mitre used for sale

Mitre Cold Circular Saw BERG & SCHMID Type MKS 350 Year of manufacture approx. 1980 Saw range at 90 Round 110 mm Saw range at 90 Rectangle 160 x 90 mm Saw range at 90 Square 95 x 95 mm Saw range at 45 Round 95 mm Saw range at 45 Rectangle 120 x 90 mm Saw range at 45 Square 80 x 80 mm Saw blade diameter max. 350 mm Saw blade speed 28 and 56 rpm. Motor power approx. 1.8 / 2.5 kW pole-switchable Mains connection 380 volt, 50 Hz - Motor with 2 electrically switchable speeds - Infinitely variable mitre quick adjustment up to 45- Material Clamping vice with quick-release eccentric lever - Coolant device with electric coolant pump - Material stop 350 mm- Sawing blade with 335 mm installed - Space requirement L x W x H 1250 x 600 x 1200 mm Weight 240 kg good condition; used

Mitre Cold Circular Saw EISELE Type VMS 300 Masch. No. 4615 Type No. 4110 3M 0002 Year of construction 1995 Sawing range at 90 (round) 100 mm sawing range at 90 (flat) 120 x 80 mm sawing range at 45 (round) 90 mm sawing range at 45 (flat) 80 x 80 mm saw blade diameter 300 mm Saw blade speed 40 / 80 rpm. 2 stages mitre cut +45 to 90 to -30 motor power 1 and 1.2 kW mains connection 400 volts, 50 Hz - coolant device - mounted saw blade approx. 270 mm Space requirement L x W x H 700 x 700 x 1600 mm Weight 212 kg very good condition; used

Depth of cut at 90°: 200 mm; Depth of cut at 45°: 140 mm; Cutting width at 90°: 420 mm; Cutting width at 45°: 295 mm; Miter range horizontal: 45° -90° -25°; Miter range vertically: 60° -90° -30°; Sawblade diameter: 520 mm; rpm: 2800 U/min; Motor: 5 kW; motor brake: yes; suction plant diameter: 100 mm; weight: 490 kg; suitable for: wood, PVC, alu cross-cut and mitre saw with maximum cutting height of 200mm stable grey cast iron construction precise ball bearing guide of the tool slide on hardened and ground steel shafts manual saw feed fast mitre adjustment up to 25° horizontal and 30° vertical readjustable fixed stops at 90° and 45° lower saw blade protection can be connected to extraction system machine mounted on mobile machine base with 1.5 m long roller conveyors left and right left side with scale and stop slide

really well maintained, equipped with simple CNC control. Saw blade diameter 400 mm This section at 90 ° round 130 mm rectangle 240 x 85 mm flat 180 x 70 mm in MITRE at 45 ° profiles Portrait 120 x 55 mm Feed length with double lifting device to 2 cutting speeds 10/20 m / min. Speed infinitely variable 0-1000 mm / min. Drive motor 400 V, 1.7/2,6 kW Weight 1350 kg Dimensions W x D x H 2750 x 1500 x 1900 mm Accessories: Spray cooling device "Mini pos 807", Blade, roller conveyor, manual.

Cutting capacity round / square 90°: 255 mm / 210 x 210 mm 90° flat cutting area: 310 x 210 mm Cutting capacity round / square 45 ° R: 220 mm / 210 x 210 mm Section flat 45 ° r: 220 x 200 mm Cutting capacity round / square 45 ° L: 230 mm / 200 x 200 mm Cutting capacity 45 ° L: flat 230 x 200 mm Cutting capacity round / square 60 ° R: 135 mm / 135 x 135 mm Section flat 60 ° R: 135 x 135 mm Working height: 930 mm Band saw blade dimensions: 2750 x 27 x 0,9 mm Cutting speed: 35 / 70 m / min Coolant pump: 100 W S1 motor power output 100%: 1.5 kW Motor power S6 40%: 2.2 kW Voltage: 400 V Machine dimensions (L x D x H): 2000 x 1250 x 1900 mm Approximate weight: 350 kg Features: -Professional band saw for General workshop use, fitters... -For cutting of hollow profiles and full materials, stainless steel, tool steel,... -Twist-free, heavily dimensioned saw frame mad ...

MITRE Assembly typesetting machine with high frequency Miter cut length 100 mm for the gluing of frame parts with white glue Various machines in stock

automatic double mitre saw OMS SALVARANI INVINCIBILE OK 330 CE standard : Yes n.02 motors . power Hp 3 each one blades diam.mm.330 max. useful cutting length mm.3000 max. useful cutting width 90° mm. 165 max. useful cutting width 45° mm. 115 max. useful cutting heigth mm.115 volt. 380/50 weigth kgs.650

Mitre punch

Gebr. SCHLEICHER mitre punch mechanical foot actuation Table support left + right Weight: approx. 50 kg from location

Double mitre saw Omga for glazing beads Ready for pickup, price EXW The machine is in good condition, operational. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone: 0041 62 966 18 32 Fax 0041 62 966 21 12

Double mitre saw STRIFFLER-STRIMA 2750 Year of construction: 1992 S/N 289 Manufacturer: Striffler GmbH Germany Cutting width 2,200 mm Cutting height at 45° 240 mm 2 saw motors 1.1 kW, 2800RPM / 380 V 50 Hz Saw blade 250mm Rear-cutting design Width adjustment by electromotive Saw feed pneumatic Length adjustment by handwheel Pneumatic clamping device Length 2940 mm Width 1,100 mm Height 1,220 mm Weight approx. 360 kg

Double mitre saw Hoffmann type MS 35 Specifications: Cutting width (mm): 85 Cutting height (mm): 85 Motor (kW): 2 x 2,2 Horizontal clamp: 1 set Material supports: 1 set

Mitre saw Brand: Graule Type: H8 J2 169 saw blade Ø 250mm swivable saw blade 45 °

Mitre saw Brand: Hebö Type: TA 131 Year: 1999 technical data: adjustable +/- 45° 400 V, 50Hz saw blade Ø approx. 400 mm 2 clamping cylinder extended workpiece support left- / right side each 840 mm 2 stops Note: The specifications and descriptions are a copy of the order confirmation at that time. Datas are for information and are not binding.

Double mitre saw Elumatec DG 79 3000 mm with E 255 1 x stationary 1 x mobile Available from the end of November 2023 The machine is in good condition, ready for operation. Subject to changes, errors, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax 0041 62 966 21 12

Hardly used ( year of construction 2021) Metal Band Saw with Swivel Frame from Optimum OPTIsaw S 300DG Specifications Saw blade 2750 x 27 x 0.9 mm Saw blade speed 35 + 70m/min Cutting angle -60 – +45° Cutting range 0° round 255mm Square 190mm rectangle horizontal 190 x 310mm Cutting range -45° round 220 mm Square 190mm rectangle horizontal 135 x 190mm Cutting range -60° round 135mm square 135 mm rectangle horizontal 135 x 135mm Drive power 1.5 KW - 400 Volt Weight 335 kg Dimensions (LxWxH) 1680 x 1600 x 1300 mm Scope of delivery: material stop, bi-metal saw blade, machine base, coolant pump Properties Double mitre up to +45° and -60° Silent operation Heavy-duty cast design High cutting accuracy due to vibration-free operation Ball-bearing saw blade guide Chip brush Automatic shutdown of the saw a ...

The U2PRW mitre and drill is designed for processing slats and furniture fronts made of solid wood or MDF. The machine tool operates in a semi-automatic cycle. During one cycle, the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in a jammed plane or edge of the element. – made in Poland TECHNICAL PARAMETERS: Max. height of the material to be cut: 60 mm Max. width of the material to be cut at an angle of 45° 70 mm Max. material width at 90° 150 mm Max. length of cut material 2200 mm Min. length of cut material at 45° 455 mm main saw diameter 250 or 300 mm scoring diameter 100 mm Max. bottom cutter diameter 35 mm Max. bottom milling depth 15 mm seating diameter of face drills and bottom milling cutter 10 mm Drill head (face drilling): 4 spindles spindle axial spacing 32 ; 32 ; 40 mm Linear spindle system Max. face d ...

I sell a double mitre saw without scoring with continuous COMEC TD2400 + CA. Working width 250 to 2400mm. Max. saw profile 80 x 100mm Angular setting of each head: Radial +50° / - 50° Axial +45°/ - 45° Saw blade diameter fi.350/30mm Motor power 1.85KW + 1.85KW Magazine for elements. Ejection back to operator Condition as good as new. Fully operational and ready to go. Possible to check. Available soon. With CE and complete documentation.

Double mitre saw OMS INVINCIBLE OK Maximum cutting length 3000mm Maximum cutting width 140mm Units adjustable at an angle of 45/-45° Motor power: 2×2.2kw Saws 320mm Pneumatic material clamping Net price

mitre moulding machine with moulding units max workpiece dimensions: 2600 x 550 mm portal machine with 3double units and 2 single units on the side motors: 8 x 1,5/2,2 kW 50Hz/100Hz workpieces are hold with vacuum automatic movement of the table

Specifications: - Manual band sawing machine - Saw blade dimensions 2925 x 27.0 x 0.9 mm - 2 cutting speeds N 36 / 72 m/min - Max. clamping range 355 mm - Mitre adjustable left + right up to 30 ° - Cutting range - 90° round 270 mm - Square 260 mm - Flat 350 x 240 mm - 45° li + right round 200 mm - Drive 400 V / 1.9 kW - Coolant device - Feed – roller table 2000 mm - Weight approx. 550 kg - Space requirement approx. W 1100 x H 2000 x D 1600 mm

Description: Double mitre saw. Blade diameter: 350mm Useful cutting length: 3200mm Approx. Onsite Dimension. (l x w x h): 4,200 x 1,650 x 1,450 mm, weight approx.: 650 kg

Description: • Mitre saw • Motor 1.50 KW-3000 rpm • Saw blade diameter 300 mm • Table dimensions 620 x 180 mm • Swiveling saw blade from -45° up to +45° • Table top dimensions 380 x 270 mm • Maximum cutting height on the table top approx. 40 mm • Dimensions for transport 800 x 600 x 700 mm Approx. Onsite Dimension. (l x w x h): 620 x 640 x 450 mm, weight approx.: 30 kg

Max. Saw blade diameter: 370mm, mitre angle: -45 - +60°, length: 1050mm, width: 1000mm, height: 1850mm, weight: 450kg. Cutting capacity at 0°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 170x90mm. Cutting capacity at -45°: (round) solid material: 100mm, (round) tube: 100mm, (square) tube: 90x90mm, (rectangular) tube: 125x90mm. Cutting capacity at +45°: (round) solid material: 90mm, (round) tube: 90mm, (square) tube: 90x90mm, (rectangular) tube: 90x90mm.

Type USK 1710 Payload 150 kg Measurements (91-171)x60x(59-82 cm) Table size 60x46 cm Weight 15,5 kg

CNC double miter saw make ANTON type ADS-ENMachine -No: 39091, built in 1991For efficient sawing of aluminum and PVC profilesSaw blade diameter: 450 x 30 mmFeed infinitely variableAir consumption: 7 atm 200 l / minBlade speed: 2800 rpm.Cutting length: 260 - 5000 mmCutting area square: 265 x 100 mmCutting area round: 150 mmDrive power: 2 x 2.25 kWExternal dimensions: 6150 x 1200 x 1750 mmWeight: 1460 kgWith:- Control De Man 408- automatic pivoting from 45 ° to 90 °used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Type KAP 255XJL Cutting height 45?-90?: 80 mm Cutting height swing 45?: 40 mm Cutting lenght 90?: 430 mm Cutting lenght tilt 45?: 310 mm Motor power S1 1,8 kW Saw blade speed 4800 rpm HM-saw blade teeth 254x30x3 mm Transport dimensions 850x520x410 mm Weight 20 kg

Double miter saw make ELU type DG 102Machine -No: 23122 built in 1981for efficient sawing of aluminum profilesSaw blade diameter: 420 mmCutting area straight for profiles approx: 100 x 240 mmxa0xa0xa0 at 45 ° approx.: 100 x 180 mmSection length up to: 4500 mmSaw blade speed: 2800 rpm.Saw blade motor: 2800 rpm, 3 kW eachelec. Connection: 380 V, 6 kWDimensions: 1200 x 6000 x 1350 mmWeight approx: 1000 kgWith- compl. elec. and pneumatic. Facility- pneumatic. tensioning device- 2.5 m roller conveyor on movable saw carriage- saw bladesused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

to the composed of angles by means of hot-melt glue to a Miter cut length of 100 mm

Distance sawing max 90° mm: 2800 Diameter saw blade mm: 300 Main motor kW: 3.3 Weight Kg: 500

Graule ZS 200N Cutting and miter circular saws Motor 400 V / 3.0 kW Speed 2800 rpm Cutting length 420 mm (at 90°) Cutting height 200 mm (at 90°) Miter range: horizontal 45°-90°-20° Miter range: vertical 60° -90°-45° Saw blade s. 520 mm Suction nozzle 100 mm Weight 310 kg G&GA-ZS200N-3KW Underframe optional

Max cutting length: 4000 mm Cutting height: 200 mm Cutting width: 130 mm Power: 5,1 kW Weight: 650 kg

Length: 900mm, width: 800mm, height: 920mm, weight: 330kg.

Main functions: Precision cutting of profiles at various angles. Operating pressure: max. 1MPa, air consumption: 28l/cycle, weight: approx. 2150kg.

Swivel range inwards: 90°-45°, saw blade diameter: 500mm, min. cutting length: 400mm at 90° and 45°, max. cutting length: 6000mm, saw blade speed: 2800rpm. Air consumption per cycle with/without spraying: 64l/40l. Documentation available. On-site inspection is possible.

2-spindle cross-cut saw for series production for precise shortening of materials. The machine can be manufactured in different versions depending on the specification and requirements. Specifications: Motor power: 2.2kW / 3kW Material length: 500 - 1500 mm Possibility to tilt the discs: YES Machine manufactured on request

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Machine -No: 25591 Year 1989Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramsmallest Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- Control E 200- Roller conveyorused from an operational resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Aluminum Double Miter Saw Fabr. ELUMATEC Type DG 79Year of construction 1982Saw blade diameter: 380 mmSaw blade hole: 32 mmCutting length: 4500 mmSwivel range R + L: 15 ° 22.5 ° 30 ° 45 °Angle: 0 - 45 °Section range: sh. sectional diagramCompressed air connection: 7 barSaw blade speed: 3800 rpm.smallest cutting length: 500 mmDrive power: 2 x 3000 WWeight approx: 490 kgwithout controlused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make ELUMATEC type DG 104Machine -No: 25725 Year 1990Saw blade diameter: 420 mmSaw blade hole: 30 mmCutting length: 6000 mmSlope range: 45 + 90 °Saw blade speed: 2800 rpm.Section range: sh. diagramkl. Cutting length: 335 mmPower: 2 x 4000 WDimensions: 6050 x 1600 x 1450 mmWeight approx. 1520 kgWith- CNC control E 255used from an operating resolution, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC Double Miter Saw Fabr. ELUMATEC Type DG 104Year of construction 1992Saw blade diameter: 420 mmSaw blade hole: 30 mmMax. Cutting length: 6000 mmminimum cutting length at 90º + 45º: 360 mmPivoting range inwards: 90º - 22,5ºInclination range inside: 90º - 45ºSaw blade speed: 2800 rpm.Section range: sh. diagramPower: 2 x 4.0 kWDimensions approx: 7500 x 1600 x 2200 mmWith- CNC control - screen -- separate control cabinetused in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 3737, make -No: 2748 built in 1978with drilling and milling machine type BFA series 1109, make -No: 301 built in 1978Sägeblattdrm. : 420 mmCutting length: 4500 mmSaw blades tiltable: 90 - 45 °Max. Cutting height: 150 mmDrive power sawing units: 2 x 3 kWDrive power drilling unit: 1.1 kW (2700 rpm)Motor longitudinal adjustment sawing units: 0.75 kWExternal dimensions L x W x H: 7000 x 1100 x 1700 mmfor olive drilling and lock boxWith- Programmable control MTH for length- 2 revolving extraction systems- Drilling unit BFA (for drilling and milling of handle and lock machining)used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best r ...

Double Miter Saw Make EISELE EMMEGI Type VISA -2 TU / 5Fabr. -No: 148402, built in 1988Saw blade diameter: 450 mmSection length min.:240 mmSection length max .: 5000 mmDrive power: 2 x 2.5 kWOutside dimensions approx. 6500 x 1400 x 1600 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw, make ELUMATEC type DG 104Masch. -No: 25647 Year of construction 1989Technical specifications:Saw blade diameter: 420 mmSaw blade bore: 30 mmCutting length: 4000 mmTilt range: 45 + 90 °Saw blade speed: 2800 rpm.Cutting area: sh. diagramsmall Cutting length: 335 mmPower: 2 x 4000 W.Dimensions: 6050 x 1600 x 1450 mmWeight: 1520 kgWith- CNC control E 255used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Double miter saw make RAPID type DGLSeries 6954, machine -No: 4066 built in 1989Technical specifications:Saw blade diameter: 6000 mmCan be swiveled up to: 45 °Section length up to: mmSaw blade speed: 2800 rpm.Unit adjustment: via spindle with handwheelSaw blade drive per unit: 2 x 3.5 kWelectrical connection: 380 VExternal dimensions L x W x H: 7200 x 1500 x 1900 mmWeight approx: 400 kgwithout controlusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

CNC double miter saw make RAPID type DGLYear of construction 1990Technical specifications:Saw blade diameter: 380 mmSection length: 4800 mmcan be swiveled up to: 45 °Saw blade speed: 2800 rpm.max.cutting height: 210 mmDrive power: 2 x 2.2 kW eachWeight approx: 700 kgExternal dimensions approx .: 1250 x 5850 x 1200 mmwith- CNC Control- pneumatic clamping cylinderused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools