyp VS 255-4 -Hydraulic pump: Sauer Type 4 P 023 LM 929 -Motor: rotor 5.5 kW / 1450 rpm -Hole distance: 215/140/Ø12 mm -Individual components: see photos -Dimensions: 735/350/H300 mm -Weight: 88 kg

Stop for press brake, cant bench, guillotine shears ... -Manufacturer: Safan, stop for guillotine shears type VS 255-4 -Stop length: 2500 mm -Motor: ICME 0.18kW -Clamping angle: 2 pieces -Individual components: dimensions see photos -Transport dimension: 2500/1040/H220 mm -Weight 324 kg

Respiratory protection filter -Art. No.: 500 01 67 A2B2-P3 -Price: per piece -Number: 8 pieces -Weight: 0.5 kg/piece

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Piston diameter: approx. 135 mm -Piston rod: Ø 60 mm - Stroke: 1020mm -Max. Pressure: 175 bars -Number: 2x available -Price per piece -Dimensions: 1660/235/H200 mm -Weight: 130kg

Shock absorbers, gas pressure springs, shock absorbers, start-up dampers -Tube: Ø 82 mm -Total length: 510 mm -Recording hole: Ø 24 mm -Number: 2 pieces of shock absorbers available -Price: per piece -Dimensions: 82/82/H510 mm -Weight: 11.5 kg/piece

Slack adjuster manual, slack adjuster, brake slack adjuster, brake adjuster -Number: 5 pieces available -Price: per piece -Dimensions: 310/160/H50 mm -Weight: 3.6 kg/piece

machine Saf-fro Oxytome 25 for sale equipped with: two Harrison gas burners Saf-fro CPM360 plasma torch with Nertajet HP300 source and the Friojet cooler - 30 plus the Mark MDX900 air dehumidifier.

Max. Twisting capacity 16x1,5 (Steel pipe) Max.Bending Radius 40 mm Twisting speed 500 ° / s Unlimited program writing Control unit Bosch Rexroth Twisting precision ± 0.05 ° Max.bending angle 185 ° Feeding length 2000 mm Unlimited number of bending programs Rotation speed 720 ° / s Feeding precision ± 0.05mm Feed speed 1.2m / s Rotation accuracy ± 0.05mm Twist direction change time 3 sec Weight 850 kg Dimensions (Width) 1000 mm Dimensions (Length) 3250 mm Dimensions (Height) 1800 mm

Key data: 50 t, 2550 mm, 2050 mm

- Pressure: 50 t - Working length: 2550 mm - Stand width: 2050 mm - Bending capacity: at 1 m - up to 10 mm - Space requirements (W x D x H): 2.9 x 1.6 x 2.3 m - Machine weight: 4200 kg - Total power: 4.5 kW - Condition: very good Details little run, very good condition, cylinders all tight, press control type PSSAS Accessories Miscellaneous bending tools, documentation, stands for tools

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, hydraulic cylinder press brake -Manufacturer: Safan, 2 hydraulic cylinders from press brake type UC 110-3100 -Piston rod: Ø 150 mm -Stroke: 180mm -Piston: with return spring -Add-on parts/directional valves: see photos -Price/tax: complete -Dimensions: 640/225/220 mm/piece -Weight: 270kg/piece

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, control transformer, safety transformer -Manufacturer: Schuster, transformers from press brake Safan type UC 110-3100 -Type: GLD11-3870 1mH 100A -Type: TEK-4191 500VA -Type TUK-4450 2 kVA -Type DK-3449 750 VA -Techn. Data: see nameplate photos -Levy/Price: complete -Total dimensions: 405/290/H255 mm -Weight: 51 kg

Hydraulic pump, hydraulic unit, hydraulic container, hydraulic tank -Manufacturer: Safan, hydraulic container from press brake type UC 110-3100 -Level indicator: sight glass -Total dimensions: 1950/540/H485 mm -Weight: 69 kg

General SKU290T667 LocationBarneveld MakeSafeline No.S4285 Main Features MaterialStainless steel/Polypropylene Dia/Width460 mm Specified Features - Metal detector MaterialPolypropylene, Stainless steel Metal detectorcheck Tunnel sizes460x460x400 mm With conveyor beltcheck Belt width400 mm Belt length450 mm With motor0,37 kW 220-380 Volt Information Mounted on framecheck Mounted on wheelscheck With switchgearcheck Floorspace0,9x2,7 m Total height1,3 m CEcheck Weight550 kgMetal detectorsSafeline UkPackaging machines > Metal detectorsBrand > Safeline Uk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

3 axes: Y1 / Y2 / X touchscreen control Willa upper tooling Capacity: 40 ton x 2050 mm Backgauge: CNC Control: TS Passage between uprights: 2050 mm Max stroke: 115 mm Max distance between table -- ram: 515 mm Locking speed: 90 mm/sec Working speed: 20 mm/sec Returning speed: 90 mm/sec Electric motor (power): 13,5 kW Length: 2900 mm Depth: 1850 mm Height: 2620 mm Weight: 3150 kg

Brand: Oerlikon / SAF Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity:  Carbon Steel: 15mm  Stainless Steel: 15mm  Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min

Hydraulic sheet metal cutting guillotine from Safan Netherlands type VS306, 3100 mm x 6 mm (ST40). The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 deg. 11 kW motor. The weight of the machine is 6,3 t. The machine is fast. Departure of the bumper 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 2 supports for supporting sheet metal at the front of the machine, gauge of 2500 mm, for cutting at an angle of 90 degrees. Light dash for cutting along the line. Original DTR documentation and safety instructions in Polish.

Hydraulic sheet metal cutting guillotine from Safan Netherlands type HVR 6-310, 3100 mm x 6 mm (ST40), rb. 1999. The machine is fully CNC controlled by Safan. The machine has a variable inter-knife gap, and a hydraulically variable knife angle of 0,5 -2 st, set after entering the thickness and hardness of the material. 11 kW motor. The weight of the machine is 6.3 t. The machine is b. fast, the number of cuts is equal to mechanical. Electric bumpers with reading, bumper departure 1050 mm. Electrically adjustable cutting length in the range of 10-3100 mm. 3 supports to support sheets at the front of the machine, plus a gauge of 2500 mm, for cutting at 90 degrees. Light dash for cutting along a line. Original DTR documentation and safety instructions in Polish. Riding table at the rear of the machine. Protection of the working space with infrared. The machine structurally adapted ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 2550 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 11 kW motor. Machine weight 8.2 tons. NC electric bumper with position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 30-2550 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation

SAFAN Lochem Holland rb.1996 type CNCL 80-2550 hydraulic press brake. CNC-controlled synchronous machine DNCS ARA-controlled axes-Y1; Y2; X; Crow - Wila Moducrown table deflection compensation controlled from CNC. In addition, a hydraulic die for felting-flattening sheet metal type DT005, controlled from CNC. Pressure 80 t x working length 2550 mm. Between the sides 2050 mm. Weight of the machine 6 t. Drives 11 kW. A set of tools of Amada/Trumpf system for the entire length of the machine, die V=12 mm /angle 28 degrees and punch 28 degrees/h=105 mm. This makes it possible to bend and flatten a sill 6 mm wide. Full DTR documentation. Health and safety manual in Polish. The machine meets the requirements of the EU Machinery Directive(CE).

Safan Holland servo-electric press brake type SMK-L-50-2550 -TS1, rb. 1997. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Load: 50 t CNC TS1 control -simulation of 2 D, Polish language - controlled axes Y1; Y2; X; R(pneuma) -10-point table deflection arrow compensation. In the machine a pneumatic die for felting-flattening sheet metal. Tools: Amada. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a workstation instruction BiHP in Polish.

Hydraulic press brake by SAFAN Lochem Holland, type SK 25-1650. Manually controlled machine. Very easy to use, fast and undemanding machine for a locksmith workshop, it can work in unheated rooms. Angle, pressure, transition from fast mode to bending mode and jump height are set electronically from the desktop. CNC controlled bumper, departure, cycles, programs. Pressure 25 t x working length 1650. Between sides 1250 mm. Machine weight 3.6 tons. Drives 2.5 kW. Amada system tool mounting, punch + multi-grooved matrix tool set - segmented. Full DTR documentation. Occupational health and safety user manual in Polish.

In very good technical condition, the SAFAN Lochem Holland hydraulic press brake rb. 1990/2012, type DNCS 110-3100. Press rebuilt by the manufacturer in 2012. CNC-controlled synchronous machine DNCS ARA- controlled axes- Y1; Y2; R; Crow - Wila table deflection compensation controlled by CNC. In addition, a hydraulic matrix for sheet metal folding-flattening, type DT005, controlled by CNC. The machine is equipped with an automatic sheet support system during bending and flattening at 2 heights. Hydraulic punch clamping. 4 bumper fingers with precision. Pressure 110 t x working length 3100. Between the sides 2600 mm. Machine weight 8.3 t. Drives 7.5 kW. Protection of the working area with infrared. A set of Amada / Trumpf system tools for the entire length of the machine, die V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This enables the 6 mm long window sill to b ...

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 310-3, 3100 mm x 3 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -2 degrees. 5.5 kW motor. The weight of the machine is 4.2 tons. The machine is fast and the number of cuts is equal to that of mechanical ones. CNC electric bumpers with a position transmitter with readout, bumper travel 1050 mm. Electrically adjustable cutting length in the range of 75-3100 mm. A system for magnetically supporting large sheets of metal while cutting at the rear of the machine. Support 2000 mm angle bracket, to support sheet metal at the front of the machine. Light line enabling line cutting. Original DTR documentation.

Press brake with servo-electric drive Safan Holland type SMK-40-2050 -TS1, rb. 1995. Touch screen -LCD Windows, color , graphics, menu in Polish. Bending length: 2050 mm; Uniquely large stroke: 275 mm; Between columns: 2150 mm; Pressure: 40 t CNC control TS1 -simulation of 2 D, Polish - controlled axes Y1; Y2; Y3 - (CNC controlled lower table ); X -10 point table deflection arrow compensation. Drive; 9 kW; dimensions: 3000x1800x 2450 mm, weight 5100 kg. Full DTR documentation, also in Polish, a stand instruction BiHP in Polish. For the machine we offer a comprehensive service.

Press brake with servo-electric drive Safan Holland type SMK-P-50-2550 -TS1, rb. 1999. Touch screen - LCD Windows, color, graphics, menu in Polish. Bending length: 2550 mm; Stroke: 215 mm; Between columns: 2650 mm; Pressure: 50 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R; Z1; Z2 -10 point compensation of the table deflection arrow. Infrared barriers are installed in the machine to protect the working area. Tools: Trumpf-Wila - set. Drive; 9 kW; dimensions: 3500x1800x 2450 mm, weight 5500 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Hydraulic press brake from SAFAN Lochem Holland rb in very good technical condition. 1997/ CNC control new 2023, type CNCL 110-4300 TS1. CNC-controlled synchronous machine TS1-Windows 2023, color, bending simulation, touch screen, controlled axes - Y1; Y2; X; R. New control replaced in 2023. Additionally, a hydraulic die for folding and flattening sheet metal, type DT005, CNC-controlled. Hydraulic punch mounting. 4 bumper fingers with precision controls. Pressure 110 t x working length 4300. Stroke: 180 mm. Between sides 3700 mm. Machine weight 11.7 tons. Drives 7.5 kW. A set of Amada/Trumpf system tools for the entire length of the machine, matrix V = 8 mm / angle 28 degrees and punch 28 degrees / h = 105 mm. This allows you to bend and flatten a 6 mm long window sill. Full DTR documentation. Occupational health and safety user manual in Polish.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 16-310, 3100 mm x 16 mm (ST40) The machine has a quickly changing gap between the knives with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 21 pieces of sheet metal holders. 18.5 kW engine. Weight 12.5 t. CNC bumpers with reading and setting device, bumper travel up to 1200 mm. 2 supports to hold sheets of metal at the front of the machine, and a ruler for cutting at a 90-degree angle. Light line on the material, lighting, central lubrication. electronic cutting length adjustment 10-3100 mm. Single or continuous cutting with adjustable intervals between strokes. Very fast guillotine. Knives 90% new, cutting material from 0.5 to 16 mm. Original OHS documentation and occupational health and safety manual in Polish.

Touch screen - Windows, color, graphics, menu in Polish. Bending length: 1250 mm; Stroke: 115 mm; Between columns: 1250 mm; Pressure: 25 t CNC TS1 control - 2D simulation, language Polish - Y1 controlled axes; Y2; X; R(pneumatic) -10 point compensation of the table deflection arrow. Tools: Amada-Set of tools. Drive; 6 kW; dimensions: 1900x1800x 2050 mm, weight 2250 kg. Full O&M documentation, also in Polish, BiHP workstation manual in Polish.

Inv. Num. : 4970 Type: VS 310-6 Producer: Safan Created: 1981 Parameters: Maximum cutting length: 3100 mm Maximum sheet thickness when cutting: 6 mm Maximum cutting angle: 2 h Oil tank capacity: 150 l Total power requirement: 11 kW Back gauge: 1000 mm Machine weight: 6200 kg

1 saf - 3-roller bending machine model DS 60 HV Basic version with hydraulic infeed of the upper roller, including a set of standard rollers, TIR tie rod to connect the shafts for maximum power, RCD straightener on the right side for angle iron, new replacement shaft. This machine is workshop overhauled and ready for immediate use in top condition. You are welcome to visit and test this machine with us.

sheet width: . mm plate thickness: . mm pre-bending: . : verstellbar weight of the machine ca.: 150 KG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

IMA SAFE A83 E horizontal cartoning machine with intermittent movement Machine with solid steel structure, complete with: - Full fairing to protect the operator; - Base frame painted in STEEL IT 1002; - Electrical installation in accordance with EN 60204; - Voltage 400V, 50Hz, 3-Phase, + Neutral + Earth; - Control logic by PC B&R microprocessor - Color touchscreen for programming and visualization Machine status, controlled by a second B&R PC - In-line feed belt, with intermittent movement; equipped with timing belts (absolutely no chains) and with interchangeable step cups, with the possibility of with simultaneous adjustment option, length 2000 mm; - Horizontal conveyor belt for feeding boxes with pre-alarm; - System for detecting the amount of blister packs in the feeder conveyor belt; - Minimum fill level detection in the cardboard magazine; - Group for introducing t ...

7 axes: Y1 / Y2 / X / X´ / Z1 / Z2 / V willa tooling Capacity: 80 ton x 3100 mm Backgauge: CNC Control: TS1 touchscreen Passage between uprights: 2550 mm Max stroke: 240 mm Max distance between table -- ram: 530 mm Depth of throat: 400 mm Locking speed: 300 mm/sec Working speed: 10 mm/sec Returning speed: 120 mm/sec Electric motor (power): 5,5 kW Length: 4000 mm Depth: 2000 mm Height: 3200 mm Weight: 7 ton

This Safan CNCL-K 170-3100 TS1 bending machine was manufactured in 2002. It boasts a capacity of 170 tons and can handle lengths up to 3100mm. The machine is equipped with a hydraulic tool holder and an advanced 3D collision system to ensure precision and safety during operation. Despite its extensive operating time of 18,923 hours, it remains a reliable asset for intricate bending tasks. Reach out for further details regarding this Safan bending machine.

Hydraulic guillotine for cutting sheet metal by Safan the Netherlands, type VS 255-10, 310 mm x 10 mm (ST40). The machine has a quickly changing knife gap with thickness reading, and a hydraulically variable knife angle of 0.5 -3 degrees. 15 kW motor. Machine weight 10 tons. NC electric bumper with position transmitter with readout, bumper travel 1250 mm. Electrically adjustable cutting length in the range of 30-3100 mm. 2 x supports for holding sheets of metal at the front of the machine, plus a 1500 mm ruler for cutting at an angle of 90 degrees. Light line enabling line cutting. The knives are sharp, the machine cuts copier paper. Original DTR documentation.