oil free air used for sale

Recon in stock and also available in used

Fuel oil tank diesel tank steel tank tank system with 20,000 litres capacity, according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid, is used, emptied inside and cleaned professionally and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is re-primed and painted on the outside. L = approx. 6.90 m / D = 2.00 m / weight approx. 4.2 to. / ex works, freely charged. General: The price for the gas station is valid from the Söhrewald plant near Kassel, ...

- brand new - 20,000 litres steel tank - storage tank - diesel tank according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 6.90 m - D = 2.00 m - weight approx. 4.2 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repaint - dark grey / RAL hue. (On request, other RAL col ...

Radial piston motor, hydraulic motor, oil engine, hydromotor CALZONI / SPERRY VICKERS / IAM Bery7zxqmc dimter DKV III, dimter DKV 3 dimter DKV V, dimter DKV 5

Oil-water separation system / separator, for compressors KT06 000 01 Replacement filter: XV KT06 AF2

release agent spray unit Electr. connection: 400 V 3-ph, 16 A Compressed-air connection:6 bar, oil-free Working pressure:0,1-0,5 bar renovated

Recon 944768/20-2123 Draw B20-10-164 10bar shell/5bar tube Test 15bar-7.5bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Recon 994730 Built in 1994 1941/2200 l/min 400/450 L/min 10bar ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts of different manufacturers/types available. We are happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

Emulsion fission system, oil-water separation system (for the de-oiling of condensation in compressors) The cost-effective and permanently reliable The solution to the problem is usually the oil/water Separation for dispersed condensates. that cleaned water complies with the legal Rules on channel discharge

The NOVOTECNIC EUROPA FTD-6 E-39 oil mist separator was built in 1992. Technical parameters: - capacity: 2000 l - nominal filter capacity: 500 l / min - filter unit:> 0.003-0.005 mm - connection power: approx. 15 KW - machine dimensions (L x W x H): 4000 x 1200 x 2800 mm - weight: approx. 2000 kg

Product number: 1993B Type: GoldFryer TBM630/5000TH Serial number: 10050409 Year of construction: 2005 Belt width: 630 mm Frying length: 5000 mm Heating: thermic oil Power: 3 x 400V, 50Hz, 11kW Dimensions: 9100 x 1900 x 2900 mm Teflon infeed, hold down belt, circulation pump, electric hoists, oil level control, CO2 fire surpression system

An original sealed 208 liter barrel with gear oil is offered. Manufacturer Totoal Type Fluids GIII Applications Synthetic lubricant for gearboxes and hydraulic systems, if a GM Dexron® III fluid is prescribed. Specifications Total Fluide G 3 MB release 236.9 Volvo 97341 MAN 339 Type Z1/V1/L1 Voith 55.6335.35 ZF TE-ML 04D, 09 (except car steering systems with ZF vane pumps), 11B, 14A Dexron® III G, III H Ford Mercon Allison C4 The barrel is originally sealed!

liter capacity: unbkt l coolant: unbkt pressure: unbkt t total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Extraction system for wall mounting Manufacturer Plymoth Special electrostatic precipitator system without paper filter! Type EFO5000 Electrostatic precipitator, function via electrical charging of dust particles. Used to extract oil mist. Details according to photos. Special price

Oil pump, part no. 0R2770

Recon Part Number: 1217 4852 (6.441.0.730.012.6) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

RECON Part Number: 1216 8348 6.420.0.940.006.7 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

NEW Part Number 1227 7152 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

RECON Catalogue Number: 4.01.102-04 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

RECON Part Number: 103178 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 209L.

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 barrels of 209L each. approx. 10 years old

ATLAS COPCO 2908850800 ORIGINAL ROTO-H/PLUS 2 canisters á 20 L. approx. 10 years old

New oil tank 100,000 liters for sale. Above-ground heating oil tank system 100,000 litres, D=2,900 mm Above-ground tank systems from Dehoust according to EN12285-2 (CE), class B, tank type D, for heating oil. Cyl. Storage tank made of steel, double-walled, with filled control liquid Glymin NF (approval no. BAM 1.4/12481-5.1/6035). Standard with a Dom DN 600 with dome cover, gasket and screws. Container inside raw, outside all parts sandblasted and with simple primer. Incl. synthetic resin paint on the outside in RAL colour. Complete tank system equipped with: - welded-on saddle feet - optical leak detector type LAS, approval no. Z-65.24-381 including Test and control liquid for refilling. (up to Ø2000mm pre-assembled) - Tank fitting for heating oil (pre-assembled up to Ø2000mm), consisting of: Filling tube 2" with TW closure Suction combinatio ...

-Thermal oil magnetic pump with motor -Pump manufacturer Sterling Fluid Systems Model: ZTTZ 40160 / AP 1EO 1B 2 Engine see pictures

Used oil collection container -Container: Ø 660 x 1250 mm -Container: tiltable -Own weight: 30 kg

Bottling Line for OIL • Speed: 1.000 Bph • Direction: Clockwise • Filling Monoblock COSTEC • Model: SRV 9.8.1 • Year: 1999 • Rinser 9 clamps • Fixed nozzle • Type treatment: Single, With Air • Filler 8 Valves • Type of filling: Volumetric • Capper Single head • Type of cap: Screw cap 31.3x24 • Capsuler ENOS • Year: 2004 • Pvc capsules • Plateau capsule distribution • Labeller OXE • Year: 1999 • Model: QUASAR • Number of heads: 4 • Number of stations: 2 • Type of label: Adhesive • Application: • Front label • Back label • Accumulation table • Safety protections

- Lubricat. oil pump oil pump MWM 12304041 - Suitable for several motors - Please note! Price per piece! - 12304041 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and i ...

Oil Pump Oil Pump MWM 12319313 -for various MWM motors - 12520952; 1252-0952; 1252 0952 - Predecessor 12319313; 1231-9313; 1231 9313 ; 12152706; 1215-2706; 1215 2706 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engin ...

- Oil line oil pipeline MWM 12302232 - Suitable for several motors - Please note! Price per piece! - 12302232 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Oil cool oil cooler 12302852 MWM - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new techno ...

- Oil line MWM 12303498 - Suitable for several motors - Please note! Price per piece! - References -> 12303499 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integra ...

- Oil level control MWM 12480505 - Suitable for several motors - Please note! Price per piece! The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating new technolo ...

Key data: 75 , 10 , 11

BOGE screw compressor S 100-3 air-cooled Ready-to-use, automatic, with CE mark Specifications Effective delivery quantity of the entire system measured according to ISO 1217, Annex C 11.00 m³/min at maximum compressor overpressure 10 bar Nominal power main drive motor 75.00 kW Nominal power fan motor 2.20 kW Degree of protection/insulating material class of the motor IP 55 / F Operating voltage (compressor) 400 V / 50 Hz Control voltage (compressor) 230 V AC / 24 V DC Intake or ambient temperature (min... max) +5...+40 °C Compressed air outlet over intake temperature (at compressor) 12 K Cooling air volume flow (with duct connection) 9200.00 m³/h Residual oil content of compressed air < 3 mg/m³ Soundproofed design (according to dimensional drawing): M 3200.0970 Sound pressure level (according to DIN EN ISO 2151) 80 dB(A) Width / Depth / Height 2 ...

MAN oil pump, for engine 28/32 Part number: 6100565

IMO pump oil, for engine 28/32 Prt number: 623849

MANN Filter OIL, for engine 28/32 Part number: W1168/5

oil filter, for engine 28/32 Part number: BT564

Koppens oil filter system, type: CMF, machine number: CMF-007, 380 V, 3 Ph, 50 Hz, 4 A, 1.21 kW, 850 kg, diameter filters: 150 mm, total dimensions: 1950 mm x 1400 mm x 2200 mm.

Oil-bath gearbox IMA Type: 04.015

GE Fuel Oil Filter PN: WE021222 Drawing Number: 84A220402P9 4 units

Variable area flow meter for heat transfer oil, H250/RR/M40/HAT/ESK, Krohne, new -60% Special price ! The current price of a similar product is about € 2100 excluding VAT. If you have a UID number, we will gladly issue an invoice without VAT. We still have several identical units, but the quantity is ending. Buy more than 1 piece there is still a great discount. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in operation, is completely as new and in the original packaging. Technical data: - For heat transfer oil with 860 kg/m³. - Viscosity 1.23 mm²/s - Working temperature: 200°C - Working pressure: 5,0 bar - Measuring range 0-25 l/min - Connection G1 - Output signal 4 - 20mA - Made of stainless steel 316 - Max. working pressure: 70 bar - Max. Temperature: 300°C Function guarantee! For sec ...

Heating oil tank Tank system Diesel tank and other hazardous substances. 50,000 litres capacity according to EN 12285-2 standard, above ground, double-walled incl. officially recognized test certificate. Tank Environmental Protection Wozniack . Specialist company according to § 19 Water Resources Act (WHG) offers as follows. Storage tank 50,000 litres double-walled new according to EN 12285-2 standard . The container is new and will be equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling tube with TW closure (filling cap) and immersion tube, 1 bearing tube with dipstick and dipstick closure, 1 vent pipe with ventilation hood, 1 brand-new limit encoder with type approval (AIII)(new) 1 conductor Container dimensions Length 10.7000 mm Diameter 2500 mm Weight approx. 9.000 kg Of course, y ...

Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.

Nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.

UNI-KK 0-031-500 Dimensions: Cylinder length: 9.97 m Diameter 2.50 m Total length: 10,80 m Material: Material: Steel Tank above: - with manhole Dom 600 - with 2 crane eyelets - Leak control system with leak connections complete - with ventilation Cylinder: - 2 saddle plates - with Klöpperboden

There is one KV-2,5/25 and one KV 1,6-2/25 available, power machine 1/ 2: 2907/ 1745kW, year of construction machine 1/ 2: 1988/ 1979, there is also a chimney available.

Available in stock 12 x Oil filters Fleetguard LF691A. Suitable for CAT3412 (Cross-Reference: 1R-0716) New Surplus. Wrapped in Plastic.

Available in stock 1 x Used Boll & Kirch Duplex Filter and 1 x Used Boll & Kirch Lub. Oil Automatic Filter. The equipment was used in a HFO power plant. The equipment is used but is in good working conditions. Max all working pressure: 10 bar Max all working temperature: 80ºC