mini used for sale

Printing plates firing furnace Eurografica baby; good condition; cleaned and checked. suitable for 4 plates; Max. Plate width 75 cm; new hood shocks; Timer. Plate backing oven Eurografica baby; good condition; cleaned and checked; used for 4 plates, max.plate width 75cm; new lift; Timer.

Type: T-01 Exhibit and demonstration model! - Table length: 1200 mm - Table width: 530 mm - Table height: 900 mm - Length of slide: 1,200 mm - Width of the slide: 315 mm - Height of the slide: 142 mm - Inclination of the milling spindle: 0 to -45° - Useful length of the milling spindle: 125 mm - Spindle speeds: 3500/6000/8000/10000 rpm - Thorn diameter: 30 mm - max tool diameter: 240 mm - max. can-draw tool diameter: 230 mm - Profile milling: 210 - 240 mm - Cone milling: 320 mm - Diameter suction nozzle: 2 x 120 mm electrical connection: - Motor power: 5.0 kW - Voltage: 400 V - Phases: 3 Ph - Current type: AC (AC) - Frequency: 50 Hz Dimensions: - Length: 1200 mm - Width/depth: 1400 mm - Weight: 510 kg Space: - Length: 4,400 mm - Width/depth: 4,420 mm The data refer to the recommended installation area and result from the dimensions of the machine  ...

SCM minimax sc2c Format circular saw Table dimensions 1020 x 325mm Table height 900mm Trimming length 1600mm Inclination of the saw blade 90° - 45° Max saw blade diameter 315mm Motor 400V 50Hz 4kW Suction nozzle diameter 120mm Suction plug. Saw blade protection 60mm Weight 295kg Speed saw blade 4000 rpm G&STÃ?-5504215 Prescribing optional! Drezahl Ritzer 7600 rpm Precresing saw blade diameter 80mm G&STÃ?-5504215VR

Semi-automatic tube filling and sealing machine for PE, laminate and metal tubes, demonstration machine Capicity 10-20 tubes / min. Filling range from 5-250ml Tube sizes from D.13.5 - D.50mm with different format sets Ultrasonic sealing unit

- Standard model - Opening width: 120 cm - Lifting capacity: 600 kg

- Standard model - max. opening: 120 cm - Load capacity: 600 kg

Actuator Pradler gear technology Lifting drive for belt adjustment / turnout Drive is created / built on customer request Stroke length / lifting force / supply voltage / 24 V - 440 V 2AC 3 AC 50/60Hz +DC

Fitting drilling and press-in machine Blum Minipress MSP with attacks L x W x H: 1000 x 800 x 1700 mm Weight approx. 50 kg The machine is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Number of milling spindles: 2 St. fence: 1 ja workpiece: ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 45 to. no. of strokes: 24 Hub/min hole diameter in sheet thickness: max. Ø 27 in 13 mm : 80x80x8 : 60x60x6 mm flat steel: 300x10/200x13 mm : 7 mm engine output: 2.2 kW range L-W-H: 1550x820x1540 mm weight: 760 kg Standard equipment: - Complete knife set for flat steel shears - complete knife set for angle steel shears - complete standard punching equipment - Stamp quick release device for punches up to Ø 27 mm - Rectangular notching device complete with hold-down device - notch - Support table for punching device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

saw blade diameter: 250 mm capacity 90 degrees: round: 85 mm capacity 90 degrees: square: 75 mm capacity 90 degrees: flat: 100x65 mm capacity 45 degrees: round: 80 mm capacity 45 degrees: square: 75 mm capacity 60 degrees: flat: 90x60 mm total power requirement: 0,8 kW weight of the machine ca.: 0,04 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Amperage range maximum: 0 A Amperage range minimum: 0 A aligning for sections of a growing line ideal for wind tower, vessel, pipemills with rail bogie driven Load capacity per section:30 + 30 T Vessel range Minimum:    1500Ø Vessel range Maximum:    6500Ø No of wheels per section:4 Number of matching pieces:2 Length:                  4.500 mm  Width:                   2.200 mm  Height:                  1.000 mm  Weight:                  2885 + 3885 kg 

Specifications: - Cutting length up to approx. 220 mm - Cutting thickness - Steel with 400 N/mm² strength 4 mm - Stainless steel with 600 N/mm² strength 3 mm - Cutting angle 90 ° - Stroke rate up to approx. 35 1/min. - Depth stops left + right - Table support surface 600 x 400 mm - Table height approx. 1000 mm - E – Foot switch - Drive 400 V / 2.2 kW - Space requirement approx. W 800 x H 1200 x D 650 mm - Weight approx. 500 kg

Wiesheu Minimat in-store oven Type: Minimat 3 IS 500 completely made of stainless steel 5 editions 60 x 40 cm digital control Dimensions: Height: 74 cm Width: 76 cm Depth: 70 cm Specifications: 400 V – 7.8 kW -3 N – 50 Hz YOC 06.2006

Amperage range maximum: 270 A Amperage range minimum: 210 A (1) TIG / (2) MIG: 1   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id    5402 MAKE         Fronius TYPE           TransPulse Synergic 2700 YOP              2015 SPECIFICATIONS Rated power   60 %        270 Amp Rater power 100 %          210 Amp Imput     16 A Tension         400 V Number off programs       100 DIMENSIONS Length       625 mm Width         290 mm Height         475 mm

Amperage range maximum: 0 A Amperage range minimum: 0 A Technical data Connection output: up to: 225 kVA Range: up to: 200 mm Working stroke: 0 - 80 mm Power of electrodes: up to: 3000 kp Working table surface: Length: 250 mm Width: 250 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 700 mm Width: 1900 mm Height: 2400 mm Various accessories: Watercooled Déclanchement à deux mains

Wiesheu Minimat in-store oven Type: Minimat 3 IS 500 completely made of stainless steel 5 editions 60 x 40 cm can be driven on castors digital control with base cabinet 6 editions 60 x 40 cm Dimensions: Height: 155 cm Width: 80 cm Depth: 80 cm Specifications: 400 V – 7.8 kW -3 N – 50 Hz YOC 06.2006

Amperage range maximum: 225 A Amperage range minimum: 200 A Out put 60 % = 225 Amp Out 100 % = 200 Amp  

Technical data Bar diameter round up: 3 mm up to: 20 mm possible with equipement Length of bars max.: 3270 mm Voltage 50 Hz 3x: 380 Volt Overall dimensions machine: Length: 5270 mm Width: 1000 mm Height: 1300 mm

Control: MOD. 58 CN Technical data Table length: 900 mm Table width: 400 mm Axial motion: Longitudinal travel (X-axis): 1000 mm Cross travel (z-axis): 500 mm vertical travel (Y-axis): 400 mm Table load max.: 1000 kg Grinding wheel: Diameter: 400 mm Width: 50 mm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 7.5 kW Overall dimensions machine: Length: 3000 mm Various accessories: Magnetic plate: Length: 800 mm Width: 500 mm Wheel trueing attachment Set of flanges Balancing arbor Lamp

Technical data Speeds from: 25´000 rpm Speeds up to: 60´000 rpm Diameter: 50 mm Voltage 50 Hz 3x: 380 Volt Driving motor (motor power): 0.2 kW Machine´s weight about: 5 kg Overall dimensions machine: Length: 250 mm Width: 175 mm Height: 175 mm

Amperage range maximum: 0 A Amperage range minimum: 0 A Table Length:        1.220mm Table Width:         1.220mm Table load on 50 mm: 5.000Kg Table load on 200 mm:4.545Kg Table load on 400 mm:3.500Kg Table load on 600 mm:2.900Kg Table load on 1000 mm:1.850Kg Rotation table:      360000° Length:              2.000 mm  Width:               1.600 mm  Height:              1.800 mm  Weight:              2.000 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Table  Ø:            1.500mm Table load on 50 mm: 5.000Kg Table load on 200 mm:3.000Kg Table load on 400 mm:1.000Kg Table load on 1000 mm:500Kg Rotation table:      0,06 - 1,65 ° Length:              2.300 mm  Width:               1.500 mm  Height:              2.000 mm  Weight:              2.500 kg 

Amperage range maximum: 0 A Amperage range minimum: 0 A Load capacity per section:7.5 + 7.5 = 15 T Vessel range Minimum:    500Ø Vessel range Maximum:    4000Ø Variable rotation:       0,1 - 2000 mm Rpm No of wheels per section:2 Length:                  3.000 mm  Width:                   1.000 mm  Height:                  500 mm  Weight:                  2.000 kg 

Amperage range maximum: 320 A Amperage range minimum: 0 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 3176 MAKE Lincoln ELECTRIC TYPE Power wave 405M + LF 45 YEAR 2000 SPECIFICATIONS  Number / Power source in AMP320 Amp AMP DIMENSIONS Length 600 mm Width 400 mm Height 1300 mm  

Amperage range maximum: 380 A Amperage range minimum: 0 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id 3178 MAKE Castolin Eutectic TYPE MIG Pulse 4003 HD YEAR 2012 SPECIFICATIONS Welding tower / boom height    MIG Pulse mm Number / Power source in  AMP 380 AMP AMP DIMENSIONS Length 1200 mm Width 700 mm Height 1400 mm

Amperage range maximum: 480 A Amperage range minimum: 50 A (1) TIG / (2) MIG: 2   Material thickness (maximum): 0 mm Material thickness (minimum): 0 mm MACH-id   318 MERK  SAF AIR LIQUIDE TYPE  MIG 500 BLX SW YEAR  2000 ? SPECIFICATIES Voeding / power source in AMP  50 - 480 Amp AMP AFMETINGEN Lengte  925 mm Breedte  580 mm Hoogte  1200 mm  

filling capacity: 300 kg max. workpiece height: 500 x 200 x 20 mm container volume: 158 l workpiece weight: 175 kg max. workpiece weight: 15 kg / Stck. revolutions per minute: 22 U/min filling amount: 40-50 % Colour: blau 5015 RAL 0: 624 x 270 mm total power requirement: 1,5 kW weight of the machine ca.: 650 kg Video available on our website.: Electric 400 Volt: New deburring machine for safe and to efficiently deburr workpieces. 6 - angular drum lined with wear-resistant vulcanized rubber 36 mm, roller shutter to protect against the rotating container, stable design, simple service. Control panel with timer, hour counter, main and emergency stop switch and signal lamp. The maximum filling quantity is 40% of the containervolume and corresponds to 300 kg consisting of 175 kg workpieces + 125 kg deburring medium = Hard manganese balls pic 6 or cast iron pentagons pic 7 (50 kg is included ...

: 4,0 mm : 3,0 mm : 30 - 120 Grad blade length: 150 x 150 mm work height max.: 900 mm table:: 1000 x 650 mm engine output: 3,0 kW weight: 850 kg range L-W-H: 1250 x 1000 x 1160 mm Furnishing: - Notching machine with angle adjustment 30° - 120° - Simple and functional Touch Pad control panel Set-up stroke Single stroke continuous stroke - Plexiglas protection for better transparency - hardened knives also for cutting stainless steel - planed table surface to avoid tilting or slipping of the metal sheet - adjustable lift height adjustment - 2x staking stops with movable and interchangeable stop bars - Waste bin - free-moving footswitch - Operation manual BOSCHERT angle adjustment: - the one-piece 30° upper knife is within one tool both with a left and directly connected to a right lower knife - once for each notch over 30° left and once on the right. - the swivel adjustment becom ...

-fully hermethic engine compressor -digital thermostat Cooling capacity: 1,0kW Voltage: 230V/50Hz Pump power: 0.15kW Water tank: 6l

technical details: - TERSA planer knife quick-change system as standard - Material feed with separate motor and two speeds - Aluminium dressing stop (1200 x 160 mm) with round rod guide - Table adjustment by hand with numeric display (1/10 mm accuracy) - Helical toothed steel feed roller electrical data: - Power drive motor: 5 kW - Rated voltage: 400 V - Rated current: 9 A - Mains frequency: 50 Hz Dimensions and weights: - Length: approx. 2,000 mm - Width/depth: approx. 1,100 mm - Weight: approx. 430 kg Dressing: - Total length of the tables: 2,000 mm - Task table length: 1,034 mm - Working height: 900 mm - Chip removal max. dressing: 5 mm - Dressing stop length: 1,200 mm - Dressing stop height: 160 mm Connection suction: - Suction nozzle - Ø: 2 x 120 mm Installation information: - Space requirement length: 2,000 mm - Space requirement width/ depth ...

Builder: WILLIBALD Model: MINISHARK Engine: PERKINS 130 kW (175 HP) Data: L. 8.250 x W. 2.500 mm x H. 3.300 mm Year: 2015 Hourly Production: 35 m³/h Shredding System: 22 HAMMER Rotor Data: D. 700 mm Fuel Tank: 140 L Weight: 8.000 kg

1.7 t net weight, with dozer blade

Servo drive Axor MiniBravo 60 10/20 tested used part

Servo drive Axor Minispeed MS060 8/16 tested used part

PALLETISER PRB, MODEL MINISTRATUS Year of construction: 2006 MINISTRATUS is able to satisfy the request for quick automatic palletizing of cartons on EURO-pallets, the final step of every production process. Completely mechanical construction. The equipment is very clear and simple in its design. Compact-sized machine, with small footprint. TECHNICAL DATA Net weight: Kg 1000 Length: mm 2800 Width: mm 1820 Height: mm 2600 Power: Kw 6 Frequency: 50 Hz Voltage: 24 /400 volts PRODUCTION CHARACTERISTICS Mechanical speed 12 cycles/min Format size min. mm 150 x 80 x 100 h Format size max. mm 600 x 610 x 400 h Automatic palletizer for packaging lines: for Europallets (800 x 1200 and 1000 x 1200 mm). Control panel for machine management, with format size parameter set-up. Easy and fast changeover. A wide range of personalization options available. Balcony construc ...

Used lab homogeniser from Axomatic model MINIMIX 5 Lt. New 2015. Technical specifications supplied for the MINIMIX 5 Lt: Tank: - Type: vertical cylinder with flange - Bottom: cup-shaped bottom welded to the cylinder - Lid: cup-shaped welded to the flange with integrated silicone gasket, liftable - Jacket: with cup-shaped bottom, surrounding the tank - Insulation: on tank, made of mineral wool, surrounded by welded sheets Capacity: - Total: 6 litres - Working: 5 litres - Minimum: 1.5 Litres Materials: - Tank: AISI316 internally polished - Bottom: AISI316 internally polished - Lid: AISI316 internally / externally polished - Jacket insulation: AISI304 polished - Parts in contact: AISI316 internally polished - Frame facings: AISI304 satin-finished "scotch brite" type - Scrapers: TEFLON movable Operating conditions: - Tank: full vacuum / atmospheric pressu ...

Welding fume extraction, soldering extraction, laboratory extraction High vacuum Torch extraction FUMATOR-APPARATEBAU HEINZ WAGNER Type Minivac 250 D series. No. 2902619 Year of construction 2004 Unit air volume flow max. 250 m3/h Minimum air volume flow rate min. 100 m3/h Separation efficiency 99.97 % Welding fume class W3 Motor power approx. 0.75 kW Mains connection 230 volts, 50 Hz - Suction power infinitely adjustable - 2 pieces Suction connections 45 mm - mechanical air filter (used) - mobile underframe with 4 fixed castors, platform roller Space requirement L x W x H 700 x 500 x 600 mm Weight suction 35 kg Weight platform roller 7 kg good condition; used

Edge grinding machine Work table swivel 45° Grinding height 150 mm Table dimensions 1440 x 710 mm 2 speeds for sanding belt 12/24 m/min 37qqrtber Height adjustment 130 mm from the unit

Very small and high sensitive Metal Detector, flexible setting of detector head, suitable for detecting small products and specials applications. - Specifications: stainless steel framework | weight of product: max. 1kg | detecting speed: 0.17-1m/sec | detecting accuracy: FE from ? 0.6mm, SUS from ? 1.8mm | tunnel size WxH: 150x100mm | max. passing size WxH: 110x60mm | power: 220V/0.15kW, 50Hz/60Hz | dimensions and weight: L940xW500xH1198mm, 100/200kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Packaging machine equipped with a vacuum module for premade Doypack pouches, block bottom pouches, flat bottom pouches and other stand-up bag types. Compact construction with horizontal production processes. Batch/date printer and modules for specific pouch properties such as zipper, spout, gusset shape can be optionally integrated at a surcharge. Bag detectors checking the correct placement and complete opening of the e.g. Doypack pouch. The product infeed chute allows immediate pouch filling after the pouch is detected and keeps the sealing area free from contamination at the same time. The vacuuming takes place immediately before the bag is sealed by means of a lance which moves into the bag. The PLC controlled machine is operated via touch screen. Specifications: stainless steel version (SS304) | max. speed of the machine in neutral: 15 cycles/minute | bag width: 100-300mm | bag leng ...

A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Micron B.V. Vrieco Nauta Minimix stand alone lab mixer machine. A miniature stand alone plug-and-play processing plant for the small scale processing of small batches of just a few grams, perfect for the laboratory or R&D projects. It allows to test or produce material a reduced scale. The Nauta Minimix is a gentle conical screw mixer, specially developed for R&D work ...

Haas Minimill HE Machining center - vertical Photos attached Minimill HE

x 406mm Y 305mm Haas control Max spindle speed 6000 rpm Main spindle power 6 kW Tool magazine 10 pcs. SK 40 cone Dimensions 2.0 x 2.0 x 2.5 m Weight approx. 2.2 t