naber used for sale

Hardening furnace make NABER type 8 / LFabr. -No: 62604 built in 1984Technical specifications:Max. Temperature: 1260 ° CInternal dimensions approx. W x D x H: 700 x 900 x 1200 mmDrive power: 27 kWWith- Controller C8usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Naber Hardness Kiln 380 V 12 A max. 1260 C Length 1 m Width 0.87 m Height 1.47 m Temperature Processor TP 10 850 - 1250 C pre-programmed

Key data: 450 , 450 , 600

Convection chamber furnace electr. 450°C with supply and exhaust air system motorized Demonstration device, unused, 24 months warranty -Temperature max.; 450 °C -Volume of oven space: 120 liters -Outside: 1200 x 1470 x 1575 mm(W x D x H) -Oven space: 450 x 600 x 450 mm (W x D x H) -Controller C440, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: motor-driven supply and exhaust air system -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: max 10 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3Ph/PE 50 Hz, without RCD Documentation Visit in our warehouse by appointment.

Key data: 260 , 1250 , 1250

Circulating air chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and run-inchins Demonstration device, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs per 20 segments freely programmable -NtLog for controller Record data via USB stick -Temp. Uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air volume flow 125m³/h -Additional equipment: Motor-closing fresh air and exhaust air flaps Entry rails -Connection power 31.2 KW -Net weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We are happy to offer installation and commissioning.

Debinding and sintering chamber furnace, make Nabertherm type: LH 280/13 DBS temp. max.: 1300°C internal dimensions (w x d x h): 750 x 750 x 500 mm external dimensions (w x d x h): 1250 x 1750 x 2100 mm loading weight : max. 150 kg power: 44 kW heating: 5-sides heated control zones: 1 Process control controller: yes weight: 700 kg voltage: 400 V 3/N current consumption: 63 A - With an air heater under the furnace, pre-heated air with a temperature of up to 400°C can be flushed into the furnace chamber during the debinding phase. - Controllable cooling housing with autom. ball valve - Automatic exhaust damper - Automatic exhaust flap - Monitoring of fresh and exhaust gas volume flow, as well as furnace chamber pressure by differential pressure monitor.

Key data: 650 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 650°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 650 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 13 KW -Fan capacity : approx. 500 m³/h -Connection: 400V 3/PE 50 Hz, without RCD -Documentation Viewing in our warehouse by appointment.

Key data: 850 mm, 450 , 600

We always have convection comb stoves on offer. Convection chamber furnace electr. 850°C with manual lift door Demo unit, unused, 12 months warranty, immediately available -Temperature max.: 850 °C -Volume of furnace chamber: 120 liters -Exterior: 885 x 1420 x 1540 mm (W x D x H) -Furnace chamber: 450 x 600 x 450 mm (W x D x H) -Controller C540, 10 programs each 20 segments -Temperature uniformity: ± 5°C according to DIN 17052-1 -Additional equipment: -Motor-controlled supply and exhaust air flaps -Manual lift door, 1 hand operation -Permissible batch weight: 120 kg with distributed load -Slide-in strips included: for 2 levels -Connected load: approx. 12-13-14 KW (according to connection voltage) -Fan capacity : approx. 500 m³/h -Connection: 380- 400- 415V 3/PE 50 Hz, without RCD circuit breaker -Documentation Viewing in our warehouse by appointment.

Key data: 300 mm, 1200 , 670

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available -Model with wheels -Temperature max.: 300 °C -Volume furnace chamber: 1050 liters -Exterior: 1470 x 970 x 1920 mm (W x D x H) -Furnace chamber: 1200 x 670 x 1400 mm (W x D x H) -Controller C550, 10 programs each 20 steps Controller has Wi-Fi and app as standard -Horizontal, forced air circulation results in a Temperature uniformity according to DIN 17052-1 of better than +/− 5 °C in the empty usable space (with the exhaust air flap closed) -Permissible batch weight: 250 kg with distributed load -Gratings included: 4 pcs -Max number of gratings 14 pcs -Additional equipment: bushing for thermocouples I-Ø 44 mm -Connected load: max 9.3 KW -Fan capacity : approx. 500 m³/h -Connection: 380-415V 3/N/PE 50 Hz -Net weight : 450 kg - Documentation, CE declaratio ...

Pipe furnace with 5m long furnace section for heat treatments under inert gas atmosphere. Tmax: 1300°C On the Nabertherm website you can see a product video of this unique stove. It was originally operated vertically as a downpipe furnace. A horizon-wide use is of course also possible. The structure is clear: It is a nearly 6m long truss-like frame, on which six oven case elements are attached. These are hinged and inside runs the almost 6m long pipe made of Kanthal APM. Each furnace element has two thermocouples type S (platinum/rhodium). Kanthal APM is very resistant to oxidizing atmospheres.

Chamber furnace Manufacturer: Nabertherm Model: N161 Year of construction: 2000 temperature 1200 C kW: 30 A: 43.4 Hz: 50 V: 400 N: 3 Combustion chamber dimensions: approx. 54 x 40 x 85 cm Overall size oven: approx. 120 x 170 x 200 cm Weight approx. 950 kg verm. 6,955 operating hours Control: Controller C 40 An instruction manual is available for the control

Key data: 260 mm, 1900 , 1430

We always have convection comb stoves on offer. Demo unit, unused, 12 months warranty, immediately available With safety system for solvent-based substances according to DIN 1539 -Inside w x d x h 1000 x 1000 x 1500mm -Outside w x d x h 1900 x 1430 x 2315 mm -Capacity 1500 liters -Tmax 260°C -Controller P570/ 50 programs each 40 segments freely programmable -NtLog for controller recording the data via USB stick -Air circulation 3600 m³/h -Exhaust gas volume min. 390m³/h -Additional equipment: drive-in rails -Connected load 39 KW -Weight 1150 kg -incl. documentation, CE declaration We are happy to offer installation and commissioning. Viewing in our warehouse by appointment.

Key data: 1280

Vertical tempering furnace Electric 1280°C Nabertherm N5000/S Used high chamber furnace, overhaul possible on request - Tmax 1280°C - Capacity 5000 liters - External dimensions w x d x h 1600 x 2200 x 4000 mm - Net weight 7000 kg - Rated power 198 KW - Documentation Viewing possible by appointment at any time.

General SKU044B260 LocationBarneveld MakeNabertherm TypeN-20/H No.88738 Year of construction1994 Main Features Materialstone Volume20 Ltr. Max.temp.1340 °C Specified Features - Drying oven Drying oven(1x) Max. temperature1340 Degr. C. Number of compartments:1 Capacity20 Ltr Internal width260mm Internal depth260mm Internal height270mm Electric heatingcheck Electric capacity7 KW, 500 Volt Number of doors:1 Materialstone Information Mounted on framecheck Floorspace0,9x0,9 M Total height1,6 M Weight300 KGDrying ovensNaberthermDryers > Drying ovensBrand > Nabertherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 260 mm, 1250 , 1250

We constantly have new and used convection chamber furnaces on offer. Give us a call! Convection chamber dryer electric 260°C, Nabertherm KTR 3100 with C540 and drive-in channels and exhaust fan Demo unit, unused, new machine warranty, immediately available Convection oven, high air exchange for fast drying processes -Inside w x d x h 1250 x 1250 x 2000mm -Outside w x d x h 2150 x 1380 x 2960 mm -Capacity 3100 liters -Tmax 260°C -Controller C540/ 10 programs each 20 segments freely programmable -NtLog for controller recording the data via USB stick -Temp. uniformity according to DIN 17052-1 up to +/- 3 °C -Air circulation 6400 m³/h -Exhaust air flow rate 125m³/h -Auxiliary: Controlled cooling (exhaust fan) Entry rails Bushing 40 mm -Connected load 27 KW -Weight 1800 kg -not suitable for solvent-based substances -incl. documentation, CE declaration We ar ...

Key data: 450 mm

We always have convection chamber furnaces on offer. Give us a call! Very good condition, 12 months warranty -free-standing, on base -Temperature max.: 450 °C -Volume of furnace chamber: 250 liters -Exterior: 1002+225 x 1636 x 1860 mm(W x D x H) -Furnace chamber: 600 x 750 x 600 mm (W x D x H) -Controller C280, 9 programs each with 4 segments -Temperature uniformity: ± 6°C according to DIN 17052-1 -strong air circulation, air guide box for optimal air flow -Supply and exhaust air flap manual -Connection flange for supply air fan under furnace -Permissible batch weight: 125 kg with distributed load per rack -1 bottom plate incl. -2 slide-in plates additionally available on request -Connected load: max 13 KW -3phase -Documentation -Weight 610 kg Viewing in our warehouse by appointment.

K240/12 nabertherm . Foundry machines furnace, ovens Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand

General SKU044F208 LocationBarneveld TypeN-11/R No.79754 Year of construction1990 Main Features Materialstone Volume11 Ltr. Max.temp.1100 °C Specified Features - Drying oven Drying oven(1x), make Nabertherm Max. temperature1100 Degr. C. Number of compartments:1 Capacity11 Ltr Internal width250mm Internal depth400mm Internal height140mm Electric heatingcheck Electric capacity5,0 KW, 380 Volt Number of doors:1 Materialstone Information Floorspace0,8x0,5 M Total height0,5 M Weight90 KGDrying ovensNaberthermDryers > Drying ovensBrand > Nabertherm What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Key data: 850 mm

We always have convection chamber furnaces on offer. Give us a call! it 12 months warranty, from 2023, original packaging, in stock -500 liters -Max temperature: 850°C -with controller P570 ( 50 programs with 40 segments each ) - Process documentation on the customer's USB stick -Furnace chamber: W x D x H 750 x 1000 x 750 mm -Temp. uniformity +/- 5 °C according to DIN 17052-1 in the empty furnace room -Max 125 kg charging weight opt. Tray (not included) -Connected load approx. 28 KW -not suitable for solvent-based substances - Documentation, CE declaration Auxiliary: Controlled cooling (exhaust fan) Viewing in our warehouse by appointment. We stock new and used industrial furnaces. Get in touch with us!

K240/12 nabertherm . Foundry machines Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand

Two identical chamber furnaces are available. T. max.: 1280°C, internal dimensions: 350 x 350 x 250mm, volume: 30l. External dimensions: 1040 x 1030 x 1340mm, weight: 210kg. Heating capacity: 15kW, electrical connection: 3-phase.

General SKU383U1044 LocationBarneveld MakeNabertherm TypeRS 170/750/13S H2 No.232933 Year of construction2012 Pressure Vacuum possiblecheck Main Features MaterialGlass Volume25 Ltr. Max.temp.1300 °C Specified Features - Drying oven Drying ovencheck Vacuum drying ovencheck Max. temperature1300°C Number of compartments:1 Capacity±25 Ltr. Internal diameter115 mm Internal width2380 mm Electric heatingcheck Electric capacity13,5 kW, 400 volt Number of doors:1 With air circulationcheck With fancheck Suitable for nitrogencheck hydrogen With timercheck MaterialHeat-resistant stainless steel 1.4767, Glass Information Mounted on frameOn wheels With switchcheck Weight900 kg CEcheck Floorspace2,90x1,30 m Total height1,6 m Extra SpecificationsThe RS tube furnaces can be used for horizontal operation. This professional tube furnace can be optimally configured fo ...

Description: Machine number: 84201 Operating voltage: 380/400 V Frequency: 50 Hz Connection: 4.1 A Max. Temperature: 200°C Internal dimensions: 900 x 560 x 450 mm Approx. Onsite Dimension. (l x w x h): 3,000 x 1,200 x 1,900 mm, weight approx.: 500 kg

Description: Serial number 13880 max. temperature 1280° C 3.3 kW, 15 A Internal dimensions approx. 470 x 360 x 350 mm Approx. Onsite Dimension. (l x w x h): 800 x 800 x 700 mm, weight approx.: 200 kg, voltage supply: 220 V

Description: Serial number: 440634 Operating voltage: 230 V Frequency: 50/60 Hz Rated current: 15.7 A Connection: 3.6 kW Temperature: up to 1280°C Internal dimensions: 420 x 250 x 140 mm Approx. Onsite Dimension. (l x w x h): 700 x 700 x 650 mm, weight approx.: 70 kg

Description: Machine number: 172369 Operating voltage: 230 V Frequency: 50/60 Hz Rated current: 15.7 A Connection: 3.6 kW Temperature: up to 1280°C Internal dimensions: 430 x 250 x 160 mm Approx. Onsite Dimension. (l x w x h): 700 x 600 x 600 mm, weight approx.: 70 kg

Description: furnace power 15 kW maximum temperature 1280 C° , with CONTROL THERM MV5 control system , PC station and various accessories , . interior oven dimensions 350 x 250 x 560 mm weight approx.: 500 kg, Approx. Onsite Dimension. (l x w x h): 1,650 x 1,300 x 1,550 mm

max. temperature: 1100 Grad voltage: 230 V output: 3 kw range - high tensile: Innen 295x230x125 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Sink taps NABER Drive-6, black matt., Art.-No. 5011094, with Siros tap, 2 pcs

Low-pressure sink mixers NABER Drive-1, 4 pcs., coloured stainless steel, item no. 5011063

Sink mixer NABER Mio 1, black matt, Art.-No. 5011302, OVP

Sink taps NABER Dargo, polished chrome, 2 pcs., Art. no. 5011079, OVP

Sink mixer NABER Dargo, coloured stainless steel, item no. 5011061, OVP

2018 Forge from 60 to 400 Ton Forging and Annealing Furnace ATI furnace It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm Forge from 60 to 400 Ton Forging and Annealing Furnace

It is made for heat treatment of steel (originally 100Cr6 steel). Possible customers : automotive suppliers The last heat treatment on this line was made in 2018. For a better industrial usage, the supervision of the line need to be upgraded. The original constructor is FDI (Deleau Furnace), which was bought by ATI Furnace ati furnace nabertherm

Nitrogen Furnace nitrogen furnace Pit furnace, top condition. 50kW ele Max T. 950°C Anealing in hydrogen, nitrogen atmospere Batch size 800x1000mm run only for tests and start of production similar possible furnace REY, Naberther, CFI, SAIREM, SOLO, ALD, ECM, BMI, CERIC WISTRA, ELTI, ECM, NAGAT SAT, SAFED, SERTHEL, SLFI, MORGAN, OTTO JUNKER, CIEFFE Anlaßöfen mit Luftumwälzung Anwärmöfen Aluminium – Glühöfen Abschreckbäder Beschickungsanlagen für Druckgußmasch inen Drehherdöfen Doppelkammeröfen Draht – Glühöfen Durchlauföfen Elev atoröfen Glühöfen für verschiedene Einsatzarten Gas Nitrieröfen Härteöfen Härtebäder Herdöfen Hubbalkenöfen Herwagenöfen Haubenöfen Industrie Trockenanlagen Kammeröfen Kunststoff - Beschichtungsöfen Carbonitrieren Härten Vergüten Härten von Kaltarbeitsstahl Härten von Warmarbeitsstahl Induktivhärten Flammh ...

00790-2 R&D department for Lithium-ion battery manufacturing will be COMPLETELY dissolved The value of these fixed assets amounted to approximately 7.5 million euros at the time of new acquisition. Manufacturer: Werner Mathis AG Manufacturer: Eirich Gustav GmbH (see also List1 page 6 EL5 Profi-Plus Manufacturer: Robust Habicht Manufacturer: Digatron Manufacturer: Coherent Rofin B.V. Manufacturer: Keyence Inventory name Filling station: Glovebox Braun with scale, cooling unit, etc. Exhaust air scrubber FRIDURIT Neutralization plant FRIATEC Rena Technologies GmbH Lauda Dr. R. Wobser GmbH & Co. KG AFA Glass furnace Ball fall viscometer Solder fume hood Profilometer Battery test system BaSyTec CTS 32 channels CTS 1666 Battery test system BaSyTec CTS 32 channels CTS 1667 Battery test system BaSyTec CTS 32 channels CTS 1668 Vacuum pump Measuring  ...