pa used for sale

diameter of piston: 0 0 stroke length max.: 0 0 2 boards with hydraulic and pneumatic spareparts from Rexroth, Parker, Vickers, Festo, Wabco and Orsta! Without board, only sparepars! partially unused! Detailed pictures can be supplied. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pausch recording workstation Compact CS 2000 with the following device components: Generator Editor Hfe 501 Tube RAD 21 0.6/1.2 Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally railed and with Stretch film wrapped and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full Functionality without guarantee. • The installation and configuration of the system or plant components must be completed by a specialist authorised by the manufacturer or technicians!

Maximum pressure: 130 tons Pressing force: 107.5 tons/m² Channel cross-section: 1100 x 1100 mm Bale weight: approx. 700-1000 kg Power supply: 400 V/ 2 x 55 kW Year of construction: 1992 Number of bindings: 5 - fold vertical Dimensions of the tailgate: 1020 x 2000 mm Weight: approx. 40 tons Bale binding: automatic Press capacity at idle: max 720 m³ / hour Press capacity under operating conditions: max 450 m³ / hour Theoretical throughput to density 35 kg/m3: approx. 15.5 tons/hour Theoretical throughput to density 60 kg/m3: approx. 26 tons/hour Theoretical throughput to density 100 kg/m3: approx. 40 tons/hour We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Availability: from now on

used chain conveyor belt Manufacturer: PAAL Type: KEL 1000 Year of construction: 1997 specifications: Conveying width: approx. 1,000 mm Center distance:approx. 7,500 mm Band course: ascending over the entire length, Conveyor belt drive power: 3.0 kW Side bolster height: 500 mm Operating voltage: 3 x 400 VAC / 50 Hz / N / PE

used chain conveyor belt Manufacturer: PAAL Type: KES 1750 Year of construction: 1993 specifications: Conveying width: 1,750 mm Feed length: 18,370 mm Riser length: 13,440 mm Drive power: 9.2 kW 2-speed speed Side bolster heights: 527 / 1027 mm

used residual roller saw Manufacturer: PAAL Type: RS 40 / 250 specifications: roll diameter: 400 mm roll length: 2,500 mm Saw blade diameter: 600 mm Drive power: 22 kW transport chain speed: 2.45 to 11.75 m/min. Throughput depending on roll length and saw cutting depth: 87.5 to 175 m/h housing width approx.: 1000 mm machine length approx.: 9000 mm Machine weight: approx. 2,400 kg

Pago Labeling Machine

- Filter area :6 m2 - Machine in good condition

Spindle diameter: 200 mm Longitudinal X: 12800 mm Vertical Y: 4000 mm Cross Z: 1100 mm Positions ATC: 0   Table length: 0 mm Table width: 0 mm Number of tables: 0   CNC Brand: Fanuc CNC Model: 31 i MAKE   PAMA TITAN License TYPE    AFP 200 YEAR   2006 Retrofitted SPECIFICATIONS Controll    FANUC 31i Floor or table type borer   Floor borer X - Travel   12.800 mm Y - Travel    4.000 mm Z - Travel     1100 mm W - Travel     900 mm Spindle Diameter Ø   200 mm Spindle Taper    ISO 50 Ram size   600 x 530 mm kW power on spindle    100 kW Spindle speeds / ranges   1500 Rpm Number off controlled axis   4 DIMENSIONS Length   18000 mm Width     10000 mm Height     ...

Center height: 205 mm Center distance: 1500 mm Spindle bore: 77 mm CNC Brand: Fagor CNC Model: 8055 T MACH-id   4176 MAKE        DORMAC Padovani TYPE          Labor E 255 YOP            2000 SPECIFICATIONS Max. turning Ø      510 mm X-Axis        255 mm Z-Axis         1500 mm Spindle bore      77 mm DIMENSIONS Length        4000 mm Width         2000 mm Height        2000 mm Weight        3000 kg

SPECIFICATIONS: Table dimensions/height mm: 1140 x 670 x 900 Sliding carriage length mm: 3800 Cutting height with saw blade diameter Ø 400 mm a 90°-45°: mm 135-95 Saw blade inclination: 90° + 45° Post-forming Vorritzer Ø max saw blade chair: mm 125 Ø Suction connection: Ø 120 mm Ø max saw blade mm: 400 Engine power KW: 8

I sell the four-sided planer FUTURA PRG24/7, Year of construction 2005. Element size max. 260x150mm ! 7 Spindle Configuration: Bottom 7,5kW (10HP) / 6000 rpm Right 7,5kW (10HP) / 6000 rpm Left 7,5kW (10HP) / 6000 rpm Top 7.5kW (10HP) / 6000 rpm Top 6.75kW (9HP) / 6000 rpm Right 6,75kW (9HP) / 6000 rpm Universal 7,5kW (10HP) / 6000 rpm Combined power 62KW / 102 A Weight 4500kg. Element size max. 260x150mm ! 2 FABA planing heads with spiral knife fi.140x260x40mm included in the price. Electronic programming for working width, working height and the height of pressure zone Feed speed adjustable with inverter. 2-zone pneumatic material pressure system for feed Available the same.

Roll splitting machine Manufacturer: PAAL Type: RS 100 / 200 Year of construction 1992 with screwed-in track roller guide and in closed frame construction specifications: Roll length maximum: 2000 mm Roll diameter maximum: 1000 mm Drive power: 7.5 kW Cutting force: 20 t Cutting speed: 4.8

From the roll to the bag! Manufacture bags according to desired format and fill and seal with the product. Description - Optimal price-performance ratio - Easy operation and cleaning - Low maintenance - Stainless steel version (1.4301) with safety Plexiglas - Control is carried out by a PLC, color touch display with intuitive operating software - Fast, tool-free bag format change - One format included Specifications - Intermittent heat sealing for hot sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 180-520mm - Bag dimensions (LxW): 60-350mm x 70-250mm - Cycle rate: 15-50 bags /min. (depending on VE) - Electrical power: 3.5 KW / 220V / 50(60) Hz - Compressed air consumption: 700 l/min at 6 bar - Dimensions (LxWxH): 1540mm x 1160mm x 1600mm - Weight: 450kg

From linear to combination scales Application: Dosing free-flowing general cargo in accurate quantities. Characteristics of the scale • High accuracy • All parts in contact with the product are made of smooth 304 stainless steel • Simple operation, easy to clean and can be dismantled without tools • Control Panel: 7" Touch Screen • Low maintenance • Synchronization with all packaging machines possible Specifications • Number of weighing heads: 10 • Weighing container: 2,5l • Weighing range: 10 - 1000g • Accuracy: ± 1.0g - 1.5g • Speed: up to 60 sachets/min (depending on product) • Control panel: 7" touch screen display • Opening of the container flaps by means of stepper motors • Power: 230V / 1.3KW / 50(60)Hz / 10A • Dimensions (LxWxH): 1700mm x 1100mm x 1265mm • Machine weight: 380kg

The automatic Blistering machine Partena CAM mod. M90 is a machine specially designed to face the problems of packaging of pharmaceutical products such as: vials, bottles, phialoids, capsules and tablets. The machine is pneumatically operated, the working cycle is obtained by the following workstations: preheating station, forming station, product loading plan, cutting station, covering station. All the stations are remarkably easy to access and all the movements are fully visible, so that the line is very straightforward to clean. This machine is equipped with various safety devices to protect the operator. The Blistering machine is equipped with a stainless steel elevator mainly used for elevating and loading products onto the receiving tray. The products are collected from the tray elevated, pre-sorted and fed to the top towards further feeding unit until they reach their des ...

An original control cabinet that was dismantled by PAAL Konti 125D, built in 1999. It is based on SIEMENS S5 controller. A complete control cabinet, functional

An original control cabinet that was dismantled by PAAL Konti 275 C, built in 1994. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325,425, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet dismantled by PAAL Konti 200B, built in 1987. It is based on analog relays. It is also suitable for the other models such as: Konti 125, 200, 275 , depending on model and drive power. A complete control cabinet, functional

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by PAAL Konti 425 B, built in 1991. It is based on SIEMENS S5 controller. It is also suitable for other models such as: Konti 200, 275, 325, 425, 500, 600, 700, depending on model and drive power. A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

An original control cabinet that was dismantled by the PAAL Konti 600 E/K, built in 2005. It is based on SIEMENS S7 controller. It is also suitable for other models such as: Konti 700 A complete control cabinet, functional We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Pamasol P2065 Leak Detector with 5 Test Heads Leak detector In order to ensure that pressure-proof and non-hazardous printed packs are available on the market, alternative test methods can also be used for safety testing – before and after filling. One of these methods is the leak detector after filling. The aerosol containers (monobloc only) are tested for leaks in the valve area and at the container neck. Different power ranges are available. Application industrial, packaging, plastic containers Range Individual stations Output on feed units: up to 50 containers per minute Capacity on rotary stations: up to 250 containers per minute Leak Detector 2065 Leak detector for testing the aerosol container (monobloc) for leaks. - Feed with 12-piece rotating star; electric drive - 5 test stations with sensor heads for a can shoulder shape - Automatic ejection of faulty ...

Dossys Tetra Pak Dosys System for Fruit Dosing before filling in Yoghurt Cups

SPECIFICATIONS: Membrane press for gluing doors, curves and other wooden elements Dimensions mm: 2400 x 1120 Heating by electrical resistance Complete with decompressor, timer and tarpaulins

Manufacturer: Pago - Condition: used- Type: System 270i - Description: Used used labeling system of the company Pago System 270i Year of construction of the system is 2007, with installed label head Pagomat 6/2 A. The system was stored in a functional manner and stored dry. Technical data see type plates, all information without guarantee and subject to technical changes as well as typesetting errors. Sale under exclusion of guarantee and warranty to entrepreneurs within the meaning of §14 BGB or warranty to dealers or traders. The removal must be organized by the buyer. - Dimensions W/H/D: - Weight: approx. Kg

TECHNICAL DATA SHEET CNC – Travelling column milling machine Make PARPAS Type SHARK One Control HEIDENHAIN iTNC 530 HSCI Year of construction 2016 Travel Longitudinal movement (X-axis) 3,500 mm Transverse movement (Y-axis) 1,083 mm Vertical movement (Z-axis) 1,074 mm Clamping table Clamping surface 4,000 x 1,000 mm Threaded holes with fitting seat Feeds X-, Y- and Z-axis, infinitely variable 2 - 30,000 mm/min. Rapid traverses in X / Y / Z 30 m/min feed force of the axes 10,000 N 2-axis milling head 2-axis milling head TUB-E92 with drive viaTorque motors for 5-axis simultaneous machining Power at 100 % ED 29 kW Speed range, infinitely variable 0-18,000 min-1 torque 92 Nm Rotational speed axis A/C 60 min-1 Tool holder HSK 63A – DIN 69893 Clamping force A-, C-axis 2,300/4,000 Nm Automatic tool changer ATC Tool stations 30 places  ...

Power supply -Type: RPS -Weight: 13 kg

Filtre presse manuel tout inox Type 06 400 P60, dim. plateau 400x400, année 2003, pression 6 bars, T. 0-125°.

Constanter, oscilloscope -220 V 40-60 Hz -Dimensions: 245/270/H185 mm -Weight: 8 kg

Micrometer, micrometer screw -Measuring range: 25 - 50 mm -Test piece: missing -Accessories: see photo -other sizes: available -Dimensions box: 230/105/H35 mm -Total weight: 0.7 kg

12′ x 3/8″ Pacific Hydraulic Shear Make: Pacific Serial # 1090 Model: 375R12 Maximum Width: 12′ Material Thickness: 14g – 3/8″ Knife Length: 144” Distance Between Housing: 12.5’ Electric Back Gage

72″ x .187″ x 50000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

- Special: with carton box passage - Very few operating hours - Condition technically and optically practically as good as new Dimensions: - Length: 3300 mm - Width: 900 mm - Height: 1800 mm

- with swivel milling spindle - Three-phase motor 6.5/8.0 kW f. 6 speeds 1500/2250/3000/4500/6000/9000 rpm. - Electronic digital displays incl. 2 separate rotary switches for electr. Height and swivel adjustment of the milling spindle (rapid and creep speed in all directions) -Push button for electric upward movement - Milling fence with fine adjustment and Steel Stop Jaws Specifications: Table size 1350 x 800 mm Table height 870 mm Swivel range -5 degrees to +45 degrees Height adjustment approx. 150 mm Mandrel 30 mm, MK 5 Suction nozzle 120 mm diam., 2 pieces Dimensions (LxWxH) 1400 x 1300 x 1150 mm Weight 950 kg. incl. Holz-Her 4-roller feeder (8 speeds), Aigner table extension and stop for insertion milling.

Palmary FCL 12-5 Surface Grinding Machine Automatic loading Without tail stock Accuracy : 0.0001 Robot driver Standard grinding range : 1-40 mm diameter Grinding wheel speed. 1900 rpm Machine is in excellent condition

Pallmann crusher Is in working order. Characteristics are not known.

Used GSP 55 EVO BB flowpack. Manufacturer: General System Pack Year of manufacturing 2019. Production speed: Up to 150 ppm The GSP 55 EVO BB horizontal packaging machine is the result of evolution and many years of experience in the field of horizontal product packaging. It is an electronic, multifunctional and solid machine. Extremely flexible when it comes to changing formats, adapted to packing products in both unit and multipack packaging. The machine is distinguished by its simple design as well as ease of maintenance and safety. Packaging Pillow, PillowBag, Tray, Pillow with Euro hanger Products: cookies, bread, cake, crisps, chips, chocolate, vegetables, tomatoes, fruit, wafers, trays, electrical contacts, plugs, extension cord, furniture accessories, crayons, eyeliner, pens, advertising materials, candles, cloths, sponges, tablecloth, pendants fragrances, dog colla ...

This delta 703 bundle delivery from 2016 has a working width of 700 mm with 3-fold banding. Equipment: Automatic format recognition and waste sheet recognition Press station with pre-pressing and main pressing, with main press roller Package Pressing Vibrating station Auto. Format Setting Quick Adjustment, Counter, Bar Bundling Package height: min. 20 mm Package height: max. 150 mm Capacity: 600 packets/h per panel Speed: up to 60,000 pcs./h Speed: 15-205 m/min Beidddwlcgh Inlet height: 410mm - 1000mm Electrical connection: 6KW Compressed air: 6 bar dry air, consumption 450 ltr./min. to be provided on site Format min. (without small format device) inlet width 110mm x infeed length 95mm Format min. (with optional small format device not included) Inlet width 90 mm x infeed length 65 mm max. 1 panel 760 mm x 305 mm max. 2 panels 335 mm x 305 mm max. 3 panels 235 mm x  ...

Vario 555eMA gummed tape encoder -28 different lengths from 15 - 290cm - Band width: 40 - 80mm -Roll diameter: up to 250mm -Speed: 115cm/sec -Weight: 15kg -Dimensions: 51 x 31 x30cm -14 lengths from 15 - 145cm at the touch of a button -Fine adjustment in steps of +/- 15cm -2 large repeat buttons -Switchable automatic dispensing -Automatic function for up to 3 lengths - Endless button for any length -3-brush system for optimal humidification -Adjustable top heating -Fully electric control Legal Provider Identifier: VOSS GmbH & Co. KG Ohrstedt-Bhf. North 5 25885 Wester-Ohrstedt Germany Phone: 0484780680 Fax: 04847673 E-mail: shopweidezaun.info VAT number: DE310055793 WEEE Reg. No.: DE 35840253 registered in the commercial register of the district court of Flensburg Company registration number: HRA 9110 FL represented by the general partner VOSS manag ...

Machine Name: Chamber Filter Press Manufacturer: Passavant Type: AX 1200 Year of construction: 1990 Design: Bridge spar press Filter pressure: 15 bar Press capacity: Approx. 1800 litres (expandable to 2500 litres) Expiration: Closed Filter area: Approx. 127 m2 (expandable to 175 m2) Plate size: 1200 x 1200 mm Number of plates: 51 (expandable to 70) Panel material: Polypropylene Plate Transport: Automatic Cake thickness: 30 mm Closing pressure: 360 bar Dimensions: L 8000 x W 1900 / 2500 x H 2300 + 600 mm Tech. Documentation: Yes Note: Available mid-February 2024 Accessories: A hydraulic system, a light barrier, a high-pressure pump Condition: Used Price: On request

Heavy motorized circle Scissors make PARX type KSM 6 SMachine -No: 3962 Series -No: 36/79 Year 1979Shear performance up to 40 kg strength: 15 mmShear capacity up to 105 kg strength: 9.0 mmminute Diameter of the tube: 450 mmMax. Diameter of the tube: 1600 mmDischarge between the stand and knife: 625 mmCutting speed: 10 m / min.Drive power: 11 kWWeight approx: 8,2 tused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Parker fuel filter. Model: 30840-B

Parker fuel filter HOCP 44840-B