We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,290 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Key data: 40 mm, 1007 mm
Code 231027 Rewriting Controlled Fast Radials Make DONAU Type DR 40 Machine No. 1137 – 3 Built in 1988 Drilling into full stem 60 40 mm Drilling into full GG 22 50 mm Tapping capacity into the St. 60 M 33 Tapping capacity into the GG 22 M 45 Steep taper of the drilling spindle SK 40 Feed normal ( 5x ) 0.075 – 0.6 mm/rev Drilling spindle speeds 18 pcs. 35 – 1800 rpm Drilling spindle stroke 200 mm Drilling radius min/max 350 / 1300 mm Projection min/max 120 / 1007 mm Height adjustment of the drilling spindle head 450 mm Distance drilling spindle/table min/max 350 / 800 mm Table top 1225 x 750 mm Power 2 / 3 kW 380 Volt Weight 2000 kgs Dimensions LxWxH 2300 x 1225 x 2400 mm Accessories for tapping device Coolant system Condition machine is in good condition
used
Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, radial fan type R2E133-BH66-25 -Voltage: 230V -Speed: 2800 rpm -Power: 24 W -Dimensions: 205/70/H185 mm -Weight: 1.2 kg
used
Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Fan: centrifugal fan Ø 715 mm -Volume output: m³/h -Motor: Dietz 6.8 kW -Speed: 1450 rpm -Protection class: IP 54 -Input: Ø 470 mm -Dimensions: 815/750/H815 mm -Weight: 159 kg
used
Fan, fan, electric motor, blower, blower, centrifugal fan, emergency exhaust fan, flue gas fan, ventilation fan, exhaust gas extraction -Manufacturer: ebmpapst, centrifugal fan centrifugal fan type R2E190-A026-85 -Voltage: 230V -Speed: 2500 rpm -Power: 58 W -Dimensions: 205/70/H185 mm -Weight: 1.6 kg
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 500 x 1055 mm -Projection: 1120 mm -Cone mount: MK4 -Motor power: 1.5/2.2 kW -Speeds: 45-2240 rpm, electrically switchable in steps -Columns: Ø 150 mm -Spindle stroke: 160 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 2000/1200/H2320 mm -Weight: 1800kg
used
Rapid radial drilling machine, radial drilling machine, drilling machine, boom drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm -Cone mount: MK4 -Motor power: 1.35/1.8 kW -Speeds: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg
used
Fan, fan, electric motor, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan motor without fan wheel -Type: MK205-UDK.30.N -Speed: 950/480 rpm -Power: 0.66 kW -Protection class: IP 54 -Price: per piece -Number: 3 piece -Dimension: Ø 368 x 330 mm -Weight: 64 kg/piece
used
Radial drilling machine, drilling machine, boom drilling machine -Outreach: 2055 mm -Max. Distance from machine table to spindle mount: 1700 mm -Cone mount: MK5 -Motor power: 7.5 kW -Speeds: 11.2-1400 rpm -Columns: Ø 450 mm -Spindle stroke: 540 mm -Thread cutting device -automatic feed: 0.037-2.0 mm/rev -Clamping area: 920 x 1600 mm -Dimensions: 2580/1110/H3450 mm -Weight: 6465 kg
used
Fan, fan, electric motor, blower, electric motor, blower, centrifugal fan, emergency exhaust fan, flue gas fan -Manufacturer: Ziehl-Abegg, radial fan type DKHR 560-6-6 -Speed: 855/625 rpm -Power: 0.47kW -Fan diameter: 570mm -Protection class: IP 44 -Number: 5x available -Price per piece -Weight: 16.5 kg
used
Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg
used
The machine is in good condition for its age Availability: immediately
used
SPECIFICATIONS Saw blade diameter: 350 mm Installed capacity: 5 Hp Motor speed: 3000 / 380 volts
used
used
Maximum drilling capacity in steel/casting 63/80 mm The maximum drilling diameter in steel 300 mm leadership Maximum distance spindle axis to the leadership mantle 2000 mm Vertical adjustment arm 950 mm spindle speed - The number of stages 16 - Range from 11 to 2000 /min Main engine power of 5.5 kW Total input 8,5 kVA Weight 7100 kg
used
Type VR 6A Producer Mas Year of manufacture Max. drilling diameter iron/casting 63/80 mm Max. vertical arm adjustment 950 mm Max. motion of milling head on arm 1613 mm Dimensions l x w x h 3240x1300x3900 mm Machine weight 5800 kg Main motor output 5.5
used
Specifications: Tool holder: MK 4 Drilling capacity in ST 60: ø 25 mm Drilling capacity in cast iron GG 20: ø32 mm Tapping performance in ST 60: M24 Tapping capacity GG20: M30 Speed range: (12) 102 - 2000 1/min Spindle stroke: 150 mm Feeds: 0.1 / 0.2 / 0.3 mm/rev Table size: 1175 x 525 mm Column diameter: 170 mm Motor power: 1.1 / 1.5 kW Connection: 400 V Weight, approx.: 2200 kg Dimensions (WxDxH), approx.: 1300 x 1620 x 2270 mm Equipment: - Machined foot with T-slots - Feed device - R- L- Barrel - Tapping device - Emergency stop push button -Chuck -Vice - Machine wedge shoes - Swivel machine table - Dice table - Base plate with T-slots - Machine lamp
used
bore capacity in steel (diameter): 55,0 mm arm length: 1750 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
bore capacity in steel (diameter): 50,0 mm arm length: 1.350 mm workpiece height max.: 1630 mm turning speeds: 19 - 1320 U/min bore spindles - Morse Taper: 5 MK engine output: 5,5 kW weight: 5 t range L-W-H: 2,4 x 1,0 x 3,55 mm feed movement: 475 mm floor plate size:: 1650x1000 mm feeds: 0,07-2,9 mm/U The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Key data: 28 mm, 280 mm
16 speeds 90 – 1980 rpm Drive power 0.7 / 1.3 kW Tool holder MK 3 Drilling capacity in ST60 28 mm Column diameter 105 mm Projection 280 mm Spindle stroke 150 mm
used
Key data: 40 mm, 1200 mm
Specifications: Drilling capacity to the full: 40 mm Projection 1200 mm Motor power 3.5 kW Tool holder MK4
used
Offer 23387 Specifications: - Drilling capacity in steel ST 60 approx. 50 mm - Tapping up to approx. M 50 - Drilling spindle holder MK 5 - Drilling spindle stroke 300 mm - Projection min. / max. 320 / 1600 mm - Column diameter 320 mm - Boom stroke 650 mm - min/max distance: - Spindle – base plate approx. 600 - 1250 mm - Machined base plate, clamping surface approx. 1000 - 1700 mm - 18 spindle speeds 40 - 1800 rpm - 8 feeds 0.04 - 0.63 m/rev - Drill spindle drive 400 V / 7.5 kW - E – Hydr.- Central clamping - Cube table with machine vice - Coolant device - Space requirement approx. W 2400 x H 2950 x D 1050 mm - Weight approx. 3500 kg
used
SECOND-HAND RADIAL ARM SAW LYONFLEX - volt. 380/50
new
Power: 1.35kW; Speed range: 230 â€" 3100 rpm; Speed levels: 9; Spindle holder: MK-2; Drilling stroke: 85 mm; Spindle projection: 140 - 540 mm; Table size: Table size: 500 x 740 mm / 250 kg loadable; Head tilt: 90 left / 45 right; Column diameter: 80 mm; Quick-release chuck: 1 - 16 mm; Weight: 240 kg; Jet Radial Drilling Machine JRD 387 A-T - 400 V stable radial drilling machine from the Profi-Line with integrated base cabinet and height-adjustable, swivelling and movable drilling head for the trade Radial Drilling Machine Jet JRD 387 A-T - Profi-Line with machine base and adjustable drill head ProMAC drilling machines with 13 mm to 40 mm drilling capacity ensure continuous and precise drilling work with precise positioning and depth control All machines are designed for a long service life and are equipped in a variety of ways - for commercial use and maintenance ...
new
Key data: 40 mm, 300 mm
The R-VT model belongs to the latest generation of widely used radial drilling machines. The unique operating concept simplifies machining and supports the operator in selecting the operating parameters. These models enable precise drilling, countersinking and tapping and are the ideal solution for one-off and small-batch production. - Unique operating concept - Advanced control of machine functions - Quill feed with servo motor - Solid construction ensures high stability - like new (exhibition machine)
used
Machine Type: Radial Drilling Machine Manufacturer: ARBOGA Model: ER 830 Year of construction: 1975 Condition: good Offer Type: Used Machine Specifications: Drilling diameter: 35 mm Drilling depth: 175 mm Speed range: 80 – 890 rpm. Spindle mount: MK4 Projection: 1060 mm Propulsion: 1.1 / 1.4 kW Remark: automatic feed tapping device, dice table, coolant device, heavy drill vice, 4 machine feet, quick-release chucks, Storage table Weight: 1500 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Specifications: - Drilling capacity into solid steel ST 60 40 mm - Drilling capacity GG 25 50 mm - Tapping ST 60 M 33 - Tapping GG 25 M 45 - Drilling spindle holder MK - Spindle diameter 55 mm - Quill stroke 200 mm - 18 drilling spindle speeds 35 - 1800 rpm - Drilling feeds 0.075 - 0.60 mm/rev - Height adjustment of the drilling column 450 mm - Drilling radius min / max 305 / 1005 mm - Table size 1200 x 600 mm - Drive 400 V / 6 kW - Space requirement approx. W 1900 x H 2800 x D 2300 mm - Weight approx. 1800 kg -with: -Auto. Selection of speeds + feeds - Tapping device - hydr. Columns + Boom Clamping - Coolant device - T – Vertical grooves on the left side of the machine
used
arm length: 1600 mm taper MK: 5 serial number: 14442 weight of the machine ca.: 4,5 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Description: Including ,clamping cube 1100 x 1000 x 685 mm with 3 accessory cabinets throat: 1,500 mm, surface area of base: 1600 x 950 mm, clamping range of table: 1100 x 1000 mm, turning speed range: 10 bis 2500 rpm, weight approx.: 5,000 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,400 x 3,500 mm
used
Description: • Radial arm saw • Voltage 220-240 V • Swiveling head, tilting head • saw blade diameter 290 mm • Motor 1.10 KW-2800 rpm • Transversal cutting capacity approx. 500 mm • Mounted on metal support, wooden working table with dimensions 800 x 800 mm Approx. Onsite Dimension. (l x w x h): 800 x 1,000 x 1,500 mm, weight approx.: 100 kg
used
Description: max. distance from machine table to spindle holder: 1700 mm,-Motor power: 7.5 kW,-Outer reach: 2000 mm,Clamping area: 920 x 1600 mm,Columns ø 550 mm weight approx.: 8,500 kg, Approx. Onsite Dimension. (l x w x h): 3,500 x 1,150 x 3,360 mm
used
Drilling capacity: 60 mm Radius: 1 mm Spindle taper: 6 Radial arm drill KOVOSVIT MAS - VO 50 / 1600 Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470 x 986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW L ...
used
Drilling capacity: 1600 mm Radius: 50 mm Spindle taper: 5 Radial arm drillWAGNER - PRC 50 / 1600 MACH-ID 8551 Make: WAGNER Type: PRC 50 / 1600 Year: 2008 Arm Length: 1600mm Max. drill Ø cast: 50mm Max. tap Ø: 32M Stroke pinole: 315mm Max. distance spindle - table:1270mm Min. distance spindle - table:370mm Speeds / ranges: 2000Rpm Spindle Taper: 5ISO/Bt/Mk Column sleeve: 350mm Power: 4kW Length: &nbs ...
used
Drilling capacity: 35 mm Radius: 1 mm Spindle taper: 1 Radial arm drill DONAU - DANUFLEX 135 Max. drill Ø steel:35mm Max. drill Ø cast: 42mm Max. tap Ø: M36M Stroke pinole: 165mm Throat: 1050mm Spindle Taper: 4ISO/Bt/Mk Speeds / ranges: 3200Rpm Table Length: 1060mm Table Width: 500mm Power: 4kW Length: 2950mm Width: 1800mm Height: 1300mm Weight: 2500kg
used
Drilling capacity: 1 mm Radius: 1 mm Spindle taper: 4 Radial arm drillForadia - GR 50 - 1200 MACH-ID 8525 Make: Foradia Type: GR 50 - 1200 Year: 1990 Arm Length: 1200mm Max. drill Ø cast: 60mm Max. tap Ø: 40M Stroke pinole: 110mm Max. distance spindle - table:1165mm Speeds / ranges: 1460Rpm Spindle Taper: 4ISO/Bt/Mk Throat: 1mm Column sleeve: 300mm Table Length: 1400mm T ...
used
Longitudinal X: 12000 mm Radius: 1 mm Drilling capacity: 600 mm Spindle taper: 500 CNC Brand: _Unknown / Other CNC Model: R&D MTC 4 2007 New CNC MTC 4 ( Open Loop Heavy Duty Machining) New wire / cable / engines / measuring systems Jogging mode with deep hole drilling modus Boring cyclus with return pulling and pause positioning Camera function visulising drilling proces Equipped with: Drilling boring shaft 178 / 238 / 346 / 500 mm (threading connection) Steady rest for diameter 300 / 480 / 760 / 1050 mm Drilling head BOZA Pull Boring Drilling head BOZA BTA Drilling Drilling head BOZA Counterboring Max. drill Ø steel:600mm Drilling depth: 12000mm Table load: 63 Ton supported Power on spindle: 129kW Speeds / ranges: 355Rpm Length: 38000mm Width: & ...
used
Description: Machine number 30288, working range up to 2000 mm diameter, accessories twist drills, countersinks and taps weight approx.: 5,500 kg, Approx. Onsite Dimension. (l x w x h): 3,000 x 1,300 x 3,325 mm
used
Description: Arm lenght: , 2.000 mm Height of arm electrically adjustable Morse taper spindle 5 spindle speeds: 30 to 1400 rpm Supplied with hub. Internal reference: ,CBT-020X weight approx.: 6,000 kg, Approx. Onsite Dimension. (l x w x h): 3,100 x 1,400 x 3,400 mm
used
Description: OMGA-MAGH model RADIAL 700 radial saw, hp 3 motor, reach 700 mm Approx. Onsite Dimension. (l x w x h): 1,200 x 1,100 x 1,500 mm, weight approx.: 200 kg
used
Description: OMGA radial saw model RADIAL 800, hp 3 motor, reach 800 mm Approx. Onsite Dimension. (l x w x h): 1,500 x 1,500 x 1,500 mm, weight approx.: 250 kg
used
Description: Drill vice Drill chuck 3-16 mm Coolant system Technical spec: Taper in spindle: Morse taper 4 Approx. Onsite Dimension. (l x w x h): 1,800 x 1,200 x 2,200 mm, weight approx.: 2,000 kg
used
bore capacity in steel (diameter):40 mm arm length:1250 mm workpiece height max.:1390 mm Dist. spindle nose & working surface base:350 - 1260 Spindle travel:315 max. boring diameter:40 mm Distance between spindle axis and column:350 - 1260 spindle taper:4 MK Range of spindle speeds:22,4 - 2800 Number of spindle speeds:16 Number of spindle feeds:16 Table:500 x 630 Travel of spindle head:900 mm total power requirement:3,5 kW dimensions of the machine ca.:2150x1070x2840 m feed:0,09 - 1,5 m/min weight of the machine ca.:3 t
new
Modell:RB 50 | RB 63 | RB 80 bore capacity in steel (diameter):50 | 63 | 80 mm arm length:1600 | 2000 | 2500 mm workpiece height max.:1220 | 1600 | 2000 mm Distance between spindle and column, max.:1600 | 2000 | 2500 mm Distance between spindle and column, min.:350 | 400 | 450 mm spindle taper MT:5 | 5 | 6 MK spindle turning speed range:25-2000 | 20-1600 | 16-1250 U/min transmission ratio:16 Stk. feed range:0.04-3.20 | 0.04-3.2 | 0.04-3.2 mm/min dice table:630x500 | 630x800 | 800x1000 mm power capacity:4 | 5,5 | 7,5 kW Weight approx.:3500 | 7000 | 11000 kg Machine size (LxWxH):2500x1070x2840 | 3080x1250x3291 | 3730x1400x4025 mm cube table GB/T6170:Größe siehe tech. Daten foundation bolts:6 Stück slots with screws:6 Stück reducing bush:MK 3/1, MK4/2, MK 4/3, MK 5/4 payment: 100 % before loading warranty:12 months
new
:RB 100 | RB 120 bore capacity in steel (diameter):100 | 125 mm arm length:3150 | 4000 mm distance spindle center to floor plate:2500 | 2500 mm distance spindle center to table:min. 750 mm spindle stroke:500 | 560 mm Distance between spindle and column, max.:3150 | 4000 mm Distance between spindle and column, min.:570 | 600 mm spindle taper MT:6 MK | Metrisch 80 spindle turning speed range:8-1000 | 6-800 U/min transmission ratio:22 feed range:0.06-3.2 mm/min dice table:800x1250 mm power capacity:15 | 18,5 kW Weight approx.:20000 | 28500 kg Machine size (LxWxH):4780x1630x4720 | 5817x2150x5120 mm payment: 100 % before loading warranty:12 months
used
bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990
used
bore capacity in steel (diameter):63 mm arm length:2000 mm workpiece height max.:135 mm spindle stroke:400 mm reus:16 Stufen table-size:630 x 800 mm tool taper:MK 5 speeds:20 - 1600 U/min spindle feeds::0,04- 32 mm/U work table::800 x 630 x 550 mm total power requirement:5,5 kW weight of the machine ca.:6200 kg dimensions of the machine ca.:3100 x 1250 x 2500 mm Year:ca. 1990
used
bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm
used
bore capacity in steel (diameter):40 mm arm length:1200 mm workpiece height max.:1227 mm surface area:1475 x 900 mm no. of flutes:3 groove width:25/ 50 mm spindle cone:MORSE 4 number of spindle speeds:45- 2800 U/min spindle headstock:Bew.Arm : 945 mm with vertical adjustment:Arm 710 mm spindle diameter:35 mm bore depth:300 mm total power requirement:3,0 kW weight of the machine ca.:2800 kg dimensions of the machine ca.:2290 x 910 x 2860 mm
used
bore capacity in steel (diameter):50 mm spindle cone:V MK spindle stroke:340 mm hight above plate:1230 mm revolutions of the spindle, 16 steps:25 - 2000 U/min Height adjustment:580 mm automatic feed rates:0,04 - 3,2 mm travel of the spindle head on the arm:1250 mm table height:500 mm dimension of the dice table:630 x 500 x 500 mm Motor output:4 kW range L-W-H:2500 x 1070 x 2840 mm weight:3500 kg Machine description: - stable cast body - Gearbox with hardened and ground gear wheels in oil bath - Thread cutting via spindle reversal - Hardened and ground heavy column - right-left-run - drilling depth limitation - high spindle torque - Feed overload clutch - quiet running - Hydraulic, switched feed and spindle gear with preselection - Hydraulic clamping of the stop, the column and the drill head - Ground and hardened guideways - ergonomically arranged controls - Lighting - standard - Coolant ...
used
Single column hydraulic press, straightening press, punching bar ECKOLD press frame with hydraulic cylinder, mobile press, punching unit type RSD 1500 - 125 Masch. No. 317 / 690 Year of construction approx. 1986 Compressive force 150 ton. Projection 125 mm Ram stroke 35 mm Table size 280 x 210 mm Ram surface 125 mm Installation height (tappet to table) max. 265 mm Table height above corridor 403 mm Hydraulic operating pressure max. 500 bar - without hydraulic unit tappet surface with 4 threads M16 and 20 mm guide groove, in the middle a centering hole 15 mm- 1 piece high-pressure hydraulic hose with male thread M30x1.5 mm , Hose length 4 meters - 1 piece High pressure hydraulic hose with union nut M30x1.5 mm, hose length 4 meters Space requirement L x W x H 700 x 300 x 1450 mm Weight 1250 kg good condition; used
used
Used Membrane Filter Press, Chamber Filter Press for sludge dewatering Rittershaus & Blecher / VEB Stassfurt 1000x1000 ( Mix-Paket) Plate size: 1000x1000mm Cake thickness: 40 mm length: 5500 mm Number of Plates: 60 filter pressure: 8 Bar Membrane pressure: 15 Bar Plate transport: manuell filterclothes: optional Membranmix-Paket The machine is in a goog condition and 15 machines like this availabe.