milling head used for sale

Cast milling machine table Length 1435 mm Width 420 mm Thickness 170 mm T-slots numbers 5 T slots Weight approx. 800 kg

Travel X-axis 1100 mm Travel Z-axis 360 mm Travel Y-axis 400 mm Table length: 1600 mm Table width: 360 mm Spindle taper: ISO 50 Main axle speed range: 32 – 1250 rpm. With vertical and chisel head accessories Year of manufacture: 1990 Cooling water system works. High-speed clutch burned out, to be renewed. Advance functions can be controlled manually.

Vertical milling head, milling head, angle milling head CCCP / USSR STANKO Type 1905 Product No: 393 Year of construction 1974 Tool holder: MK4 Hole spacing Machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Drive via carrier, centric in centering diameter - Degree scaling on the flange plate 4x 90 rotatable - Degree scaling on the angle head +/-90 swivel Weight: 65 kg good condition Slot butt head bearing number 58166 and vertical milling head bearing number 58164 of identical STANKO milling machine.; used

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head, milling head, top head -Manufacturer: Kunzmann, top head from milling machine type UFV 600 -Gear: 31 teeth -Dimensions: 505/180 / H195 mm -Weight: 30 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part: from a Stankoimport milling machine -Milling head: with quill -Recording: Exit -Recording: Entrance -completely swiveling -impact head -Equipment -Pitch circle -Dimensions: 1200/800/H300 mm -Weight: 200 kg -Sale only in full

Sensor, write head, read head, read/write head -Manufacturer: Turck Blident, read/write head -Type: TNLR-Q80L400-H1147 -Voltage: 24 VDC -Dimensions: 415/80/H25 mm -Weight: 1.1 kg

Sensor, write head, read head, tactile bore measurement -from: warehouse liquidation -Product group: LF (70/455 kHz) -Dimension: 40 x 33 x 61.5 mm -Connection: M12x1 socket, 5.00 m, PU -Protection class: IP 67 -Weight: 450 g

Universal milling head, milling adapter, milling extension, angled milling head, universal milling angled head, milling angled head -Manufacturer: TOS, universal milling angle head from milling machine TOS FB25-V -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 55 mm -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 780/490 / H430 mm -Weight: 224 kg

Groove butt head for milling machine, milling head, CCCP / USSR STANKO Type 1502 Nr: 200 Year of construction 1974 Stroke size: max. 60 mm Number of strokes: approx. 200 - 500 strokes/min. Tool holder: 12 x 17 mm with clamping plate Hole spacing machine flange plate: 245 x 185 mm Mounting hole: 17 mm Centering diameter on the machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment- As with the normal vertical head, the drive can be swivelled continuously from the machine gear drive via driver, centered in the centering diameter - Degree scaling on the flange plate +/- 45 - This groove butt head is flanged in place of the normal vertical milling head (assembly in place of the vertical milling head, milling head) Weight: 42 kg good condition Groove butt head stock number 58166 and vertical milling head stock number 58164 from identical STANKO milling machine.; used

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: WMW HECKERT, milling head from milling machine FSS 315-V -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 850/650 / H520 mm -Weight: 277 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part of a: WMW HECKERT milling machine -Number: 1 piece angle milling head -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Rezes recording: mm -Pitch circle: mm -Transport dimensions: 750/600/H530 mm -Weight: 296 kg

Universal milling head, milling adapter, milling extension, angle milling head, electronic spindle -Spare part comes: from a machining center BJM type ALBZ-145 -Number: 1 piece angle milling head -Recording output: HSK -Milling head: completely rotatable/pivotable -Transport dimensions: 1080/380/H435 mm -Weight: 246 kg

Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Waldrich -Spare part: comes from a milling machine -Milling head: swiveling -quill stroke: 150 mm -Spindle mount: SK50 -Motor: 11 kW 1470 rpm -Spindle speed: 25 - 560 rpm -Transport dimensions: 1550/600/H460 mm -Weight: 636 kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part comes from a machining center cover type FP3A -Spare part no.: 2271 -Milling head: fully rotatable -Tool holder: hydraulic -Spindle mount: SK40 -Stroke: 80 mm -Transport dimensions: 735/260/H580 mm -Weight: 121 kg

Main spindle with drive motor, universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron UME 600 -Motor: Siemens 380V 3.7/5.25 kW see photo nameplate -Speed: 1500/9000 rpm -Spindle head: SK40 mount -Dimensions: 1550/560/H735 mm -Weight: 555 kg

Universal milling head, milling holder, milling extension, angle milling head, upper support, upper slide, dovetail guide, tool slide, cross table -Manufacturer: Mikron, upper support tool slide from CNC milling machine Mikron WF 51C/155 -Motor: AEG 380V 8 kW 1400/2850 rpm -Dimensions: see photos / techn. drawing -Dimensions: 1700/580/H700 mm -Weight: approx. 525 kg

Universal milling head, milling holder, milling extension, angle milling head - Recording output: SK40 -6x milling spindle speeds: from 1900 to 6000 rpm -Engine AEG type: AM 71 NX 2 -Voltage: 220/380V -Drive: 0.55 kW -Dimensions: 610/230/H325 mm -Weight: 26kg

Universal milling head, milling adapter, milling extension, angle milling head -Spare part from an R&E -Recording output: MK5 -Recording input: gear -completely swiveling -Rezes recording: mm -Pitch circle: mm -Movable stroke: approx. 150 mm -Dimensions: 720/630/H740 mm -Weight: 400 kg

Angle Milling Head, Angle Head, Milling Head, Drill Head WMW, WERKZEUGBAU DOBERSCHAU App. 252 Tool holder: MK2 1 spindle stroke: 35 mm drive plate: Ø 72 mm, 2x drive groove, width: 16 mm flange: Ø 146 / 100 mm bolt circle diameter: Ø 120 mm hole diameter: Ø 13.5 mm accessories for RUHLA milling machine used, tested ! Dimensions: 295 x 145 x 135 mm

Universal milling angle head, milling angle head -Assembly: collet -Admission recess: Ø 160 mm -Hole circle: 174 mm -Milling spindle: 45 ° -completely swiveling -Dimensions: 200/185/H320 mm -Weight: 20 kg

Milling head WMW Tool holder: Ø 25 / 35 x 12 mm Spindle stroke: 80 mm shaft (drive): Ø 14 / 18 mm, 4x wedge profile, wedge width: 5 mm shaft length: 20 mm Flange: Ø 228 / 175 / 145 mm ring groove: Width:15 / 27 mm, Depth: 24 mm Shaft guidance: Ø 60 x 32 mm, Ø 59 x 4 mm, Ø 40 x 10 mm Milling mandrel: Ø 27 mm used, tested ! Dimensions ( without milling mandrel ): 410 x 280 x 230 mm

Description: Technical details: inner cone of the Sk40 milling spindle, speed range 300 to 3000 rpm, drive motor 15 kW, max. milling cutter 120 x 170 mm, milling head was overhauled by Pfauter 3 years ago Approx. Onsite Dimension. (l x w x h): 1,500 x 800 x 500 mm, weight approx.: 800 kg

Milling head, drill head, angle head WMW Tool holder: SK40 with collet chuck size 25 360 ° rotatable in two planes shaft ( Drive , machine side ): SK50 shaft ( drive, milling head side ): Wedge hub profile 8 x 36 x 42 x 8 ( TGL 0-5472 ) flange: Ø 260 mm / 397 x 339 mm hole spacing: 365 / 175 mm 4x Bore: Ø 19 mm used, tested ! Dimensions: 400 x 390 x 600 mm

Universal milling angle head, milling angle head -Recording: MK4 -Take drive: MK5 -Angled head: swiveling -Dimensions: 440/300/H310 mm -Weight: 68 kg

Milling head, horizontal milling head WMW Tool holder: SK40 Tool width: max. 55 - 105 mm diameter counter bearing: Ø 56 mm 360 ° rotatable hollow shaft ( drive ): Ø 48 mm, 2x keyway, groove width: 12 mm drive adapter: SK50 flange: 300 x 245 mm bolt circle diameter: Ø 285 mm 4x bore: Ø 18 mm 4x screw M16 x 2,0 used, tested ! Dimensions: 470 x 300 x 320 mm

Universal milling angle head, milling angle head -Take: SK 50 -Flange holder outside diameter: 380 mm -Mounting hole circle: 320 mm -Admission drive diameter: 60 mm -swiveling -Quill stroke: 65 mm -Dimensions: 450/400/H700 mm -Weight: 170 kg

Cylinder head face milling and grinding machine in good condition. Grinding segment wheel diameter 420 mm Table clamping surface 1600x360 mm Table travel 1800 mm Distance between machine table and machine head 825 mm Extensive range of optional accessories Wet machining has never been carried out with the machine

Milling head PAGUS Outer Ø Thread: 41.8 mm Square 10 x 10 mm used, tested ! Dimensions: 250 x 200 x 400 mm

Milling head, with clamping drive and coupling device WMW, HECKERT FSS400 Tool holder: SK50 360 ° rotatable inner flange diameter: Ø 250 mm outer flange diameter ( inside / outside ): Ø 429 / 585 mm ring groove diameter ( inside / outside ): Ø 480 / 502 mm Groove width: 22 / 36 mm Hookers: 42 mm Clamping drive: ROTO RECORD EDU I80 HDR coupling: EK IH used, tested ! Dimensions: 1000 x 590 x 450 mm

Milling head WMW Tool holder: SK30 Spindle stroke: 85 mm 360 ° rotatable < br />drive flange: Ø 22 mm, 2x driver, width: 20 mm flange: 260 x 205 mm hole spacing: 215 / 140 mm 4x bore: Ø 12,6 mm used, tested ! Dimensions: 500 x 270 x 320 mm

Description: Worm milling head for Köpfer 140 + 135 No. 4003 Type 140 Speed ​​range 800 rpm Approx. Onsite Dimension. (l x w x h): 350 x 200 x 250 mm, weight approx.: 30 kg

inner taper of milling spindel: Sk40 collet diameter: nein turning speed range: 300 bis 3000 U/min drive motor: 15 kW weight of the machine ca.: 0,8 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner taper of milling spindel: ja collet diameter: ja turning speed range: 800 U/min drive motor: kW distance spindle - column: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 Torque: 200 Nm turning speed range: 1800 U/min drive motor: 3,7 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 22 kW tool adaptor: ISO 50 Torque: 1000 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 5,5 kW tool adaptor: ISO 40 Torque: 290 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: max. 44 kW tool adaptor: ISO 50 distance spindle - column: 460 mm Torque: 3180 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min tool adaptor: ISO 40 - 50 spindle taper: DIN 2080 / M16 drive motor: 7,5 PS quill stroke: 65 - 75 mm quill stroke: 65 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: 30 kW tool adaptor: ISO 50 Torque: 1500 Nm Quick tool unclamping device (hidromechanic), on both spindles Tool taper DIN 69871 - Pull stud DIN 69872 B, on both spindles General dimensions as per the attached drawing VXZ-3900-36-DG The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min drive motor: max. 25,7 kW tool adaptor: ISO 50 distance spindle - column: 417 mm Torque: 1370 Nm Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tool adaptor: ISO 40 - 50 turning speed range: 1800 - 4000 U/min drive motor: 5 - 30 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 1800 U/min drive motor: 14,7 kW tool adaptor: ISO 50 Torque: 780 Nm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Milling block; milling block; milling heads; milling machine; external size 125 mm; height 180 mm; shaft hole 40 mm; v.v. interchangeable blades

throat: 276 mm tool adaptor: 40 ISO power requirement: 7,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning speed range: 3000 U/min tool adaptor: ISO 50 drive motor: 22 kW distance spindle - column: 358 mm Tool bore: DIN 69871 Technical specifications Automatic clamping of the tool, driven by a hydro-mechanical system at 80 bar. Spindles and gears are made of case-hardened and tempered chrome-nickel. Spiral bevel gears, Klingelnberg system with ground tooth flank. High-precision bearings. Standard DIN-2080 / 69871 taper tool – Drawbar DIN-69872. Consult for others. Wide range of performances and applications. Blowing of taper for cleaning. Cooling of bearings of the spindle (4000 rpm) External cooling of tool or internal AD-type cooling, with rotary joint. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.