s4 used for sale

Year of production 1993. Bought in 2007 as efficient and operational, it was never launched in Poland. Stored in a dry room and secured with a tavern. Salvagnini S4 + P4 cutting and bending center P4_0387 model 2220 with configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H and S4_0385 about configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H P4: 2200 mm bending length, bending depth 200 mm, bending angle 125 degrees. Bending thickness 1.5 mm.

Gearbox, worm gear SEW-EURODRIVE Typ S47 LP80 ( S47LP80 ) Gear ratio ( i ): 20,33 Torque ( Ma ): max. 110 Nm input: coupling for shaft diameter: Ø 19 mm, shaft length: 30 mm, groove width: 8 mm Flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm, 4x threaded hole: M10 x 1,,5 Output: Shaft diameter: Ø 25 mm Shaft length: 50 mm Groove width: 8 mm Motor base: 120 x 105 / 115 mm hole spacing (parallel to the shaft / transverse to the shaft): 100 / 80 mm 8x Bore: Ø 10.5 mm New, with documents ! Dimensions: 290 x 220 x 200 mm

Cam switch, 3 steps 28-pole, tap-changer SÄLZER S440 30 kW 600 V 70 A AC 24-pole S212 7,5 / 5.5 kW 600 V 15 A AC 4-pole used, tested ! Dimensions: 245 x 88 x 88 mm

Sensor head KEYENCE LV-S41 12 - 24 V DC light type: Visible red semiconductor laser, wavelength: 655 nm range: 150 - 600 mm approx. 2.0 m Connection cable New ! Dimensions (sensor, without cable): 28 x 23 x 7 mm Dimensions (packaging): 110 x 105 x 25 mm

type mechanic: IRB 6400 2.4-120 M97 type Control: S4C max. load: 120 kg workingrange: 2400 mm net weight: 1870 kg functional checked!

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage Price on request

Make: BITZER Type: S4G-12.2-40P Funding volume: 42.3 m3/h Built year: 1997 with 3 compressors for freezing Two-stage with switch box Price on request

ABB IRB140 with S4C+ controller

DRO- ELESTA x-travel 650 mm y-travel 450 mm z-travel 140 mm w-travel (head) 500 mm feed range 0 - 1500 mm/min table surface area 770 x 630 mm spindle speed 4.500- 80.000 rpm spindle speed with turbine 100.000- 160.000 rpm Perfect condition. Just start up and test run, about 200 hours.

Our Leybold Varovac S400 rotary vane vacuum pump is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Leybold Varovac S400 Rotary Vane Pump wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty

Grinding length

diameter range 0,8-1,8 mm nail length 10-40 mm output - pieces/min 550

table diameter: 400 mm workpiece weight: 315 kg table height: 360 mm max. height (90° position): 635 mm height of the swivelling axis: 240 mm distance table center - swivel center: 485 mm center bore: 40 mm rotation movement: 360 ° reading accuracy of turning index: +/-4 ° swivel movement: 90 ° power capacity: kW weight of the machine ca.: 0,31 t dimensions: 850x450x360 mm • new-valued, manual operated, swivelling rotary indexing table, • H4 = indicating system for circular movements 0 - 360 ø +/- 4 above optic, • S20 = indicating system for swivelling movements 0 - 90 ø +/- 20 above scale ring, • B = manual operation for 0 - 360 ø, • B = manual operation for 0 - 90 ø, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 710; Engine: Mitsubishi S4L2-Z5T61SD; Accessories: Tanker, Battery, Control Panel, Stahldach, Emissieklasse: Stage 5, Emission class: Stage V; Water Tank Volume [l]: 140

The compact S4000 in-line sealing machine ensures efficiency and productivity by adapting to all production line configurations. Manufacturer: MECAPLASTIC - Type: S4000 - Automatic  - Used machine The (+): - Sealing machine, ease of use. - Quick tooling change. - Ergonomics of use. - Complete cleansing.

Engine Brand: MITSUBISHI, Conditie: CORE, Engine Color: Black , Engine Condition: Core , , https://www.hamofa.com/catalog/product/view/id/219472, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: S4L D-F

Motor power 18,5kW Air capacity approx. 12,500m³/h Pressing 3500PA Good condition

COMPART S44.004 die cutting press was manufactured in 1995 in Germany. This production-oriented machine is mainly designed for fast and accurate cutting in various types of soft non-metallic materials but it can also be used as an extruder. Materials taken from rolls or sheets are machined by a cutting head moving along a horizontal beam. This solution allows the cutting plane to be extended to allow the operator to position the die and to insert or remove cut material. The COMPART die cutting press is offered with a screw compressor and an air tank with a capacity of 400 litres. The machine has so far been used for the production of polyethylene-based foam parts. The S44.004 cutting machine weighs 2700 kg. Technical specifications of the COMPART S44.004 die cutting press - maximum cutting force: 25 t (250 kN) - cutting speed: approx. 85 mm/s - stroke adjustment range: 15-120 mm - ...

Scanvaegt 4700 Grading and Batching Machine: Used Scanvaegt 4700 Grading and Batching Machine. Photos and Video available. Machine can be seen in operation. Application: sorts food products for size and weight 12 gate sorting sections + 4 automatic gates for batch or boxes Capacity: up to 180 pieces per minute 12 baskets (one side) Left to Right This grader of the CheckBin type is designed for high-precision weight grading. The reliable machine is able to provide intelligent batching to produce batches of accurate pre-set weight for packing on the next stage. Capacity: up to 180 pcs per minute Products: poultry, fish and meat Weighing precision: +/- 1 g Fault percentage: less than 1% of batch weight Max. batch size: 10 liters Construction: stainless steel IP67 Infeed conveyor- Goose neck type: 4300 mm Scale grader Takeaway conveyer Video available,  ...

Heavy high-performance planer designed for maximum feed performance and productivity. Designed for rough use in planing and sawmills. Suitable for the processing of planed goods and slats. Special features: Left version. for wood widths up to 360 mm. Machine we sell as used. But the machine never ran. Electrical part still has to be built by Ledinek - here adjustments are possible (axe positioning, FU-s, 400V or 480V etc.). Price is for the variant in the PDF description. Adjustments on request. Drive motors available.

Technical data Table length: 1250 mm Table width: 240 mm Number of T-channels: 3 T-channel width: 14H7 mm Distance of the T-slots: 80 mm Clamping surface Length: 1250 mm Width: 240 mm Grinding length: 1200 mm Grinding width: 370 mm Execution: with automatic cycle Max. distance from table to spindle-centreline: 130 - 600 mm Longitudinal travel (X-axis): 1330 mm Transversal travel (y axis): 270 mm Table speeds: stepless from: 3 m/min up to: 30 m/min Diameter of grinding wheel: 300 mm Width of the grinding wheel: 50 mm Wheel int. diameter: 127 mm Grinding wheel speeds: up to: 2180 rpm Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 4000 kg Overall dimensions machine: Length: 3700 mm Width: 1750 mm Height: 2450 mm Dimensions electric cabinet: Length: 1750 mm Width: 500 mm Height: 2000 mm Various accessories: Magnetic plate: Length: 700 mm Width: 200 mm Crushing profiling device Too ...

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

CNC external cylindrical grinding machine, brand Studer, type S40-4, Bi 1987, Documents are available. The price is net

Welding frame format: 550x410mm, packing dimensions welding/ shrinking: 530x390x200/ 500x360x200mm, film width: 200-500mm, roll diameter: 260mm, connected load: 2.6kW.

Compressed air connection: 6bar, connected load: 6.6kVA, weight: 450kg, with magnetic cylinder, chrome anilox roller, UV dryer, blower, suction unit and cliché bending device.

Description Three-phase suction unit with receiver Aspratore Moretto: V1 S40 Voltage: 400 V Power: 1.1 kW Production: 180 Kg/h Container: Moretto C10 F40 Capacity: 10 L

grinding diameter:400 mm grinding length:650 mm centre height:125 mm total power requirement:5/8,25 kW weight of the machine ca.:3,4/3,5 t

pressure: 40 t throat: 320 mm stroke: 250 mm arm length: 320 mm table surface area: 1400x600 mm ram surface: 1200x600 mm dayligth: 650 mm total power requirement: 22 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3200x3300x3300 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ABB Robotics IRB 1400 S4C + M2000 robot with Fronius Transsynergic 4000 welding machine and TC 1000 cleaner Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of construction: 2004 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams Floppy disk drive for data backup, Fronius Transsynergic 4000 pulse welding machine, Fronius robot hose package

ABB Robotics IRB 1400 S4C + M2000 robot with turntable and Fronius TPS 3200 as well as Fronius torch cleaner Number of axes: 6 Max. payload: 5 kg Max. working range: 1450 mm Year of construction: 2003 Scope of delivery: robot, controller, cable, teach panel, circuit diagrams Floppy disk drive for data backup, Fronius TPS 3200 pulse welding machine, rotary table, Fronius robot hose package

Ref. -No.: 10374 Manufacturer: MONFORTS Year of construction: 2000 Type of control: Zyklen gesteuert Control: MONFORTS Control Storage location: Halberstadt Country of origin: Germany

Manufacturer: Joos, Type: S4R/P 2200 FB, Year: 2018, 4 roller machine: yes, Work piece width min-max mm: 2200, Year :2018

Gear motor, electric motor, electric gear motor -Speed: 136 rpm -Power: 0.37 kW -Construction: B3 angle -Wave output: 2 -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 440/230/H220 mm -Weight: 21 kg

Servo motor, geared motor, electric motor, three-phase motor -Manufacturer: KUKA, servo motor type 1FK6100-8AF91-1ZZ9-Z S49 from robot KR125/3 KR125L90/3 -Voltage: 156V -Power: 3.77 kW -Speed: 3000/4200 rpm -Shaft: Ø 32 x 75 mm -Number: 8x motor available -Price per piece -Dimensions: 320/199/H230 mm -Weight: 23 kg/pc.

Servo motor, geared motor, electric motor, three-phase motor -Manufacturer: KUKA, servo motor type 1FK6081-6AF71-1ZZ9-Z S47 from robot KR125/3 KR125L90/3 -Voltage: 168V -Power: 2.83kW -Speed: 3000/3950 rpm -Shaft: Ø 25 x 55 mm -Number: 9x motor available -Price per piece -Dimensions: 300/155/H185 mm -Weight: 16 kg/pc.

Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 390/200/H200 mm -Weight: 21 kg/piece

Gear motor, electric motor, electric gear motor -Speed: 54 rpm -Power: 0.25 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 380/240/H155 mm -Weight: 17 kg/piece

Gear motor, electric motor -Gearbox: with separation -Type: P80 -Code: 4/2-FY24-270° -II -Input: 1 turn -Output: 0.5 turn plus 0.5 turn stop -Speed: 62 rpm -Power: 0.37 kW -Construction: B14 -Diameter shaft: Ø 25 mm -Protection class: IP 55 -Dimensions: 540/370/H235 mm -Weight: 41 kg

adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gear units SEW type: S40 -Manufacturer motor SEW type: DFT71C2BAZ -Motor power: 0.37 kW -Speed range: 41-205 rpm -Motor: adjustable -Drive shaft: Ø 25 mm -Construction: B3 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 560/180/H275 mm -Weight: 30 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 550/290/H276 mm -Weight: 17 kg

Sondex Heat Exchanger S44A-IG16 Plate heat exchanger from 2018, like new, complete (closed model), 1 available. 232 KW, 25 L, 10 bar Manufacturer: Sondex Model No.: S44A-IG16 Type: Plate Heat Exchanger Serial number: SD 32444 Capacity [L]: 25 Pressure [bar]: 10 Year of construction: 2018 Weight [kg]: 410

weight max. in kg: 2x 6000 kg baseplate diameter: 980 mm max. torque at clamping center: 13000 Nm : n x 360 ° : 0,10 - 1,4 U/min : 30 mm : 930 ( 1170 ) mm : 2000 - 6000 mm dimensions: 9000 x 1500 x 2030 mm SEVERT double column rotary positioner Electrical data Power requirement approx. 4 kW Connection value approx. 5 kVA Current consumption approx. 12 A. Pre-fuses approx. 16 A Connection to plug XS01 on the control cabinet - Operating instructions available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Telescopic covers for X and Z axes for many Studer CNC grinding machines S21, S31, S33, S40 etc. And for many other machine manufacturers on request.

Fire water tank, rainwater tank, underground Double-walled steel tank with a volume of 50,000 L Dimensions: Ø 2.50 m × 11 m long

Saw blade Diameter 350 mm Projection 77 mm Projection 45° 54 mm Clamp opening 84 mm Cutting size 4210x5140 mm

ABB Robotics IRB 1400 robot complete Control: S4C-M98 Max. working radius: approx. 1450 mm Load capacity: 5 kg Year of construction: 1998 Scope of delivery: robot, controller, cable, teachpanel, operating instructions, circuit diagrams 2 weeks start-up warranty. No further warranty in addition, spare parts are always available from stock. The robot is fully functional and can be visited. Free loading - ex works The stated net price is exclusive of the statutory 19% VAT.

ABB Robotics Robot IRB 2400/16 S4C M98 Control: S4C M98 Number of axles: 6 Max. load capacity: 16 kg Max. working area: 1550 mm Year of construction: 2000 Scope of delivery : Robot, Controller, Cable, Teachpanel, Circuit diagrams 2 weeks start-up guarantee. No further warranty. In addition, spare parts are always available from stock. Robot is fully functional and can be visited. The indicated retail price is exclusive of the statutory VAT of 19%.

Engine Brand: MITSUBISHI, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Working Hours: 1950 Hour(s), Engine Condition: Used , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 29.9 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219477, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: S4S-61SG; Transport weight [kg]: 200