perforator used for sale

Perforating machine with feeder Rollem, machine number E 195/27, in good condition, immediately available

Electric perforating machine, working width 70 cm

Working width: 1400mm, roll width: 1420mm, speed: 250m/min, heating output: 37kW, compressed air supply: 6bar, controls: MTX 03, operational hours counter: ca. 50h, with documentation.

Size: 450 mm Equipments: Stock weights from 40-500gsm Will take up to SRA3 paper This used machine has 1 creaser multi tool and 1 New perforating tool

BTS-MF40 Cans_PET Special Waste Baler The BTS-MF40 Cans_PET Special Waste Baler with perforator is ideal for compacting difficult and hard materials such as beverage cans and PET bottles. The perforator compaction head pierces empty but also full bottles and cans so air and liquid can escape and in the same process material will be compacted. The Special Waste Baler impresses with its easy operation throughput and large filling volume. - Solid bales with bale weight up to 40 kg - Suitable for empty and full cans and PET bottles - Shorter handling time cause one chamber is always free for loading while the other chamber is compacted - Perforator compaction head for piercing closed cans or PET bottles so air and liquids can escape - Roller guided head for ease of movement - CE-certified - Quality product Made in Europe Pressing force: 8 Ton Motor: 2.2 kW 16 Amp Power suppl ...

consists: punching machine IBICO EP-28: Watt 510/ Volts220/ AMPS 2.3/ no. 10394/ Hz50 punch binding machine IBICO EPK-21: Watt 250/ Volts 230/ AMPS 1.5/ No. 118713/ Hz50 punching machine IBICO HB-28 Perforator

3-way guided flat steel perforator - the RollsRoyce among needle perforators up to 70cm insertion width motor driven - foot pedal pivot pin coupling penetration force approx. 12-18 sheets half perforation through split needle holder perforating comb scoring comb with 2 scoring lines of different width side guidance front stop with ruler deliver tapes allow high speed production Machine has been fully refurbished - can be tested!

Complete Printshop package: HP DesignJet T7100PS (42 ", 1067 mm) 3 roll feed plotter Printing capacity 9,490 m² see usage report HP DesignJet T7200 (42 ", 1067 mm) 3 roll-fed plotter Printing capacity 74,460 m² see usage report HP DesignJet Z6800 (60 ", 1520 mm) overhauled plotter Printing capacity 1,195 m² see usage report HP PageWide E77660 (50/70 ppm) with finisher (Punsh, Staples) Printer Printing capacity 258,424 (total) see consumption page HP LaserJet 4050 TN (3 trays paper feed) Printer DYMO LabelWriter 310 Printer Konica C754 (1 underfeed bin) Printer including toner (x8) € 25.00 each EFI Model: Color Profiler Spectrometer ES-1000 Spectrometer HP Sanner 4520 (42") scanner Avision AV 220 C2 A4 scanner Avision FB 2080E Scanner A3 Rowe 721-1 (folding width 96 cm) including cross folding Folding machine P ...

automatic baler Manufacturer: UNOTECH Type: UPAMAT 100V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Channel format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Rated current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32.000 kg Control: Siemens S7 - IM-151 Capacity: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large digit displ ...

6cm-width needle perforator / creasing machine stand model with front & back table foot pedal perforating comb creasing comb back table stop with ruler - machine has been refurbished - can be tested

automatic baler Manafacture: UNOTECH Type: UPAMAT 100 V 5 Year of construction: 2014 specifications: Cutting force: 1,000 / 315 KN / bar Specific pressing pressure: 12.12 kg/cm² Filling opening 2,000 x 1,020 mm Duct format: 750 x 1,100 mm (H x W) Bale weight: 500 - 800 kg (depending on material and bale length) Binding: 5-fold vertical Drive power: 1 x 75 kW Nominal current consumption: 175 A Connection fuse max. 200 A Pump: Internal gear pump Noise emission: 82 - 85 dB/A Machine weight: 32,000 kg Control: Siemens S7 - IM-151 Output: approx. 340 m²/hour under operating conditions Throughput: at 30 kg/m³ bulk density approx. 10.0 t/h at 50 kg/m³ bulk density approx. 16.0 t/h at 100 kg/m³ bulk density approx. 32.0 t/h Equipped with: Press box planked with HARDOX central lubrication point Large-digit display  ...

Complete Printshop for sale: Booklet Maker SDD BLM 6100 corner punch Beier Multinak-S Perforator Hang Maschinenfabrik Type 136D Grooving and perforating machine E. Bickel HK 3/68 Rotaprint R40 AK Cutting machine Polar Moor 90EL (this has to be taken apart for removal) mini gathering machine Duplo DC-10 Pallet truck 114 cm fork trolleys (10 pieces) 2-tier trolley (3 pieces) 4-tier trolley (1 piece) vibrating table (1 piece) Package Price: on request

Elwa bag machine +Dietrich electronik perforator , max. whidth sealing 1250mm , min. 300mm . Thickness from 2x0,02 -0.2 . Speed 110cycles/minute when was new . Needles collection for the bags.

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

Automatic system for packaging with heat-shrinkable plastic film. the aforementioned system consists of: 1) feeding belt complete with photocell and work surface 2) n.2 manual feeding modules with work surfaces 3) automatic wrapping machine with biconical wrapping machine 4) printed film group with central branding 5) hole fixture(European) 6) longitudinal perforator for facilitated opening 7) longitudinal welder with tilting wire 8) ionizing welder 9) shrinkage tunnel 10) belt with by-pass 11) collection belt 12) rotatable stacker Working hours 293 as per the attached photo.

Viara Futura 1400 mm welding machine, year 2010, complete with folding strap for higher switching, suitable for heavy bags or industrial plugs, bag thickness mm.100-4000, weldable materials ldpe/hdpe/mdpe weldable thickness: 30/400 my.Currently original Viara perforator. Replaced last month: rubber calander complete with caps, two air blowers, overhaul of the welding from the side of Viare, replaced screen for machine control, new tape for assembly, aluminium rollers available for assembly, machine prema EEC standardima, large production capacity, visible in the range, without hydraulic undercut, or with metal construction on sale where rolls can be placed, available from September

We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input ...

-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories