We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
121,864 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
cutting range for steel to: 20,0 Trennschnitt mm cutting range for steel to: 15,0 Qualitätsschnitt mm capacity at 100%: 60 A cutting medium: Druckluft Air consumption: 160 lt/min. bei 5 bar l/min. range L-W-H: 480 x 540 x 920 mm weight: 75 kg Description: - Plasma gas: compressed air - Plasma torch with single connection - high frequency ignition - thermal overload protection - very robust and reliable design - The plasma cutting device JÄCKLE Plasma 60 shines with a very good Price-performance ratio. - This plasma cutter is the ideal system for craft, agriculture, Automotive industry etc ., Furnishing: - with burner model P 70/6 mtr. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Plasma cutting "CR" 6000x2500 with two Hyperterm HT 2000 and HD 3070 generators complete with filter
used
CNC Portal Plasma Cutting Machine Manufacturer: Lind Cutting Type: King P4000 Year of construction: 2017 CNC control Track width: 4,000 mm Running track length: approx. 15 m Working area: 2800 x 12000 mm without suction table 1 x Plasma chamfer unit Pro Cut 2D-N Power source Kjellberg HiFocus 440i Filter system Kompac Air 325 660 4x4/o 18.50 KW
used
The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...
used
AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...
used
ECKERT Szafir II thick plate burner for sale sectional work table with extraction 3000 x 4500 cutting range 6-180 mm
used
Ajan 12000 mm x 3000 mm Plasma and Oxygen Cutting Machine Machine is in good working condition
used
Ajan PP 260 A Plasma Cutting Machine Machine is in good condition
used
Alfhatech HPR260XD Plasma Cutting Machine Sheet Metal Size : 3000x120000 260 Amper Power Source : Hypertherm Machine got serviced 8 months ago
used
Ajan 12000 mm x 3000 mm Plasma Cutting Machine All maintenance has been done by authorized service Cutting table : 12000 mm x 3000 mm 4 axis
used
Ajan PL-OC 30140 Plasma Cutting Machine HPR 260 Machine is in good working condition
used
Ajan 12000 mm x 3000 mm oxygen and plasma cutting machine like new condition 260 Amper Machine has been used approximately 1 month It is like new condition Pipe cutting tools can be connected to the machine
used
Ajan 6000 mm x 2000 mm Plasma and Oxygen Cutting Machine 130 Amper 6000 mm x 2000 mm Maintenance has been done Machine also has oxygen cutting feature Machine is in good working condition
used
Durma PL-C2060 Plasma Cutting Machine 6000 mm x 2000 mm Machine is in good working condition
used
Ajan 20006000 mm Plasma Cutting Machine Machine is like new condition, only 2 months used
used
Ermak EPL 2080 Plasma Cutting Machine 2000X8000 mm Machine is in good condition
used
Machine has been fully revised in January 2023 Machine is like new condition
used
Ajan 2000 x 6000 mm Plasma and oxygen cutting machine Machine is in good working condition
used
Ajan PP 260 A Plasma and Oxygen Cutting Machine 260 Amper Table size : 3000x9000mm
used
Ajan PP 260 A Plasma Cutting Machine Cutting length : 12000x3000 Machine is in good condition
used
plasma cutting 3000x1500 mm - steel thickness max 2 mm with 1 new Thermal Dynamics generator of 6 months
used
Ajan PP 260 A Plasma Oxygen Cutting Machine 3000 mm x 12000 mm 260 Amper Machine is in good condition
used
Durma PL-C 3060 oxygen and plasma cutting machine 3000x6000
used
with 2 hypertherm 120A high definition plasma sources, pipe cutting device, exhausting table and filter all included... 3x6m size
used
Ajan PP 260 A Plasma Cutting Machine Table size : 3000 mm x 12000 mm Pipe cutting unit up to 600 mm diameter 260 Amper 4 axis head Jet filter OXY Fuel Unit All maintenance has been done by authorized service
used
SATO SATRONIK D 5000 gas cutter Machine in good condition Its in production
used
Gas cutter with low mileage It was dismantled by Eckert
used
Nukon 8000 mm x 3000 mm Plasma cutting machine 130 Amper Machine is in good condition
used
Ajan 12000 mm x 3000 mm Plasma Cutting Machine 260A Machine is in good working condition
used
Hypertherm HPR260 plasma cutting machine Description Plasma cutting table 6000x2500 Source Hypertherm HPR260 Digital control: Hypertherm Hypertherm z-axis control head with chamfer capability. Possibility of drilling a beam next to the table
used
Ajan 12000 mm x 4000 mm plasma and oxygen cutting machine All maintenance has been done regularly by Ajan authorized service 2 pieces jet filter are included Machine is in good working condition
used
CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: HS 4001.25 P Year of construction: 2003 CNC control: MSNC500P Working range: 2500 x 4000 mm 1 plasma torch with power source Kjellberg HiFocus 100 Filter system Kemper 8000
used
with new (2019) Burny Lincoln Phantom II touchscreen control Burny 8 software center-center rail: 5000 mm cuttingwidth: 4000 mm 3 gas cutting heads, each adjustable in height Cutting table not included Longitudinal travel X-axis: 18 meter Cross travel Y-axis: 5 meter Gas cutter: 3x Read-out / Control: Burny 8 Lincoln Phantom II
used
Ajan 3000 x 12000 mm Plasma Cutting Machine 260 A Machine is in good condition
used
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Omnimat L5000 Year of construction: 2000 CNC control: Fanuc Working area: 3000 x 6000 mm Extension possible 1 plasma torch with Hypertherm HT2000 power source 3 oxy-fuel burners without table without filter
used
Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head
used
Oxycutting gantry Brand: SATO Model: SATRONIK HD 8000 8 Oxycutting torches (2 TRIPLEX torches) SATO control with gas console. Year: 2000 Useful cutting capacity: 6,000x24,000mm
used
Specifications: - Pipe diameter B 20 to 1200 mm - x – axis 3000 mm - Y - axis 1500 mm - Oxy-fuel + plasma operation - Plasma cutter Kjellberg PA – S40 CNC - mot. driven container turning device - Plant is mounted on steel plate - Space requirement approx. L 6000 x W 2900 x H 2900 mm - Weight approx. 10000 kg
new
cutting range for steel to: 25,0 Trennschnitt mm cutting range for steel to: 20,0 Qualitätsschnitt mm capacity at 100%: 25,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,9 KW voltage: 230 V range L-W-H: 505 x 147 x 305 mm weight: 8,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The AVALON 40.1 PFC is a light, handy plasma cutting system with high Cutting performance and top cutting quality. Their light weight and ease of use Handling makes them the ideal candidate for trade, workshop and industry. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing ...
new
cutting range for steel to: 18,0 Trennschnitt mm cutting range for steel to: 14,0 Qualitätsschnitt mm capacity at 100%: 30,0 Ampere cutting medium: Druckluft output: von 20 - 40 Ampere output: Eingang 4,7 KW voltage: 230 V range L-W-H: 480 x 210 x 340 mm weight: 17,9 kg Cuts carbon steel, stainless steel, aluminum, copper and more... The air plasma cutting system Avalon 40.1 Air with integrated compressor is Your reliable partner for demanding applications. Run with the Avalon 40.1 Air cuts up to a material thickness of 18 mm. Properties: - IGBT technology - Active PFC technology for high duty cycle and energy efficiency - Manual switch to activate airflow - to set the test air pressure without having to trigger the burner. - Lightweight and compact - Intelligent protection function protects the plasma torch from damage - such as incorrect air pressure, missing consumables, pilot arc o ...
new
cutting range for steel to: 35,0 Trennschnitt mm cutting range for steel to: 25,0 Qualitätsschnitt mm capacity at 100%: 61,0 Ampere cutting medium: Druckluft output: von 20 - 65 Ampere output: Eingang 7,8 KW voltage: 400 V range L-W-H: 595 x 250 x 890 mm weight: 24,0 kg Cuts carbon steel, stainless steel, aluminum, copper and more... Cutting - clean and reliable. The air plasma cutting system Avalon 65 Air with integrated compressor is your reliable partner for the demanding use. Make slitting cuts up to with the Avalon 65 Air a material thickness of 35 mm. Properties: - IGBT technology - with integrated compressor - Microprocessor control system for excellent and dynamic arcing properties - CNC connection interface - HF-free arc ignition for increased reliability and low EMF exposure - Manual airflow activation switch to test air pressure set without firing the burner - Intelligent ...
used
CNC Plasma Cutting Machine Manufacturer: Messer Type: Metalmaster 3015 CNC control: Global Control S Year of construction: 2011 Retrofit 2019 Working range: 1,500 x 3,000 mm 1 plasma torch with power source Kjellberg HiFocus 280i
used
CNC Portal Plasma Cutting Machine Manufacturer: Messer Type: Multitherm 4000 CNC control: Global Control Plus Year of construction: 2008 Retrofit: 2019 Suction table: 2,000 x 3,000 mm 1 oxy-fuel burner ALFA 1 plasma torch Power source Kjellberg HiFocus 280i Filter system Z-Line 9 ZDC
used
This ESAB SXE-P14500 SUPRAREX Plasma Cutting Machine was made in 2008. It is equipped with an ESAB Vision 52 control unit.
used
This SATO Satronik LS2000 Plasma Cutting Machine was manufactured in the year 2011 in Germany. It is equipped with a CNC 310-3 control unit. The machine includes a satomatic HV S 250 PT CNC arc height sensing and a plasma interlock circuit for a plasma tower.
used
This ESAB Suprarex SXE-HD 3500 Plasma Cuttting Machine was manufactured in the year 2014 in Germany and has 10 production hours.
used
This CRM PTFSTD3015 PW Plasma Cutting Machine was manufactured in the year 2006 in Italy. It is equipped with a FLATRON control unit and has 2 axis. The machine has a plasma power of 12,5 kW.
used
This SATO LS 3500 Plasma Cutting Machine was manufactured in the year 2008. It is equipped with a SATO CNC 3010 control unit. The machine has a Working width of 3100 mm.
used
This STAKO Trium WPC Retrofit plasma cutting machine was made in the year 2019 in the Netherlands.