omp used for sale

Control Fanuc 31i-B5 Speed [rpm] 24000 Travel X/Y/Z [mm] 500/400/400 Tools & Tools. BT30 Spindle: Speed 24,000 rpm Power (max.) 26 kW Torque (max.) 35 Nm Tool holder BT 30 NC Swivel Rotary Table: Technology Swivel rotary table with torque drive and counter bearing Type Häberle DTTiB Workpiece clamping zero-point clamping system, Fabr. Long General: Tool magazine 21 + 240 stations Clamping surface rigid table 650 x 400 mm Table load (max.) 400 kg Rapid traverse in X/Y/Z 54 m/min Automation: Technology Robot cell with carousel memory for tools and Workpieces Robot 6-axis robot Fanuc M20i Carousel storage 240 stations for tool holders, 135 stations for Workpieces Equipment/Accessories: Coolant management IKZ system with paper belt filter and high pressure, 60 bar Chip Management Chip Conveyor Workpiece Measurement Probe, Renishaw OMP 40-2 Tool Measuremen ...

Table length: 1500 mm Table width: 650 mm Longitudinal X: 1400 mm Cross Y: 800 mm Vertical Z: 700 mm Positions ATC: 32   Positions APC: 1   CNC Brand: Heidenhain CNC Model: HeidenHain iTNC530 3-axis CNC machine (VMC)AWEA - BM 1400 MACH-ID 8554 Make: AWEA Type: BM 1400 Control: HeidenHain iTNC530 Year: 2008 2300 Spindle hours HR 410 Handwheel OMP-60 Renishaw taster NC-4 Laser measuring EONAG 3000 Oil filter mist X - Travel:               1400mm Y - Travel:               800mm Z - Travel:               700mm Table Length:             1500mm Table Width:              650mm Table load:               1200 Feed rate X-Axis:      ...

Stock number: 3886 PROCESSING Manufacturer: HERMLE, Type: C800 V Machine NO.: 15521, Year of manufacture: 2002 Specifications: Table size 1000 x 560 mm Large table load 1500 kg Longitudinal movement (X) 800 mm Transverse movement (Y) 600 mm Vertical movement (Z) 500 mm Spindle cone SK 40 Infinitely variable spindle speeds 10000 rpm Spindle motor 25/16.8 Kw Total power 43 KVA Tool changer 30 places Feed rate 1-2000/30,000 mm/min Rapid traverse 35 m/min Control Heidenhain TNC 530 Fabr. Operating hours spindle 10220 hours Accessories: Chip conveying. Cooling water system. Probe Renishaw OMP 60 Cooling by spindle Spindle Cooling Machines vice. Miscellaneous accessories. Operating instructions Delivery time: August 2024 Length: 2700 mm, Height: 2930 mm, Width: 2210 mm, Weig ...

Key data: 500 mm, 500 mm, 500 mm

MATSUURA H.PLUS-300 PC-5 4 Axis Horizontal Machining Center Year of Make: 2008 Control: FANUC /MATSUURA G-Tech 30i Machine number 17758 Travel X – 500 mm / Y – 500 mm / Z – 500 mm B-Axis 360,000 Spindle new April 2023 Equipment: MATRIX tool magazine with 240 seats Pallet storage for 5 pallets 300 mm x 300 mm and set-up station Spindle SK 40 Speed 50 – 15,000 rpm. NC rotary table as B-axis rapid traverse and feed rate 50 rpm. Probe RENISHAW OMP 60 Tool breakage detection Rotating viewing panel Cutting force monitoring Pressure Load Cell for Tool Length Measurement Coolant system KNOLL tank capacity 1,400 l Scraper belt chip conveyor with lifting pump and chip removal Coolant supply through the spindle 70 bar External cooling 1.4 bar Filter system SF1000/Turbo Cooling Water Recirculating Cooler VWK 70 Coolant spray gun Air nozzle on the headstock Coola ...

Key data: 500 mm, 500 , 500

MATSUURA H.PLUS-300 PC-5 4 Axis Horizontal Machining Center Year of manufacture 2007 Control: FANUC /MATSUURA G-Tech 30i Machine number 17232 Travel X – 500 mm / Y – 500 mm / Z – 500 mm B-Axis 360,000 Spindle new November 2020 Hydraulic power unit new 2021 Tool changer overhauled 2021 Oil cooler for spindle new 2023 Equipment: MATRIX tool magazine with 240 seats Pallet storage for 5 pallets 300 mm x 300 mm and set-up station Spindle SK 40 Speed 50 – 15,000 rpm. NC rotary table as B-axis rapid traverse and feed rate 50 rpm. Probe RENISHAW OMP 60 Tool breakage detection Rotating viewing panel Cutting force monitoring Pressure Load Cell for Tool Length Measurement Coolant system KNOLL tank capacity 1,400 l Scraper belt chip conveyor with lifting pump and chip removal Coolant supply through the spindle 70 bar External cooling 1.4 bar Filter system SF1000/ ...

CONTROLS   CNC controls HEIDENHAIN TNC 640 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 5   X-axis travel: 640 mm   Y-axis travel: 250 mm   Z-axis travel: 400 mm   rotating range B-axis from: 105 °   rotating range B-axis up to: -105 °   rotating range C-axis from: 0 °   rotating range C-axis up to: 360 °   distance spindle nose - table surface (max.): 450 mm TABLE   workpiece load (max): 60 kg SPINDLE / HEAD   spindle revolutions (max): 42000 /min TOOL MAGAZINE   number of positions: 90 ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2370 mm   ...

GeneralTravelling column machine; Control: CELOS with Siemens 840D sl Operate Working area 1Longitudinal3000 mmCross1100 mmVertical1050 mmFeed drives:Feed rate X / Y / Z42000/42000/42000 mm/minRapid feed X / Y / Z42/42/42 m/minNC-swivel head (B-axis)Controlled NC-swivel milling head (B-axis) with clamping in position. Continuously positioning NC swivel milling head with integrated motor spindle for 4/5 axes positioning and simultaneous machining. Swivel torque: 3,300 / 2,300 Nm // 2,433 / 1,696 ftCabineFull protection cabinSpindle speed 15,000 rpm, 200NmMotor spindle speedMASTER® HSK-A63 Spindle speed 20 - 15,000 min-1 Output 46 kW / 30 kW (62 hp / 40 hp) Torque 200 Nm / 130 Nm (148 ft lbs / 96 ft lbs) (40 / 100 % duty cycle)Rigid table with integrated rotary axis (leftside)Rigid table with integrated round table Ø 1050 mm // 41.3 in located left side of table table load max. 1,200 kg  ...

Travel distances: 500 x 450 x 400 mm [ X x Y x Z ] Number of axles: 5 Rotary swivel table HEM 500 U 3+2 Control: Heidenhain iTNC 530 Spindle holder: ISO 40 / BT 40 Spindle speed: 12000 rpm Tool changer: 30 - fold Drive power : 20 kW Torque : 75 Nm Rapid traverse: 30 m/min Spindle cooling Conveyor Diameter 500 mm IKZ 20 bar ITC 5X Intelligent Thermal Control Oil trap Minimum quantity lubrication Oil mist extraction Blowing air through tool screw Mobile handwheel Glass scales Encoder B-axis Encoder C-axis Tool probing system (TS27R OMP40 Probe

CNC HORIZONTAL MACHINING CENTER Condition Used Good Condition Control Type Siemens 840D X Axis Stroke 630 mm Y Axis Stroke 800 mm Z Axis Stroke 850 mm N. pallets 12 Table dimensions 500 x 500 mm Max. workable weight 600 Kg Spindle speed 18,000 rpm Cooling lubricant through spindle center 80 bar Tool holder HSK-A63 Tool magazine 303 positions Renishaw OMP60 infrared probe Continuous table 360,000 positions Magazine for round pallet RS12 Accessories Chip Evacuator, High Pressure

GeneralUniversal machining centre New DMG MORI Design; Control: CELOS with Heidenhain TNC 640 Working area 1Longitudinal400 mmCross400 mmVertical375 mmTechnical DataFeed rate longitudinal/transverse/vertical50000/50000/50000 mm/minRapid traverse longitudinal/transverse/vertical50/50/50 m/minTool changerType of magazineChain Type of gripperDouble gripper Number of tools60 Max. tool weight6 KgMax. tool length300 mmMax. tool diameter with occupied adjacent pockets80 mmMax. tool dia. with free neighbouring pockets130 mmFloor space/WeightWeight approx.6800 KgDimensions (L x W x H)6,21 x 6,58 x 2,69 (6,21 x 7,38 x 2,69) mSpindle speed 28.000 rpm HSK-A63Spindle speed 20 up to 28.000 U/min Motor spindle with shaft cooling power 30/20 kW // 40.23hp/ 26.82 hp (40/100% DC) torque 40/27 Nm (40/100% DC) tool clamping HSK 63 according to DIN69893 (different from standard)Chain-type tool magazine 60 po ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minPalett changer with2 PalletMovement X / Y / Z560/560/660 mmMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)3,1 x 4,86 x 2,84 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWWeight approx.11100 Kg(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

GeneralVertical Machining Centres; Control: Control F0iMF CharacteristicsTable surface1400 x 560 mmMovement X / Y / Z1100/560/510 mmSpindle taperBT 40 Tool Magazine with60 PositionsDrive power (25% DC)15 kWDrive power (100% DC)11 kWSpeed max.12000 rpmMaximum load (table centre)1000 KgRapid feed X / Y / Z36/36/30 m/minDimensions (L x W x H)3,19 x 2,76 x 2,94 (3,82 x 3,58 x 3,01) mWeight approx.5500 KgStandard spindle 12,000 min-1, 15/ 11 kWStandard Spindle 12,000 min-1, 15/ 11 kW Spindle speed: 12,000 min-1 Output: 15/13/11 kW (20/17.33/15 HP) (25%ED/30min/cont) Torque: 119/70/57 Nm (87.76/51.62/42.04 ft·lbf) (25%ED/30min/cont)Spindle Taper 7/24 Taper #40/ Grip MAS Spindle Taper 7/24 Taper #40/ Grip MAS This specification uses the spindle No. 40 7/24 taper / Grip MAS tool holder. The grip type and retention knob type of ATC are specified separately.Retention Knob: Special (Center-Throug ...

Key data: 1015 mm, 510 mm, 675 mm

Machine Details Stock-No. 1105-03923 Type of machine Machining Center - Vertical Make MIKRON Type VCE 1000 Pro Year of manufacture 2006 Type of control CNC Storage location FRANCE Country of origin Switzerland Delivery time immediately Freight basis ex stock HAGUENAU FRANCE Technical details x-travel 1015 mm Y-Travel 508 mm Z-Travel 675 mm CNC-control Heidenhain iTNC 530 max. distance between table and spindle-nose 775 mm table-size 1020 x 620 mm max. table load 1000 kg spindle taper ISO 40 spindle turning speed range max. 14,000 rpm Feed stepless 24 / 24 / 20 mm/min Rapid Traverse 24 / 24 / 20 m/min drive capacity - spindle motor 18 kW tool change unit 24 Pos. voltage 400 V total power requirement 35 kVA Weight of the machine approx. 5 t dimensions of the machine approx. 2.86 x 2.60 x 2.70 m Additional information MIKRON VCE 1000 PRO - 3-D Measuring butt ...

GeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Working area 1Longitudinal350 mmCross420 mmVertical380 mmTechnical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWTorque (100% DC) 41 NmTorque (40% DC) 48 NmSpeed range 20 - 15000 rpmSpindle taper BT 30Clamping System ISO 7388-3 - JD30ToolchangertoolchangerType of magazine WheelNumber of tools 15TableTable surface 740 x 420 mmMaximum load (table centre) 400 KgPreparation NC-Devider EA510 indirectPreparation 4.th axis Lehmann EA 510.L indirect measuring System Attention: Customer specific optimisations and adjustments are not part of delivery!Chip removal package with chip conveyorChip removal package with chip conveyor conte ...

Inv. Num. : 7212 Type: MF 630C Producer: Quaser Created: 2015 Parameters: Control system: Siemens 828D Table diameter: 500 mm Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Cone: SK 40 Maximum tool length: 280 mm Workpiece diameter: 630 mm Maximum tool diameter: 76.2 mm Max. tool weight: 7 kg Machine weight: 8750 kg Equipment: Tools Workpiece Probe Renishaw OMP40 ECO Cooler Rinsing gun Rinsing chips from the work area Spiral conveyors

DECKEL MAHO DMC 63 V CNC vertical machining center was built in Germany in 2005. The machine used in series and unit production, is characterised by its high machining capacity and stable construction with a reinforced work table, which ensures the highest possible precision in milling. The installed FANUC 180i-MB CNC controller additionally guarantees trouble-free operation of the machine and the use of its full potential and capabilities. The DECKEL MAHO GILDEMEISTER CNC machining center has been serviced on an ongoing basis and has worked for 26040 hours to date. Technical data of the DECKEL MAHO DMC 63 V milling center - work table dimensions (L x W): 800 x 500 mm - feed rates in the X/Y/Z axis: 630/500/500 mm - positioning accuracy of the X,Y,Z axis: 0.010 mm - maximum spindle rotational speed: 10000 rpm - spindle taper: SK 40 - 24-position tool magazine - operating hours: ...

with CNC-path-control: HEIDENHAIN type: TNC620 HSCI FS for axes: 3 x-travel: 1020 mm y-travel: 560 mm z-travel: 600 mm table surface area: 1000x560 mm table load: 1.35 t tool magazin:: numbers of tools: 40 max. tool diameter: 76 mm max. tool-dia with free toolbox: 125 mm max. tool length: 305 mm max. tool weight: 7 kg milling head: spindle taper:: SK40 spindle turning speed - stepless: 100-16000 U/min Power: 14.75 KW feeds -stepless-: 16000 mm/min rapid motion -longitudinal/cross/vertical: 40 m/min dimensions of the machine ca.: 3x2.3x2.6 m weight of the machine ca.: 6.8 t Coolant through spindle: pressure: 18 3D measuring tracer: RENISHAW OMP40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Machining center Hartford S - plus 10 is in very good technical condition, it is possible to see it in operation. Other informations: - control system Heidenhain TNC640 +15 LcD - Co-04 spindle cooling - cooling nozzles around the spindle - spindle blow through the air - oil separator (standard type - container form) - centralized automatic lubrication system - chip conveyor - manual - OMP60 optical workpiece probe included Manufacturer HARTFORD Machine type S - plus 10 Year of production 2016 Basic parameters 1150 x 520 mm Technical parameters: Table clamping surface: 1150 x 520 mm Longitudinal table movement - x axis: 1020 mm Transversal table movement - y axis: 520 mm Table vertical movement - z-axis: 550 mm Spindle taper: 40 Spindle speed: 12000 rpm Seating capacity: 24 pcs Max. workpiece weight: 700 kg distance from spindle end to table center :: 100-650mm  ...

Key data: 800 mm, 700 mm, 610 mm

Inv. Num. : 7212 Type: MF 630C Producer: Quaser Created: 2015 Parameters: Control system: Siemens 828D Table diameter: 500 mm Number of synchronized axes: 5 pieces Maximum vertical spindle speed: 12000 1/min X-axis travel: 800 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Cone: SK 40 Maximum tool length: 280 mm Workpiece diameter: 630 mm Maximum tool diameter: 76.2 mm Max. tool weight: 7 kg Machine weight: 8750 kg Equipment: Tools Workpiece Probe Renishaw OMP40 ECO Cooler Rinsing gun Rinsing chips from the work area Spiral conveyors

Key data: 660 , 660 , 660

CNC controller: SIEMENS 840Di Axes X-axis travel mm: 660 Y-axis travel mm: 660 Z-axis travel mm: 660 B-axis degrees: 360º (0,001º) Feed rates m/min: 60 Rapid traverse m/min: 60 Worktable Number of pallets: 2 Table dimensions mm: 500x500 Maximum workpiece size (D x H) mm: ø700x850 Max. workpiece weight kg: 400 Spindle Spindle speed rpm: 40 - 12.000 Cooling Cooling through the Spindle Center bar: 70 Tank capacity: 1.400 Tool system Tool holder: SK-40 Big+ Tool magazine slots: 360 Max. Tool Diameter With free neighboring places mm: ø150 With occupied neighboring places mm: ø80 Max. Tool Length mm: 350 Max tool weight kg: 10 Equipment Electronic Handwheel Chip conveyor Infrared probe (RENISHAW OMP60) Rotating inspection windows Rinsing gun blowing air through spindle center Signal lamp High pressure pump Tool breakag ...

Description: 5 face head 30 tool ATC Tool length measurement Preparation for MMS-B optical type OMP60 Spindle thru coolant 5kw Chip conveyor Machine was used for very short hours after installation. Includes shipping to any major seaport in the world.  , z-motion: 660 mm, x-motion: 3,200 mm, y-motion: 1,400 mm, control: Mazatrol Smooth G, table surface area l x w : 3,000 x 1,250 mm, taper: MAS BT 50, toolchanger positions: 30, turning speed range: 10,000 rpm, rapid motion: 32 x 40 x 30 m/min, total power requirement: 30 kW, weight approx.: 27,168 kg, Approx. Onsite Dimension. (l x w x h): 8,970 x 3,864 x 4,900 mm

The KERN Pyramid Nano vertical machining centre, crafted in 2013, excels in ultra-precise machining tasks. It has a 3-axis setup with a high-performance Heidenhain control system. The spindle reaches 50,000 rpm with an HSK E25 tool holder, perfect for detailed work. A 32-pocket tool magazine offers tooling versatility. It includes a Renishaw OMP400 probe and BLUM Laser system. MQL, chip reservoir, and EROWA Power chuck add to its functionality. Contact us for more information.