roda used for sale

3 connecting rods, Ø 35 mm, total dimensions: (3x) 400 mm x 200 mm x 150 mm.

Rodolfo Comerio 5 roll 'L' calender, Year: 1981, Peripherally drilled hard chrome plated rolls 650mm dia x 2400mm wide (2 spares), High pressure hot water heating (28 bar), Roller bearings, Motorised nip adjustment, Roll bending on rolls 2,4 and 5, Cross axis on rolls 1 and 4, With Farrel Pomini full unidrive gearbox (choiceable 2 speed 30m/min or 60m/min), dc variable speed motor to each roll 88.2kW to rolls 1,3,4 + 5, 110kW to roll 2?. Motors not included. Previously used for rigid PVC film 2000mm finished width, 100micron - 1100micron. Calender max speed 60m/min. Post calender equipment:- 7 x Take off rolls? 150mm dia x 2200mm wide (3 groups), Hydraulic embossing station 300mm dia x 2200mm wide (rubber roll driven, emboss roller free running against rubber roller), 12 x cooling drums (4 groups) 180mm dia x 2200mm. Beta thickness gauge (not available) Berstorff edge ...

Verdriessen parent! Compensation module for Schaltschrnk (control panels available, sep. ask) with electronic circuit! each module 3 x 225 kvar compensation performance! Capacitors Fab Rodensteiner 12 modules available - a ´ module 440.-information at 0170 / 2204056 Mail to fa.raupp@t-online.de

1 x Rodolfo Comerio 2200mm wide x 700mm dia two roll mill, Year of manufacture: 1981, motorised nip adjustment, Rollers bearings, Direct drive gearbox (no bullgear) With 138Kw DC variable speed motor and controls Stip knives to back roll?. In very good condition.

This Roders RFM 760/2 Vertical Machining Center was manufactured in the year 2001. The machine has a spindle speed of 42000 rpm.

Roders RXP600 DSH Precision High Speed ​​CNC Milling Center Machining range for horizontal table position: X 500 mm, Y 855 mm, Z 400 mm Distance from spindle nose to table: 515 mm Tool magazine: 28 positions Overall dimensions in transport position: W 2300 × D 2800 × H 2920 mm. Total weight: 10200kg. Spindle Model: FISCHER HSC 40 - high-frequency milling, vector-controlled spindle, FISCHER (Germany) Power: 14 kW, 3000-42.000 rpm Tool holder HSK 40: Maximum tool diameter: 16 mm. Desktop Swivel rotary table with thrust bearings for highest rigidity and accuracy, integrated in the X-axis. A-axis tilt range: +/- 115 degrees. C-axis tilt range: +/- 360 deg. Workpiece weight: 200 kg. T-slot table size 340 × 340mm (ø400) Groove width: 12mm. Distance between grooves: 45 mm. Linear motors: all axes Cooling of the main a ...

General SKUR0276 LocationBarneveld MakeRodenbach Apparatebau GmbH TypeFeeding Silo Year of construction2012 Pressure Working pressure0.32 Bar Main Features MaterialStainless steel Volume8504 Ltr. Pressure0.32 Bar Specified Features - Silo MaterialStainless steel Silocheck Closedcheck Capacity8504 Ltr. Sizesdia. 2000x3900mm Diameter2000mm Cylindrical height2000mm Conical height1900mm Conical bottomcheck Flat topcheck Manhole490x490mm Inletdia. 180mm Outletdia. 200mm Information Floorspace2,2x2,2 M CEcheck Total height4,1 M Weight800 Kg Extra Specificationsinspection hatch in the cone dia 220mm SilosRodenbachTanks > SilosBrand > Rodenbach What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

roll diameter: 700 mm roll length: 2200 mm rolls drilled: Kernbohrung Nip adjustment: hyraulisch 0 total power requirement: 160 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dodge 1946 Rat Rod Discover the allure of the extraordinary Dodge 1946 Rat Rod, an import from the USA that not only shines as a show car, but also boasts an impressive list of awards in the States. This unique hot rod has conquered the hearts of enthusiasts and can now be admired on European soil with an approval in Belgium. The stunning design of the Dodge 1946 Rat Rod makes it a true eye-catcher on any show stage. With an impressive paint job and a carefully crafted patina, this vehicle exudes character and history. Its numerous awards in the USA highlight the quality of craftsmanship and attention to detail that has gone into the restoration and modification of this exceptional vehicle. Under the hood is a powerful 318 Chrysler engine, which provides impressive performance. The 518 Electronic Overdrive transmission not only provides a smooth ride, but also contributes to effic ...

Connecting rod without connecting rod head MAK M43C Recon Crack tested using Magnaflux process. Testing for parallelism of the connecting rod bearing holder and the connecting rod head revealed a deviation of less than 0.01 mm. Connecting rod bearing holder in the brushed state 0.01 mm. Connecting rod is sold as shown. MAK Part Number: 432810-100

connecting rod, connecting rod, push rod, drive rod, with crosshead pin JOSEF EMMERICH PUMPENFABRIK GmbH 22337005 connecting rod foot ( split ) with bearing bush for shaft diameter Ø 70 mm, bearing width: 70 mm connecting rod head with bearing bush for shaft diameter Ø 40 mm, bearing width: 40 mm bearing distance: 300 mm crosshead pin: SP535-G4-0006 bolt diameter Ø 40 mm, Length: 104 mm Shaft diameter: Ø 38 mm New ! Dimensions: 420 x 133 x 70 mm

Piston rod brake, electromagnetic MAYR 2x ROBA - linearstop 80/382.021.0 S Article number: 8277025 Holding force ( per ROBA - linearstop ): 17.5 kN Power consumption ( per ROBA - linearstop ): 3x 0.042 kW Nominal coil voltage: 52 V DC Rod diameter: Ø 25 mm Rod thread: M20 x 1.0 Thread length: 95 mm total length of the rod: 1795 mm possible rod stroke: 1070 mm used, tested ! Dimensions: 1795 x 255 x 170 mm

Piston rod brake, electromagnetic MAYR ROBA - linearstop 60/382.021.0 Article number: 8231140 Holding force: 6.5 kN Power consumption: 3x 0.02 kW Nominal coil voltage: 52 V DC Rod diameter: Ø 20 mm Rod thread: M16 x 1.5 Thread length: 45 mm total length of the rod: 620 mm possible rod stroke: 350 mm used, tested ! Dimensions: 680 x 110 x 127 mm

Hydraulic rod end, rod end for hydraulic cylinder BALKANCAR / Universal Bolt diameter: Ø 25 mm thread (inside): M22 x 1.5 x 25 mm (length) dimensions (single rod end): 110 x 60 x 45 mm spare part for e.g. BALKANCAR forklift ! rod head set consists of 8 rod ends !; used ! Dimensions: 250 x 220 x 50 mm

Hydraulic rod end, rod end for hydraulic cylinder BALKANCAR / Universal Bolt diameter: Ø 30 mm thread (inside): M24 x 1.5 x 45 mm (length) dimensions (single rod end): 130 x 70 x 45 mm spare part for e.g. BALKANCAR forklift ! rod head set consists of 6 rod ends !; used ! Dimensions: 260 x 210 x 50 mm

Hydraulic rod end, rod end for hydraulic cylinder BALKANCAR / Universal bolt diameter: Ø 30 mm thread (inside): M24 x 1.5 x 35 mm (length) dimensions (single rod end): 130 x 70 x 40 mm spare part for e.g. BALKANCAR forklift ! rod head set consists of 6 rod ends !; used ! Dimensions: 260 x 210 x 50 mm

Hydraulic rod end, rod end for hydraulic cylinder BALKANCAR / Universal Bolt diameter: Ø 40 mm thread (inside): M38 x 1.5 x 45 mm (length) dimensions (single rod end): 163 x 95 x 55 mm spare part for e.g. BALKANCAR forklift ! rod head set consists of 4 rod ends !; used ! Dimensions: 390 x 170 x 60 mm

Push rod tensioner, push rod tensioner set DE-STA-CO Model 607 607 - M stroke: 41 mm push rod tensioner set consists of 2 push rod tensioners ! New ! Dimensions: 160 x 110 x 85 mm

Piston rod with piston, without seals ALLIED MACHINE & ENGINEERING CORP. (AMEC) Rod diameter: Ø 25 mm Piston diameter: Ø 40 mm Rod length: 660 mm Total length: 760 mm Rod thread: M16 x 2.0 unused ! Dimensions (package): 830 x 55 x 65 mm

oxyfuel welding rod, welding rod, welding wire MTC MT - G II DIN EN 1253 diameter: Ø 2.0 mm rod length: 1000 mm quantity: approx. 5.0 kg material number: 1.0494 welding rod for oxy-fuel welding, of low-alloy steel, for gas welding of unalloyed steels New ! Dimensions ( packaging ): 1040 x 80 x 60 mm

Type: VK 1056, Y.O.M. 2006. Single-deck rod sizer with integrated feed channel, rod carrier and rod rake made of stainless steel, screen frame rubberized 60 shore, 2 unbalance motors 2.8 kW / 960 UPM, open screen box on compression springs, brake control, steel base. Current cutting at 8 mm; machine was only in use for 12 months, therefore in very good condition.

Qty. 1 Second-hand continuous copper rod casting line Mfc.: Zamet-Budova Mascin, Hydromar, Kobold, Lechler, Lenze, Bauer, SEW-Eurodrive Built: 2012 Type: Continuous horizontal casting process Rod dia.: 20 – 80 mm Rod length: 2.0 – 4.0 m Capacity: The line consist of: Induction holding furnace Crystallizer with radiator - 2 pcs. single-cast dia. 51 – 120 mm & twin casting 20-50 mm Secondary cooling Stretch device Saw blade assembly Run-out table Reception basket Pump station with tanks and heat exchangers and cooling towers for three circuits: 1. cooling of the furnace generator 2. cooling of the furnace inductor 3. cooling of the mold Hydraulic pumping station Mfc.: REXTON – BOSCH Line parameter control panel Cases with electronic control system of the line-2 pcs. Station of preparation, drying, pressing the graphite sleeve of the crystallizer. C ...

Qty. 1 Second-hand bar and wire rod production plant Mfc.: Sarralle, Danieli, ABB, Indar Built: 1990’s, 2000, 2005, 2007, 2010 Revamped: 2008 Capacity: 1,100,000 T/annum Entry material: Scrape Semi product: Billets Size: 130x130 mm or 140x140 mm Length: 8 – 13 m Reinforced Bars: Dia.: 8 - 40 mm Length: 6 – 12 m Rebars: Dia.: 8 - 16 mm ID: 850 mm OD: 1100 – 1250 mm Height: 800 mm Wire Rod: Dia.: 5.5 – 14 mm Scope of supply: Scrap Transportation Machines EAF Ladles Furnace Continuous Caster Billet Reheating Furnace 23 Rolling Mills (Dia. 8-10 mm) 21 Rolling Mills (Dia. 12-32 mm) Wire Rod Mill Flying Shears (2) Spooler Line Cooling beds (2) Cranes Transformes Spare Parts

Heating rod, cartridge heater EAW 900 W ( 900W ) TGL DDR 5.88 2524.6-1142.00 220 V AC Heating rod length (straight): 2650 mm Heating rod cross-section: 6 x 12 mm approx. 3.5 m connecting cable New ! General cargo shipping ! Dimensions: 2700 x 350 x 30 mm

Slot weight support rod, commercial weights, test weights PAGUS 100 g support rod + 20 pcs. brass slot weights a 100 g Accuracy: probably M3 diameter 33 mm bore of the weights: Ø 8 mm Slot of the weights: 6 mm support rod: Ø top 6 bottom 7 mm Dimensions: 33 x 33 x 710 mm

Piston rod, 3 pieces FIBRO, LÄPPLE, FLT 0.121.00266 for parallel grippers 52.85.3-501 / 601 piston diameter: Ø 36 mm, length: 30 mm rod diameter: Ø 25 mm, length: 34 mm thread: M14 x 1.5, length: 20 mm Other quantities on request ! New ! Dimensions ( single piston rod ): 200 x 36 x 36 mm Dimensions ( packaging ): 200 x 180 x 40 mm

Threaded rod, threaded bolt, threaded rod according to DIN 975 -Diameter: M24 -Threaded rod: galvanized -Quality: 4.8 -189 pieces Length: 2000 mm -piece price: 20 EUR net -19 pieces Length: 3000 mm -piece price: 25 EUR net

ID2285 Clamp Rod Magazine/Rod Magazine Rod magazine for drilling rig, 3-shaft magazine Boom magazine for drilling rig, 3-bay magazine

- Connecting Rod Connecting Rod MWM 12341310 - Suitable for several motors - Please note! Price per piece! - 12341310 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and  ...

5kg = approx. 149 pcs welding electrode, rod electrode with reinnickel core rod unused, Manufacturer Thyssen Type Nickel A Original shrink-wrapped in foil, ovp in cardboard! The electrode melts slightly delayed by a pulsating arc, whereby a very good wetting of the base material is achieved. Particularly suitable for joint welding on grey cast iron (old cast iron) Dimensions, welding data, packaging units Diameter (mm) Length (mm) Welding current (A) Directional weight (kg/1000 pcs) Package contents (pieces) Package contents (kg) 2,5 350 50 - 100 21,0 238 5,0 3,25 350 70 - 130 33,5 149 5,0 4,00 350 90 - 150 49,5 101 5,0 Weight approx. 5kg Diameter 3.2mm

Encoder, speed sensor HEIDENHAIN ROD 426B.017 - 2500 ( ROD 426B.017 - 2500 ) 253 756 11 shaft: Ø 6 mm flange: Ø 50 / 58 mm approx. 5.0 m connection cable used, tested , with documents ! Dimensions ( without connection cable ): 72 x 58 x 56 mm Dimensions ( packaging ): 170 x 170 x 60 mm

Encoder, speed sensor HEIDENHAIN ROD 426 B 1024 ( ROD 426 B 1024 ) 251 681 1L 1024 L/revolution < -br />shaft diameter: Ø 6 mm shaft length: 10 mm Flange diameter: Ø 50 / 58 mm bolt circle diameter: Ø 42 mm 3x threaded hole: M4 x 0,7, Depth: 8 mm approx. 1.0 m connection cable used, tested ! Dimensions ( encoder ): 73 x 57 x 58 mm Dimensions ( packaging ): 180 x 140 x 90 mm

Encoder, speed sensor HEIDENHAIN ROD 426.0013 5000 ( ROD 426.0013 5000 ) 254 048 02 5000 L/revolution shaft diameter: Ø 6 mm shaft length: 10 mm flange diameter: Ø 50 / 58 mm bolt circle diameter: Ø 42 mm 3x threaded bore: M4 x 0.7, Depth: 8 mm 12-pin built-in plug New, with documents ! Dimensions ( encoder ): 90 x 58 x 58 mm Dimensions ( packaging ): 180 x 140 x 90 mm

Drill rod holder, quick-change drill rod holder AXA MULTIFIX CH50160 Tool holder: 160 x Ø 50 mm used, tested ! Dimensions: 160 x 80 x 150 mm

Hydraulic rod end, rod end for hydraulic cylinder ORSTA bolt diameter: Ø 50 mm thread ( inside ): M30 x 1.5 x 30 mm (length) 2x thread M10 x 1.5 for clamping screws New ! Dimensions: 130 x 103 x 43 mm

Slot weight support rod, commercial weights, test weights PAGUS 500 g Carrier rod + 10 pcs. Slot weights brass a 500 g Accuracy: M3 diameter Ø 90 mm Dimensions: 90 x 90 x 410 mm

Slot weight support rod, commercial weights, test weights PAGUS 250 g Carrier rod + 14 pcs. brass Slot weights a 250 g Accuracy: M3 diameter Ø 50 mm Dimensions: 50 x 50 x 810 mm

TIG welding rod, welding wire Universally applicable TIG welding rod for root and joint welding on unalloyed and low-alloy steels, general structural steels, fine-grain structural steels and pressure vessel steels, Suitability tested down to -40 °C. -net weight: 5 kg -Number: 7x package available -Price: per package -Weight complete: 5.3 kg/package

Spherical plain bearing, rod end, ball joint head -Manufacturer: SKF, articulated rod Ø 30 mm -Joint head: 1x type S130ES-2RS / 1x without designation -Length: hole spacing 170 to 215 mm -Dimension: 240/75/H45 mm -Weight: 2.1 kg

Spherical plain bearing, rod end, ball joint head -rod end. Shaft Ø 50 mm -Thread: M52x3 -Receptacle Ø: 21 mm -Number: 2x joint head available -Price per piece -Dimension: 250/150/H100 mm -Weight: 5.4 kg/pc.

Spherical plain bearing, rod end, ball joint head -Manufacturer: SKF, rod end type SAL 50-TE-2RS -Thread: M52x3 -Dimension: 250/110/H60 mm -Weight: 3.9 kg

Threaded rod, reaction anchor threaded rod, 20 pieces FISCHER RG M8 x 110 A4 Article No. 50263 Article consists of 20 threaded rods ! New ! Dimensions( packaging ): 170 x 120 x 70 mm

Stainless steel welding rod AVESTA WELDING Ø 2,4 x 1000 mm 316-Si/SKR-Si tw8321-240000 Material No.: 1.4430 Diameter: Ø 2.4 mm Rod length: 1000 mm Quantity: approx. 5.0 kg New ! Dimension ( packaging ): 1060 x 55 x 60 mm

Stainless steel welding rod OERLIKON Ø 2.4 x 1000 mm INERTFIL 2520 E 98 003227 Diameter: Ø 2.4 mm rod length: 1000 mm Quantity: approx. 9.9 kg New Dimensions ( packaging ): 1020 x 65 x 40 mm

Stainless steel welding rod BÖHLER Ø 1.6 x 1000 mm Diameter: Ø 1.6 mm Rod length: 1000 mm Quantity: approx. 21.0 kg New ! Dimensions (packaging): 1020 x 80 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,6 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.6 mm Rod length: 1000 mm Quantity: approx. 25.0 kg New ! Dimension ( packaging ): 1020 x 80 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,0 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.0 mm Rod length: 1000 mm Quantity: approx. 25.0 kg New ! Dimension ( packaging ): 1040 x 100 x 60 mm

Stainless steel welding rod BÖHLER Ø 1,0 x 1000 mm SAS 4-IG Material No.: 1.4576 Diameter: Ø 1.0 mm Rod length: 1000 mm Quantity: approx. 11.2 kg New ! Dimension ( packaging ): 1040 x 100 x 60 mm

> < AVENTICS Series TRBbr /BR /BR /TRB-DA-050-0200-0-2-1-1-3-1-BA 0822242406 Piston diameter: Ø 50 mm stroke: 200 mm Rod diameter: Ø 20 mm Rod thread: M16 x 1,5, Length: 30 mm max. 10 bar used, checked! Dimensions: 380 x 85 x 77 mm

6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,