rectif used for sale

Welding rectifier make MESSER-GREISHEIM type Uniwig G 200Built in 1987Power Rectifier: 15 - 180 Aat 180 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDPower TIG welding: 2 - 200 Aat 200 A: 35% EDat 150 A: 60% EDat 100 A: 100% EDOutside dimensions approx: 600 x 1000 x 930 mmfor rod electrode and TIG DC steel / VAWith- mobile- TIG hose package with burner 4.0 m- Ground cable with clampsvery little used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding rectifier make DALEX type G 300Masch. -No: 300003Technical specifications:Stepless welding current: 10 - 300 A.35% ED at: 10 - 300 A60% ED at: 250 Aweldable electrodes diameter: 1.5 - 6.0 mmWeight approx: 180 kgExternal dimensions: approx: 900 x 500 x 760 mmWith- mobile- welding station equipmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

This Qualicaps inspection machine combines computer image processing technique and CCD line sensor camera to capsule rectification-transfer mechanism. The appearance of the capsule is inspected by direct image capture with the camera, controlling its orientation and rotating the capsule during intermittent transfer. The machine controls filled hard capsules directly on the line by meticulous examination of pharmaceutical or nutraceutical products. It allows accurate inspection of capsule appearance performed by color line sensor cameras with the possible immediate expulsion from the production line through an appropriate rejection system, when the machine detect itself anomalies on the product. Technical data: Dimensions mm 2000 x 700 x 2450 Total weight Kg 1000 Voltage Volt 400 Frequency Hz 50 Production characteristics: Capacity 50,000 capsules/hour Compatible capsules: ...

TIG welding rectifier make ESAB type Power TIG 160 / LTR 160Mash. -No: 8429101564 Year 1991Welding range transformer stepless: 4 - 160 Axa0xa0xa0 TIG / DC: 4 - 160 ADuty cycle at 160 A: 35%xa0xa0xa0 at 110 A: 60%xa0xa0xa0 at 80 A: 100%Dimensions L x W x H approx: 700 x 350 x 400 mmfor welding electrodes and TIG, steel, VAWith- compl. Welding station equipment- mobile undercarriage self-madeused, from one operational resolution, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Welding addition rectifier make DALEX type ZG 120Machine -No: 12685 Year 1985can be used with welding transformers whose open circuit voltage is not higher than 70 V.perm. duty cycle: DB 100% - 100 A: HSB 60% - 150A: HSB 35% - 180 Afor welding direct currentExternal dimensions approx: 400 x 200 x 400 mmWith- Welding equipmentused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Hongming HM-ZD6418E Automatix Rigid Box Making Line (Box erecting and enrobing machine) Age: 2017 The Automatic Rigid Box Making Line is suitable to make various Paper covered rigid cardboard premium boxes, such as shoe boxes, mobile phone boxes, wine boxes, etc. The wrapped box's max height is 130mm, with max folding-in depth of 100mm. Features: 1. Suit to all kinds of rigid boxes in mass production 2. Parameter adopts computer digital setting 3. Auto error stop and display 4. Automatic feeder for Cover paper and cardboard 5. 24-hours control for glue pre-heating 6. Wrapper can input 300 product formulas 7. Corner pasting part with independent man-machine control and heating system 8. Adopt YASKAWA servo control system 9. Spotter by electric eye tracing system and hydraulic pneumatic rectifying system to spot correctly (spotting accuracy ±0.2mm) 10. Wrapper can au ...

TIG welding rectifier make MESSER GRIESHEIM type Omnitig 300 DCMake -No: 4140389Welding power at 35% ED: 300 AWelding power at 60% ED: 230 AWelding performance at 100% ED: 180 Aelectrical connection: 380 voltsProtection: 35 amperes15.2 KVA at 300 ACooling: FInsulation: FExternal dimensions: 950 x 500 x 850 mm highused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller -Oscillator Model: ED-WS -Year of construction: 2017 -Voltage: 220 V -Dimensions: 210/210/H130 mm -Weight: 2.6 kg

Machine Type Electrode Inverter Welding Rectifier Böhler brand Type Uranos 1500 Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 30 % ED at 150 Ampere 60% ED at 125 amps 100% ED at 110 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 260 x 120 x 190 mm Weight 3 kg Age 6 months Special accessories carrying strap Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy version 1 piece steel wire brush, 2 rows 30 piece rod elec ...

Here Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No. 7 GDPR and Data Protection Officer: The person responsible for the processing of your data is: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 04847 8068-0  ...

Machine Type Electrode Inverter Welding Rectifier Make EP-Systems Type Cycle 60.16 Plant No. 04E 85048 Connection voltage 1 x 230 V Setting range 40 – 160 amps Duty cycle 60 % ED at 160 Ampere 100% ED at 130 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 26 Ampere 3.25 rod electrodes, since 120 / 130 amps Dimensions L x W x H 420 x 190 x 300 mm Weight 8 kg Age approx. 10 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece ground cable 16 qmm, 4 mr. long 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 1 piece slag hammer, heavy versio ...

DAMET MP 15 - 18 Pneumatic Hand Staplers / Carton Staplers / Box Staplers are hereby offered for sale. Each item works flawlessly and has been regularly serviced. -Booklet Type: 35/15; 35/18 -Magazine capacity: 100pcs. -Operating pressure: 5 - 7 bar -Power: 2 connections/sec. -Air pressure: 0.067 m3/min -Drive: manual -Weight: 1.59kg - Dimensions (L x W x H): 300 x 100 x 200mm Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to pr ...

Machine Type Electrode Inverter Welding Rectifier Ep Systems brand Plant No.: 99J33202 Type W 150 E Connection voltage 1 x 230 Volt Setting range 5 – 150 amps Duty cycle 35 % ED at 150 Ampere 60% ED at 120 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 120 x 300 x 270 mm Weight 4 kg Age approx. 10 years Condition workshop tested good incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 25 pieces rod electrodes Böhler 2.5 x 350 mm 25 pieces rod electrode ...

DAMET DS-3519-E Compressed Air - Carton Lid Stapler is hereby offered for sale. The items work perfectly and have been regularly maintained. -Tool Type: Pneumatic -Magazine capacity: 100 -Working pressure: 4.9 - 7.1 bar / 71 - 103 PSI -Air consumption: 1.13 liters per shot at 5.6 bar -Compressed Air Connection Thread Type: 1/4 BSP -Dimensions (L x W x H): 345 x 115 x 233mm -Weight: 2.45kg - Diameter: Min. 0.8mm / Max. 2.25mm -Length: Min. 15mm / Max. 19mm -for the following staples: 35 / JK560 / Prebena B / BeA Packfix A / Senco XB Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise st ...

Machine Type Electrode Inverter Welding Rectifier with PFC control STEL brand Type MAX 191 PFC Connection voltage 1 x 230 Volt Setting range 5 – 160 amps Duty cycle 30 % ED at 160 Ampere 60% ED at 115 amps 100% ED at 100 amps Current adjustment infinitely variable weldable electrode 4 mm Cooling inverter by built-in fan Version portable mounting system Fuse 16 amps Dimensions L x W x H 420 x 160 x 280 mm Weight 9 kg Age 6 months Special accessories PFC control Condition workshop tested, new incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 16 qmm, 4 mtr. long 1 piece ground cable 16 qmm, 4 mtr. long 1 pair of welder gloves with cuff 1 piece slag hammer, heavy version 1 piece steel wire brush 2-row 20 pieces rod electrodes Böhler 2.5 x 350 mm 20 pieces rod ...

 Model SASL 200x500.  Weight approx: 14 Tm.  Working wheel dimensions: 500x500x305 mm.  Regulator wheel dimensions: 315x500x203 mm.  Extra working wheel  Tooling to change wheel  Retrofited in 1999  Operational and working conditions.  We rectify through outer rings of bearings with diameters between 50 and 200 mm.  If you want, you can see her work on a visit.  Certified according to 1215/97  Attached photos of plate and machine.

roll diameter: 350 mm : 110 mm bending speed: 1-5 m/min Bending capacity: 157 Wcm³ total power requirement: 7,5 kW weight of the machine ca.: 2950 kg Domestic equipments: - Direct drive of all three shafts - Single delivery of the side rollers - Horizontally and vertically usable - Hydraulically movable side rectifier (via control panel) - 2 digital displays for the feed rollers - Hardened rollers - Mobile control panel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BAMAG Electric Magnetic Strap Dim. conveyor belt: A.A.= 1800 mm Belt width : 800 mm Drive: 3 kW slip-on gearbox Dim. Block : L= 1050 x W=1100 mm Power requirement: 4.5 kW Included rectifiers.

Electric magnet block. Brand: Krupp. Block : L= 1650 x W=1200 x H=600 mm. Power requirement block = 7 kW, 35 Amp. Weight about 3.5 – 4 tons. Included rectifiers (new).

IFE Electric Magnetic Strap Brand: IFE Length frame A.A.= 2300 mm Belt width : 800 mm This magnet has 2 magnetic blocks; nr1= main magnetic block, type electro Block : L= 950 x W=900 x H=650 mm Power requirement : 3,5 kW nr2= auxiliary magnet block , type permanent Block : L= 550 x W=620 x H=190 mm Drive: 2 kW slip-on gearbox Included rectifiers.

Rectificadora sin centros GOZUA RC 2-75

Red transport crates are hereby offered for sale. These are made of plastic and have the following dimensions: ( LxWxH ) 60 x 40 x30cm If necessary, the boxes are also available several times. Privacy policy Information on the collection of personal data In this privacy policy, we would like to explain how we handle the personal data that is transmitted to us when using our services. Personal data is all data that can be related to you personally, e.g. name, address, e-mail addresses or user behaviour. Unless otherwise stated below, the provision of your personal data is not required by law or contract, nor is it necessary for the conclusion of a contract. You are not obliged to provide the data. Failure to provide it will have no consequences. This only applies unless otherwise specified in the subsequent processing operations. Controller pursuant to Article 4 No.  ...

Table dimensions: 2000x500mm, magnet clamping plate dimensions: 2x 1000x400mm, weight: 7t, with documentation, rectifier system hand crank dresser, wet grinding device, paper belt filter, grinding wheel and grinding wheel holder, the machine needs to be overhauled.

Welding rectifier: A10-355K, welding process: MIG/MAG, power connection: 3-phase, 220/380V, 50 Hz or 220V, 60 Hz, output range: 50A/15V to 355A/29V. Duty cycle: 355A/29V at 20%, 315A/30V at 60%, 280A/28V at 80%, 250A/27V at 100%. Open-circuit voltage: 17-39V, current at 220V: 41A at 50%, 34A at 60%. Current at 380V: 24A at 50%, 20A at 60%, weight: 175kg.

Krupp Electric Magnetic Belt, heavy duty Block : L= 1650 x W=1200 x H=600 mm Power requirement block = 7.7 kW Power requirement drum motor = 5.5 kW Belt width : 1400 mm - A.A. 3200 mm Speed : 2.5 Mtr./sec. Included rectifiers (new) Weight approx. 7500 kg Stock 3 pieces

Machine type electrode inverter welding rectifier Brand Böhler Type Terra 220 RC Supply voltage 3 x 400 volts, ± 15 % Setting range 3 – 220 amperes Duty cycle 30 % ED at 220 amps 60% ED at 170 amps 100% ED at 150 amps Current adjustment infinitely variable weldable material thickness 6 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 410 x 150 x 330 mm Weight 11 kg Age 6 months Condition workshop tested, as new incl. UVV test protocol Scope of delivery welding system with the following accessories 1 piece ground cable 1 piece electrode cable 1 piece hand shield 1 piece of glass 90 x 110 mm, white 1 piece protective glass 90 x 110 mm, 10 DIN 20 rod electrodes in 2.0 x 250 mm 20 rod electrodes in 2.5 x 350 mm 1 piece instruction manual Warranty 24 months fro ...

Includes two Rectifying Module BMR Colibrì, with documentation, an inspection is possible.

Welding Travo ELREX Type 3x ET70.0.G Transformer, transformer Fabr. No. 02230 Year of construction approx. 1990 for punch welding machines, projection welding machines, roll seam welding machines Consisting of three transformers with water-cooled rectifier block Line data:Power at 50% ED 210 kVA Secondary voltage 7 Volt Primary connection 380 Volt , 50 Hz (three phase) Consisting of three Travos - Data from the single Travo: Power at 50% ED 70 kVA Secondary voltage 7 volts Secondary current at 50% ED 6.7 kA primary connection 380 volts, 50 Hz (one phase) Cooling water requirement per Travo 4 liters/min. On the secondary side sits a water-cooled rectifier block. Connection of DC power dissipation via contact surfaces 50x50mm with thread M20x1,5mm good condition; used

Ingot contactor, DC contactor, contactor, DC switch, Contactor, Circuit breaker, High voltage switch ABB Type NORR63-03 CC-SP FPL7146886R6000 CTC2014028R0001 Contactor Type: NC Main contacts Design: open mounted on bars Drive: AC + sheet magnetic circuit + rectifier + economy resistor Drive Rated voltage: 220-230 V / 50-60 Hz Main contact Rated current: 63 A Main contact Rated voltage: 1500 VDC Number of main contacts NO contacts: 0 Number of main contacts NC: 3 Number of auxiliary contacts: 1 NC + 1 normally open + 1 changeover auxiliary contact Rated current: 6 A - Main contacts with deion chambers for fast spark extinguishing Dimensions W x H x D: 410 x 250 x 195 mm Weight: approx. 9 kg Used but in very good condition; used

DC main spindle drive, power converter device with digital control Simoreg V55 spindle module, drive controller, rectifier, DC regulator Manufacturer SIEMENS type SIMODRIVE 6RA2725-6DV55-0 D380/60 Mreq-GdG6V55-3A0 Version V55 Basic unit Input voltage 3 AC 380 V Input frequency 50 / 60 Hz Input current 49 A Output voltage 380 VDC Output current 60 A Nominal power 22 kW Dimensions (W x H x D) 270 x 260 x 290 mm Weight approx. 25 kg The drive controller is still ready for operation in a Gildemeister GDM42. You can find the right drive motor under stock number 60347 Further components from Gildemeister can be found under stock number: 60346, 60347 , 60348; used

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-160 Supply voltage 1 x 230 volts Adjustment range 5 – 160 amperes Duty cycle 25 % ED at 160 amps 60% ED at 100 amps 100% ED at 80 amps Current adjustment infinitely variable weldable material thickness 4 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 320 x 130 x 200 mm Weight 6 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Machine type electrode inverter welding rectifier Brand Alphaweld Type Alphaforce E-200 Supply voltage 1 x 230 volts Setting range 15 – 160 amperes Duty cycle 25 % ED at 200 amps 60% ED at 110 amps 100% ED at 100 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Portable assembly system version Fuse 16 Ampere Dimensions L x W x H 280 x 130 x 210 mm Weight 8 kg Age 24 months Condition workshop tested, like new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece of glass 90 x 110 mm white 1 piece protective glass 90 x 110 mm 10 DIN 1 pair of welding gloves with cuff 1 piece slag hammer heavy version 1 piece steel wire brush 2-row 25 rod electrodes  ...

Both welding rectifiers are in good condition

Unscrambler for LANFRANCHI bottles 14 pockets year 2006 , with rectifier . On the unscrambler are mounted adjustable pockets with 13 positions, also supplied an additional set of pockets with various adapters. The rectifier is equipped with some format change. Hourly production declared by the manufacturer up to 6,600 b/h.

Rectifier, Capacitor, PHASE CORRECTOR Manafacture: Norelco Type: NACBL 300

Technical data of the used Equiptop ESG-1228ASD Tangential Rectification: Magnetic plane: 712 x 330 mm Automatic working stroke: 760 mm (manual 830 mm) Grinding wheel diameter: 355 mm Grinding wheel thickness: 50 mm Engine: 7 1/2 hP Automatic diamond maker Increased working height CE certified; Year: 2000 Machine in excellent condition, CE certified.

CNC centerless grinding machine Monzesi mod Monza 510 CNC 6 axes complete with piece loading and unloading system CNC Fanuc 160i-T Under power in our warehouse in Gussago BS., Mimu machine tools Italy, Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 250, Wheel diameter: 510, C ...

Steinert Electric Magnet Roll Brand : Steinert Roll length 1000 mm, Ø 700 mm. Power requirement magnet 1.6 kW. Inclusive rectifier 2 pieces in stock.

Centerless grinding machine - centerless Ghiringhelli M100 CNC 1A 400x100mm wheel CN 1 axis plunge + through feed grinding The machine can be seen working in our warehouse in Gussago BS. Mimu(dot)com machine tools Centreless grinding is a procedure for grinding cylindrical bodies and is used for mass production of rollers, cylindrical, conical rollers, jet needles, pump pistons, hydraulic sliders, crosses, drills etc., During centerless plunge grinding, the workpiece is ground in one pass, thanks to the translation of the grinding wheel. For this purpose, the grinding wheels and the adjustment discs have a negative profile of the piece, to work which is given to them with the aid of a tool., The through-feed grinding or also through grinding and longitudinal grinding: pieces, to be worked proceed uninterruptedly with axial feed through the rectification gap., Wheel width: 100, Wheel diam ...

Andrin Electric Magnet Strap Brand: Andrin Length frame A.A.= 2500 mm Strap width : 800 mm Drive: 2.2 kW slip-on gearbox Block : 1900 x 800 x 400mm Power requirement : 3.8 kW Inclusive rectifiers.

Steinert Electric Magnet Strap Brand: Steinert 2 pieces: length frame A.A.= 1800 mm Strap width : 800 mm Drive: 1.5 kW clip-on gearbox Block : 1000 x 750 x 400mm Inclusive rectifiers. 1 piece: length frame A.A.= 2200 mm Belt width : 1000 mm Drive: 2.2 kW slip-on gearbox Block : 1400 x 950 x 450mm Inclusive rectifiers. 1 piece: length frame A.A.= 3300 mm Belt width : 1900 mm Drive: 4 kW slip-on gearbox Block : 2400 x 1800 x 600mm Inclusive rectifiers.

Glue application machine with 2 rollers Mod. SC2R-1300 Year: 2006 Production: FIN s.r.l. Italy Main technical specification: Width of machining: 1300mm Maximum passage between rollers: 120 mm Diameter of rollers: 185mm Progress speed: 19m/min Net weight 390 kg Overall dimensions: 64 x 210 x 136cm Overall dimensions with case: 73 x 222 x 153cm 400 V, 50 Hz, 037 Kw Accurate and uniform application with any type of adhesive, excellent technical characteristics, For the high practicality, functionality and safety for the operator, set it at the at the top of the 2-roll glue application machines. Coating roller covered with acid-resistant rubber, ground and grooved, hard-wearing as they are Built with a rational layer of rubber, it is therefore possible to carry out 6-7 grinds. It is easy and quick to disassemble. Distribute, precisely and evenly on one or both sides ...

Power supply, rectifier module SIEMENS GR40 D48/120(60/100)WBRUG-FGE27 GR40 input: 230 / 40 00 V 3AC 19 / 11 A Output: 48 (60) / 60 (73) V DC 120 / 100 A used, untested ! Dimensions: 680 x 200 x 150 mm

Transformer with rectifier MURR Elektronik MNG 5-230/24 ( MNG5-230/24 ) 85201 230 V 24 V DC 5 A Dimensions: 130 x 100 x 95 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 25 S ( RDRKL25S ) 0,8 kVA Prim. 3 x 380 V sec. 24 V DC 25 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, tested, with downstream three-phase bridge rectifier ! Dimensions: 210 x 210 x 190 mm

Transformer with rectifier ISMET TRANSFORMERS MGSIN 20 700641 230 / 400 V 24 V DC 20 A Dimensions: 225 x 180 x 145 mm

Isolation transformer, three-phase isolating transformer M. RIEDEL TRANSFORMATORENBAU RDRKL 10 S ( RDRKL10S ) 0,34 kVA Prim. 3 x 380 V sec. 24 V DC 10 A 50 - 60 Hz Spare part for TRAUB TND300 ! used, with downstream three-phase bridge rectifier ! Dimensions: 165 x 155 x 160 mm

Transformer with rectifier RIEDEL TRANSFORMATOREN RNTU 120 S ( RNTU120S ) 230 V 24 V DC 5 A Dimensions: 150 x 135 x 125 mm

Transformer, transformer, three-phase transformer BTK TRANSFORMATORENBAU D025 TGL 200-17 64 0,0,25 kVA Primary: 380 V 3AC 50 / 60 Hz Secondary: 18 V 3 AC 8.0 A spare part e.g. for Hohenstein RBT400 ! used, suitable rectifier EL1188 ! Dimensions: 150 x 85 x 150 mm

Electronic Module, Rectifier Board ABB DSQC 314B ( DSQC314B ) 3HAB2216-1 56Q023B used, tested ! Dimensions: 235 x 230 x 90 mm