roof used for sale

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5  ...

Roof window shutters, blinds, roller shutter curtains -Number: 1x roof window roller shutter available -Price: per piece -External dimensions: 1700/480/H180 mm -Net weight: 19.3 kg/piece

achkettenquerförderer or Auschutisch with pull-off cross conveyor. Chains with roof chain takers. 5 chain strands. Length 5,900 mm. Spread width 2,000 mm. Total width 2,400 mm. Chain spacing: 750 - 750 - 1250 - 2000 mm. Fully plated. Drive via gear motor with 3 KW and adjustable slip clutch. Sprockets with clamping elements. Chain 80 x 40 x 6 mm. Technically reviewed and tested. Trial run possible.

Roof centrifugal fan, centrifugal fan, centrifugal blower, centrifugal fan HÜRNER D16-RU250-15e V:. 600 m3/h n max: 1500 rpm Input: Ø 215 mm Output: Ø 240 mm Motor : eKDF 71 B-4 F4 0,0,37 kW 1400 rpm 380 V 3AC IP44 explosion-proof used, tested ! Dimensions: 700 x 650 x 750 mm

roof fan, axial fan, axial blower, axial fan, supply air mode, horizontal suction S&P, SOLER & PALAU HCTT/4-500A Product no.: 5113441900 Fan diameter diameter: Ø 500 mm motor: 0,, 85 / 0.5 kW 1350 / 1060 rpm 400 V 3AC 50 Hz IP65 thermoplastic impeller, glass-fibre reinforced plastic hood made of aluminium, seawater-resistant, Ø 900 mm base plate and channel box made of sheet steel, galvanised channel box: 690 x 690 x 310 mm, flange: 875 x 875 mm approx. 3.5 m connection cable with 5-pin CEE plug used, tested ! Dimensions: 900 x 900 x 680 mm

Roof fan, vertical, explosion-proof HELIOS VDD 250/4 Ex Item: 07265 / 00 Volume: max. 1280 m3/h 0,12 kW 1400 rpm 400 V 3AC 50 Hz IP45 Fan wheel diameter: Ø 250 mm Flange: 575 x 575 mm Intake opening: Ø 180 mm Output: 350 x 350 mm Control and terminal box type A21-E1-01106 200119 New ! with documents ! Dimensions: 680 x 580 x 320 mm

Fan, fan, electric motor, blower, centrifugal roof fan, emergency ventilation fan, flue gas fan -Speed 1420/1260 rpm -Line 0.13/0.09 kW -Dimensions 670/670/H445 mm -Weight 24 kg

Fan, fan, electric motor, blower, centrifugal roof fan, emergency exhaust fan, flue gas fan -Speed: 2870-3300 rpm -Power: 0.66/5.0 kW -Volume flow: 14,000/28,500 m3/h -Soundproof -External diameter: 1475 mm -Number: 2x fans available -Price per piece -Dimensions mounting flange: 1160 x 1160 mm -Height: 1310mm -Weight: 412 kg

Screws, washers, stainless steel screws, VA screws, wood screws, hanger screws, solar fasteners, end clamp -Solar fasteners: roof hooks, -Dimensions: see photos -Quantity: 66 hooks available -Price per piece -Minimum order: 10 pieces. -Transport dimensions: 240/130/30 mm -Weight: 0.4 kg/pc.

Thermofin roof condenser, type: TCH 100.1-15-E-N(D5), number: 701849-100-0001, year of construction: 09/2006, 5 fans, dimensions: 9950 mm x 1630 mm x 1500 mm.

new parts in original packaging

Roofing nails PASLODE 3.1 x 19 mm (3.0 x 19 mm) No. 00X7015 19,000 pcs (2 boxes) wire magazines New ! Dimensions: 510 x 450 x 320 mm

Roofing nails PASLODE 3.1 x 25 mm (3.0 x 25 mm) No. 00X7017 18,000 pcs (2 boxes) wire magazines New ! Dimensions: 460 x 500 x 300 mm

Rollforming line, for producing trapezoidal metallic pannels T8

Standing seam metal roof machine F3 Standing seam metal roof machine F3 with length measuring device was designed by our company to produce standing seam roofing panels for the installation of roofs and facades of various buildings and structures. Sheet metal blanks are passed through the forming rolls of the machine to get the desired shape of the standing seam panel. This method of production allows you to produce panels with a speed of about 10 meters per minute and fit any roofing companies. The machine is equipped with an easy width adjustment system, so it takes just a few minutes to readjust it from rolling one width to another. The F3 machine can work with panels from 200 to 700 mm wide. It is possible to work with metal sheets and coils made of galvanized steel, copper, zinc, aluminum, stainless steel, etc. Maximum metal thickness for work – 0.8 mm. Standing s ...

Individually produced vacuum machines (2 pcs.) for the production of roof boxes, but also suitable for the production of other products within the dimensions below. Its maintenance is simple and its cost is very low. In addition to the two vacuum machines, the price also includes the tools required for the production of the roof box (4 types), TÜV Nord certificate, and training in the production process if necessary. Small vacuum machine: 2 pcs. sheet trays 2260 x 1060 mm (for the bottom and roof). The temperature can be adjusted per cycle. The horizontal movement of the furnace is solved pneumatically. The vertical movement of the table works pneumatically and its height is 380 mm. The vacuum capacity of the vacuum machine is 130 m3/hour. It is suitable for the production of 5 pcs of roof boxes per hour (bottom + roof). Big vacuum machine: 2 pcs. sheet trays 2380 x 1180  ...

It is a thermally insulated lightweight hall (built in 2008), whose hot-dip galvanized supporting structure and sandwich cladding together with various equipment can be reused. DIMENSIONS according to construction documents: Covered area: 375.00 square meters; Width of the hall: 25.00 m AK wall; Length of the hall: 15.00 m AK wall; Frame spacing: 5.00 m MM frame supports; Eaves height: 5.24 m at the intersection of roof and wall; Ridge height: 7.30 m building height; Purlin spacing: 2.50 m floor area / 2.54 m roof pitch; Wall beam spacing: 2.50 m; Roof pitch: 10 degrees, symmetrical gable roof; LOAD ASSUMPTIONS: Wind load: 0.59 kN/m2 (DIN 1055-4 March 2005). Snow load: 1.25 kN/m2 (DIN 1055-5 July 2005). Seismic zone: 3 (DIN 4149-4 April 2005). STRUCTURE: The primary structure consists of hot-rolled and hot-dip galvanized IPE solid profiles. Main f ...

2 warehouses, gable roof, 280m2 and 72m2 - used -: Hall 1 (280m2) = 25.000.-€ (net), dismantled, packed and loaded! Hall 2 (72m2) = 10.000.-€ (net), dismantled, packed and loaded! Condition: good – very good Available from June 2024 Location: 50374 Erftstadt Hall 1: Manufacturer: Tepe Type: SD 10.08m, multi-purpose hall in steel structure Year of construction: 2007 Metrics: Width: 10.08m Length: 8 fields à 3.50m = 28m Eaves height: 4.55m Ridge height: 5.05m Lateral interior height: 4m Frame spacing: 3.50m Snow load: 0.85 kNm2 Wind Load: Zone 2 Inland Building materials: Softwood of sorting class S10/MS10 Concrete C25/30, reinforcing steel BSt 500 Hollow sections S235JRG DIN EN 10025 Structural steel S 235JRG DIN EN 10025 Trapezoidal steel sheets StE 320-37. Dowels according to letter of approval Screws 5.6 Pitched roof with a low roof pitch of 6  ...

Hot-dip galvanized steel hall [hL53.6m x hW15.6m x dH6.5m / fH7.6m] dismantled from stock. HALL STRUCTURE: the hot-dip galvanized primary structure consists of 9 main frames (IPE 450 frame columns, IPE 300 frame trusses) as well as 2 lightweight end wall constructions (HEA 140 corner supports, HEA 160 internal supports, HEA 120 gable wall transoms) of steel grade S 235 JRG2 (St 37), and the secondary structure consists of hot-dip galvanized lightweight profiles, i.e. roof purlins such as eaves purlins made of Sigma profile SE250/100/30/15/2.5 mm and C-profile wall beams C+150/90/43/15/3 mm of steel grade S355 JRG3 (Lv. 52). The bracing consists of pressure pipe diameter 70 x 2.6 mm as well as roof and wall diagonals made of round steel (diameter 16 mm). ROOF: Hösch Isorock Integral D 115 MW roof panels, component width 1000 mm, sheet thickness 0.50 mm inside and outside (core thickn ...

Dynajet roof cleaner for quick and thorough roof cleaning. Net price: € 2.933,00. Ideal for cleaning concrete roof tiles and tiled roofs. Fully equipped with brush, pressure gauge, 2/2 way ball valve for high pressure on/off, wheel spacing and height adjustable to roof profile, nozzle beam for 2 identical nozzles (form D). Connection: M22 x 1.5 AG or M24 x 1.5 AG 500 mm diameter. Please order the nozzles, sealing and support rings separately (not included). Attention: 2 identical nozzles are always required. Nozzle selection: Machine type Designation Form 15° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500me + 500mg + 500md 1.15 D for 500th + 500me-30 1.3D 30° beam angle for 280me + 350th 0.95 D for 350me + 350mg + 350md 1.1 D for 500th + 500me-30 1.3D General technical data Maximum pressure 500 bar Connection type (input) M22x1,5 AG  ...

Apple pomace drying as a precursor for pectin production at albi Berghülen Capacity: up to 1.5 tons of pomace per hour, built in 1977 and 1992 Manufacturer: Kunz AG, Dintikon CH Function The apple coming from the winery became damp pomace with a transport screw into a pomace transport system open at the top transported diagonally upwards, and then via a further transport screw, D= 600 mm in the all-round running round drying chamber, D = 360 mm, L = 11,400 mm. With an internally welded bucket in the drying chamber, the still damp pomace moves intensively with the hot air. At the same time, a gas burner flame and the furnace blow the hot gases into the drying chamber. Length burner and oven together: 6,500 mm The pomace waste, which is dried and crushed at the same time, is processed by an ejection chamber located directly at the end of the drying chamber with a t ...

GeneralUniversal Milling Machine; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)30 kWDrive power (40% DC)46 kWSpeed range20 - 15000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sy ...

GeneralUniversal Milling Machine Stealth Design; Control: CELOS with Siemens Sinumerik ONE Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minIntegrated motor spindle speedMASTER®Drive power (100% DC) 25 kWDrive power (40% DC) 35 kWTorque (100% DC) 86 NmTorque (40% DC) 130 NmSpeed range - 20000 rpmSpindle taper HSK-A 63 DIN 69893Clamping System HSK-A 63NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformationClamping pneumatic, two circuitsClamping pneumatics, 2 clamping circuits for standard machineTool clamping for HSK-A63Tool clamping HSK-A63 accordi ...

It is a used but durable hall construction which could also serve as a ball sports / football hall, equestrian sports hall and much more in the future. The steel frames are self-supporting and have a height of almost 11 meters in the ridge (in the middle). APPROXIMATE DIMENSIONS: Floor area: 2560 sqm built-up BG area; | Hall length: 65.50 m AK wall + boiler room; | Hall width: 39.09 m AK wall planking; | Eaves Height: 4.27m UK Roofing; | First - Height: 10.70 m OK Roofing; | Roof pitch: 18.75 degrees sym. gable roof; | STRUCTURE: Solid, articulated steel frame construction, with steel frames made of rolled sections mounted on point foundations or rails. The end frames or gable wall constructions are made of rolled profiles. Purlin line made of hot-rolled roof purlins. The 2 middle hall segments stand on rails so that the hall can be opened in good weather. FA ...

weight max. in kg: 2000 kg stroke: 6510 mm fork length: 950 mm : 2834 mm Number of working hours: ca. 600 h weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,65 x 1,3 x 2,85 m Diesel forklift - Diesel particulate filter - Sideshift - Fork adjustment - Triplex lifting mast - Drivers protection roof - Roof window including roof wiper system - many more additional options - MINT CONDITION The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Diesel forklift - Diesel particulate filter - Triplex lifting mast - Sideshift - Fork adjustment - Driver's protection roof - Roof window including roof wiper system - many more additional options - New condition Load capacity in kg 2000 kg Stroke 6510 mm Fork length 950 mm Height 2834 mm Operating hours approx. 600 h Machine weight approx. 4.2 t Space requirement approx. 2.65 x 1.3 x 2.85 m Approx. Onsite Dimension. (l x w x h): 2,650 x 1,300 x 2,850 mm, weight approx.: 4,200 kg

1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to absorb the technology and the Enclosure of the approximately 7 m high powders Loading technology with flow vessel and powder delivery Technology through a Safeline metal detector in the truck filler neck. with rope glide staircase to reach Floor 1 and Floor 2 with complete steel construction for Wall and roof construction 1 truck powder silo tank loading with 2 separate powder loading points and own scaffolding construction to accommodate the technology and the Enclosure of the approximately 7 m high powder Loading technology with feed vessel and powder dispenser Technology through a safeline metal detector in the truck filler neck. with a stairway to reach it Floor 1 and Floor 2 with entire steel construction for Wall and roof construction

Double standing seam roofing machine F3 is used for making double standing seam lock for the roofing panels that are used for installation of the double standing seam roofing. The double standing seam roofing is widely used because it’s impossible for the water to get under the closed double standing roofing panels in the places of their contact with each other, thanks to lock’s special shape. The special shape means that double standing seam panels cover each other in the places of their contact, and after their installation on the roof it will be closed using special double standing seam closing tools (manual tool for closing double standing seam lock and electric machine for closing double standing seam lock). The advantage of this Standing seam machine is possibility to change the width of the standing seam roofing panels in very simple way. There’s a special screw at th ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 in good condition, cleaned and checked Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precis ...

For sale is a hot-dip galvanized primary construction of a hall structure (hL24m x hW17m x dH4.6m) from an unrealized construction project. The roof purlins and wall beams which were planned as a secondary construction are not part of the offer. System length: 24.00 m; System width: 17.00 m wingspan; eaves height: 4.60 m; ridge height: 6.85 m; roof pitch: 15 degrees; PRICE: on written request with complete company / contact details.

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1990 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut Roller conve ...

RANDEK SP700 Cross-cut saw Production: Randek, Sweden Year of construction: 1989 SN 1989-02-08 in good condition Randek's SP700 series is a reliable saw designed for manufacturers of roof trusses. Manufacturer of roof trusses and houses all over the world. The SP700 saw is effective, easy to use and accurate. She has been on the market for a long time. has been on the market for a long time and is constantly in close contact with our customers many customers. The saw blade of this semi-automatic saw supports oblique cuts, that is, it can make all the cuts you need. The large saw blade diameter (700 mm) also allows you to make several sections of woodpiles to cut at the same time. - Bevel cuts from 0° to 360° - Cutting heights up to 250 mm, three boards can be cut per cutting cycle - PLC programmable saw - Fixation of the wood near the cutting area for a precise cut  ...

workpiece weight: 100 - 3.000 kg workpiece length: 5.000 mm diameter: 1.260 - 1.600 mm Control: CAP920 total power requirement: 11 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 20 Container m Mobile balancing system SCHENCK for use anywhere in the world The balancing system is permanently installed in a 20 open-top container. The container is equipped with everything you need for balancing • Lighting • Metal base plate 12,000 kg as a base plate for accuracy • Compressor for working air supply distributed in the container • Compressed air connections. • A circumferential power strip • A tool cabinet equipped with tools • A hydraulic lifting device for aligning the container from the outside • In addition to a tarpaulin for the roof, the container also comes with movable roof segments made of sheet metal. • The container has a central plug through whic ...

P311 - used approx. 110 m³ / 110,000 L GF-UP tank, standing on stand frame or horizontal, with chemical protective layer. Technical details: Capacity: approx. 110 m³ / 110,000 litres Material: glass fibre reinforced plastic, GF-UP Manafacture: Reich-Tank Year of construction: 2005 DIBT bauaufsichtl. Approval: Z-40-11-117 Specific gravity: min. 1.06 kg/L Dimensions: Ø approx. 3.00 m × H total approx. 19.05 m Other: Used tank made of glass fibre reinforced plastic / GF-UP, with inner chemical protective layer, professionally cleaned and in good condition. Standing, above-ground storage container on stand frame, incl. ladder and roof platform, dome on the side of the tank and on top of the roof, several inlets and outlets. Former silo for the storage of biogas and 9% sulphuric acid, including container statics and expert opinion to prove suitability according to §19 g/h WH ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmTechnical DataType of main driveAC Drive power (100% DC)16 kWDrive power (40% DC)21 kWSpeed range20 - 15000 rpmSpindle taperSK40 Tool holder DIN ISO 7388-1-A Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgDirect measuring systemDirect path measuring systemSpindle speed 15,000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 21 kW / 16 kW (28 hp / 21.5 hp) Torque 111 Nm / 85 Nm (82 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 ...

20-15- Timber drying kiln (new) Type CSD-HT-BR 70 Internal dimensions (width x depth x height) 7500 x 7160 x 4100 mm External dimensions (width x depth x height) 8080 x 7760 x 5500 mm The section of the structural columns of the chamber is 160 x 70 mm Snow load for the roof is 80 Kg/m2 Wind resistance of walls 27.8 m/sec Warming with glass wool Walls ǂ100mm Roof ǂ100mm Door ǂ100mm Door: sliding type, hung on a rail Wood for drying: various Loading the drying chamber with a forklift The heating system is gas Fuel - GPL gas Maximum thermal energy (300 kW) Maximum chamber temperature 75 °C The number of fans in the chamber is 5x3kw The total capacity of the fans is 162,500 m3/hour Number of probes: 4 HT/ 8 AWM/ 2 EMC/ 2 Temperature Voltage 400 V 50 Hz Total power 17kw)

TRUMPF TruLaser 3030 fiber laser built in Germany in 2013, is used for precision machining of workpieces made of structural steel, stainless steel, as well as brass and copper, thanks to special technology data packages equipped in the machine. The extremely efficient and reliable fibre-cutting technology expands the machining possibilities and allows to achieve very smooth and even edges. The laser cutting machine features a robust, durable design that prevents any vibrations from occurring during changes in direction. The enclosed laser body with lift-up roof and fixed guards effectively protect the operator during work. The axes are driven by a direct Torque drive (X-axis) and direct linear drives (Y-axis and Z-axis), which, combined with hardened guideways of the highest manufacture precision, ensure that high accelerations and working speeds are achieved. Generated by the reli ...

CNC-controlled erosion machine for the processing (erosion, grinding, polishing) of PCD tipped tools up to 400 mm diameter and 400 mm length, according to disc-electrical-erosion processes for use in service and in production., Accessories:, Total enclosure,, Software path management,, Software end mill (207/208),, Software disc-shaped workpieces on the front side (221/222/223/224),, Software profiled workpieces (233/234/239/240),, Software hogger, hogger profiled (255/256/257/258/260/261/262/263), Software for disc-shaped workpieces (264/265),, Software for end and joint milling cutters (267/268/277/278),, Software step tools (271),, Software scoring saws (299),, Software saws flat tooth (301), Software saws one sided with bevel (302/303),, Software saws alternating teeth (304),, Software saws trapezoid trapezoid tooth (309),, Software saws flat roof tooth (310),, Software saws flat-tra ...

GeneralUniversal Milling Machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal650 mmCross520 mmVertical475 mmFloor space/WeightDimensions (L x W x H)2,85 x 2,35 x 2,75 mWeight approx.7500 KgTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-20000 rpmSpindle taperHSK-63A DIN 69893 Clamping SystemDIN ISO 7388-3-A, AD Feed rate longitudinal/transverse/vertical-42000/-42000/-42000 mm/minRapid traverse longitudinal/transverse/vertical42/42/42 m/minDirect measuring systemDirect path measuring systemSpindle speed 20.000 rpmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 20,000 min-1 Output 35 kW / 25 kW (47 hp / 33 hp) Torque 130 Nm / 86 Nm (96 ft lbs / 63 ft lbs) (40 / 100 % duty cycle)NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 630 x 500mm / 24.8 x 19.6 in swivel ra ...

Nicotra Gebhardt ZDS 20-0071 Pedestal Silencer Pedestal silencer for inlet side sound attenuation of roof fans Manufacturer: Nicotra Gebhardt Type: ZDS 20-0071 Pedestal silencer Flat roof plinth galvanized steel sheet More items - new and used - can be found in our shop! International shipping costs on request!.

GeneralUniversal milling machine, with compound Guideway construction; Control: CELOS with Siemens 840D sl Operate Working area 1Cross450 mmLongitudinal500 mmVertical400 mmTechnical DataType of main driveAC Drive power (100% DC)25 kWDrive power (40% DC)35 kWSpeed range20-18000 rpmSpindle taperHSK-A 63 Clamping SystemHSK-A 63 Feed rate longitudinal/transverse/vertical-30000/-30000/-30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/minFloor space/WeightDimensions (L x W x H)4,15 x 3,98 x 2,75 mWeight approx.4500 KgSwivel Rotary Table, simultaneousSwivel Rotary Table for simultaneous machining swivel range -5 to +110°, rotary axis 360° including direct measuring system for B- and C-axis and working plane transformation Not available with NC-Divider EA 410!Table surface 630 x 500 mmDistance between T-Slots 63 mmNumber of Slots 7Slot width 14 mmMaximum load (table centre ...

Covered racking complex consisting of cantilever racks and heavy-duty racks for Euro pallets in the outdoor area. On the outside, the roof protrudes, so that there are further protected storage spaces. Everything is completely removable and rebuildable. Data: Width approx. 11.20 m Depth approx. 13.27 / outside 13.80 Height approx. 5.77 to 6.85 m Roof area approx. 15.50 m x 15.0 m The cantilever racks have 13 / 14 supports with beams variable in height / depth 1m / up to 6 levels in total. The pallet racks in the middle and outside have a total of 4 units with space for 2 Euro pallets each side by side / four levels. The price is negotiable, especially if the buyer takes care of the mining.

The machine is in good technical condition, after agreement the possibility of testing. Machine parameters: Feed in the X axis 1600 mm Feed in the Y axis 800 mm Feed in the Z axis 900 mm Angle of rotation +/- 105 ° Maximum speed 12000 rpm Number of tools in the magazine: 24 Dimensions of the work table: 2000 x 850 mm. It is designed for customers where it requires a vertical spindle as well as high speed and is the perfect solution with all the benefits it provides: - High speed range and high torque - High position dynamics and high acceleration in the axes - Limited working space: maximum comfort and safety - Vertical protection up to the roof in the X axis: optimizes the removal of chips and coolant - The upper cover of the working area with the roof allows access by a bridge crane - Tool change and tool change arm in the working area. The machine accessories include a wall dividing  ...

We offer: Chiller Air-cooled chiller Climaserv GFC-F 260 ST 260 kW Cooling capacity in container outdoor standing on the roof The machine was used to cool the liquid circuit of the waste heat generated in the wallpaper production plant during the printing process. The system comes from a vinyl structure wallpaper manufacturer. The buyer is responsible for the dismantling, loading and transport from the specified location in the hall of the purchased machine. Costs: approx. 2500 € net.. Offer is outdated. Specifications Basic: Manufacturer: Geoclima S.r.l. Type: Climaserv GFC-F 260 ST Type of installation: Container on roof in the open air Series: CS 9010 Year of construction: 06/1999 Power consumption:101,5kW Rated Current:162.5A Starting Current:301A Max.Operating Current:225.5A Operating Current: 400V/50Hz/3~/PE Control current: 230-24V/50Hz/1~/PE Metric ...

Steel silo volume 25 m3, payload 40 to, net weight approx. 2,500 kg, outlet height 1,300 mm, outlet flap NW 250, 1 injection line, 1 vent line, 1 manhole lid NW 500 in cylinder, 1 manhole lid in the silo roof

Mini-silo type CB 1000, volume 1 m3, payload approx. 1,600 kg, net weight approx. 290 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eye and forklift holder

Cat. No. 11-1040 New For liquid with a density of 1350 kg/m3 Material: V2A - AISI 304, 1.4301 Surface: Ground Upper and underbody: Klöpperboden Cylinder body: with flange DN 100 with sight glass with rupsing disc with CIP line with spray head through. 90 mm made of V4A with cable for spunding machine DIN 40 with side manhole 509 x 372 mm with low-screw shut-off valve for residual and clear drain with digital thermometer with residual drain line through m. 2"1/2 with ladder bracket with transport eyelets height-adjustable with 4 calotte feet Technical data Dimensions (mm) Total height inside: 1592 mm Dia. inside: approx. 4600 mm Total height outside: 4605 mm Dia. outside: --- Roof 426 mm height 3.0 mm thickness Cylinder 3000 mm height 2.5 mm thickness Underbody 426 mm height 3.0 mm thickness Feet 600 mm hei ...

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...

Steel silo type CB 3000, volume 3 m3, payload approx. 4.8 tons, net weight approx. 700 kg, outlet height 1,000 mm, outlet flap NW 250, 1 injection line, 1 vent pipe, 1 manhole lid NW 500 in the roof, 1 manhole lid NW 500 in cylinder, 1 riser ladder, 1 stand platform, forklift sphotos and crane eyelets.

Mini-silo type Piccolo 1.2, volume 1.2 m3, payload approx. 1,600 kg, net weight approx. 300 kg, outlet height 1,100 mm, outlet flap NW 250, 1 manhole lid NW 500 in silo roof, crane eyelets and forklift holder