perforating machine used for sale

Creasing & Perforating machine Kroll Model 700 Year 1960´s Working width 700 mm Tools some tools, but not worth mentioning Available direct

Width 68 cm Built in 1963 Grooving and perforating machine electr. Drive Foot switch incl. base frame Price on request. We deliver and install worldwide!

Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Bickel HK 3/50; good condition; Working width 500mm; Stand model; with slot and perforating tool; Foot Switch. ; ready to go. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Producer: W&H (perforating type) Type: Matador S1 Bag width: 50-260 mm. Tube length: 120-540 mm. With 4 colour print

DIRECTLY FROM THE PRINT SHOP Offer consists of: Horizon Smartslitter SMSL - 100 Cutting, creasing, perforating in longitudinal and transverse direction SMSL-100 SMSL-CA SMSL-PR longitudinal perforation unit PRF-36 SMSL-CV SMSL-ST Card Stacker - 3 functions in one operation - Total running time: only 61 hours - Control: TouchScreen - Feeder: Flat stack feeder -Format: - Sheet format max. = 370 x 670 mm (unprocessed) - Sheet format min. = 210 x 210 mm (unprocessed) - Sheet format max. = 370 x 670 mm (machined) - Sheet format min. = 48 x 50 mm (machined) - Paper weights: - Uncoated: 80 - 350 g/m2 (80 - 200 g/m2 with PRF-36) - Coated: 100 - 250 g/m2 (128 - 256 g/m2 with PRF-36) -Equipment: - Pressure offset correction by brand reading by camera - Optimal setup of PDF or JDF data via PC - Recognition of register marks, 1D and 2D barcodes by camera -  ...

Offer consists of: - High-performance finisher DocuCutter DC-745 Duplo DocuCutter DC-745 High-performance finishers for digital color printing: - Investors: Suction/blowing air feeder with alignment line - Operation: via LCD display - PC included - Software included - Business card module - Job memory: 80 memory slots for retry jobs - Error avoidance: Ultrasonic double leaf control Control compartment Test running program Print mark reading - integrated knife 6x 2x Edge cut 4x for card cutting - Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Speed: 50 sheets/minute - Current: 230V / 50Hz / 2.7A, 550W - Dimensions: 3.040x1.020x1.115mm - Weight: 450kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing o ...

Condition: Very good condition

Ref. 449 Groove and perforation machine " Max Mohrstedt, BERLIN C. 19 " Built around 1900 Working width approx. 60 cm Groove and perforating comb weight 210 KG Condition: Tested, Functional / Perforating comb usable length approx. 55 cm

M. No.: 1253 Format (cm): Min. 10×15 / Max. 50×70 Sheet weight 80 to 400 g.s.m. Equipment / Additional information: Grammage: 60 - 600g / m² Voltage: 400 V / 50 Hz

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consists of: - High-performance finisher DocuCutter DC-645 Duplo DocuCutter DC-645 High-Performance Finisher for Digital Color Printing: -Investor: Suction/blowing air feeder with alignment section - Operation: via LCD display - Control: Barcode control - PC included - Business Card Module BCM-54 54mm - Longitudinal perforation PFM-01 - Job memory: 80 memory locations for repeat jobs - Error prevention: Ultrasonic Double-Blade Control Dowry compartment Test Run Program Print Mark Reading - Built-in blades: 6 longitudinal knives + 1 cross-blade -Format: max. 650x370mm min. 210x210mm - Paper weight: 110-350g/sqm - Loading capacity: 100mm - Grooves per sheet: max. 10 -Vel ...

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. paper width: 68 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 46 + Format (cm): 32x46 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

N & P (NUMBERING & PERFORATING) UNIT FOR OFFSET PRINTING MACHINE HB GTO 52 + Format (cm): 32x52 All existing tools will be included with the device for punching and perforating as well as holders of these tools (see pictures)

CREASING– PERFORATING TOOL FOR ADAST-DOMINANT AD725 PAN ( + VERSION) Available: immediately

Enveloper feeder Schneider SF 80; Shed investors; good condition; cleaned and tested; format max.360x360mm, min.100x100mm; Max. Speed. 15000/hr; Height adjustable; optional with delivery belt A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; for option with delivery belt A20.

Lateral Perforating Unit GTO 46 (EXTRA TOOLS) • incl. numbering shaft • 2 extra perforating knives (unused)

Spare part for Heidelberg GTO 52 Lateral Perforating Unit • nr. 69,731,800 K01 • incl. numbering shaft nr. 69.431.370

Bickel MPA 65 Electronically controlled Stamp Perforating machinePerforation of postal stamps, tokens, calendars. Size 900 x 650 mm with lot of tools.SCC control and positioning over monitor. Automatic central greasing. List of tools: base tools - 35,5 mm 48,28 mm 24,14 mm Perforation only with line: 48,28 mm round (big)- Ø35,5 mm 35,5 mm round (small) – Ø24,14 mm 48,28 x 40,53 mm shape of hart 48,28 mm with protection of romb 35,5 mm with protection romb Closed sizes: 48,28 x 24,14 mm 35,50 x 25,56 mm 35,50 x 29,82 mm Age: 1992 Machine tehnicaly controled/ checqued. Cleaned. With machine there is automatic delivery and jogger.

Year of construction unknown Impression unit with numbering and perforating device suitable for GTO 52 4 numbering units, 7 digits, counting forward Perforating device vertically Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Standard

Enveloping feeder Schneider SF 80; shed feeder; good condition; cleaned and tested; Format max.360x360mm, min.100x100mm; .max. Speed. 15000/hr; height adjustable; with delivery conveyor A20. Envelope feeder Schneider SF 80; good condition; cleaned and checked; size max. 360x360mm, min.100x100mm; max.speed 15000/h; adjustable hight; with delivery belt A20.

unknow A9020411 (12-14)-

Operator Panel

unknow GE.570205.0002.00, part of the set-

Main Rack

BARCO HULPFUNCTIE 16 DIG OUTP

BARCO FLOPamp;KBRD INTF MNC95

KRÜSI chalet construction machine / log cabin production system type CM 40 Manufacturer: Krüsi Krüsi Maschinenbau AG CH-9105 Schönengrund AR Year of construction: 1996 S/N 431 Condition: good, technically checked and cleaned / ready for use Machine description / equipped with: 1. Sawing unit: Hand feed Spindle adjustment with analogue dimension display 2. CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display 3. Drilling unit: Hand feed Spindle adjustment with analogue dimension display 4. End milling unit Hydropneumatic feed Spindle adjustment with digital dimension display Specifications Workpiece Cutting height max. 200nn Cutting width max. 250mm Working table height 900mm Sawing unit Saw blade Ø max. / bore ø 400 / 30 mmm Tungsten carbide equipped with chip depth limiter (synchronization)  ...

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table

! A B S O L U T E R S O N D E R R R E I S ! Drill grinding machine manufacturer Avyac from France, Built in 1983, Weight 800kg, Fully automatic with praezisions 6 jaw lining for drills up to 51mm. All dimensions of a drill can be adjusted. Machine under power ready for use. Special price Alzmetall Gühring Garant MK2 MK32 MK4 MK5 Flott Gillardon

Universal riener, double riening machine, brake coating riener e.g. for rivets of couplings or brake belhighs Adjustable distance Ideal for faithful restoration and maintenance of classic cars Rest according to photos Special price

Kettenstemmer GF L x W x H: 120 x 70 x 270 cm Weight 570 kg Baeqvhtqms Year of construction 1983 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12