process tank used for sale

CNC VERTICAL MACHINING CENTER Condition Used Good Condition Control Type Mazatrol MPlus X axis travel 1.120 mm Y-axis stroke 510 mm Z axis stroke 510 mm Spindle speed 40-7,000 rpm Spindle cone ISO 40 Table dimensions 1.460 x 510 mm Weight on table 500 Kg Rapid feed rates 24-24-20 m/min Tool turret 24 positions Chip Evacuator Accessories

Mixing tank 80 liters REITZ MB80 for bulk materials Used open mixing tank approx. 80 liters with geared motor 0.75 KW and inclined blade stirrer 700 mm Application: Mixing of powdered materials. Slow-running, high-torque agitator for powdered mixes. High torque with low energy consumption. Stirred tank: Mobile mixing tank made of stainless steel with bottom slide for draining the mix. All boilers are refurbished and clean. Capacity approx. 80 litres Geared motor: Geared motor Lenze 0.75 KW, 230 / 400 V, 3 phases, 50 Hz, 1410 rpm, IP 55, ratio i = 56, 25 revolutions per minute at shaft output. With motor protection plug to protect the geared motor. Shaft: stainless steel shaft diameter 20 mm, length 500 mm, material 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 700 mm, material stainless steel 1.4571

REF-0 FELTRACON LEMON PROCESSING AND SLICING LINE Line for cutting lemons into slices and half slices Manufacturer: FELTRACON Model: FC3281-S03 Year: 2006 Throughput: 750 kg/h (depending on the type of product) Product temperature: 5-20 °C. Composed of: 1) Accumulation elevator conveyor: Voltage: 220/380 V+PE [50 Hz] Rated power: 0.25 kW Rated speed: 0.087 m/s Overall dimensions: length 2,620 mm; width 1,750 mm; height 2,300 mm Belt effective width: 360 mm Net weight: 350 kg approx. Accumulation hopper: 200 litres (max.) 2) Cutting head with feed conveyor: It cuts the lemons into slices, while both ends of the product are discarded. Voltage: 220/380 V+PE [50 Hz] Rated power: 0.75 kW Max. product feed (including fallen pieces): 180 pcs/min Usable lemon dimensions: 42 mm Slice thickness: 7 mm Overall dimensions: length 1,750 mm; width 1,050  ...

Stirring tank 150 liters with agitator 0.6 KW, 900 rpm and inclined blade stirrer 244 mm Container: Single-walled stainless steel tank 150 liters with drain tap. Rollable aluminum frame with aluminum profiles 45 45 mm. 4 swivel castors, 2 of them with brake. Electric motor: Used, powerful electric motor Baumüller, 0.6 kW, 900 rpm, 3 x 230/400 volts. With motor protection plug. Shaft: Precision stainless steel shaft D20, length 700 mm, diameter 20 mm, Material: Stainless steel 1.4301. Coupling: Rigid shaft coupling, material stainless steel 1.4571 Agitator: Double-bladed inclined blade stirrer, diameter 244 mm, material stainless steel 1.4581, blade adjustable in angle.

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control type Fanuc 16 I X Axis Stroke 700 mm Y Axis Stroke 700 mm Z Axis Stroke 800 mm Axis B 3660000 Nr. pallets 4 Rotational speed 20,000 rpm High pressure 65 Bar Spindle connection HSK 63 Table dimensions 630 x 630 mm Tool magazine 72 positions Chip Evacuator Accessories

CNC VERTICAL MACHINING CENTER Good condition Control Type MAX Control X axis travel 1524 mm Y-axis stroke 660 mm Z Axis Stroke 610 mm Spindle speed 10,000 rpm Table dimensions 1670 x 660 mm Spindle connection BT40 Tool turret 24 positions Number of controlled axles 3 Various tools Chip Evacuator Accessories

CNC VERTICAL MACHINING CENTER Good condition Heidenhain control X axis stroke 800 mm Y-axis stroke 600 mm Z axis stroke 450 mm Spindle speed 30,000 rpm Rapid X Y X 40.000 mm/min HSK spindle connection Table dimensions 600 x 900 mm ATC 20 tools Chip Evacuator Accessories

:::SPECIFICATIONS::: CNC Model: Fanuc CNC version: 18 - M Tool connection: iso 40 Spindle power: 15Kw Number of spindle revolutions: 6000 Number of tools: 24 X Shaft Stroke: 1050mm Y Axis Stroke: 510mm Z Axis Stroke: 560mm Rapid feed linear axes X Y Z: 12m/min Pallet change: yes Pallet size: 1100 x 470mm Maximum load allowed: 1000Kg Side pallet change: yes High cooling pressure: yes Chip evacuator: carpet :::D IMENSIONS AND WEIGHT::: Length: 5670mm Width: 3500mm Height: 3000mm Weight: 7830Kg

CNC VERTICAL MACHINING CENTER Excellent condition Control type Heidenhain 426 X Axis Stroke 1400 mm Y Axis Stroke 700 mm Z Axis Stroke 760 mm Spindle connection ISO 40 Spindle speed 15,000 rpm Spindle power 35 Kw Tool magazine 40 positions Table size 1500 x 710 mm Equipment Flat guides Chip Evacuator Accessories

CNC HORIZONTAL MACHINING CENTER Good condition Control type Fanuc 18I-MB X Axis Stroke 710 mm Y Axis Stroke 610 mm Z Axis Stroke 610 mm Table dimensions 500 x 500 mm Spindle speed 15,000 rpm Spindle connection DIN 6987-1 Permissible weight 500 Kg Tool magazine 60 positions Cooling pressure 50 Bar Table indexing 0,001 Chip Evacuator Accessories

CNC VERTICAL MACHINING CENTER Good condition Control type Siemens Sinumerik X axis 600 mm Y axis 540 mm Z axis 540 mm Table size 750 x 540 mm Spindle table distance 145-685 mm Spindle power 15 Kw Spindle speed 8000 rpm Tool magazine 20 positions Chip Evacuator Accessories

Postforming machine in cycle Brandt type PF 20/31 Specifications: • Working length max. (mm): 3100 • Profile height max. (mm): 200

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type Siemens 840D X Axis Stroke 630 mm Y Axis Stroke 800 mm Z Axis Stroke 850 mm N. pallets 12 Table dimensions 500 x 500 mm Max. workable weight 600 Kg Spindle speed 18,000 rpm Cooling lubricant through spindle center 80 bar Tool holder HSK-A63 Tool magazine 303 positions Renishaw OMP60 infrared probe Continuous table 360,000 positions Magazine for round pallet RS12 Accessories Chip Evacuator, High Pressure

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type OSP-P200M X Axis Stroke 700 mm Y Axis Stroke 900 mm Z Axis Stroke 780 mm N. pallets 2 Table dimensions 500 x 500 mm workpiece dimensions Ø 800 x 1.000 mm workpiece weight 800 Kg Spindle speed 6,000 rpm Tool attachment BT-50 Tool magazine 60 positions Accessories Chip Evacuator, Electronic Handwheel, Renishaw Probe

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type Mori Seiki MSX-501 X Axis Stroke 630 mm Y Axis Stroke 600 mm Z Axis Stroke 670 mm Table dimensions 500 x 500 mm Spindle speed 14,000 rpm Spindle connection ISO 40 Spindle power 20 Kw Permissible weight 500 Kg Tool magazine 60 positions 2-position pallet changer Continuous rotary table High pressure 50 bar Chip Evacuator Accessories

Universal machining center for processing 5 pages Machine in version "increased machine accuracy" Travel x-axis 1250 mm y-axis 880 mm z-axis 800 mm Automatic swivel milling head horizontal position/ vertical position B-axis 360,000 x 0.001° Table size 1250 x 1000 mm workpiece weight 2000 kg Rapid traverses x/ y/ z 40 m/min Feed speed 15,000 mm/min Motor spindle speed range up to 10,000 1/min Drive power at 40% /100% ED 30/ 20 KW Spindle torque at 40 /100% ED 285/ 190 Nm ----- Tool magazine 60 tool positions Tool holder SK 50 ----- Space requirement machine with production package length x width x height 7.4 x 5.9 x 3.1 m weight of the machine ca. 14.800 kg Heidenhain TNC 430 IKZ 40 bar Conveyor Coolant system Probe Oil and emulsion mist separators Various tool holders SK50

CNC VERTICAL MACHINING CENTER Condition Used Good Condition Control Type Brother B00 Spindle table-nose distance 645 mm X axis stroke 550 mm Y-axis stroke 400 mm Z axis stroke 415 mm Rapid feed X-Y-Z 70 m/min Spindle speed 12,000 rpm Spindle power 6 Kw Spindle connection BT30 Table dimensions 600 x 400 mm Permissible weight 600 Kg Tool turret 26 positions Tool Type BT30 Microloc bench and clamping systems Chip Evacuator Accessories

Fish Slaughter and Cleaning Machine

Inv. Num. : 6594 Type: VMX 42 SR Producer: Hurco Generated: 2008 Parameters: Control system: Winmax Work table length: 1270 mm Work table width: 610 mm Maximum table load (even): 500 kg Speed: 12000 1/min Travel X-axis: 1066 mm Travel Y-axis: 610 mm Travel Z-axis: 610 mm Cone: SK40 Machine weight: 7550 kg Equipment: C-axis: CNC rotary table B-axis 2016: new spindle

Sigmatek CCL 911 C-DIAS digital bus module processor module Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. Feel free to call us.

Sigmatek CCL 912 C-DIAS digital bus module processor module Devices were used at times under favorable conditions in a test station, hardly used, mostly for testing the software when new plants were built. Price per piece. Invoice with VAT. Feel free to call us.

Control: Siemens Travel X/Y/Z: 350 x 240 x 340 mm Spindle speed 6300 min-1 Tool holder SK 40 Manual swivel rotary table Tool holder Vice Accessories

Tecnograf TECNO 100 Book Stacker Printing Print Stacker Stacking Currently in stock

Stainless steel container 1000 l Manufacturer: Willi Lermer Wiesbaden Volume 1000 l stackable 10 pcs available Very good condition, straight from production!

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 478 The usefull capacity of the BAADER 36 and 134 herring filleting machine can be increased by a combination with the BAADER 478 automatic feeder wich aligns herring, sprats, sardines and similar fish and feeds them to the processing machine. A variable-speed elevator raises the fish from a water filled hopper and delivers them uniformly to five feed channels. Fish traveling head forward are led directly to the timing device. Fish with tail leading are turned around. The timing device releases single fish synchronized wuth the processing machine and transports them through a back and belly aligning device into the feed troughs of the processing machine. It can be combined with Filleting machine for herring, sardine, Baader 134

HEADING MACHINE, BAADER 421 Technical description: Machine number: 10-4604-0421 Belt width: 300 mm Lift height: 1050 mm Estimated throughput: 35 fishes/min but varying in accordance with fish size and stillness of the operator Water consumption: 12 l/min Weight: 520 kg Dimensions: 2350 x 1600 x 1750 mm

EEL GUTTING MACHINE, BAADER TYPE: 143 Technical description: Serial number: 10-3404-0143 Power supply: 220-380 V, 3 Ph, 50 Hz, 6.5 A, 2.5 kW Clearance: 125 x 110 mm Dimensions: 3000 x 1000 x 1250 mm The BAADER 143 guts eel from 130 to 1200 g, the gutting cut is performed in the usual way. The belly cavity is cleaned by scaper, a suction scoop and a rotating brush, the machine can be adjusted for 3 size ranges. Eel support troughs, scrapers and scoops for the different size ranges can easily be exchanged.

We sell 384 x Intel Xeon Platinum 9242 processors (We can sell this including the Intel S9200WK mainboard or server) In most cases, the entire item can only be handed in completely. More information on request. In most cases, advertised products can only be sold as a complete lot. More information on request. We look forward to receiving inquiries from Germany and internationally. We have many other refurbished/used hardware available from the areas of the systems mentioned here as well as from other systems of these manufacturers: IBM, DELL, HPE, ORACLE, NETAPP, QUANTUM, STK, FUJITSU, SGI, HDS, EMC, Supermicro, BULL, NEC, CRAY, 3Com, ADVA, Alcatel, Brocade, Cisco, Enterasys, Extreme Networks, Huawei, Marconi, Nortel, Qlogic, Avaya, ORACLE Tested, tested used hardware at a reasonable price from HASCON! The sale is only made to companies. We have available complete s ...

CEPHALOPOD CUTTER WITH POSITIONING BAND, MECALSA TYPE: MC CTDP/CH200 Technical description: Material: Stainless steel Voltage: 380/440 V Frequency: 50/60 Hz Cutting pitch between blades: 40 mm

FILLETING MACHINE BAADER TPYE: 184 Technical description: Machine number: 10.3320 0184 Power supply: 380 V, 3 Ph, 50 Hz, 11.5 kW, 22.0 A Plastic conveyor belt width: 500 mm Band width: (2x) 160 mm Throughput: 24-40 pieces/min Water consumption: 25 l/min Weight: 2.500 kg Dimensions: 5400 x 1300 x 1450 mm This machine is laid out for filleting gutted and headed cod, haddock, saithe, hake, merluza and withing from 30 to 70 cm in total lenght (=0.3 to 2.5 kg, gutted including head). Proven BAADER filleting system providing for highest yield and reliability. The BAADER 184 is equipped with an integrated skinning device.

GUTTING MACHINE FOR HERRING, BALTIC HERRING, SARDINES, MACKEREL AND WHITEFISH ARENCO MODEL: CIS Technical description: Power supply: 380-440 V ? 50-60Hz Conveyor width: 260 mm Dimensions: 3600 x 900 x 1330 mm

AUTOMATIC FEEDER FOR HERRING, SARDINE, BAADER 488 Technical description: Power supply: 400 V, 50 Hz, 3 Ph Approx dimensions: 3100 x 1400 x 1900 mm It can be combined with Filleting machine for herring, sardine and mackerel Baader 35

TROUT GUTTING MACHINE BAADER, TIPO: 140 Technical description: Serial number: 74-9019-0140 Power supply: 380 V, 3 Ph, 50 Hz, 7 A Dimensions: 3050 x 550 x 1240 mm This machine is laid out for gutting trouts of a live weight from 240 to 650 g in a commercial manner. The abdominal cavity is cleanly cut open and the guts including the kidney are completely removed by means of a vacuum suction device. The special design of the BAADER 140 is capable of gutting up to 38 fish/min. The gills can either be removed or retained; this requires an easy adaption.

GRADING - WEIGHINF MACHINE MAREL, TYPE: A320 Technical description: Number of stations: 8 Feeding conveyor: 4300 x 1005 x 1970 mm, working width: 450 mm Weighing conveyor: 1900 x 750 x 1640 mm, working width: 300 mm Grading conveyor: 6200 x 1500 x 1550 mm, working width: 385 mm

GRADING - WEIGHING MACHINE, MAREL PROLINE, TIPO: GRA-PR30-04 Technical description: Serial number: A064049 Number of stations: 4 Power supply: 220/240 V - 50/60Hz Conveyor band: Intralox series 1650 ftpp b = 305 Conveyor width: 305 mm Total dimensions: 4900 x 1300 x 1650 mm

SALMON BELLY SLICER, KAJ OLESEN A/S, TYPE TRIM-UNIT Technical description: Serial number: 11-01 Power supply: 3X400 V; 3,0A Bandwidth: 590 mm Dimensions: 2600 mm X 1150 mm x 1300 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-2C Technical features: Output: up to 50 cans/minute Recommended output: 20 to 50 cans/minute (according the can type) Format: diameter 150 mm Cans height: max. 120 mm

PACKING MACHINE FOR TUNAFISH AND ANOTHER FISHES, HERFRAGA MODEL SM-110 Technical features: Output: up to 100 cans/minute Recommended output: 40 to 80 cans/minute (according the can type) Formats: 1 unit with format diameter 73mm (ID 2015) 1 unit with format diameter 99mm Others formats: diameter 65mm, 1/2 oval, 1/4 oval Cans height: 25-62mm

SEPARATOR, SEPAMATIC, TYPE: SEPA 410 Technical description: Machine number: 107 306 Drum diameter: 90 mm Includes 1 drum (to choose between different perforation diameters: 1,75mm; 2mm; 3mm; 5mm). Power supply: 400 V, 50 Hz, 6 A, 2,2 kW Capacity: up to 800 kg per hour Dimensions: 1500 x 1200 x 2850 mm Includes pallet with additional drum with holes: 3 mm, and spare parts.

FILLETING MACHINE BAADER TYPE: 208 Technical description: Output conveyor width (x2): 108 mm Power supply: 400V / 50 Hz Power: 2,6 kW Dimensions: 3750 x 1050 x 1250 mm This machine processes small gutted and headed hake, small haddock, saithe, cod and whiting. The cuts of the spring-loaded circular knives being controlled by the fish itself, the BAADER 208 produces single fillets with skin of high quality and with best yield. The BAADER 208 is easy to maintain and to operate. All functional areas are very well accessible. The machine is of robust construction and consists mainly of stainless materials so that it has a long service life also when used at sea.

HEADING AND FILLETING MACHINE FOR SALMON AND MORE, CARNITECH TYPE: CT2620 + CT2630 Technical description: Heading machine CT2620 Power supply: (3x) 400 V, 50 Hz, 8 A Machine number: 08-0081 Year: 28/08/08 Dimensions: 4200 x 2100 x 1800 mm Filleting machine CT2630 Machine number: 08-0067 Year: 18/06/08 Power supply: (3x) 400 V, 50 HZ, 11 A Dimensions: 1800 x 850 x 2000 mm CT 2620 has been designed for head and tail cutting of salmon fish from 2 to 7 kg. The product is fed to the machine via a feeding chute, after which several operations are carried out on the fish, as the round attachment rotates one quarter of a revolution for each push on the button on the operation panel, see section 3.0 for further details. During initial operation, the occiput is sawed through with a round knife, where upon a guillotine knife tilts down to cut off the head, which then lands in the waste carrier  ...

FILLETING MACHINE BAADER 35 WITH NOBBING SYSTEM (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WHITING (22-40 CM) AND OTHER PELAGICS Technical description: Serail number: 10-1363-0035 Year: 1992 Throughput: 100-200 pieces/min Dimensiones: 3300 x 1250 x 1800 mm The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483, 484 or 488. A skinning machine BAADER 55 can be attached for the produc ...

FILLETING MACHINE, BAADER 36 Technical description: Power supply: 400 V/50Hz Dimensions: 3500 X 1000 X 1700 mm - 2300 X 1000 X 1100 mm Can be combined with Automatic feeder BAADER 488 The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482, 483 or 484. A skinning machine BAADER 55 can be attached for the production of skinless herring fillets.

FILLETING MACHINE BAADER 35 (SINGLE OR BUTTERFLY FILLET) FOR HERRING (20-40 CM), MACKEREL (24-40 CM), BLUE WITHING (22-40 CM) AND OTHER PELAGICS Technical description: Machine number: 10-1363-0035 Throughput rate: 100-200 pieces/min Voltage/Power: 380 V, 3 Ph, 50 Hz, 11 A Dimensions: 3950 x 2600 x 1550 mm Weight: 835 Kg The BAADER 35 can process herring, from 20-40 cm (75-450 g), mackerel and silver smelt 24-40 cm (130-600 g), blue whiting 22-40 cm (75-350 g) as well as trout 25-38 cm (160-600 g) with all usual cuts. Amodified version for smaller herring from 17-32 cm (35-240 g) is BAADER 36. Separate drives of heading and filleting sections enable operation of the heading section as a separate machine with an optional nobbing attachment. Only on operator is required when the BAADER 35/36 is combined with the automatic feeder BAADER 482 or 484. A skinning machine BAADER 55 can be att ...

Connection IMA – HSK 63F Gear ratio 1:1 Max. speed 14,000 rpm Bore for saw blades or disc cutters 22 mm Tactile diameter. inside approx. 130 mm Note: Plastic coating probe ring is missing Sensing distance approx. 5 mm

Control uni-Pro CNC 90 Travel X/Y/Z 800/800/710 mm Speed 4500 1/min Tool magazine for 52+120 tools SK 50 Indexing table 1° 4-fold pallet changer 500x630 mm Conveyor

To order, we sell a glass edge processing machine Z. Bavelloni CR1111P as pictured and described. - Manufacturer: Z. Bavelloni - Type: CR1111P - Year of construction: 2001 - Condition: used, in need of cleaning, signs of use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VIEWING & PICK-UP BY APPOINTMENT ONLY. You can reach us by classifieds message or by phone from Mon - Fri from 8 a.m. - 4 p.m. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NO EXCHANGES OR RESERVATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . This article is from a bankruptc ...

Machine No.: 140374 Country of origin: Italy Saw blade Ø mm: up to 350 Feed speed: infinitely variable Cutting areas: see photo of the machine shield Dimensions LxWxH mm: 900x650x1650 Weight approx. kg: 750

Country of origin: Italy Saw blade Ø mm: 425 Mitre range right: 60° Mitre range left: 90° Rotational speeds m/min: 13 + 26 Weight approx. kg: 900

Country of origin: Italy Saw blade Ø mm: 425 Weight approx. kg: 900