muller 800 t used for sale

table diameter: 800 mm table load: 0,6 t table height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Circular Indexing Table dia 800 mm, motorized rotating, swivable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1050 mm turning diameter over slide rest: 730 mm turning length: 8000 mm turning dia. in gap: 1200 mm spindle diameter: 100 mm speed: 1.7-355 m/min voltage: 380 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 8000 mm y-travel: 2500 mm z-travel: 1000 mm control: Heidenhain TNC 355 taper ISO: 50 spindle speeds: 20 - 1800 mm voltage: 380 V total power requirement: 27,6 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: 860 steady: 860 total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 1740 mm turning diameter over slide rest: 1300 mm turning length: 16000 mm turning speeds: 4-180 U/min Rapid travel: chip conveyor: digital readout: steady: total power requirement: kW weight of the machine ca.: t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 6000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 9500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 (bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 5000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Al ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 5000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 9000 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 3000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 7500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 4000 (1500 bis 6000) mm spindle bore: 155 mm turning dia. in gap: 1250 mm spindle turning speed range: 5 - 1000 U/min thread: 80 Stufen metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: 60 - 1 1/16 inch. Whitworth-thread: 240 - 1/4 TPI bed width: 700 mm spindle cone: Gr. 15 longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm spindle cone MT: 160 face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MK 6 quill stroke: 260 mm total power requirement: 22 (0ption 30) kW weight of the machine ca.: ca. 8500 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available i ...

COLOMBO lathe, H points 800x1500, hydraulic tailstock, displayed.

General: Year of construction 2011 Power 1.0 kW Weight 240 kg

We offer you an asphalt cooker (trailer) from the company Breining. - Price per machine If you have any further questions, please feel free to contact us or visit us Errors and information Errors excepted! No guarantee or warranty. Prior sale and errors excepted. ANB Handel & Service Inh. M. Schönau Halbmondsweg 399885 Ohrdruf

roughness meter, Contour measuring device Manufacturer: Hommel Type: T 8000 Year of construction: 2005 Specification: DIN EN ISO 4287 Ra, Rz, RmaxRSm

Heidenhain ROD 800.0000 - 36000 Id.Nr. 298 466 06 Incremental angle encoders with self-bearing Series: ROD 800 System accuracy ± 1" Mechanically zul. Speed 1000 min–1 Interface: » 1 VSS Scope of supply: 1 piece Item condition: NEW More items - new and used - can be found in our shop! International shipping costs on request!

General- Compound slides with turning/milling spindle as integrated spindle motor, with hydr. locking at turning acceptance HSK-63A DIN 69893 - Y-axis ± 100 mm - B-axis ±110° with pneumatic locking - Tools magazin disc with 1x24 positions - Absolute direct gauging system in the X, Y, Z linear axes - Coolant pump 5 bar; 20l/min - Cooling system for spindle motor, turning/milling spindle, B-axis torque motor - USB interface, Ethernet interface; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTurning diameter500 mmMax. Turning Length750 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWDrive power (40% DC)32 kWSpeed range- 5000 rpmTorque (100% DC)280 NmMax. torque (40% DC)360 NmC-Axis Speed-5000 rp ...

Plate intermediate table MDT 480 C-800; condition outdated; new engines; new tapes; .max. Printing plate size 811x1200mm; Inlet and outlet sensor; height adjustable. Plate conveyor Grafoteam MDT 480 C-800; condition rebuilt; new motor; new belts; max.plate size 811x1200mm; in and outfeed sensor; adjustable in hight.

pile turner Rachner RD 800 P; condition outdated; Format 600x900; Load capacity 800kg; new tilting cylinder; upper cylinder overhauled; pump and tank cleaned; new tilt valve. Pile turner Rachner RD 800 P; condition rebuilt; size 600x900mm; lifting capacity 800kg; new turning cylinder; upper cylinder rebuilt; pump and tank cleaned; new turning valve.

transformer -Type: EE 800 -Primary: 380 V -Secondary: 63 V 6.35 A. -Dimensions: 160/130/H180 mm -Weight: 12.3 kg

Yeong Chin X: 1500 - Y: 600 - Z: 800 mm CNC Longitudinal travel X-axe: 1500 mm Cross travel Y-axe: 600 mm Travel Z-axe: 800 mm Admission in boring head (ISO): ISO-50 Control: Fanuc Weight: 3 ton

Gurutzpe Super BT lathe. Distance between centers: 8.000mm. Swing: 2.000mm. Swing in carriage: 1.680mm. Swing on gap: 2.360mm. Spindle bore: 102mm. Equipped with chuck and steady rest. DRO Fagor. CE protections and european certificate for second hand machines.

Cast iron bed 1305 x 800 x 100 mm - No 1 Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 510 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Cast iron bed 1305 x 800 x 100 mm - No Length: 1305 mm Width: 800 mm Thickness100 mm Height on feet: 530 mm T-slots dimensions: 40 x 25 mm Weight: 500 kg

Emergency power gas turbine from 1977 with few running hours, without generator and controller. 1 available 456 KW x 1,500 1/min Manafacture: Garrett Model No.: ME831-800A Type: Gas turbine Serial Number: P-830005 Power [KW]: 456 Year of construction: 1977 Weight [kg]: 915 Dimensions LxWxH [cm]: 270x120x120

Transformer with concrete shed. Prepared 430 Kvass, house measures: 7x3 m.

Bending tool, die, upper knife, upper tool, upper beam, goat-foot rail -Tool for folding machine -Pointed tool -Dimensions: 45 x 120 mm -Length: 800 mm -Weight: 19 kg

Beumer bar band 1360-680-430 + injection unit 30° 800-680-430 RA1262 Injection unit 30° consisting of a clock band and a triangular band. Scaffolding and cladding are made of profiled steel sheet. The drive is carried out by means of a gear edgear motor and belt drive. Without control and connections to upstream and downstream conveyors Technical data: Manufacturer: Beumer Year built: unknown Condition: good (used) Engine: fully functional Data Triangular Band Type: Injection unit 30° 800-680-430 Angle (injection): 30° Conveyor length (FL): 1360 mm Nominal/outer width (NB): 680 mm Usable width (NUB): 430 mm Wide transport belt: 393 mm Drive drum: dia. 74 mm Deflection roller: 63.5 mm Funding speed: 2.0 m/sec Engine power: 0.55 kW Data clock band: Type: Tape 1360-680-430 Function: Acceleration tape Conveyor length (FL): 800 mm Nominal/outer width (NB): 680 mm Usable width  ...

Ref. -No.: 10164 Manufacturer: DECKEL MAHO Year of construction: 1986 Type of control: CNC Control: CNC 432 Storage location: Halberstadt Country of origin: Deutschland Total connected load: 40 kVA X-Travel: 800 mm Y-Travel: 450 mm Z-Travel: 500 mm Feed force (X, Y, Z): X 800, Y 24000, Z 8000 N Quill Stroke: 100 mm Speed work spindle: 20-4000 RPM Feeds X/Y/Z: 1-3000 m / min Rapid Traverse X/Y/Z: 8 m / min Tool Taper: ISO 40 Space requirements: 3680 x 3780 x 2720 LxWxH (mm) Further information: Additional information: - with controlled rotary table Ø800 (B axis) - simultaneously controlled axes: 3 - axes controlled one after the other: 4

Year of construction: 1995 1 gathering tower AC 8000 S 8 stations gathering machine Sniffer Vibrating delivery Gathering machine in tower design Delivery date: immediately from stock Price on request. We deliver and install worldwide!

Material : CPET, PET, PP, HIPS, OPS, PVC // Forming Area (Vxh): 800x570

chuck diameter, mm 7100 (8000) Max. work piece diameter, mm 8000 Max. work piece height, mm 3200 Max. work piece weight, kg 125000 Chuck speed, rpm 0,22...20,1 Max. ram movement of vertical support, mm 2000 Max. movement of vertical, mm 4275 Support feed range, mm/min 0,0352...285 Support rapid feed, mm/min 2500 Supports possible work angle, deg. -15...+40 Jaws, units 4 Machine overall dimensions, mm 8615 x 17600 x 9800 Machine weight, kg app. 247300

Step claws, clamping devices, clamping claws, deep clamping jaws, clamping pads, clamping tools -Number: different sizes -in a tool cabinet -Dimensions: 800/720/H1050 mm -Weight: 300 kg

Curved bearing (curved track bearing), profile rail -Y3N 215 -Rail length: approx. 840 mm -Rail width: 35 mm -Number: available several times

Temperature controller, temperature sensor, temperature setting, signal converter, temperature converter, temperature limiter, electronic temperature controller display -Manufacturer: Kfm, temperature controller display -Type: 800 710 -Temperature range: 0...100°C -Voltage: 220V / 48-62 Hz -Quantity: 2x display available -Price per piece -Dimension: 125/100/H50 mm -Weight: 0.4 kg/pc.

Platform trolleys, transport trolleys, heavy-duty trolleys, table trolleys, assembly trolleys, industrial trailers, platform trolleys, plate transport trolleys -Manufacturer: wheels Gangl, transport trolley with 2 steerable castors -Platform: 1800/800/H490 mm -Load capacity: max. 1500 kg -Number: 5 transport trolleys available -Price per piece -Total dimensions: 1800/800/H490 mm -Weight: 95 kg/pc.

electronic clamping elements, twist-and-turn clamps -Clamping force: 160 kN -stat. max.: force 30 kN -Clamping stroke: 15 mm -Total stroke: 60 mm -Dimensions: 720/200/H220 mm -Weight: 60 kg

Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, carrier rollers -Diameter roller: 80 mm -Transport roller width: 800 mm -Total length: 830 mm -Sprocket: 1/2 x 11 teeth -Thread: M8 -Number: 41x rolls available -Price: per piece -Weight: 4.1 kg/piece

max. workpiece diameter: 250 mm threading length: 800 mm max. module: 8 min. module: 1 total power requirement: 10 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 3,05x1,75x1,60 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer consists of: Horizon AC-8000 S Gathering tower with 8 stations -Sniffer - Double, miss-blade and jam control - Integrated vibrator with autom. Lowering - Format: max: 318x470mm, min: 148x210mm - Paper weight: 23-210g/sqm - Loading capacity 10cm/station - Capacity: up to 2400 sets/h - Machine dimensions: 165x65x207cm - Weight: 510kg - Electricity: Three-phase 400 volts On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing quote

Clamping table, T-slot table, rotary table, milling machine table, NC rotary table -Manufacturer: MAHO, clamping table: milling machine table from CNC machining center MAHO MH 800C -Table surface: Ø 600 mm -T grooves: groove width 14 mm, groove spacing 64 mm -Dimensions: see photos -Total dimensions: Ø 630 x 555 mm -Weight: 365 kg

The scope of delivery includes: 01x Depth bridge, used Manufacturer: Nedcon Material colour: sendzimir galvanized Truss support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/ piece: approx. 1,983 Kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

2021 MODEL THREE STATION INPAK MACHINE WE WANT TO SELL MACHINE BECAUSE WE NEED BIGGER DIMENION MACHINE , OUR MACHINE IS IN PRODUCTION AND CAN BE SEEN IN PRODUCTION. ITS ONLY 3 YEARS MACHINE LIKE NEW ONE

X-travel: 800mm, y-travel: 450mm, z-travel: 500mm, quill stroke: 80mm, rotational speed: 63-3150/min, length: 4500mm, width: 3800mm, height: 2030mm, weight: 3.8t, operational hours counter: 2538h, including accessories and documentation, was maintained regularly.

Speed: 2000 rpm, headstock adjustment: 450mm, feed: 500mm/min, rapid traverse: 1400mm/min, table dimensions X/Y: 1050mm/627mm, number of slots: 8, swivel: +/-30°, tool holder: ISA40, quill stroke: 125mm, ram stroke: 125mm, ram swivel: 90°. Dimensions X/Y/Z: approx. 2600mm/1800mm/1800mm, weight: approx. 3000kg. Documentation available.

Working width: 800mm, nominal current: 2A.

Product dimensions: 1000-1200x700-1000x700-800mm, connected load: 16.5kW, length: 4165mm, width: 2451mm, height: 3030mm, with documentation and spare parts.

x-travel: 8000 mm y-travel: 2.500 mm workpiece height: 2.360 mm table width: 2.240 mm table length: 10.100 mm weight of the machine ca.: t dimensions of the machine ca.: 20,0 x 8,5 x 5,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Table dimensions: 8000x1100 mm X-axis traverse: 7000 mm (rack pinion) Y-axis traverse: 1200 mm Z-axis traverse: 2000 mm Automatic octagonal head: 1º-1º Spindle taper: ISO 50 DIN 69871-AD Speed ​​range: 6000 rpm (oil cooled) Motor power: 30 kw Feedrates (X,Y,Z): 25 m/min Rapid traverses (X, Y, Z): 1,5 m/seg2 YOM: 2001 - retrofitted in 2015 Equipped with: Control: HEIDENHAIN iTNC 530 digital Electronic hand-wheel: HR 420 Air cooling: through the tool 2 front extension tables: 1000x1200x1000 mm 2 squares: 1000x1200x3500 mm Probe: thermal compensation Machine with high speeds and cutting capacities Very robust head and machine

Table dimensions: 8000x800 mm Max weight on table: 20 Tn X-axis traverse: 6500 mm Y-axis traverse: 1000 mm Z-axis traverse: 1600 mm Automatic head: 2.5º-2.5º Spindle taper: ISO 50 Speed ​​range: 20-3000 rpm Feedrates (X,Y,Z): 2-12.000 mm/min Rapid traverses (X, Y, Z): 15,000 mm/min YOM: 2002 Equipped with: Control: HEIDENHAIN iTNC 530 Electronic hand-wheel: Yes Tool magazine: 40 htas 2 extra front tables 2 squares: 2 meters high Internal coolant supply: 7 bars Electrical cabinet: cooling supply Several cubes Several cones