pole used for sale

bore capacity in steel (diameter): 35.0 mm bore capacity in cast iron: 40.0 mm arm length: max. 1230 mm turning speeds: 50 - 2250 U/min spindle taper MT: 4 MK base plate: 2030 x 200 mm quill stroke: 220 mm quill feed: 0.04 - 0.40 mm/U total power requirement: 3.62 kW weight of the machine ca.: 1500 kg range L-W-H: 2100 x 1000 x 2570 mm Description - Good gliding ability of the boom thanks to the ground . surface of the outer column - Mechanical locking of the swing movement of the boom - and the headstock displacement - Easy to adjust to the fixed workpiece - Simple, central operation at the front of the machine - Optimum cutting speed thanks to a wide speed range - Quiet running thanks to stable construction - Pole-changing drive motor - automatic spindle feed (0.04/0.07/0.11/0.17/0.28/0.40 mm/rev) - 1x MEUSER clamping cube with T-slots .. 615 x 500 x 510 mm - machined base plate - orig ...

Connecting cable, connecting cable, 3 pcs FESTO NEBV-Z4WA2L-R-E-2.5-N-LE2-S1 8047679 2-pole Length: 2.5 m abel diameter: Ø 2.9 mm New ! Dimensions (packaging): 200 x 200 x 30 mm

Boring power: 32.0 mm bore capacity in cast iron: 35.0 mm morse taper: MK 3 spindle stroke: 160 mm throat: 293 mm column diameter: 115 mm table:: 400 x 500 mm turning speeds: 125 - 1050 U/min total power requirement: 0.55 / 0.80 kW weight: 200 kg range L-W-H: 625 x 950 x 1840 mm from a training workshop maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - manual spindle feed via cross handle - Work table with 2x T-slots - Pole-changing drive motor - Table height adjustment via hand crank - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103747 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Boring power: 32.0 mm bore capacity in cast iron: 35.0 mm morse taper: MK 3 spindle stroke: 120 mm throat: 260 mm column diameter: 110 mm table:: 515 x 355 mm turning speeds: 80 - 1400 U/min total power requirement: 0.7 / 1.3 kW weight: 175 kg range L-W-H: 750 x 520 x 1820 mm from a training workshop maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103754 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Empty aluminium enclosure, aluminium enclosure, 6 pcs PAGUS 50 x 45 x 31 mm width: 50 mm depth: 45 mm height: 31 mm Material: die-cast aluminium, grey lacquered with 4-pole clamping block Other quantities on request ! New !br Dimensions ( Packaging ): 140 x 55 x 70 mm

Type: BPV 40/1500 Parameters: Manufacturer: Kovosvit Holoubkov Description: Machine in very good technical condition, after overhaul. Max. grinding length 1500 mm. Max. grinding width 400 mm Max. workpiece height 500 mm. Max. grinding wheel diameter 520 mm Machine weight 12000 kg. Magnet with a very fine pole spacing (5 mm) for high holding force and the possibility of grinding even small parts. Regulation of magnet holding force. Filtermist FX 7000 double-sided extraction. Built-in lower grinding wheel dresser.

Cast iron spindle moulder saws with: - side trolley for tenoning, on pole and with flag support, with tilting guide and useful stroke of about 1500mm - Saw unit for tenoning - Spindle moulder hood with AIGNER guides - with 3-wheel drive Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Key data: 360 mm, 45 °, 110 mm

Saw motor, pole-switchable approx. 1.0 / 1.8 kW Saw blades 360 mm 6 cutting speeds : 16 / 20 / 25 m/min 32 / 40 / 50 m/min Cutting range 90 degrees with blade size 360 mm : round 110 mm flat 200 x 80 mm Weight approx. 560 kg

pole-switchable motor 1.7 / 2.2 kW Saw blade size max. 275 mm Cutting speed approx. 40 / 80 rpm Mitre infinitely variable by 90° to the left and by 90° to the right Cutting area approx. : 90° profile , square / round : 80 / 80 mm

Power distributor, energy bus distribution connection box, with connection cable WEIDMÜLLER FieldPower® Type 4X 5-pole 2.5 - 6 mm² max. 41A / 800V IP20 approx. 2.5 m Connection cable with plug used, tested ! dimensions (without cable): 185 x 105 x 70 mm Dimensions (packaging): 300 x 200 x 100 mm

Column drilling machine CORDIA type HS 30 VG Masch. No. 303.081.118 Year of manufacture approx. 1980 Drilling capacity 30 mm Spindle holder MK 3 - short quill projection 300 mm Pinol stroke 160 mm Table size 500 x 450 mm Column diameter 125 mm Spindle speed 38-1450 rpm. 12 stages Feed 0.1 - 0.2 - 0.25 mm/rev Motor power 1.5 / 1.7 / 2.3 kW Mains connection 380 volts, 50 Hz - pole-switchable main motor with 3 speeds - 4 gear stages • Tapping device • Table height adjustment via hand crank • Clamping surface at the machine base Space required: L x W x H: 700 x 550 x 2100 mm , weight: 390 kg , good condition; used

MOSCA Pallet Packing Press Automatic Pallet Packing Press, Model KPK-121-18 Year of manufacture: 1999 The control system is S7. The strapping machine is equipped with 2 strapping heads, the second strapping head can be moved laterally. The press has an upstream, walk-in centering roller conveyor with turnstile. There is another turnstile under the press, which can be used to rotate the pallet before strapping. Occupancy dimensions including pallet: Length: 1,200 mm Width: 1,200 mm Height min. 500 mm max. 1600 mm Specifications: Infinitely adjustable belt tension: 200 – 2,000 N Belt guide speed: 4.6 m/s Closure Type: Friction Weld Closure Dimensions of the control panel: Width = 1,200 m, depth = 650 mm, height = 850 mm Dimensions of the packaging press: Max. vertical clearance: 1,600 mm Max. throughput width: 1,500 mm Length of the printing plate: 1,600 mm Pr ...

Pressure switches, pressure switches MARS, ELECTRICAL SWITCHGEAR MEERANE DV 2,5/1 Pmax: 0.8 MPa ( 8 bar ) 3-pole 500 V 16 A pipe connection: G1/2 / M12 x 1.5 New, with underlays ! Dimensions: 170 x 125 x 90 mm

plate thickness: 1,5 mm roll diameter: 76 mm bending speed: 4,7/9,4 m/min total power requirement: 0,37/0,55 kW weight of the machine ca.: 160 kg dimensions of the machine ca.: 0,6 x 0,6 m Electric 380 Volt: Universal flanging machine for raising rectangular shelves on straight, round and rectangular sheet metal parts. It has two flaring rollers, which in stand at a small angle of inclination to each other. The drive takes place via a flange geared motor that regulates two speeds in a pole-reversible manner. As a special accessory is an additional device for pressing in the cams for the cam standing seam available. The bending performance refers to 400 N/mm² strength. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pressure switches, pressure switches MARS, ELECTRICAL SWITCHGEAR MEERANE DV 2,5/1 Pmax: 1.6 MPa ( 16 bar ) 3-pole 500 V 16 A pipe connection: G1/2 / M12 x 1.5 New, with underlays ! Dimensions: 170 x 125 x 90 mm

Boring power: 32.0 mm bore capacity in cast iron: 40.0 mm spindle stroke: 175 mm morse taper: MK 3 Kurzspindel throat: 320 mm column diameter: 130 mm feed: 0.1 - 0.16 - 0.25 mm/U table:: 570 x 475 mm T-slots: 2 x 224 x 14 mm turning speeds: 60 - 1600 U/min threading: M 27 / M 36 total power requirement: 1.1 / 1.8 kW weight: 530 kg range L-W-H: 570 x 960 x 1950 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - Thread cutting device up to M36 - Button for R/L running of the work spindle - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - machined base plate - 3x MK tapping quick-change chucks - separate coolant device - EMERGENCY stop button at the front - User manual (PDF) Machine link: https://mhp.logotech.de/hpm/v7/ ...

Disperser with electronic speed variation diamac d 50 Disperser with electronic speed variation diamac d 50 Like new, never used, including auger for pouring powders and raw materials. The machine is sold including the auger (price agreements will be negotiated during the negotiation phase) CONSTRUCTION FEATURES Supporting metal structure Locking system adjustable bowl with tightening straps Dust and vapor tight cover, with dust loading hopper. Hydraulic lifting via control unit incorporated in the structure Lifting piston with non-return valves and flow regulator AISI 304-316 stainless steel mixing shaft V-belt and pulley transmission Impellers Cowless type in stainless steel. Aisi 304 stainless steel or chromed Main electrical panel with driving inverter including filter and anti-interference inductance Normal or ATEX type machine side control pulpit. Industrial or AT ...

Boring power: 35.0 mm bore capacity in cast iron: 40.0 mm Center of spindle to wall or column: 345 mm bore stroke: 170 mm Size of table plate: 600 x 500 mm Speed: 40 - 1250 U/min. spindle taper MT: 3 MK feed: 0.1 - 0.16 - 0.25 mm/U voltage: 400 V Motor output: 1.0 / 1.5 KW weight of the machine ca.: 425 kg range L-W-H: 1000 x 650 x 2150 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - extended machine column - Pole-changing drive motor - automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop - Work table height adjustable using hand crank - Taper mandrel including keyless drill chuck Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9103746 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Electrical Engraving Machine HAHN & KOLB ARKOGRAF 4 Font weights with fine adjustment 40 VA Primary: 220 V AC Secondary: 1 - 8 V AC 50 Hz approx. 2,7 m power cord write electrode: approx. 0.8 m connection cable counter pole plate: approx. 0.5 m connection cable used, tested ! Dimensions ( without cable ): 180 x 170 x 100 mm

OKAMOTO PSG-63UAN Surface Grinder YOM 1986 DRO Number of automatic axes 3 Maximum grinding lenght x width 600 x 300 mm Stroke X axis 750 mm Stroke Y axis 340 mm Stroke Z axis 322 mm Table 605x300 mm Max. load on table 420 kg Grinding wheel speed 1500 rpm Grinding spindle motor power 3.7 kW Grinding wheel 355x38 mm Wheel dresser on head Yes Electro-permanent magnetic plate with small pole pitch- Yes Dimensions of magnetic plate 600 x 300 mm Lubrication tank with pump Yes Paper filtration unit Yes Total power required 7.5 kVA Dimensions 2630 x 1880 x 1850 mm Weight 2200 kg

Non-contact safety switch SICK IN30-E0407K 6034582 24 V DC range: 0.5 - 4 mm thread: M12 x 1.0 Length: 40 mm 2x nut, wrench width: 17 mm connector device plug: M12 x 1, 4-pole Material: stainless steel, PBT ( Active Area ) New ! Dimensions (sensor, without nuts): 70 x 12 x 12 mm Dimensions (packaging): 165 x 90 x 65 mm

Inductive sensor IFM ELECTRONIC IF5538 IFB3002-BPKG/US-104 10 - 36 V DC range: 2 mm thread: M12 x 1,0 Length: 44 mm 2x nut, wrench width: 17 mm connector connector: M12 x 1, 4-pole Material: brass, white bronze coated, PBT ( Active Area ) New ! Dimensions (sensor, without nuts): 44 x 12 x 12 mm Dimensions (packaging): 200 x 155 x 15 mm

Inductive sensor IFM ELECTRONIC IE5090 IFK3004BBPKG/US-104 10 - 30 V DC range: 1 mm thread: M8 x 1,0 Length: 30 mm 2x nut, wrench width: 13 mm connector connector: M12 x 1, 4-pole Material: brass, white bronze coated, LCP ( Active Surface ) New ! Dimensions (sensor, without nuts): 50 x 12 x 12 mm Dimensions (packaging): 150 x 100 x 15 mm

Inductive sensor IFM ELECTRONIC IF5775 IFK3004BBPKG/US-104 10 - 30 V DC range: 4 mm thread: M12 x 1,0 Length: 45 mm 2x Nut, Wrench width: 17 mm connector connector: M12 x 1, 4-pole Material: brass, white bronze coated, LCP ( Active Surface ) New ! dimensions (sensor, without nuts): 60 x 12 x 12 mm dimensions (packaging): 200 x 140 x 15 mm

Connecting cable, connecting cable, 4 pcs FESTO SIM-M8-3GD-2,5-PU 159420 Length: 2.5 m Electrical connection: M8 x1, 3-pole, 3-wire, box straight / open end Other quantities on request ! New ! Dimensions ( packaging ): 250 x 200 x 30 mm

Boring power: 40.0 mm bore capacity in cast iron: 50.0 mm morse taper: 4 Kurzspindel MK spindle stroke: 200 mm throat: 360 mm column diameter: 160 mm feed: 0.1 - 0.16 - 0.25 mm/U distance spindle/base plate: 1200 mm T-slots: 2 x 224 x 18 mm table:: 630 x 530 mm speeds: 60 - 1600 U/min total power requirement: 1.4 / 2.3 KW weight: 620 kg range L-W-H: 630 x 985 x 2020 mm Furnishing: - robust & stable machine construction - continuous speed adjustment - Pole-changing drive motor - electro-magnetic automatic spindle feed - One-hand feed engagement - adjustable drilling depth stop, with fine adjustment - Work table height adjustable using hand crank - machined base plate, including coolant system - Foot switch for function: spindle off - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103745 The data for this ad was created with Modu ...

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Keyless drill chuck including taper mandrel - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103759 The data for this ad was created with ModulMWS - the software solutio ...

Inductive sensor IFM ELECTRONIC IG5495 IGB3005-BPKG/US-104 10 - 30 V DC range: 5 mm thread: M18 x 1,0 Length: 35 mm 2x nut, wrench width: 24 mm connector connector: M12 x 1, 4-pole Material: brass, white bronze coated, PBT ( Active Surface ), PEI ( LED window ) New ! Dimensions ( sensor, without nuts ): 60 x 12 x 12 mm Dimensions ( packaging ): 200 x 140 x 15 mm

Inductive sensor IFM ELECTRONIC IE5266 IEB3001-BPKG/AS 10 - 30 V DC range: 1 mm thread: M8 x 1,0 Length: 35.5 mm 2x nut, wrench width: 13 mm connector connector: M12 x 1, 4-pole Material: brass, white bronze coated, PBT ( Active Surface ), PPSU ( LED window ) New ! Dimensions ( sensor, without nuts ): 50 x 8 x 8 mm dimensions ( packaging ): 150 x 100 x 10 mm

Used agitator 0.75 KW – speed adjustment 25 to 86 rpm. With truss made of aluminum profiles 45 45 mm. Electric motor Bauer 0.75 KW, 4-pole, 3 x 230/400 volts, 1420 rpm, IP65. With spur gear i = 29.2 and variable speed gear 25 to 86 rpm. This results in very high torque for highly viscous media. Shaft: Precision stainless steel shaft D20, length 1000 mm, diameter 20 mm, Material: Stainless steel 1.4571. Coupling: Rigid coupling, bare, material stainless steel 1.4571. Agitator: Double-bladed inclined blade stirrer, diameter 244mm, material stainless steel 1.4571. Wing adjustable in angle.

Double Z-Kneader / Sigma Kneader / Bucket Kneader / Trough Kneader Topos - Made by Topos, built approx. 1960 - Refurbished in 2018 - Electric motor VEM 4 / 6 KW pole-switchable, for 2 speeds 1445 / 720 rpm, 11/12 A -Belt - 2 Z-shafts - All parts that come into contact with the product are made of stainless steel - Single-walled container approx. 700 x 760 x 500 mm = approx. 250 litres - Usable volume approx. 150 litres - Floor emptying - Weight approx. 1200 kg - Overall dimensions approx. 1400 x 1500 x 1700 mm - Very stable design and very good condition

Inductive Sensor PEPPERL+FUCHS NRN10-12GH40-E2-V1 Part No. 233617 Sensing distance: 10 mm Operating voltage: 10 - 30 V DC Operating current: 0 - 200 mA Thread: M12 x 1,0 Length: 39 mm 2x nut, wrench width: 24 mm connector device plug: M12 x 1, 4-pole Material: Stainless steel 1.4404 / AISI 316L ( V4A ), LCB ( Active Area ) New ! dimensions ( proximity switch ): 55 x 12 x 12 mm dimensions ( packaging ): 180 x 120 x 15 mm

Inductive Sensor PEPPERL+FUCHS NBB0,8-5GM25-E0-V3 Part No. 134075 sensing distance: 0.8 mm Operating voltage: 10 - 30 V DC Operating current: 0 - 200 mA thread: M5 x 0.5 Length: 35 mm 2x nut, wrench size: 8 mm connection device plug: M8 x 1, 3-pole Material: Stainless Steel 1.4305 / AISI 303 ( V2A ), PBT ( Active Area ) New ! dimensions ( proximity switch ): 45 x 8 x 8 mm dimensions ( packaging ): 140 x 80 x 10 mm

Inductive Sensor PEPPERL+FUCHS 3RG4210-7AG00-PF Part No. 553854 Sensing Distance: 0.8 mm Operating voltage: 10 - 30 V DC Operating current: 0 - 200 mA thread: M5 x 0.5 Length: 35 mm 2x nut, wrench width: 7 mm connection device plug: M8 x 1, 3-pole Material: Stainless Steel 1.4305 / AISI 303 ( V2A ), PBT ( Active Area ) New ! dimensions ( proximity switch ): 38 x 8 x 8 mm dimensions ( packaging ): 140 x 80 x 10 mm

Boring power: 23.0 / 28.0 mm Boring depth max.: 140 mm Center of spindle to wall or column: 300 mm Column diameter: 125 mm Size of table plate: 415 x 385 mm Speed: 100 - 2000 U/min. spindle taper MT: 2 MK voltage: 380 V Motor output: 0.9 / 1.4 KW weight of the machine ca.: 225 kg Dimensions (L/W/H): 900 x 600 x 1960 mm maintained condition () Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle - Work table with 2x T-slots - Table height adjustment via hand crank - machined base plate with 3x T-slots - manual V-belt tension (front handwheel) - Connection cable including 16A plug Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103760 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Magnetic field sensor TURCK BIM-KST-AP6X Ident-No.: 46740 10 - 30 V DC connection: cable, 3-pole Material: metal, plastic connection cable: length approx. 2.0 m New ! Dimensions (sensor, without cable): 25 x 17 x 15 mm Dimensions (packaging): 250 x 160 x 30 mm

saw blade diameter: Ø 400 mm cutting diameter: 130 mm capacity 90 degrees: square: 120 x 120 mm capacity 90 degrees: flat: 315 x 40 mm stroke: 150 mm cutting speed: 10 - 30 m/min total power requirement: 1.8 / 2.7 kW weight of the machine ca.: 850 kg range L-W-H: 1200 x 1000 x 1700 mm Furnishing: - robust cold circular saw with powerful drive - electro-hydraulic metal circular saw - underfloor Underfloor = saw blade delivery from below - electro-hydraulic material hold-down device manual fine feed - Miter adjustment on both sides via large turntable including analogue degree display - continuous feed adjustment of the saw blade - all gears are hardened and ground - entire gearbox runs in an oil bath - all bearing points have rolling bearings - pole-changing motor - Proven guidance of the saw blade in a strong pivot bearing - Discharge roller conveyor including fastening - User manual ...

Inductive Single Position Switch, Inductive Sensor BALLUFF BES02MM BES 517-110-RK 10 - 60 V DC Reach: 2 mm Connection: Screw terminals, 4-pole Material: PA 12 ( Active Surface ), PA 12 ( Housing Material ) New ! Dimensions (sensor): 63 x 60 x 12 mm Dimensions (packaging): 140 x 80 x 20 mm

Key data: 360 mm

Specifications: Saw blade diameter or dimension 360mm Bore 50mm Mitre cuts up to 45° possible Stop with scale right 2500mm Cutting Areas 90° double T and U-profile 200 x 90 mm 45° double-T and U-profile 140 x 90 mm 90° round steel 120 mm 45° round steel 100 mm 90° square steel 110 mm Bz0turliee 45° square steel 95 mm 90° flat bar 200 x 90 mm 45° flat bar 120 x 90 mm pole-switchable motor --additional speeds by belt reversal Saw blade speeds 17/32-20/40-25/50 m/min Year of construction estimated--no nameplate available--

Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0875 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm. 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.4 and 1.8 kW pole-switchable Mains connection 380 volts, 50 Hz - Infinitely variable feed in the X- and Z-axis - Spindle speed over 2 motor speeds and 8 gear stages - Quoil displacement on the vertical milling head 60 mm - Vertical milling head swivels and 100 mm horizontally extendable - Fixed angle table 600 x 210 mm - Coolant device in the machine base - Adjacent control cabinet - Original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg very good condition; used

Mechanical single position switch, 2 pcs BALLUFF BSE0008 BSE 44.0-RK switching capacity ( DC ): 220 V DC 0.5 A, 24 V DC 4 A switching capacity ( AC ): 250 V AC 6 A, 40 - 60 Hz connection: Screw terminals, 4-pole contact system: Dual circuit changer ( one normally open and one NC, galvanically isolated ) Material: Thermoplastic ( lid, housing ), Contact material: fine silver, gold-plated New ! Dimensions ( switch ): 60 x 29 x 13 mm Dimensions ( packaging ): 140 x 80 x 20 mm

Semi-automatic tapping machine for bolt threads 6 - 72 mm, 1/4 - 23/4", pipe thread 1/16 - 21/2", 16 - 63 mm. Machine on stand. Pole-reversible three-phase motor Clockwise and counterclockwise rotation Weight: approx. 250 kg

bore capacity in steel (diameter): 16.0 / 20.0 mm throat: 240 mm bore stroke: 100 mm spindle taper: 2 MK table:: 280 x 340 mm turning speeds: 130 - 2000 U/min column diameter: 90.0 mm flute distance: 125 mm T-slots: 2 x 14.0 mm total power requirement: 0.37 / 0.70 kW weight: 125 kg range L-W-H: 500 x 600 x 1900 mm Furnishing: - manual spindle feed - including thread cutting function - continuous speed adjustment (variomatic) - Digital drilling depth display at the front - Digital speed display at the front - Work table height adjustable via hand crank & T-slots - V-belt drive - pole-changing motor - EMERGENCY stop button at the front - Front main/toggle switch - User manual (PDF) Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9103752 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mechanical Single Position Switch SIEMENS 3SE5112-0CH01 Switching capacity ( DC ): 24 V DC 3 A switching capacity ( AC ): 240 V AC 6 A, 50 - 60 Hz Umax.: 400 V Connection: Screw terminals, 4-pole contact system: one NO and one NC Material: Metal ( Enclosure ) New, with underlays ! Dimensions ( switch ): 130 x 41 x 60 mm dimensions ( packaging ): 170 x 170 x 80 mm

Connection block, 3 pcs FESTO CPX-AB-8-M8 195706 Electrical connection: M8, 3-pole, 8x socket with linking block: CPX-GE-EV 195742 Other quantities on request ! used, tested ! Dimensions ( single terminal block ): 108 x 58 x 54 mm

bore capacity in steel (diameter): 6.0 / 10.0 mm throat: 200 mm bore stroke: 60.0 mm spindle taper: B 12 table:: 280 x 260 mm turning speeds: 430 - 9000 U/min column diameter: 70,0 mm total power requirement: 0.45 / 0.60 kW weight: 95.0 kg range L-W-H: 450 x 300 x 880 mm from a vocational training center () Furnishing: - manual spindle feed - Analogue drilling depth display with mm scale - pole-changing motor - Work table with 2x T-slots height adjustable - machined base plate with 2x T-slots - Taper mandrel including keyless drill chuck - V-belt drive - ON/OFF switch, front - Connection cable + 16A plug - original instruction manual Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9093645 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pos. 2 - supply to the cooling tunnel, single-strand, equipped with cornering plastic flat-top chain, 82.5 mm wide; Scaffolding in stainless, Execution; complete with supports, railing brackets and guides as well as drive motor block in, Hollow shaft version, make SEW, type DRN®, 400/230 V, 50 Hz, IP55, energy efficiency class IE3;, the conveyor system is equipped with a pneumatic stopper/slider combination., This is how the rows are formed and pushed off., Item 3 – cooling tunnel, The system is based on a mat chain conveyor that is guided through a cooling zone., Technical specifications, Conveyor capacity: 750 pieces/h, Inlet temperature approx.: 80°C, Outlet temperature approx.: 35 °C, Average room temperature approx.: 10 °C, Cooling time approx.: 55 min, cooling belt, Usable chain width: approx. 1,200 mm, Usable chain length: approx. 4,200 mm, Inlet/outlet height: approx. 1,000 ...

saw blade diameter: 275 x 2.5 x 40 mm cutting diameter: 90.0 mm capacity 90 degrees: flat: 140 x 70 mm capacity 90 degrees: square: 80 x 80 mm capacity 45 degrees: round: 70.0 mm capacity 45 degrees: flat: 90 x 80 mm cutting speed: 40 / 80 U/min total power requirement: 1.2 / 1.4 kW weight of the machine ca.: 250 kg dimensions of the machine ca.: 900 x 750 x 1450 mm Machine from training workshop (BOSCH company) maintained condition () Furnishing: - manual cold circular saw - Column-guided saw head - one-sided miter adjustment over mounted turntable Material support table with degrees - mobile machine base - Pole-changing motor (2x cutting speeds) - manual cutting/lifting version - manual material tensioning - 1x circular saw blade - 1x material stop Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9164093 The data for this ad was created with  ...

dimensions of saw-blade: 275 mm cutting range: 80.0 mm capacity 90 degrees: square: 70 x 70 mm capacity 45 degrees: round: 80.0 mm capacity 45 degrees: square: 60 x 60 mm work height max.: 900 mm saw blade turning speeds: 20 / 40 U/min engine output: 1400 / 2800 U/min. total power requirement: 1.1 kW weight: 175 kg range L-W-H: 550 x 950 x 1800 mm Furnishing : - manual cross-cut/cold circular saw - for cutting profiles, pipes, solid materials - manual vice with star handle - including miter adjustment - ergonomic control handle - Pole-changing drive motor - Machine base Machine link: https://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=100 8-9164098 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Univ. tool milling machine DECKEL type FP 1 Masch. No. 2101 - 0778 Year of construction 1979 Manual travel X: 300 mm Y: 160 mm Z: 330 mm Table size 600 x 210 mm Spindle holder SK 40 - S20x2 Spindle speed 40-2000 rpm 16 steps Feed X and Y axis 5 to 500 mm/min. Rapid traverse 1200 mm/min. Motor power 1.5 and 1.9 kW pole-switchable Mains connection 380 volts, 50 Hz - stepless feed in the X- and Z-axis - spindle speed over 2 motor speeds and 8 gear stages - quill displacement on the vertical milling head 60 mm - vertical milling head swivel and 100 mm horizontally extendable - fixed angle table 600 x 210 mm - coolant device in the machine base - adjacent control cabinet - original chip tray for placing on the machine base - Electrical plan available Space requirements L x W x H 1350 x 1100 x 1700 mm Weight 770 kg good condition; used