reversible used for sale

Used Case Packer Ape year 2000 Builder Ape Model 1200 Year 2000 Speed 3600 bph Formats 2 6 1 12 from 0 375 to 0 750 American cartoon Left to right direction reversible Used until 2020 [...for more information send your inquiry to the seller.] refno: INCAS05

As good as new reversible base jaws Insert: Three-jaw chuck with helical toothing, also power chucks. Manufacturer: Three-jaw chuck FORKARDT-F400; RÖHM-Duro-400→ (FOKARDT; ROHM; SCHUNK; KITAGAWA) Name of the base jaws: for example: MFG 400; SFG400 Three-jaw wedge rod chuck ø 400mm: Hand chuck F400; F500L DURO400; DURO 500 Rota-S 400; Rota-S500 THW500 F B= width; H height; L= Length; S=N_backe; N= cross groove for interchangeable jaws; La= hole spacing; J=Za= tooth spacing; S= groove for top jaw or base jaw W = 45 mm H = 55 mm L = 160 mm N = 30mm S = 18mm La= 60mm Thread M16 x 1.5 Weight approx. 9-10 Kg /set

Heat pump / chiller air-cooled, Type: Taurus TECH HTAT 040 HE MTA S.p.A. Heat pump / chiller Taurus TECH HTAT 040 HE (reversible) with hydronic kit, storage tank + pump P15 + fairing hydraulics. Heating capacity kW 99.3 Cold water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 17.2 Available pump pressure bar 0.966 Ambient temperature +7 °C Cooling capacity kW 84.5 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 14.4 Available pump pressure bar 1.24 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 47 Max. current (A) 79 Starting current circuit (A) 263 Protection class: IP54 Dimensions: Length mm 2510, Width mm 1110, Height mm 2270 Weight kg 1113 Connection Rp 2" Serial No.: 2200392018 Year of construction 2022 Condition: Optical 1, Technically ok (Stock  ...

Indexable insert drills, high performance drills with indexable inserts, solid drills, end mills, end mills, milling cutters, indexable insert mills, end mills with internal cooling, indexable insert end mills -Handover: in current condition as seen -Reversible plate: 1 piece missing -Finger milling cutter: indexable insert end mill with internal cooling -Receptacle: Ø 30 mm -Diameter: 16mm -Dimension: 133/40/H40 mm -Weight: 0.4kg

pressure: 200 t chamfer lenght: 3550 mm distance between columns: 3050 mm column arm: 200 mm ajustment speed: 100 mm/sec working feed: 8,0 mm/sec return speed: 120 mm/sec stroke: 190 mm table height: 900 mm dayligth: 350 mm engine output: 15,0 kW oil volume: 150 ltr. Control: ELGO weight of the machine ca.: 13500 kg. range L-W-H: 4800 x 1750 x 2800 mm Furnishing: - simple / electro-hydraulic NC press brake - with digital ELGO display digital position display for backgauge (X axis) digital position display for depth adjustment (Y1+Y2 axis) - swiveling operation, front left - electro-motorized back gauge - X axis - electro-motorized adjustment of the immersion depth - Y axes Machine with torsion shaft - front support arms - continuous adjustment of the pressure force (upper beam) - 1x universal matrix block, reversible - 1x set of split deer foot upper tool - 1x freely movable 2 hand/fo ...

Key data: 4 , 220 mm, 150 mm

Four-sided planer, model P 22 N, 2 sets of planer heads, reversible knife – strip planer knife, sound protection hood built in 85, Weight approx. 1500 kg Spindles: 4 Working width: 220 mm Working height 120 mm

MOSCA Pallet Packing Press Automatic Pallet Packing Press, Model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads, the second strapping head can be moved laterally. The press has an upstream, walk-in centering roller conveyor with turnstile. There is another turnstile under the press, which can be used to rotate the pallet before strapping. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1600 mm Specifications: Infinitely adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Closure Type: Friction Weld Closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. vertical clearance: 1,600 mm Max. throughput width: 1,500 mm Length of the printing plate: 1,600 mm Pr ...

Hand chuck three-jaw chuck FORKARDT, Type:FG315 Supplied with clamping flange Flange for milling or drilling table Three-jaw lining: cyl. Flange mount ø 300 mm, Bore diameter approx. 80 mm FORKARDT Basic Jaws FGB-315 with reversible top jaws. Mounting flange manufacturer FORKARDT DIN 55027 J6 Other DIN flanges on request The lining is cleaned and tested. Jaw guide, spindle and scenery stones are in good condition. Other clamping jaws are available on request. ( Option) Due to the weight, freight forwarding is required. Price within Germany incl. packaging approx. 100,00€

Weibert WJ-FS32-W7 Dressing thickness planer 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables G&2972-2036-W7

plate thickness: 1,5 mm roll diameter: 76 mm bending speed: 4,7/9,4 m/min total power requirement: 0,37/0,55 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 0,6 x 0,6 m Electric 380 Volt: Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm ram stroke speed: 100 mm/sec return speed: 9.0 mm/sec work speed: 90.0 mm/sec work stroke: 200 mm dayligth: 447 mm table height: 900 mm table width: 240 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 11600 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 80.000 euros Special price on request Furnishing: - electro-hydraulic CNC press brake - CYBELEC CNC control model DNC 60 HP swiveling operation, front left numerical control Tool and product library - CNC controlled axes: Y1 - Y2 - X axis - CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm - manual table cambering, adjustment via handwheel with analogue value display - Upper tool holder with wedge crowning (AMADA) - 1x s ...

Weibert FS 32 Dressing thickness planer Planing width 320 mm 3-reversible planer knife shaft HSS Motor 3kW 400V 50Hz Passage height: 4-225mm Numerical display of the planing height Planed dressing and thicknessing tables WJ-300100

Specifications: Center height: 230 mm Center width: 1000 mm Circulation diameter over bed: 475 mm Circulation diameter over bed slide: 320 mm Spindle bore: 50 mm Bed width: 300 mm Speeds: (18) 25 - 2240 1/min Motor power: 3.5 / 6 kW, 2-stage Tailstock mount: MK 4 Quill stroke: 120 mm Longitudinal feed: 0.06 - 0.8 m/rev Transverse feed: 0.044 - 0.6 m/rev Weight, approx.: 1800 kg Dimensions (wxDxH), approx.: 2560 x 1200 x 1710 mm Equipment: - 3-axis digital display, brand: Heidenhain - 3-jaw lathe chuck ø 315 mm with reversible jaws - Quick-change holder System Multifix - Rotating grain tip - Lathe chuck protection with limit switch protection - Emergency stop push button - Coolant device - Machine light - Chip pan

Semi-automatic tapping machine for bolt threads 6 - 72 mm, 1/4 - 23/4", pipe thread 1/16 - 21/2", 16 - 63 mm. Machine on stand. Pole-reversible three-phase motor Clockwise and counterclockwise rotation Weight: approx. 250 kg

SINGLE SHAFT SHREDDER, 1.000 mm wide rotor, 370 mm diameter, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - vibration foundation, Machine prepared for discharge by c ...

Weibert W7-32 5-fold combi machine with new sliding table ! it should be a woman! Planer width : 320mm Motor power: 3 motors 400V 3 KW Dressing table length: 1500mm Planer shaft: 3-reversible knife shaft Passage from 4-230mm Format sliding table 2300mm new profile & length Cutting height: 103mm Saw blade 315mm Swivel 90°-45° Milling machine: rigid 90° Milling RPM: 1400/3500/6000 and 8000 rpm G&W-W7-32

material width: 1550 mm material thickness: 2,50 mm no. of straightening rolls: 21 sheet thickness - min.: 0,60 mm diam. of the rolls ca.: 49,46 mm work speed: 9,3 / 18,6 m/min barrel length ca.: 1775 mm No. of supports up/down: je 7 -fach No. of support rolls: 161 total power requirement: 29 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 5,10 x 1,60 x 2,35 m - Infeed and outfeed table - Roller removal device - Control panel attached to the straightening machine - Switch cabinet - Box with 11 spare rollers with a diameter of 49.46 mm - Electric motorized crowning at the bottom - Height adjustment by electric motor - Swivel/tilt device electric motor - Reversible Switch cabinet: Weight 150kg L x W x H: 1.20 x 0.40 x 2.10 m Table with conveyor belt: Weight 300kg L x W x H: 3.70 x 2.10 x 0.90 m Rollebach: Weight 200kg L x W x H: 2.80 x 1.60 x 0.85 m 1 box of straightening ...

agicom recycling machines: Powerful, very powerful pre-shredder for old cables, scrap, paper/cardboard or plastic. Robust design, hydraulic pusher, easy replacement of the perforated screen, reversible blades Year of construction: 2021 Power: 30 kW; 400 volts Cutting blade: 43x43 mm Rotor length: 600 mm Rotor diameter: 250 mm Dimensions: 1550x1500x2100 mm Weight: approx. 1600 kg

Feeder ANTHON, manufacturer: WAMHOFF, year of construction: 2003, consisting of: 2 driven roller conveyors, type: RB-ST-P L6.0, factory no. 1 56 22, dimensions (WxHxD) approx. 600x85x220 cm, of which 1x with tine holder for forklift loading, 1 driven transfer rail reversible carriage, type: QVW-ST-90 L6.0, factory no. 1 56 10, dimensions (WxHxD): approx. 600x85x220 cm, with moving control panel, transfer conveyor system as buffer or station, type: WUE-ST L6.0, factory no. 1 56 25, with 3 chain cross conveyor units, type: KF-ST L6.0, factory no. 1 56 38

HAAS VF-4 CNC vertical machining center built in 2022 in the USA, is the perfect choice for any manufacturing facility. The machine, which combines functionality, productivity and precision, achieves excellent machining results under even the heaviest loads. This is all due to its extremely stable construction with a large work area, which includes a high-speed spindle, a rotary table and a set of probes for tool measurement and workpiece setting. In addition, in order to fully utilise the machine’s potential and machining capabilities, the installed HAAS CNC controller has been retrofitted with a faster processor and many additional functions. The offered HAAS VF 4 CNC machining center has worked a small amount of time so far and is in perfect condition. The total weight of the machine is 6033 kg. Technical specifications of the HAAS VF-4 CNC milling machine - feeds in the X/Y/ ...

Description: Heavy load trailer with - Double turntable steering - small turning circle - Tilt-safe as steering angle limit - robust, low maintenance - Reversible drawbar - 50mm impregnated wood overlay. Pick up only from KW10/11 possible Capacity 10000 kg Length 6000 mm Width 2500 mm Height 595 mm Rear axle: steerable Front axle: steerable Machine weight approx. 1,3 t Space required approx. 6.7 x 2.5 x 0.725 Approx. Onsite Dimension. (l x w x h): 6,700 x 2,500 x 600 mm, weight approx.: 1,330 kg

Description: Heavy duty trailer with - Double knuckle steering - small turning circle - Tilt-proof because the steering angle is limited - robust, low maintenance - reversible drawbar, length 1200mm - impregnated wooden pad. Load capacity 15000 kg Length 6000mm Width 2450mm Height 625mm Rear axle: steerable Front axle: steerable Tire dimensions 425 x 260 mm Machine weight approx. ,6 t Space requirement approx. 7.2 x 2.5 x 0.625 mm Approx. Onsite Dimension. (l x w x h): 7,200 x 2,450 x 700 mm, weight approx.: 1,860 kg

pressure: 200 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 400 mm ram stroke speed: 100 mm/sec return speed: 9.0 mm/sec work speed: 90.0 mm/sec work stroke: 200 mm dayligth: 447 mm table height: 900 mm table width: 240 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 11600 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm current new price approx. 85.000 euros Special price on request Furnishing: - CYBELEC CNC control model DNC 880 S swiveling operation, front left numerical control on Windows XP interface Basic functions can be accessed via 6 thematic buttons 2D graphical representation Representation of collisions with tools or machine frames Tool and product library - CNC controlled axes: Y1 - Y2 - X - CNC electro-motorized back gauge (X axis) with 2x manually adjustable stop fingers (R+Z axis) Travel X = 800 mm - manua ...

Working width: 630 mm Working height: 3-310 mm Motor output: 7,5 kW Number of knives: 4-TERSA St. Feed speed: 6-20 m/min. Vertikal stroke: elektrisch FIMAL thickness planer type SP 63 A ----------------------------------------------------- NEW MACHINE Partnership Edition Technical data / basic equipment: ----------------------------------------------------- - 4-knife V-shaft, d = 120 mm, speed 4,800 rpm. - Table height adjustment via 4 trapezoidal spindles - chip removal up to 8 mm - Min. / Max. working height: 3/310 mm - Min. workpiece length: 250 mm - Suction nozzle 150 mm - Electrics and protections in accordance with CE standards - Planing width: 630 mm - Motor: 50 Hz., 5.5 kW / 7.5 HP with manual star-delta switch - Infinitely adjustable feed speed from 6 to 20 m/min. - Motorized table height adjustment with electronic positioning device (Input of planing height via keyboard with  ...

Description: Brand: Brandt Type: KDF 210 Year of construction: 2014 Machine number: 0-261- 20-7902 Control: Easy Control 10+ Speed-controlled track control with optical start-stop indication sensors Control screen: LCD, 4 lines of text, ergonomically integrated on the input side on the hood Configuration: Chain conveyor transport Central lubrication Upper pressure/ guidance: via central adjustment with 2 rows of rollers positioned offset to each other Joint cutters: (2x) 0.75 kW, 200 Hz Diamond-tipped tool, manual positioning (Siko counters), max. 3 mm overhang and max. 40 mm workpiece thickness Glue unit: A3 glue unit for hot-melt and possibility for PU glue application Glue output roller under workpiece in following or counterflow mode Heavy-duty cutter Pressure zone: Pneumatically driven 1st pressure roller, 2nd roller running freely ensures good compaction Hacksaws: (2x) ...

Thicknesser Brand: Panhans Type: 436/100 New machine TECHNICAL SPECIFICATIONS Planing width 630 mm Planing height 3 - 300 mm Chip removal max. 8 mm Thicknesser table length 1100 mm Blade shaft speed 5000 rpm Motor power feed 0.55 kW / 0.8 PS / 0.75 kW / 1.0 PS Extraction nozzle Ø 160 mm can be used on the left or right Feed speed 7 + 14 m / min Color RAL 7035 light gray and RAL 5000 violet blue Net weight approx. 1050 kg TECHNICAL DESCRIPTION Solid German mechanical engineering For thickness planing for planing widths up to 630 mm and planing heights from 3 to 300 mm, compact and ergonomic machine dimensions Planed in the factory PANHANS solid steel knife shaft Ø 125 mm with 4 pieces of Tersa reversible knives Pendulum mounted feed rollers Segmented rubber infeed and outfeed rollers with Ø 90 mm ensure smooth and safe workpiece feeding With sectional pressu ...

Planer Brand: Panhans Type: 335/20 New machine Technical data: - Planing width 510mm - Feed table length 1620mm - Delivery table length 1170mm - Total table length 2850mm - Blade shaft speed 5000 rpm. - Extraction nozzle Ø 160mm - Chip removal up to 8mm - Weight approx. 1,050 kg Motor power 5.5kW / 7.5PS Voltage 400V / 50 Hz Required space approx. 2900 x 1500mm Solid German mechanical engineering For dressing and joining, including hollow and pointed joint setting for planing widths up to 510 mm and max. Chip removal up to 8 mm Ergonomic working position directly on the blade shaft PANHANS solid steel blade shaft ø 125 mm with 4 pieces of Tersa reversible blade Finely planed machine tables, total table length 2850 mm Control panel above at eye level with digital display of chip removal, the current delivery table situation (neutral, hollow or pointed joint),  ...

Bread Roll Line König Combiline 600 Year of construction: 2008 Condition: currently being maintained, pictures before servicing For the production of round, oval, stamped, long rolled and flattened products made of wheat dough, mixed wheat dough, grains or fine yeast dough Suitable for shaped rolls, long rolls, and others Working width: 600 mm Max. hourly output: 7.500 pieces (5 rows) Max. hourly output: 4.500 pieces (3 rows, for long rolled products) Weight range: 35-85g Dough divider and rounder, type Basic Rex II, 5 rows Pre-proofing cabinet with pre roller and controlled climate Stamping station with reversible cups for stamping round and long products Forming station with 2 pressure rollers and driven upper belt Panning unit for 60x80 cm or 60x100 cm baking trays and planks Manual removal of the baking trays Including stamping tools  ...

Compact Bread Line WP Kemper Imperator CT Superba For the production of: mixed wheat doughs, mixed rye doughs, rye doughs, grain doughs, round breads, tin loafs Year of construction: 09/2015 Condition: checked and cleaned Dough divider, type: Imperator CT Multi measured dough chamber Weight ranges: 150-600 g / 200-2350 g Hourly capacity: 800-1500 pieces Hopper capacity: 200 kg Round and long moulder, type: Superba Compact Reversible belt with anticlockwise and clockwise drive Electronically controlled flour duster

Equipments: Max Infeed Length: 3″ Min x 12.6″ Max Product Thickness: 6mm (if folded) Speed: 15,000 Impulses/Hour Reversible Left, or Right Max Infeed Width: 5 3/4″ Min x 18 3/4″ Electrical Requirements: 220V 60Hz 16Amp Max Infeed Height: 17 3/4″ x 35 1/2″ Speed: 32.8 – 524.9′ Per Minute