package used for sale

Manufacturer: Solar Turbines INC, San Diego USA Model: Taurus 60 with Solonox combustion, Packager: Turbomach Version: T 7301 Yoc package: 1998 Turbine engine: new engine installed in 2012, only few hours since installation Condition: fully serviced and ready for start. Capacity: 5200 kW Speed: 14.944 U/min continual Fuel: Natural Gas and Light Diesel (dual fuel) Fuel consumption: 122.469 kJ/kWh Burners: 12 Start system: electro.hydraulic, 90 kW Outlet temperature: 486°C Exhaust gas: 21.244 kg/s

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition Nagema wafer cutter 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Glass fibre stub (non-conductive) with aluminium frame, Sheet made of non-conductive fibre glass fiber composite, Entrance door for high-voltage penitohouse, heavy, stable emitting, with lueftunggitter, lockable, a total of 5 stubs available, unused. The luefting grid could be replaced, for example, by a disc. Installation example according to photo 3. Dimensions: width 1300mm Height 2120mm N7eaerb7 New price 1,500.-EUR / pc. Sales price per piece or gladly as a total package against bid Special price

2 pieces Mosca strapping machines, bundling machine - used - : Price per piece from location: 2,295.- EUR (net)! Manufacturer: Mosca Type: RO-TR-13 Year of construction: 1997 Welded closure: Thermal Bandwidth: 5-9mm Belt voltage: Infinitely adjustable Belt unwinders: Belt coils inside- 200 Weight: 415kg mains voltage 200-440V Airpressure: 6 bar Air consumption: 5.4l/stroke noise emission: 75 dB measured according to DIN 45635 pressing pressure: downward max. 650N at 6 bar / upward max. 100N at 2 bar Afield: The fully automatic strapping machine for almost all packaging areas and package sizes: Width: 100mm - 550mm Length: 150mm - 600mm Height: 5mm - 400mm Machine Description: Fully Automatic Plastic Strapping Machine for Poly-Propylene Packaging Tapes. High connection voltage due to minimum distance from the transport plane to the locking unit. Transport speed of 0.1 -0.8 m/sec  ...

Fine beam plasma cutting system HD 3070 with manual gas console incl. Arcwriter Hose package plant suitable for 3 m x 8 m

Overhauled: 2018 Year of construction: 2001 Band saw blade 5800 x 41 x 1,3 mm Motor power approx. 11 KW with frequency control Cutting speed 20-170 m / min Square maximum work area: 430 x 430 mm Round maximum work area: 430 mm Section length 10-600 mm (~ 9999 mm multiple hub) Nachschubgeschw. Max 400 mm / s Weight approx. 4500 kg Dimensions Lxwxh 2910mm x3600mm x2200mm The machine is both technically and optically after completed retrofit in mint condition. A visit of this saw system is possible at any time. The machine will be overhauled in our House. Among other things, following points are renewed: -Modification on PLC control Siemens S7 -Renewal of the ball screw drive -New electric components -Renewal of the pneumatic pipes -New pneumatic components -Renewal of the hydraulic pipes -Overhaul and renewal of hydraulic components -Overhaul of cabin -Overhaul of  ...

Many thanks for your interest on our second hand machines, please find follow our offer: Manufacturer : SIG Type : SB horizontal flow-pack YOM : 1988 Package size range : min. 60 x 30 x 5 mm (lxbxh) max. 410 x 180 x 75 mm (lxbxh) Trigger length : between 90 and 470 mm depending on the format range Roll width : up to 590 mm Output : up to 250 pcs./minute; infinitely adjustable Electricity : 220-380 V; 3 ph; 50 Hz supply chain length : ca. 5000 mm different: double foil roll holder automatic film splicer PLC Control date printer good Condition 5m long belt infeed We offer this machine in 'as is' condition, without warranty ex Warehouse Hess. Lichtenau, unpacked

Built in 2006 Speed bundles/min 40 Pakete/min Size packaged good width max 340 mm min 150 mm Size packaged good: height max 480 mm min 10 mm Size packaged good: length max 500 mm min 150 mm Size packaged good: diagonal max 600 mm Package weight: max 25 kg Electric supply: 400/50 V/Hz Speed: max ca. 24-55 m/min Weight: 150 kg (approx.) ; working condition

Technical data: -Equal water-cooled AC unit TIG TR 4,. -water-cooled MIG-MAG system DV - IV - XT - E. welding plant STH 400 for welding of: stainless steel, steel, aluminum, etc. -16 x welding program be selected with: -. Setting selection: Stick welding, Tig - welding AC / DC, MIG-MAG welding -Digital Volt + amp display -Welding current continuously adjustable by 10 A / 15 V to 400 A / 34 A - max welding current of 400 A max 60% ED 315 A 100% ED -Power 400 V / 43 A / 16 kVA -Heart monitor -Welding current rise - and welding power descent setting -Back fire setting -Gas before. - current setting -water cooled Tig welding - torch 8 m, lightweight design -E - welding cable + ground cable - water-cooled MIG - MAG torch â separate wire feed case DV - IV - XT for MIG - MAG welding -4 wheels - wire feed -Intermediate package welder - wire feed case 4500 mm -P ...

Vices, in three levels adjustable with hand crank with scaling at the three levels of adjustment 1) GRANLUND (green) Jaw width 80 mm Opening width 80 mm Jaw height 20 mm 2.) RID (Silver) Jaw width 80 mm Opening width 80 mm Jaw height 25 mm 3.) RID Bckenbreite 130 mm Opening width 140 mm Jaw height 30 mm Sale is carried out individually or as a package!

Technical data: -Welding current 505 A 35% ED 433 A 60% ED 385 A 100% ED -Welding current 6 coarse steps + 6 fine levels adjustable - welding current adjustable from 40 A / 16 V to 505 A / 39.3 V - digital amp + voltmeter -separate stroke of wire feed case - 4 roll wire feed Steplessly adjustable - 2 + 4 stroke â regulation -E - welding equipment - hose water cooled approximately 6 YDS -Ground cable -Pressure reducer -Intermediate package machine - wire feed speed approx. 8 m - connection 400 V / 50 Hz 50 A -Space requirement approx. B 520 x H 1400 X 1000 mm -Weight approx. 170 kg

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

High pressure cleaner, Cold water high pressure cleaner Manufacturer: Karcher Type: HD 700 Year of construction 1998 maximum pressure: 140 bar 9.5 L / min Drive: electric With hose package All information without guarantee

: 4100 No.1 gebr. Rods - machining center 5 - axes Fabr. LID MAHO, DMC type 60 S Bu. 2002 with Sinumerik 840 D - Powerline Shopmill ARB.-ber.: 760 x 460 x 560 mm Power: 19/28 kW Accessories: NC Swivel Head (B-axis) 120 / + 30 ° 60-Fach tool magazine with taper cleaning NC rotary axis (A-axis) with collet Chuck clamping top 65 Tailstock, hydraulically tweeter NC bar loader 1100 mm Workpiece pick-up facility with discharge conveyor Production package with -Coolant tank 600 l, INTERLIT SKA 200-760 - IKZ 40 bar through the Centre of the spindle -Conveyors -Rotating viewing window Tool measurement Fabr. BLUM Oil mist extraction Mode 4 Other: HSK-A 63 spindle speed range up to 18,000 min-1 Feeds up to 50 m / min Rapid traverse 50 m / min Space requirement approx. 5 x 4 x 2.8 m (see floor plan) Weight approx. 13 to Shipping dimensions approx. 12 lane meters in maxi ...

Roller tracks for cross promotion of wood Width 110 mm Enable roles Approx. 3 m long rail pieces with requirements for package promotion 6 piece Weight 600 kg In good condition, ready to use Subject to changes, errors, prior sale! Service/Ersatzteile durch MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Maschinenbau Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Overhaul year 2018 Year of manufacture 2010 Saw blades carbide 500 mm Saw motor power 7,5 KW Speed saw motor 2000-38000 min-1 Cutting speed blade 3100-6000 mm / min Saw blade feed adjustable 0-40 mm / s Working range 90 ° Max: 460 x 50 mm Supply length Pneumatic: Single stroke: Max 300 mm Servo controlled: Single stroke: Max 300 mm Multiple Hub: maximum 9999 mm Nachschubgeschw. Servo-controlled replenishment unit 300 mm / s Compressed air connection of be 6 bar Gewicht(Saege)CA.: 1000 kg Dimensions LxBxH(Saege)ca.: 2100mm x2000mm x1600mm Hydraulikagregat) approx.: 900 mm x600mm x800mm Technical description Pressta Eisele Profilma 540 retrofit Pressta Eisele Profilma 540 retrofit Fully automatic high-speed sawing machine for non-ferrous metals and plastics The machine is both technically and optically after completed retrofit in mint condition. The machine  ...

For sale 6 electrics CROWN in the package! (Hours of operation between 500-1200!) Special price!

1 courtyard entrance / gate, new, drive with dead-man switch Gates suitable for up to 10 meters ICARO NF PROX - 230 V AC 750 Watt - 9 m / min continuous operation dead man control, optional radio control only with pressure bar package,(Gesamtlänge: CA. 9.500 mm), single / self-supporting, clear opening width: 7.000 mm x height: 1,950 mm, material: frame Rectangle tube and lattice mats filling in static adequate dimensioning, 1 post with base plate and 4 holes, height: 1,950 mm, incl. mounting material and Foundation plan, gate is on closing direction / driveway bolted to the Foundation, right or left (seen from outside), surface: hot-dip galvanized, item location: ex works, self assembly. Price: On request! Freight cost: On request! Other dimensions, coatings and mounting types on request. Delivery time: Approx. 6-10 weeks (depending on the season)!

Starter package: 10 sqm Hünnebeck Tekko basement and Foundation shuttering, needed. The offer consists of: 12 x Tekko table 90 x 90 24 x Tekkozwinge 12 x tie rod DW15 100 cm 24 x nut We are happy to answer questions phone 06190-93449-0 Please note also our other offers! We can offer you several thousand square metres of used moulds, tools and containers - ask us!

583 pcs. new NH fuses Manufacturer: Euro Fuse, NSP, Siemens, Mertens, Siba, Sprecher und Schuh Types: List of all fuses - see photo Sizes 000, 00, 0, 1, 2, 3, 4, 6A, 10A, 16A, 20A, 25A, 35A, 50A, 63A, 80A, 100A, 160A, 200A, 224A, 250A, 315A, 400A, 500A, 630A, 1250A, 1600A New! The fuses were bought from a spare parts store of a company in the course of a bankruptcy and are completely new. Sales price in the complete package around € 1996 excl. VAT.

New water jet cutting machine Make: aps Type: 3D 5-axis 301508 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -Latest CAD-CAM software -Latest high pressure pump 22 kW -Latest Abrasivausrüstung with cutting head, Abrasivdosierer and storage containers Work area: L: 3000 mm x B: 1500 mm x H: 800 mm Dimensions: L: approx. 5000 mm, B: approx. 3500 mm, H: approx. 3200 mm Z-axis: optional with collision protection Cutting speed: up to 10 m / min. Positioning accuracy: ± 0.1 mm (500 mm travel) Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pres ...

New water jet cutting machine Manufacturer: aps Type: Jetcut integral 2030 Little hours Conversion to pure water operation possible Year: new -Latest generation of control -Latest servo drives -New high pressure pump 22 kW -New Abrasivausrüstung cutting head, Abrasivdosierer and reservoir workspace: 2000 mm x 3000 mm Dimensions: L: approx. 4600 mm, B: approx. 2900 mm, H: approx. 1500 mm Z-axis: 180 mm, full servo axis, optionally with collision protection Cutting speed: up to 15 m / min. Positioning accuracy: ± 0.1 mm Repeatability: ± 0.05 mm Die heads: 1 x Abrasivschneiden or 1 x pure water cutting Electrical connection: 3 x 400 V, 50/60 Hz.; 35 A slow Compressed air connection: approx. 20 NL/min at 6 bar Water connection: depending on the used high pressure pump High pressure pump: 22 kW Pressure: depending on the used high pressure pu ...

Duration / ALB ear power 30/35 mm thread cutting capacity Max M24 (Steigungsabhängig) hand-reversing switch for forward link. Undervoltage, thermal overload protection, spindle MK 3 drilling depth 180 mm throat depth 260 mm column diameter of 110 mm-usable table surface [BxL] 420 x 340 mm speed display scale drilling depth indicator scale drill depth stop with fine adjustment Table height with rack and pinion motor three-phase of 400 V pole changing bar 1,5/2 kW spindle speed continuously 125-2000 1 / min including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years delivery: immediately, free delivery loaded: free House including packaging not the right machine? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutter M20 (depending on elevation) variable speed of 125-4000 U/mon in two stages, stage change of belt apportionment. Drilling capacity 25/30 mm Spindle MK 3 Drilling depth 125 mm Projection 280 mm Usable surface (pivoting) 420 x 340 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 520 x 820 x 1900 mm Motor three-phase 400 V pole changing bar 0.9 / 1.45 kW Weight 300 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and chip fracture module 690 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Fully automated page welding machine Manufacturer: Diez Type: DCE 5015 Year of construction: 2018 Operating side: in the running direction left Band-width: approx. 450 mm Clearance height: approx. 150 mm Barrel length: Endless Working height / belt height a-spout: approx. 870 mm + 100 Capacity: up to 30 cycles / min (depending on the package size and feed speed) Supply voltage: 400V AC, 50 Hz, 3 pH + N + PE Power consumption: 2 KW Nominal current: 8 A With cable and 16A CEE plug Compressed air supply: 6 bar External dimensions: Length: 1750 mm Width: 1000 mm Height: 1520 mm Description: This packaging machine automatically packaged products of all kinds in foil. Maximum flexibility through the page welding can endlessly packaging products. This allows the user to also overlong products packaging They are limited only in width and in height. But also very small p ...

Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed by hand Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE PARTNER .

Thread cutting device Freischneiden Setup Drilling depth shut off programmable Drilling depth and speed display - digital Thread cutting device M30 (depending on elevation) R1 spindle speed with continuous transmission speed series 100-2000 1 / min R2 spindle speed with continuous transmission speed range 70-1400 1/min Drilling capacity 35/40 mm Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm Usable surface (pivoting) 590 x 450 mm Feed 0-300 mm / min stepless Table height with rack and pinion Machine dimensions (W x D x H) 610 x 850 x 1920 mm Motor three-phase 400 V pole changing bar 1,5/3,0 kW Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Option: spindle stop and modulus of rupture of chip 660 EUR DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK  ...

synthetic Yarn Take-up Winders Barmag POY / FDY filament yarn high speed take-up winder, SW4 type with 2 bobbins Chuck length: 600 mm Chuck type: 2 bobbins Chuck dia: 75 mm Stroke length: 250 mm max package dia: 305 mm MAX MECHANICAL SPEED 6000 M / MIN, WITH DOUBLE-DECK ARRANGEMENT AND PITCH 410 MM

Duration / ALB ear power 35/40 mm Thread cutting capacity Max M30 (Steigungsabhängig) Hand-reversing switch for forward link. Undervoltage, thermal overload protection, Spindle MK 4 Drilling depth 160 mm Throat depth 300 mm 2johiqzz Column diameter 110 mm Usable surface [BxL] 420 x 340 mm Speed display scale Drilling depth indicator scale Drilling depth stop with fine adjustment Table height with rack and pinion Motor three-phase 400 V pole changing bar 1.5/3 kW Spindle speeds with continuously variable transmission 100-2000 1 / min Machine size (WxDxH) 610 x 850 x 1920 mm Weight 420 kg Including drilling package consisting: taper mandrel, Chuck, Vice and T - Groove set. Warranty: 3 years Shipping time: immediately, free loaded DELIVERY: free House including packaging NOT THE RIGHT MACHINE? WE DO ALSO OTHER AFLOAT PRODUCTS - ASK FOR A QUOTE! FLOTT BASE  ...

4 axis vertical machining center for input shafts machining 2 pallets STAMA MC 325S 2 pallet with rotopallet Peiseler X=500 Y=300 Z=350 mm Rapids X,Y,Z = 40/40/45m 36 tools ISO 40 36-9000 rpm Table 950 x 800 mm CNC SIEMENS 840 N.2 double 4th axis Coolant through spindle Lavorazione input shafts (ex TRW) INTERESTING PRICE (package of 2 machines)

Powershift gearbox ex Hakotrac 1800 DA due to fire damage, axle and PTO gearbox not complete, untested, housing damaged, according to Fig. Missing parts such as diff.lock and PTO shaft from gearbox ex 2250 DA and other used parts such as lamella coupling, differential, axle shafts, power lifter, Yanmar diesel engine, radiator etc. available - see sample photos. Info and offers on request. We do not send package offers, no lists and do not respond to anonymous messages - please provide full name and place of residence as well as telephone number for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, env ...

Used parts ex ISEKI TG 5390 AHL. 28 kw/40 hp turbo diesel, hydrostat drive 3-stage, 4-wheel drive, front power lifter, cabin, lawn tyres. Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

• Stroke: 235 mm • Piston diameter: 40 mm • PPV: pneumatic damping, adjustable on both sides • Installation position: any • Twist protection by square piston rod • How it works: double-acting • Operating pressure: 0.2 - 12 bar • Ambient temperature: -40°C to 80°C • Type of fastening: with internal thread and accessories • pneumatic connection: G 1/4 • maximum torque of the twist protection: 1.1 Nm • Impact energy in the end positions: 0.2 J • Operating medium: COMPRESSED air according to ISO 8573-1:2010 [7:4:4] • Oiled operation possible (required in further operation) • Attachment to the piston rod: M 12 • Note: Goods are unpackaged but as good as new! • 6 pieces are offered, these can be purchased individually as well as in a package! The price refers to the unit price! (Changes and errors to technical data and prices reserve ...

Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...

Spreading attachment Küpper-Weisser STA80 W12H. Attachment device for Unimog, trucks, equipment carriers, etc. with municipal hydraulics. Content 1.2 cbm . Equipment: tarpaulin folding roof, control panel and documentation. Further spreading technology as well as snow clearers in various designs and sizes stock edstocked! Info and offers on request. We do not send package deals, lists and do not respond to anonymous messages - please give full name and place of residence as well as tel. no. for inquiries. Please be happy to receive advice by phone in advance. For viewing appointment sat is required! ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for plant & sports field maintenance, gardening & landscaping, cemetery technology & winter service, sweeping & disposal, environmental care, motors and more...

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Painted ceiling supports 3.60m Steel construction supports with a red dip bath paint. Decoupling system - this enables a quick disarming of the support with little effort Foot reinforcement - by mounting a stronger pipe near the footplate Due to holes every 100 mm in the inner tube, the extension length varies between 50 and 500 cm Compatible with most of the accessories of other formwork Technical data: Inner and outer tube made of steel S235JR according to UNI EN 10219-1 / 2 concealed threads, step 8 mm, for adjusting the length Threaded pins directly on the outer tube, or welded, manufactured by rolling, i.e. without rejecting the material Lower plate available in flat or curved version Upper plate available in three versions (flat plate, with fixed cross or "U"-shaped) Highly resistant safety hook for fastening between inner and outer tube Hand-squeezing for safe con ...

Manufacturer: Grundfos Number: 3 Model: NBE 50-160/167 A-F-A-BAQE Built: 2008 Rated flow current: 87.4 m3/h Nominal head: 32.6 m Speed: 2900 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Complete Printshop from one place in germany: Manufacturer: Heidelberg Model: GTO Year of construction: 87 Size: 32 x 46 cm Totalizator status: approx. 29,450,894 Availability: in July 2021 Manual double sheet control AntiqueStatic Simco Powder device WEKO Chromed plate cylinder 2 display trolleys Sticks of paper Rubber blankets 2 clamping bars Page marks + upright + left for small formats Support plate Bacher Controll- 1 Bacher register punch with assembly and fitting strips Plus version complete numbering and imprinting device incl. 3 numbering machines + accessories Perforation device: 2 perforation and creasing insert blocks Bracket with three leaf springs Dampening system Varn Kompac III GT 46 Year: December 9, 1994 POLAR CUTTING MACHINE High-performance high-speed cutter Manufacturer: PolarMohr Model: 76 EM Year: 1993 Availabile: end of July 20 ...

Manufacturer: Grundfos Number: 3 Model: NBE 65-160/173 A-F-A-BAQE Built: 2008 Rated flow current: 126.9 m3/h Nominal head: 33.4 m Speed: 2910 rpm Pressure: 16 bar Temperature range: 0-120 °C Power: 15 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good

Pad printing package: Machine 1: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 2000 Flame treatment plans: Arcotec FTS 101 P Year: 2000 incl. Cable, burner, connections, devices and wall bracket Machine 2: Manufacturer: Massek Model: Pad Printer PP150 14 recordings Carréband Year: 1997 Flame treatment plans: Arcotec FTS 051 D Year: 2001 including cables, torches and connections, devices and wall bracket Equipment: Closed system 4-fold: cliché size 200mm x 100mm Pot diameter 90mm 4 ceramic pots 8 squeegee cups 50mm high 5 squeegee cups 20mm high 3 magnetic holding plates Drying belt: In length, including ceramic heating Flame treatment system (new, unused): HILL WF 10-0 Year: 2004 incl. cable, adapter, connections, burner Ink basin open 4-fold, cliché size 150mm x 450mm, ink squeegee 4 x 90mm Ink basin open, cl ...

We Design, Print and Deliver : CRF Packaging offers packaging material for the dairy and food industry, laminated aluminium foil, Lacquered Lids for Cup Sealing, Laminated Foil For Processed Cheese and Cardboard. Having the experience in sourcing/refubishing used machines for over 25 years, we now offer the packing material at a competative price, keeping the quality of European standards. We offer the complete package from used/refurbished machines, packing material, intsallation and service. CRF PACKAGING DOT COM

Forms 9 pcs. for the production of Styrofoam Pins A package of professional injection moulds for the production of pins for polystyrene ( 9 pcs. molds from 12-36 sockets ) Name 1 St. 10 / h – 120 mm 12 Cold Channel 2 Wedks 10 / h – 160 mm 12 Cold Channel 3 St. 10 / h – 180 mm 12 Cold Channel 4 Squid 10 / h – 200 and 220 mm 12 Hot channel 5 Squid 10 / h – 240 and 260 mm 12 Hot channel 6 Wed.5 nails /70, 90,120, 140 mm 36 Cold Channel 7 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 8 Wed.5 nails /160,180, 200, 220 mm 36 Cold Channel 9 Nail caps 36 Cold Channel

– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...

Printshop for sale as packackage: Manufacturer: Didde Model: Glaser 24" (860) year: 1981 model 205727 Condition: five-color press that rolls nicely today and runs both roll-roll, roll-fold and roll-sheet. Not jumbo rolls. 450 mm wide. Location: sweden Price: on request Manufacturer: Didde Model: Glaser 16 2/3" (860) year: 1980 model 205727 Condition: four-color press that rolls nicely today and is very well maintained and has completely new extra rollers. This runs roll-roll and roll-sheets. Not jumbo rolls. 450 mm wide. Location: sweden Price: on request Manufacturer: Hamilton blue roller collator Condition: works perfectly Location: sweden Price: on request Collator Manufacturer: Schober Hochdorf Model: SR 1 CR for chain forms year: 1982 Location: sweden Price: on request Runway Manufacturer: Hunkeler Model: SBA 19 with over 100,000 runway ...

1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

PA 21/3 High-performance brochure inserts for pre-folded brochures/package inserts Technical features: -Drive on the right -Solid construction -Low-noise drive - without gears -Modular system - Highest performance through the use of double curve, crank drive and electronically controlled stepper -Compulsory handover Sizes: -Inlet width max. 210 mm min. 60 mm -Inlet length max. 105 mm min. 15 mm Paper weight: -Recommended paper thickness 45 - 100 g/sqm Achievement: -Depending on paper quality and fold up to 400 rpm. Drive: -via chain Mass and weight at PA21/3: 1600 x 640 x 500 mm (length x width x height) Weight: 84 kg Compressed air connection for solenoid valve vacuum control 6 bar, vacuum connection: 0.6 bar, compressed air connection (Festo valve) for pneumat. Swivel actuator 6 bar The PA 21/3 are similar in principle to the PA 21/2, but hav ...

Key data: 125 Cybelec, 2550 DNC 90 3D

Capacity: 125 t Folding length: 2550 mm CNC Brand: Cybelec CNC Model: DNC 90 3D Large tooling package Original paint 1e owner 2 hand opperator DNC 90 COLOR 3D Control Max. bending length:        2.550mm Distance between column:    2.050mm Max. pressing force:        125T Dis. Beam – Table:          480mm Beam stroke:                215mm Approch speed:              130mm/min. Working speed:              7mm/min. Return speed:               160mm/min. Adjustment X-Axis back gauge:1.000mm Number of controlled axis:  Y1 / Y2 / X  Control:                    Yes  Crowning:     ...