plate roll used for sale

Sahinler 4R HSS 25-380 4 rolls plate rolling machine Working length : 2500 mm Maximum thickness : 30 mm

Reconditioned 3 rolls bending machine Maximum lenth: 2500mm, Maximum thickness: 15mm, Minimum rase: 300mm.

Sertom 3000 mm x 6 mm Plate rolling machine Mechanical Plate rolling machine Year 1968

Turkish 70 mm thickness 3 rolls plate rolling machine Machine is in excellent condition Bending length : 3000 mm Bending thickness : 70 mm Lifting system Pre bending Diameter of top roll : 700 mm PLC Control

Bendmak APAS 360 hydraulic plate rolling machine Machine is in excellent condition Maximum thickness : 25 mm Top roll diameter : 350 mm

Working length : 2000 mm Maximum thickness : 10 mm Machine is in good condition http://www.akyapak.tr/kataloglar/01-Bending(TR-EN-Web).pdf

Sahinler 4R HSS 30-400 Plate Rolling Machine Bending length : 3100 mm Maximum bending thickness : 30 mm Upper roll diameter : 400 mm Machine is in good condition

Machine is like new Working length : 2050 mm Max. thickness : 10 mm

Working width : 2500 mm Max. thickness : 48 mm Upper roll Ø : 470 mm Lower/lateral roll Ø : 450 mm

Comal Alpha 160/20 2050 Plate Rolling Machine Machine can be seen under power

Oztas SMR-S 2070 x 170 3 rolls plate rolling machine Machine is like new condition

Sahinler 4RHSS 32-350 Plate rolling machine - 4 rolls Machine is in good condition Side supports Lifting system NC Control

Birlik 3 Rolls Plate Rolling Machine Machine is in very good condition Bending length : 3030 mm Bending capacity : 6 mm Roll diameter : 220 mm Power : 5,5+3 Kw

Manufacturer SMT-Pullmax Kumla Model PV 7 H Year 1982 Working length : 3000 mm Max. thickness : 25 mm

Cylinder faction 4 rollers and width 2 mtr. The machine is located in Spain.

Plate rolling machine - 4 rolls Manufacturer Boldrini Model / capacity 250046 mm Year 1977

Sahinler 4R HS 30-260 4 rolls plate rolling machine Conical bending is also possible Maximum thickness : 15 mm

Sahinler 4R HSS 20-460 Hydraulic 4 rolls plate rolling machine

Sahinler 4R HS 30-260 4 rolls plate rolling machine Machine is in good condition

Onaran 3000 mm x 40 mm 4 Rolls Plate Rolling Machine Roll diameter : 400 mm Bending thickness : Up to 40 mm Bending length : 3000 mm Hydraulic side supports All maintenance has been done Machine is in very good condition

Bendmak APAS 360 4 rolls plate rolling machine Working length : 3100 mm Maximum thickness : 40 mm Machine is in excellent condition

Akyapak AHS 20/16 4 Rolls Plate Rolling Machine Max thickness : 20 mm Working length : 2100 mm

Akyapak AHS 8/10x2100 4 rolls plate rolling machine Machine is in good working condition

Durma HRB 4-3025 CNC Plate Rolling Machine Machine is in good working condition

Sahinler 4R HS 20-150 4 rolls plate rolling machine Working length : 2050 mm Machine is in good working condition

Tangential grinding Kent brand Model KSG63-FD1 Table 300x600mm Availability: starting from April 2024 Year 2000

Used Faccin 2621 b3 Plate rolling machine Used machine visible in Italy, sold as it is

Working length 2050 mm Maximum sheet thickness 4 mm Roller diameter 140 mm

Machine in good technical condition. Machine weight: 5300 kg Max. circling length: 2000 mm Max. sheet thickness: 12 mm Diameter of the upper cylinder: 220 mm Diameter of the lower cylinder: 200 mm Encircling speed: 6.2 mm/min

Capacity: 4250 x 8mm Hydraulic drive on the main role 3 roll driven Digital reading on the clamp and bending roller

The machine is in good technical condition. Max. length of circled sheet: 2000mm Max. thickness of circled sheet: 4mm It is fully functional and without defects. It is quiet and fairly accurate. By prior arrangement, the possibility of a tour in progress.

UBR32x2500 sheet metal rolling mill Year of production 1969 Dismantling, transport and all related costs are the responsibility of the buyer

Disma Model 13-TLS motorized cylinder with 1050mm tempered roller. Rollers diameter 90mm. Voltage 3PH/380V

v.v. CNC control system; foot pedal; remote control; Hydraulically adjustable

-Electric roller roller, -Retractable top roller. -Thickness adjustable. -Plate clamp manually operated. -With foot control and emergency stop

Equipped with manual control

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Older four-roll round bending machine make unknownTechnical specifications:Working length: 1000 mmRoll diameter: 100 mmmax.sheet thickness: 3-4 mmExternal dimensions L x W x H: 2550 x 1250 x 1250 mmWith:- Swiveling top rollerusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Four-roller bending machine make FACCIN type 4 HCI/V2100X6/4Ser-No: 87100480-0526Technical specifications:max. bending length: 2100 mmBending sheet thickness: 6.0 mmRoller diameter: 185mmDrive power: 5.5 kWWeight approx.: 6000 kgDimensions approx.: 1500 x 1500 x 4000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Bending Machine Fabr. FASTI Type 104-20-1Machine -No: 9314008 Year 1993Effective length: 2040 mmSheet thickness: 1.0 mmRoll diameter: 80 mmMotor power: 1,1 kWWeight approx: 660 kgWith- CNC Control- 4 different cambered rollersxa0xa0 for extremely precise tube productionused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

3-roll bending machine make SCHÄFER type SRMVS 1500/13Masch. -No: 3522 1500/15 / 8,5 / 7 built in 1971Bending length: 1540 mmMax. Sheet thickness: 13 mmBending capacity ST / VA: 8.5 / 7.0 mmRoll diameter: 200 mmExternal dimensions approx. 4000 x 1300 x 1900 mmWeight approx. 5,0 tWith- 3 rollers driven- all 3 rollers mot. adjustable- Mot. obliquely adjustable bottom rollers- suitable for conical bending- Folding bearing mounting by hand- sep. mobile control panelused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Heavy, older motorized three-roll bending machine Fab. UNKNOWNTechnical specifications:Working length: 1500 mmMax. Bending strength: 5.0 mmRoller diameter: 145/130/165 mmlower roller with grooves spaced: 50 mm apartDrive power: 5.0 kWWeight approx: 1.0 tExternal dimensions approx .: 2600 x 1250 x 1400 mmWith- swiveling top roller- Emergency stop switch- R + L run- Conical roundsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Three-roll bending machine make MG type MG 108 AMachine -No: 01226 built in 2002Technical specifications:max. bending length: 1050 mmSheet thickness max.: 12 mmSheet thickness max.: 8 mm for NiRoTop roller diameter: 140 mmBottom roll diameter: 140 mmMin drm. 230mm at :5mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Roller bench Material thickness 1 mm Usable length 1,275 m Weight 200 kg

- min/ max bending thickness 10/60 mm - bending width 4500 mm - weight of bending rolls 172 t - dimensions L11,19 x W5,08 x H5,6 m

Max. width: 3200 mm Nominal width: 3050 mm Max. thickness width: 40 mm Min. thickness width: 12 mm Max. material speed: 12 m/min Work rolls: -Units: 7 -Diameter: 340 mm Backup rolls: -Units: 5 -Diameter: 340 mm Supporting rolls: -Units: 15 -Diameter: 334 mm Diameter of feed and eccentric rolls: 380 mm Electrical motor: 132 kW Floor space: -Length: 3657 mm -Width: 5486 mm -Height: 3048 Total weight:105 tons

New OSTAS SMR-S 1270x190 mm sheet rolling mill The SMR-S models are one of the most popular metalworking solutions for light to medium duty applications; this is due to their robust body and the driving of the upper and lower rollers by electric motors. STANDARD EQUIPMENT and TECHNICAL SPECIFICATION • Precisely matched shafts made of high-grade steel SAE 1050 (CK-45) • Spiral reducer with chain and belt drive and wheels gears driving the upper and lower rollers • Machine body made of ST-52 steel • Rear roller motor • Manual top roll opening • Roller for conical bending • Top roller support system • Centralized lubrication system • Mobile electric control panel • Compliant with CE standards • User manual SPECIAL EQUIPMENT • Stepless speed regulation • Digital display for rear roller • Rear roller dr ...

Turkish made 3000 mm x 10 mm plate rolling machine 3 rolls Maximum bending thickness : 10 mm

hydraulic cylinder 2011 brand MG four mod rollers with control panel. MH-345 G 3100 mm long, 45 mm curved veneer and 35 mm thick pre-curved, steel with a yield strength of 260 N / mm2, equipped with hardened rollers, control panel with 2 displays, dimension attached to the machine and hydraulic curved device conical. Bending length: 3100 mm Bending capacity: 45mm Pre-bending capacity: 35mm Top roller diameter: 480mm Bottom roller diameter: 440mm Side roller diameter: 370 mm Power: 40 HP Approximate weight: 29,000 kg. Overall length: 6140 mm Width: 2695 mm Height: 2450 mm Working height: 1860 mm The maximum capacities refer to the ferrule diameter equal to or greater than 3 times the diameter of the top roll to yield materials in the range = 260 N / mm.