profile extruder used for sale

see pdf description

Description

Description Single Screw Extruder Screw diamter 60 L/D 25 Motor power 27,5 kW

Description Single Screw Extruder Screw Diameter 45 L/D 30 Installed Power 145 kW Working Hours 27970

Description Conical Twin Screw Extruder Screws Diameter 45 - 97 Screws Length 390 Barrel zones 3 Nr.1 vent Thermoregulated screws Motor power 15,4 kW Forced feed

Description Conical Twin Screw Extruder screw diameter 80 Thermoregulated screws 1 vent Motor power 68 kW

Machine practically not used like new In 2021 used 4 times Drum with font height 4mm letters small AND capital , all Polish characters

Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control.

Screw diameter: 59mm, screw rotational speed: 25-250/min, with complete documentation, control cabinet, screen changer, side dosing unit, granulator and additional accessories.

Was used for PVC, PUR and TPEV, with control cabinet, used screws and one used cylinder, with documentation, was maintained regularly.

PET films were produced on the extruder, working width: 650-800mm, output: 600-700kg/h, with cooling spirals, new extruder screw, degassing system, other spare parts and documentation, without dosing system, an on-site inspection is possible.

see PDF attached Condition very good

Corona Pull Roll Station 1 Primer Coater & Dryer 3 Extruders (with QSE Adapter, extrusion Do, Die, Gravimetrics 3+1) Auxiliary Unwind with splicing unit shafted desi! Laminator Edge Trim Razor Blade Beta Thickness Gauge PROTAGON Corona with Nip Station 3 Edge Trim Shear Cut Centre Slit&Spreader Ro Automatic Splicer Two direction Rewind Shafted Design Typlcal substrates: Paper:20 - 150 g/m2 Aluminium :6,35 - 25 μm PE:40 -120 μm BOPA: 15-50 μm BOPET: 9 -50 μm (smooth and metallised) BOPP: 15- 50 μm (smooth and metallised) Nonwoven PP: optional The extruder or extruders of the extrusion sta· motorized carriage. This carriage with a 3-\i UP/DOWN,LEFT/RIGHT and IN/OUT travel. The extruder carriage consists of: guide frame 4 wheels. Height adjustment traveldrive Side adjustment Control cabinets EXTRUDER A Screw diameter: 114.3mm (4.5 inches) Screw ...

Complet chrome steel 3-roller extruder Speed control Coarse feed rollers Maximum width:: 600 мм Stencil interchangeable Width/depth: 650 мм х 1'000 мм, height: 1'550 мм very good condition

Used dough weigher RHEON, type: KN-125 with belt scale and rotary table -Refurbished- - for single or double-filled products, such as coloured cookies, sweets or other pasta - all possible forms (see photo) - 100 recipes can be stored - in stainless steel and food sterile - with belt scale from OSC - optional double filling unit - Condition: very good, as new, completely overhauled - 6 months warranty Specifications: - Weight range: 10 - 90 g - Product length: no limit - Output: 1,200 - 6,000 pcs./h (depending on product) - Weight performance: max. 180 kg/h - Machine dimensions: 1,516 x 874 x 1,360 mm Visits and test runs are possible by arrangement.

Key data: 160

Extruder for pellet manufacturing Brand: Erema, model: RM160 TF-VSV, year: 2001, 160 mm Ø, double degasser, motor: 200 kw, agglomerator with motor: 132 kw, hydraulic filter changer, wire head, bathtub, vacuum pump and Noodle Previero with vibrating screen. Complete dehumidification installation.

Refer to code 1042 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1043 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1044 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1045 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Refer to code 1046 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.

Year of Build: 1993 Complete wardrobe DC Motor Platifying system in poor condition Complete heating system

Hopper – gravity charge Auger: 38CrMoA1A, nitrided – new Cylinder: 38CrMoAlA, nitrided, bimetallic, air-cooled – new ; Motor power: 160 kW A.C. controlled by inverter Screw diameter: Ø130mm; L/D=38:1; Maximum speed of screws: 140rpm Degassing system: vacuum pump : 3kw Double degassing Heating zones: air-cooled heaters Air cooling, cooling power: 0.37Kw×7; 7 cylinder heating zones + 5 additional zones per head Productivity: up to 450 kg/h

- Year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 50 mm - L/D ratio: 22 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2300 mm - Extrusion axis height 500mm - Capacity: 40 - 50 kg/h - Ability to measure mass pressure

- year of manufacture 1985 - manufacturer Bielloni Castello Italy - Screw diameter: 60 mm - L/D ratio: 24 - Rotation speed: 20-100 r/min - Planetary gear (silent) - number of heating zones on the cylinder: 3 including two cooled - cylinder cooling: fan cooling, - water backfill cooling - Main motor power: 49.9 kW, DC - Temperature controllers: K 49 Italian production - regulation "fuzzy control" - Extruder length 2400 mm - Extrusion axis height 500mm - Productivity:60- 90 kg/h - Ability to measure mass pressure

Single screw extruder, Troester year of manufacture 1992 Auger type: 38CrMoA1A, nitrided Cylinder: 38CrMoAlA, nitrided, air-cooled cylinder; Motor power: 55kW A.C. engine – no speed control Engine speed: 1480rpm Screw Diameter:90mm; L/D=38 Degassing system: vacuum pump : 3kw Double degassing Heating zones: ceramic heaters, air-cooled Cylinder cooling - air Output: up to 180 kg/h Net price; 8 500 Eur – cracked reducer body – to be repaired – poor condition of the plasticizing system Net price; 11 900 Eur – repaired reducer body – started

weight: 2,2 t extruder diameter: mm : : The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Compact cascade extruder - 1x extruder with 80 mm screw diameter - 1x extruder with 70 mm screw diameter - Vacuum degassing or atmospheric - Control cabinet / control for both extruders - Extrusion nozzle

Berstorff Strainer Extrusion Line Consisting of: Extruder Supplier Berstorff Type GE 150KSx16D Year of construction 2007 Pins: 12 Pins per level: 8 Condition: good Weight approx. 10000 kg Screen change: hydraulic, bladder accumulator 20lt / 300Bar D = 200mm Gear pump Supplier: Maag Pump Systems Type: extrex® 110-5 RV Volume 716 cm³ / rev Year of construction 2013 Condition: good Heaters Supplier: Regloplas Type P140 Year of construction various Number 5 pcs. Cooling bath Cooling medium Water above, 2 rows below with 4 fans each Year of construction 2006 Condition: good Dimensions 9m Weight approx. 500 kg Especially 8 fans Installation tape Year of construction 2006 Condition: good Weight about 300 kg

Francis Shaw 30mm Extruder Roller Feed LD ratio 15:1 Year 1993

Berstorff 8inch (200mm) Cold Feed Pin Extruder Manufactured by: Krauss Maffei Berstorff Extruder Type: Vac GE 200 SC, Pin Type No of Pins: 2 X10 + 1X12 (Hydraulic adjustment) Screw Diameter: 8"/200 mm L/D ratio 18:1 Drive: 300 Kw, 1500 RPM Screw speed: 33pm Complete with Control Panel Roller Die Suitable for rubber compounds Year 2009

Berstorff 6inch (150mm) Strainer Extruder Manufactured by: Krauss Maffei Berstorff Model: GE 150 K Screw Diameter: 6"/150 mm L/D Ratio: 6 Speed: Variable, up to 45 rpm Motor: 90 KW, 1500 RPM Transmission: Direct Drive, 3 steps reduction Gear Reduction Ratio: 33:1 Year 2009

Key data: 200 mm, 18

available Berstotff Rollerhead - Extruder Cold Feed Extruder - 200mm x 218D 2 roll calendars 400mm x 1200mm see attached description!

SIEVE CHANGER HYDRAULIC XALOY HE 35 100MM Little used in good condition Weight of sieve changer excluding hydro unit: 375kg Sieve plate 100mm Passage 75 mm Including 3 kW hydraulic unit Year of construction 2018 Hardly used, and it shows. Price: €6250 ex VAT Kreyenborg BD plasters Nordson Xaloy Dynisco

Key data: 2 mm

CPP 7 ply , Testline, can also be used for smaller special productions. Film width max = 650 mm, Output max. = 200 kg/h Nozzle width = 800mm 5 Extruders: 2x Ø 60mm, melt pumps available 70 kg/h each 3x Ø 38mm 19 kg/h each Output: 200 kg/h Weight range: 50-700 μm, Hopper and pneumatic conveying option! Cloeren Feedblock EDBBCAA EBBCDCA ACEDEBA Cooling roller unit with 3 rollers Rewinder diameter max = 300 mm

Screw Diameter: 60 mm // Throughput: 250 kg/h

Screw Diameter: 72 mm // Throughput: 180 kg/h

Screw Diameter: 50 mm // Throughput: 120 kg/h

Screw Diameter: 35,6 mm // Throughput: 100 kg/h

Screw Diameter: 62 mm //

Screw Diameter: 50 // Throughput: 100

We can offer a complete Barmag PA-6 FDY spinning line, manufactured in2001, model of winder is ACW-6T, 1200mm/8 ends, consist of 2 extruders,diameter: 150mm, 4 beams, each beam has 6 position, each position has 8 spinnerets, 1 hot gudet,diameter 220mm,length 390mm, meter pump 1.8cc, spinneret diameter 85mm, suitable for spin 40-100d yarn. pitch 1000mm, total 24 positions, just stoppes, can be run any time.seerious buyer contact us. We also have some Barmag FK6-12 DTY machines. a complete PA-6 polymerization plant. We are machine dealer of synthetic fiber/yarn, locate in Shanghai,China,with 23 years experience.

Key data: 130 mm, 35 , 600 U/min

Material: PE, PP, PS, ABS Details: DC motor, segmented screws and barrels, screw speed max. 300 rpm, degassing, vacuum pump, mass pressure and mass temperature sensors. Control cabinet for heating and motor control (NEW. Siemens S7) Screw Ø: 2x 130 mm L/D: 35:1 Motor: 500 kW (DC) Optional: side feeding, screen changer, GALA underwater pelletizing

Used Cincinnati conical twin-screw extruder model CMT 35. 2 pieces available: 1 pc. - new 1989 1 pc. - new 1990 Technical data: - drive: DC 9kW motor - heating zones: cylinder - 3, head - 3 - cylinder cooling - oil - vacuum degassing pump

Twin-screw extruder, parallel, counter-rotating Producer: AMUT Screw diameter: 92 mm L/D ratio 28:1 Drive motor: 60 kW (400V, 50Hz, 3ph) AC Two sets of screws (for ABS and PVC processing) Oil unit for thermostatting of PVC screws Number of cylinder heating zones 7 Number of heating zones of the head and adapter 5 + 1 number of cylinder cooling zones (air) 4 Without control (control components available)

Weber DS60 Twin screw extruder pipe machine Molds from 16 inches to 125 inches available Screws have been bought recently Capacity : 200 KG per hour

AVITA EXTRUDER It is a single layer extruder with a single screw. Its production capacity is around 50/60 kg per hour. This machine is designed to make small and medium widths (with printing if necessary) in shrink or bundling. Year 2018 (commissioning 2020) very little served HD and comics production Maximum width 900 mm Double winder for film Micro perforation 2-color printing unit – 600 mm cylinder + sleeve cylinder 3 dies: 70 – 80 – 130 3 air rings 4-component Plast’control mixer

Mikrosan 90/23 PVC parallel extruder machine Capacity : 350 Kg / hour Machine is in good working condition. It can be seen in production. Screw and barrel has been recently replaced with new one.

Plastic hose manufacturer extruder For processing LDPE, HDPE and regranulate, so far only clean original material was used within. Production size (tube width): 35 mm - 250 mm (without core change) Performance: depending on material thickness Pulley thickness: 25 mm Regularly maintained machine

Single screw extruder: - practically not used - we have instructions for the extruder - type WJ45 - produced by a Polish company - WW Ekochem - a device designed for the processing of plastics, soft PVC -consists of a drive system (15kW motor and gearbox), a plasticizing system (a cylinder with a screw mounted inside), a frame, a heating and cooling system and a head - Feeding the raw material from the gravitational hopper - control by means of a control device -control cabinet - length 190cm - width 80cm -height 184cm -mass 710 kg