pneumatic punching machine used for sale

Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Airtec Pneumatic: XL-040-0125-050 -Stroke: 125 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 53/53/H325 mm -Weight: 1.5 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 275 mm -Piston diameter: 50 mm -Piston rod: Ø 20 mm -Number: 1x available -Price: per piece -Dimensions: 65/65/H530 mm -Weight: 4.85 kg

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, tie rod cylinder -Stroke: 260 mm -Piston diameter: 80 mm -Piston rod: 18 mm -Total length: 610 mm -Total length extended: 870 mm -Weight: 6.55 kg/piece

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 220 mm (limited) -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 555 mm -Total length extended: 775 mm -Number: 2x available -Price: per piece -Dimensions: 95/95/H555 mm -Weight: 6.45 kg/piece

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 100 mm -Piston diameter: 80 mm -Piston rod: Ø 25 mm -Total length: 320 mm -Total length extended: 420 mm -Number: 2x available -Price: per piece -Dimensions: 96/96/H320 mm -Weight: 4.35 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp, -Stroke: 100 mm -Piston: Ø 50 mm -Piston rod: Ø 18 mm -Total length: 340 mm -Total length extended: 440 mm -Dimensions: 66/66/H340 mm -Weight: 2.1 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 100 mm -Piston: Ø 32 mm -Piston rod: Ø 12 mm -Total length: 290 mm -Total length extended: 390 mm -Dimensions: 48/48/H290 mm -Weight: 0.9 kg

Pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 245 mm -Total length extended: 325 mm -Dimensions: 54/54/H245 mm -Weight: 1.1 kg

Short-stroke cylinders, pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 50 mm -Piston: Ø 50 mm -Piston rod: Ø 16 mm -Number: 2x available -Price: per piece -Dimensions: 65/70/H95 mm -Weight: 0.65 kg

Pneumatic cylinders, air cylinders, pneumatic stamps, air stamps, standard cylinders -Stroke: 250 mm -Piston diameter: 80 mm -Piston rod: 25 mm -Total length: 570 mm -Total length extended: 820 mm -Number: 4x available -Price: per piece -Dimensions: 96/96/H570 mm -Weight: 6.4 kg

Pneumatic rotary table press make -No: SCHÜCO type Pneumatic 297 838Fabr. -No: 1293, built in 1992Technical specifications:Press force: 35 kNMax. Operating pressure: 8 barLifting height approx .: 12 mmReceiving opening approx .: 134 mmpossible strokes per minute: see videoExternal dimensions approx .: 800 x 800 x 1400 mmMax. Weight: 150 kgWith- a lot of Schüco punching tools (Photos of all punching tools available)- round plate- underframeused, in very good and functional conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

- Pneumatic Nietzange Model CP 0351 ESVEL Compression Riveter by Chicago Pneumatic Used

pneumatic corner drill, compressed air drill, compressed air angle drill, corner drill -Manufacturer: Chicago Pneumatic, pneumatic angle drill -Type: CP-0323-TANAR -Operating pressure: 6.2 bar max. -Speed: 175 rpm -Dimensions: 790/260/H110 mm -Weight: 11 kg

Pneumatic screwdriver, pneumatic screwdriver DESOUTTER Pneumatic screwdriver, rod screwdriver for screwdriving technology type SD 140-AR510-S4Q Torque range: 0.6-14.0 Nm Speed: max. 510 rpm. Compressed air requirement: 6 bar Air consumption: 8.7 l/s Bit absorption: M6 - Rotary switch for clockwise and counterclockwise rotation (rotary bezel control) - without screwdriver switch-off - Compressed air control line 4 mm - Compressed air connection for screwdriver function min. 10 mm - Aluminium bracket for handling device - Screw feeder 12 mm (inner diameter) Dimensions L x W x H 60 x 46 x 870 mm Weight: 2.8 kg good condition 3 pieces available, price per screwdriver; used

Pneumatic press, air press BOSCH Type 0840 002 002 Fabr. No. 041 Year of construction 1980 Compressive force 18 KN = 1.8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 bar outreach 100 mm ram stroke 70 mm Table surface 245 x 200 Ram surface 45 mm Installation height max. 235 mm Clamping pin bore 20 mm with clamping screw Compressed air requirement 5 bar - Pressing force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger height adjustable by 90 mm- pneumatic 2-hand operation - mounted on metal base with wooden plates Space requirement L x W x H 1050 x 700 x 1600 mm Weight pneumatic press 82 kg Weight with table base 140 kg good condition; used

Name: Sprout punch Manufacturer: Schleicher, 8192 Gerelsried/Obb. Machine number: 8922 Year of construction: 1985 Condition: used, completely revised and tested - pneumatically operated rung punch - working height (cutting height): approx. 150 mm - working width (cutting width): approx. 120 mm - Width (incl. table extensions): 1520 mm - Depth: 600 mm - Height: 1120 mm - Two-hand operation - with angle stop - with length display (ruler) - with adjustable supports for processing palatine strips - Compressed air connection: 5 bar - dust-free working - Table extension left + right (removable) - Stops left + right removable - adjustable for single miter 90° and double miter 45° - 1 x sliding stop Transport dimensions (W x D x H): 1520 x 700 x 1370 mm on pallet Weight: 95 kg (incl. pallet) (Changes and errors regarding technical data and prices excepted!) In ...

Description: Control unit type ZHS-2/64 Nominal pressing force: 100 kN max. Nominal pressure: 6.5 bar Overrun time: 60 m sec Overtravel: 12 mm Safety distance: 110 mm weight approx.: 598 kg, Approx. Onsite Dimension. (l x w x h): 800 x 1,250 x 2,100 mm

Stanze PAGUS Stanze punching force approx. 4000 kg installation height approx. 200 mm projection: approx. 380 mm table 300 x 300 mm 380 V used, tested ! Dimensions: 1000 x 920 x 1550 mm

Punching tool with Linar built-in punching brackets ABS-SCHWABE type 100/160 11 punching brackets, punching unit Year of construction approx. 1990 Projection: 160 mm Punching capacity: 0.3 to 5 mm Material thickness Hole diameter: 2 to 7 mm Installation height: 203 mm (only the punching bracket individually with punching tool) Built-in is a round hole tool ø 5 mm Punching bracket spacing: 195 mm - the tool unit was mounted on a hydraulic press brakeDimensions of punching bracket base plate L x W x H: 2500 x 345 x 37.5 mm Dimensions of punching bracket pressure plate L x W x H: 2500 x 173 x 20 mm Overall dimensionsL x W x H: 2500 x 345 x 300 Weight: 400 kg good condition; used

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket projection 210 mm with punching tool -Punching capacity: 3mm -Matrix: Ø 34 mm -Punching tool: Ø 10 mm -Dimensions: 320/45/H150 mm -Weight: 6.8 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 160 -Throw: 110 mm -Punching capacity: 3mm -Matrix: Ø 43 mm -Dimensions: 225/60/H150 mm -Weight: 6.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: SUPRA, punching bracket GN4 type PA80 400 with punching tool -Throat: 400 mm -Punching capacity: mm -Matrix: Ø 75 mm -Dimensions: 570/120/H140 mm -Weight: 27.6 kg

Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket -Manufacturer: Raskin, punching bracket type 25 BL 260 with punching tool -Throat: 210 mm -Punching capacity: 3mm -Matrix: Ø 42 mm -Punching tool: Ø 18 mm -Dimensions: 330/60/H150 mm -Weight: 9.4 kg

We can offer a complete French fries production line which manufactured by K&K,Netherlands in 2012, capacity is 1500kg/h. stopped,working condition, serious buyer cOntact us.

Pneumatic rebate bending machine FASTI Type 606 - 11 - 1.0 Folding machine for sheet metal folding Pre-bending For making a rebate bend Fabr. No. 9166002 Year of construction 1991 Working length: 1100 mm Material thickness at 45 kg/mm² 1 mm compressed air requirement 6 bar - pneum. Foot switch roller lining via threaded toggle screws Space requirement L x W x H 1600 x 300 x 1050 mm Weight approx. 250 kg good condition The fold is the doubling of the sheet in the edge area, i.e. 1x turned over to increase the rigidity of the sheet. The envelope creates a rounded edge, which reduces the risk of injury by cutting at the sharp edge of the sheet. Ideal for sheet metal processing of sheet metal furniture, cladding panels or for ventilation and silencer construction.; used

Code: 0168 Brand: STROMAB Model: ST 3000 - CE Standard Rotating pneumatic clamping machine, suitable for planks in general, squared timbers, strips for forming panels, table tops, steps for stairs and coffin - CE Standard Motorized rotation with release pedal and handy control wheel for worktable rotation Working capacity 3000 x 1200 mm Nr. 9 pneumatic front pressers ( 3 each side) Nr. 18 vertical columns with cylinder, diameter 80 mm ( 6 each side) Nr. 3 Working stations Thrust of vertical cylinder 8 bar kg 400 Daily output (8 hours) m2 263 Mechanical safety barriers Overall dimensions : mm 4800 x 2850 x 2300 Weight kg 1100

Pneumatic angle grinder with lever valve, pneumatic grinder SPITZNAS Type 1 1834 0010 12200 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22,2 mm spindle thread: M12 x 1.75 with jaw coupling and tool lubricator used, checked! Illustration may differ ! Dimensions (without hose): 400 x 150 x 160 mm

Pneumatic angle grinder with rotary valve, pneumatic grinder SPITZNAS Type 1 2035 0010 8500 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 180 mm inner diameter: Ø 22,2 mm spindle thread: Ø 15.7 mm, pitch approx. 2.5 with claw coupling used, checked! Illustration may differ ! Dimensions: 430 x 180 x 200 mm

Pneumatic angle grinder with lever valve, pneumatic grinder SPITZNAS Type 1 2122 0010 5100 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 300 mm inner diameter: Ø 22,2 mm spindle thread: Ø 15.7 mm, pitch approx. 2.5 with claw coupling used, checked! Illustration may differ ! Dimensions: 440 x 220 x 280 mm

Pneumatic angle grinder with lever valve, pneumatic grinder SPITZNAS Type 1 3538 0110 13000 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22,2 mm spindle thread: M14 x 2.0 with jaw coupling and tool lubricators used, checked! Illustration may differ ! Dimensions ( without hose): 280 x 200 x 110 mm

Pneumatic angle grinder with rotary valve, pneumatic grinder SPITZNAS S100R-508 12200 rpm Operating pressure: 6 bar Grinding wheel diameter: Ø 125 mm inner diameter: Ø 22,2 mm with claw coupling and tool lubricators used, tested ! Picture may differ ! Dimensions: 300 x 220 x 150 mm

Pneumatic Blind Riveter, Blind Riveter AVDEL LTD. Type 727 3/15 - 4.76 mm used, tested ! Dimensions: 530 x 230 x 80 mm

Suitable for cutting fruit and vegetables, speed: 400-600 cycle/h, compressed air supply: 6-8bar.

Suitable for cutting fruit and vegetables, speed: 400-600 cycle/h, compressed air supply: 6-8bar.

Operating modes: Automatic (at regular intervals) and pedal control. Volume range: 200ml-5000mm, material of product contact parts: AISI 316 stainless steel.

Description: Machine number: PWA Speed: 400 rpm Compressed air connection: 6 - 8 bar Projection: approx. 600 mm Incl. various cutting heads weight approx.: 30 kg, Approx. Onsite Dimension. (l x w x h): 600 x 500 x 700 mm

Description: Pneumatic strapping tool for plastic or polyester PP / PET straps from 13 mm up to a maximum of 19 mm, strap thickness: min 0.6 max 1.2. mm. Very easy to use, very reliable and economical. The strapping tool is equipped with a considerable traction power (max 270 Kg), with which it is possible to strap boxes, pallets, packaging in general also vertically or laterally. In fact, the comfortable grip allows you to work even in the presence of irregular packs, very high or very long pallets. Just insert the two edges of the strap into the strapping mouth, activate the retraction button and finally the welding button (by vibration). A strapping practically impossible to reopen is created (max 85%). Air pressure: 6-7 Bar / 85-100 PSI. Weight: 3,7 Kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 200 x ...

Description: Pneumatic strapping tool for plastic or polyester PP / PET straps from 13 mm up to a maximum of 19 mm, strap thickness: min 0.6 max 1.2. mm. Very easy to use, very reliable and economical. The strapping tool is equipped with a considerable traction power (max 270 Kg), with which it is possible to strap boxes, pallets, packaging in general also vertically or laterally. In fact, the comfortable grip allows you to work even in the presence of irregular packs, very high or very long pallets. Just insert the two edges of the strap into the strapping mouth, activate the retraction button and finally the welding button (by vibration). A strapping practically impossible to reopen is created (max 85%). Air pressure: 6-7 Bar / 85-100 PSI. Weight: 3,7 Kg. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 380 x 200 x ...

Pneumatic conveyor (working pressure: 1 bar) with 600 l capacity in mild steel. With inbuilt bin-type scale BW3 (250 kg/batch), slide, swivel slider, rotary-vane feeder DK 4/200, weighing cell and ventilation., Without electrical switchgear cabinet.

Pneumatic valve DN 300 Manufacturer: Jaudt Dosiertechnik Maschinenfabrik GmbH Type: Varioschieber FSV Opening width mm: ø 350 Height mm: 130 Max.Working temp. ° C: 80 Operating pressure MPa: 0.6-1.0 maximum operating pressure MPa: 0 Control voltage V: -. Housing: one-piece cast housing in flange version the round face with coarse good Chicane Sealing: slide sheet implementation for with Adjustable stuffing seal Pressure piece from cast aluminium alloy Blade: Stainless steel 1.4301 Slide sheet: eccentric screws galvanized Finish: Stainless steel and aluminum parts blank Grey cast iron housing painted in RAL 9006 Steel parts zinc plated, 10 & #956; m Plate made of aluminium Housing material: Cast aluminium alloy (AlSi 10 mg) shock-proof up to 5 bar Flanschbohrbild: According to DIN 2501 PN 6 Packing material: ARAMIDE (Tmax 280 ° C) Operation: pneu ...

Thread cutting capacity: M 3 - M 12 Speed: 400 rpm Air demand: 750 l/min Pressure: 6 - 7 bar Extension: 950 mm Standard accessories: Parallel arm Air motor 6 pcs safety slip couplings of your choice guide column with mounting flange Radial boom Maintenance Pneumatic oil for initial filling

Mobile pneumatic conveyor unit for powdery products, on base frame, with stainless steel feeding hopper (700 mm x 700 mm, incl. safety grid inside), blow-through rotary vane in stainless steel (200 mm Ø, 0,55 kW drive) by Seeger, Aerzener GMA-blower incl. Drive, air filter, compensation tank and switchgear cabinet.

Rotary actuator DW100, DIN, F07/10, 8kt. 17, ATEX pneumatic, double acting Manufacturer: End fittings Type: ED621002/AX Serial No.: 534623 / 41977 According to Directive 94/9/EC (ATEX) The Max Media and ambient temperatures may following individual temperature classes Values do not exceed: 65 ° C at temperature class 6 80 ° C at temperature class 5

Single acting pneumatic actuator, type it 350 Spring Kit Nr. 4 Function: Federkraftschließend Manufacturer: El-o-matic (today: Emerson) Type: ES0350H1A04A00N0 Serial No.: 4220206001055 Pressure: maximum 8 bar (116 PSI) Max./min. temperature: 80 ° C / - 20 ° C Drives are as good as new, as they are still unused! New price: 563,84

2 piece Pneumatic slide valves DN 200, PN 10, with purging connection, AISI 316Ti with solenoid valve. Unit price, negotiable.

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price! (Changes and errors to technical data and prices reserve ...

Used pneumatic press for cheese made by Spomasz Rzeszow. New 2006. Available 2 pcs.