oil mixing used for sale

Description: Collection volume: 240 l Approx. Onsite Dimension. (l x w x h): 3,200 x 1,300 x 210 mm, weight approx.: 100 kg

Description: Kaeser AIRBOX CENTRE 550 with integrated air dryer and air receiver rated power: 3 kW air flow: 255 l/m working hours: 2811,2533 under load max.working pressure : 10 bars piston pump replace with brand new one in 2021! Kaeser C-Service on 06.10.2022. regulary maintained service manual: unavailable The innovative AIRBOX and AIRBOX CENTER The AIRBOX and all-in-one AIRBOX CENTER – which features an integrated compressed air receiver, refrigera tion dryer and optional filter equipment – are delivered with a control cabinet and ready for immediate operation. The use of energy-saving IE3 motors makes compressed air generation particularly efficient Oil-free compressed air This results in the following advantages for special ap plications: the compressed air quality corresponds to the quality of the intake air. No contamination is caused by the compression process. This ena ...

Description: The cost-effective and permanently reliable solution to the problem is usually the oil/water separation for dispersed condensates. The purified water fulfils the legal regulations for sewer discharge. Approx. Onsite Dimension. (l x w x h): 590 x 590 x 1,170 mm, weight approx.: 58 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 500 x 500 x 500 mm, weight approx.: 10 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 500 x 500 x 500 mm, weight approx.: 10 kg

Description: Mini CPN dispenser with meter and self-priming pump Self-reflexive weapon 2 meter suction hose 4 m long reinforced hose that connects the regulator to the gun. check valve Connect 2 pieces. Gaskets and brackets Approx. Onsite Dimension. (l x w x h): 500 x 500 x 500 mm, weight approx.: 10 kg

Description: - Approx. Onsite Dimension. (l x w x h): 400 x 300 x 600 mm, weight approx.: 50 kg

Filter system, oil mist separator, oil mist separator, air filter, mist separator, oil mist filter, oil and emulsion mist separator, suspended matter filter, oil mist air purifier -Manufacturer: AOF Air-O-Filter, oil mist separator filter system type AF-10P with base frame -Engine: 0.2 kW -Filter capacity: 11 m³ /min (660 m³/h) -Pipe connection: Ø 150 mm -Quantity: 1 piece available -Total dimensions: 900/480/H1830 mm -Weight: 81 kg

Description: Oil mist extraction Handte Air volume: 1,000Bm³/h Filter area: 0.18m² including stand 1x EURO pallet with suction (without overhang, height 1.10) Tripod: 0.65m x 0.65m x 2.0m Approx. Onsite Dimension. (l x w x h): 650 x 650 x 2,000 mm, weight approx.: 120 kg

Year of production 2007 Telescopic extension SK 1000/40-50 4 x heating tape on the inlet and outlet sides and on the top and bottom of the nozzles Collecting container with a capacity of 10 liters Unloading unit A PBA SA 1000x1500 tandem Supply stand Electro-hydraulic scissor lift table Operating computer: Rittal housing 600 mm x 380 mm x 210 mm

Description: Collecting volume 1110 litres, load capacity 1300 kg, serial number 1478/09, with digital flow meter Approx. Onsite Dimension. (l x w x h): 1,750 x 1,160 x 1,420 mm, weight approx.: 200 kg

Oil pan, steel pan, steel construction primed Dimensions: 9000 x 2100 mm (LxW) Height of side walls: 100 mm Material thickness: 6 mm

Koppens oil filter system, type: CMF, machine number: CMF-007, 380 V, 3 Ph, 50 Hz, 4 A, 1.21 kW, 850 kg, diameter filters: 150 mm, total dimensions: 1950 mm x 1400 mm x 2200 mm.

Description: The three squeezing machines have an extraction capacity of 400 kg/hr (for sunflower oil) and are composed of 4 worm screw extruders with an external case made of interchangeable modules in hardened steel. Each individual extruder is completely modular and allows for the identification of a single component that may be damaged in order to replace it easily and economically. These three machines require half a day per week for cleaning and inspection of consumable parts, which are located at the front, where the pelletized product comes out, and in the thrust bearings. The machine has been perfected over time to achieve maximum extraction potential (as far as sunflower seeds are concerned) and to minimize wear on the various parts. It is possible to change the order and composition of the individual rings that make up the case for the processing of other oilseeds (in this c ...

NNP 1500l mixing vessel Stainless, 1500l mixing vessel, jacketed, top mounted motor, scrape surface agitation, 3Ph

General SKU354T1388 LocationBarneveld MakeUnknown (missing name plate) Year of constructionunknown Main Features Motor1.1 KW Width300 mm Specified Features - Mixing mill Motor1,1kW, 220/380Volt, 1390rpm Mill width300mm Mixing millcheck Mill diametre145mm and 150mm Mechanical mill adjustcheck MaterialStainless steel 1.4305 (303), stone Information Mounted on legscheck With switchcheck(as is) Floorspace0,75x0,75m Total height1,25m Weight200kg Extra SpecificationsFunnel 360x230mm, height 220mm Mixing millsLIPSPlastic machinery > Mixing millsBrand > LIPS What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU402S949 LocationBarneveld MakeBuss TypeLR 100-19D Mach.No.438004-2 Main Features Motor45 KW Inlet diameter100 mm L/D21 Specified Features - Mixing extruder Single screw mixing extrudercheck Screw dia.100 mm L/D2100/100 With jacketcheck Screw speed300 rpm Inletdia. 100 mm (5x) Screw can be heatedcheck Max. temperature180 °C MaterialStainless steel Information Year of construction1993 Mounted on framecheck Total height1,5 m Floorspace3,3x1,5 m Weight2200 kg Extra SpecificationsEasy to clean. Material: 1.4308 and 1.4122 Mixing extrudersBussExtruders > Mixing extrudersBrand > Buss What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machi ...

General SKU354T1381 LocationBarneveld MakeHosokawa Bepex GmbH TypeBX 200 T No.18227-01 Year of construction2009 Main Features Motor3 KW Inlet diameter120 mm Specified Features - Mixing extruder Granulatorcheck Rotor granulatorcheck Rotor sizesDia: 200x50 mm Ring diecheck Die sizesDia: 200x55 mm Number of dies available:2 Die perforationDia: 2mm (4x), Dia 1,5mm(2x), 1,2x6mm Motor3kW, 220-240/280-420Volt, 1430 rpm With pre-mixercheck With motor1,5 kW, 220-240/380-420 Volt, 1400rpm InletDia: 120 mm (2x) Mixing extruders MaterialStainless steel 1.4306 (304L), Stainless steel 1.4401 (316) Information Mounted on framecheck Mounted on wheelscheck With switchcheck With switchgearcheck(as is) Weight680 kg Floorspace1,3x1,05 m Total height1,75 mMixing extrudersHosokawa BepexExtruders > Mixing extrudersBrand > Hosokawa Bepex What you can expect from Foeth: -- Machine ...

Screw (small) Drawing no. 14203-461D1

Used containers Good condition Dimensions see photo

3 roles standing mixer with control panel and mixer Manufacturer: King & Günther GmbH Type: Rexoplast Serial No.: 6306075 Year of construction: 1973 Mixer is equipped with Munkadur coating inside! In good condition!

Bull gear

Pinion Drawing No. 14240-113 z=26

Bull gear z=82

Pinion Drwaing No. 14272 - 167 C1 z=20

Pinion Drawing No. 14821- 167 C9 z = 23

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Mixing installation on steel construction with pan mixer (150 l. net capacity, 5,5 kW drive, 0,55 kW outlet), skip hoist (1,5 kW drive, incl. winch, rope and rails) and switchgear cabinet. In very good condition, hardly used after full refurbishment.

Break

Electronic water dosing device with temperature display Your advantages: fast and exact input of the water quantity Clear control panel with large, bright display compact and flour dust-proof stainless steel housing easy connection to an ice water system with Automatic Wiedehol Technical data Dosing volume range: 0.1 l - 999.9 l Temperature accuracy: display only Dosing accuracy from 1 l: +/- 0.1 l Water flow at 3 bar: up to 30 ltr./min Water connection: 3/4" external thread Power connection: 100 - 240V ; 50hz Dimensions W x H x D: 200 x 300 x 130 mm Visit our Milbrandt Outlet with many bakery machines and appliances!

Sugden Engineering Twin propeller Mixing Vessel. 200 L Stainless vessel, 2 top mounted paddle stirrers, Vessel 45 degree sloped base to outlet.

On 4 castors-standing stainless steel mixing tank with propeller agitator Material: V2A (1.4301) Container has a hinged lid and a spout at the bottom with a valve DN 25 drawn forward. In very good condition!

From small through medium to big concrete batching plants, Prometal presents the most efficient ways of production of concrete with great results of high-quality concrete. Our customers can choose between 15 cubic meters per hour to 120 cubic meters per hour concrete batching plants. Long-lasting structures and stable design provides our customers with long term profitable investment with no regrets. The aggregate bunker is designed and manufactured to operate under heavy working conditions for a long time. There are 2 electro-pneumatically controlled discharge gates, which provide easiness and choice in the discharge together with suitable elevation. Aggregates are weighed by 4 units of load cells. Electric installation of concrete batching plant includes all electrical connections of voltage, controlling and part for measuring of the plant. All installations and sa ...

P52 - used approx. 6-10 m³ / 6,000 10,000 litre polyester tank / fibreglass tank, mixing tank, brine tank, aboveground, upright, manufacturer Reich, in good condition. Dimensions: diameter approx. 2.50 m x height 2.50 m Vertically standing polyester tank, mixing tank, with funnel for loading salt or other media, underside completely closed, incl. mixing station. As pictured, could not be examined technically. Price upon request. Transport can be arranged at low cost. Also we can modify the tank to suit your demands, just ask us. It is not possible to update all our advertisements daily. Since our inventory is changing continuously, it may be that this tank has already been sold but a similar one is in stock. Please give us a call or write, so that we can advise you personally. More information and offers on our site: profi-tanks(dot)de

front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused

rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused

NIP adjustment nut Drawing No. 14240-216E3

NIP adjustment screw Drawing no. 14240-517

Worm gear (small) Drawing no. 14240-546D1

Powder mixing plant Ytron Dr. Karg, built in 2012 and with Flow tank. Capacity up to 10 to/h The powder was treated via pipes into the flow vessel. The whey or milk powder mixture was via the plate heater and hot water Cycle in batch operation with the basic tanks set and then released for further processing. With frame and staircase a.) With a GEA plate heater for treatment the powder water solution. Hersteler FA. GEA TDS GmbH, Sarstedt Type: VT 20 CD-9-C-16 170/7412 No. 3600 4074, year of construction 2012 b.) With wall-mounted control cabinet system Siemens S 7 for process technology, CIP tank system and Control of cleaning paths c.) With 1 CIP system for the standing tank as a 1-tank cleaning system for the Batch operation and for the powder mixing plant Self. Content CIP tanks 15,000 l insulated, deformed inwards in the upper area with valve no ...

Product number: 1163 Mixer: 2AM1000L-92-08624 Speed: 2 speeds, 20/40RPM Power: 3 x 380V, 50Hz, 13kW Dimensions: 2400 x 1300 x 2950 mm Including lifter for 200L bins Meat pomp: 250-120V1700 Diameter screw: 250 mm Hopper: 1700 litres Dimensions: 1400 x 2500 x 2600 mm Including Baktec-matic water dosing Grinder: 300 mm hole plates Dimensions: 1200 x 800 x 2300 mm

Mixing plant EKATO (for anhydrite screed, milk of lime and other media) Stainless steel mixer in 6 m container. , 80-122 RPM. Control Schoregge GmbH complete Control, balance, etc. Mass of the mixer: diameter: 1, 60 m, height: 0, 80m, volume: 1,600 l

Mixing soft / empty suction valve Input / output diameter: 38mm

Mixing soft / empty suction valve with holder and magnetic valve Diameter input and output: 38 mm

Mixing soft / empty suction valve from aluminium with plexiglass disc Diameter input / output: 38mm

Manufacturer: BARTEC Type: 250 year: 2004

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Manual nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 106kW DC variable speed motor. Very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible coupling, 2 x 68kW DC variable speed motors. Variable friction ratio/roll speeds. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, Unidrive gearbox with flexible couplings, single 138kW fixed speed motor. Fixed friction/roll speed. In very good condition.

QTY 1 x Berstorff 2100mm x 660mm dia two roll mill, Motorised nip adjustment, peripherally drilled rolls, FULL Unidrive gearbox with flexible couplings, 2 x DC variable speed motors. Variable friction ratio and roll speed. In very good condition.