milling drill used for sale

Drilling machine Reichenbacher Drilling machine with 3 drilling units from above Transmission width maximum 1400 mm 3 motors adjustable to the full width Motor strength 1.5 kW each Motors can be switched individually Lifting / lowering of the drill bar pneumatically foot-operated Maximum pass-through height 400 mm 2 pneumatic workpiece holders adjustable on machine table Drill distance minimum 180 mm Drill distance maximum 1200 mm dimensions 2600 mm x 2100 mm x H 1700 mm

specifications Number of drills: 23 Drilling distance mm: 32 Maximum drilling depth mm: 55 Dimensions of the work table mm: 960x3000 Power KW: 1.5 Weight kg: 320 02 Attacks with stop profile

GE 1085 HP (809 kW) High-Torque, series wound, DC drilling motor Horizontal, drip-proof fully guarded, blower ventilated

Boring diameter capacity: 100 mm Drilling radius: 3000 mm Work-piece height range: 440-2100 mm Spindle taper: MT 6 Spindle turning speed range: 18-1800 rpm Quill stroke: 400 mm Surface area: 3160x1500 mm Boring feed range: 0,0375 - 2 mmm/min Distance spindle - column: -Min.: 400 mm -Max.: 2850 mm Total power requirement: 13 kW Machinery dimensions: 4390x1550x4130 mm Machinery weight: 13200 kg

Hole drill machine for wood Fabr. CASATI MACCHINE Type HF / SuperVertical boring head / boring bar with: 13 drillsDrilling direction: from aboveDrilling depth: 60 mmVertical stroke: 150 mmDrilling beam pivotable forwards by: 90 °Perimeter spacing center-center hole: 32 mmMotor Power Drilling Motor Vertical: 2 HPHorizontal drill head with: 3 drillsHorizontal stroke: 130 mmDrilling direction: from back to front, fixedHole pitch: 32 mmWorktable size: 2000 x 450 mmDrill table adjustment in y-direction: 70 mmMotor Power Drilling Motor Horizontal: 0.25 kWCompressed air: 6-8 barExternal dimensions: 2150 x 1380 x 1780 mmWeight approx: 160 kgWith:- pneumatic material tension (clamping stroke 26 mm)used, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be ...

specifications: - Drilling capacity approx. 32mm - Drilling spindle holder MK 3 - Projection 70 mm - Hub approx. 175mm - 8 speeds approx. 10 - 420 rpm - Drive 42 V / 960 watts - Magnetic base 100 x 220 mm - Magnetic base left + right swivel drill carrier - Space required approx. W 300 x H 700 x D 460 mm - Weight approx. 49 kg - Safety transformer – separating transformer make FEIN , type ESB 1000 - Primary current 220 V - Secondary current 42 V - Space required approx. W 300 x H 350 x D 350 mm - Weight 27 Kg

Fitting drilling machine Grass BBM-R with substructure with stop L x W x H: 2.5 x 1.0 x 1.8 m Weight approx. 350 kg Year of construction 1992 The machine is in very good condition, ready for operation, Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12

Code 61078 Description Radial drilling machine Make BERGONZI Modell F 32 / 1000 Serial No. F 00 – 592 Year 1991 ( as NEW ) Capacity in Steel 60 35 mm Capacity in Cast Iron 26 45 mm Spindle taper MC 4 Spindle radius ( max.) 1100 mm Min/max height spindle / top of base plat 330 / 1030 mm Arm traverse 500 mm Spindle traverse 220 mm Number of speeds 12 steps Speed range 60 – 1300 rpm Feed range 0,06 – 0,12 – 0,22 mm/rev. Working surface base plate 1070 x 515 mm Base plate 1600 x 600 mm Motor 2,5 kW – 380 Volts Total power 3 kW Dimension 1600 x 600 x 1950 (2400) mm (L x W x H) Weight of machine 1300 kg Accessoiries coolant Box: 450 x 550 x 500 mm Condition Machine is in new condition

Code 71112 Description Radial drilling machine Make SORALUCE Modell TRO - 1250 Serial No. 2754 10406 Year 1975 Capacity in Steel 60 40 mm Capacity in Cast Iron 50 mm Thread cutting in Steel 60 M 30 Thread cutting in Cast Iron M 40 Spindle taper 5 MC Spindle radius: max / min 1400 / 450 mm Spindle traverse 950 mm Min / Max height spindle / top of base plate 300 – 1300 mm Arm traverse 700 mm Quill stroke 300 mm Number of speeds 12 Spindle speed range 25 – 1440 rpm Number of spindle feeds 6 Spindle feed range 0,08 – 0,99 mm/rev Baseplate size 1900 x 750 mm Clampsurface base plate 1200 x 650 mm Main motor 3,0 kW - 380 Volts Dimension of machine 2000 x 750 x 2150 ( max.2650 ) mm ( L x W x H ) Weight 2500 kg Accessoiries Box 600 x 450 x 400 mm Coolant elect ...

Code 71130 Description Radialbohrmaschine Make BREDA Modell R 55 x 1600 Serial No. 224 Year 1990 Capacity in Steel 60 55 mm Capacity in Cast Iron 70 mm Thread cutting in Steel 60 M 50 Thread cutting in Cast Iron M 65 Spindle taper 5 MC Spindle radius: max / min 1785 / 495 mm Spindle traverse 1290 mm Min / Max height spindle / top of base plate 505 - 1670 mm Arm traverse 855 mm Quill stroke 310 mm Number of speeds 12 Spindle speed range 30 - 1200 rpm Number of spindle feeds 8 Spindle feed range 0,06 – 1,0 mm/rev Baseplate size 2505 x 1000 mm Clampsurface base plate 1700 x 1000 mm Main motor 4,4 kW - 380 Volts Dimension of machine 2570 x 1000 x 2740 (3275) mm ( L x W x H ) Weight 4070 kg Accessoiries Box 1000 x 700 x 500 mm Coolant Hydraulic clamping  ...

Code 81221 Description Position Controlled Fast Radial Drilling machine Make DONAU Model DR 32 NC Serial No. 7107 Year 1984 Control Heidenhain TNC 145 Drilling cap. in St. 60 in full 32 mm Drilling cap. in Castiron GG 22 in full 45 mm Thread cutting in St. 60 M 26 Thread cutting in Castiron GG 22 M 36 Table 1120 x 800 mm X – Axis 800 mm Y – Axis 630 mm Z – Axis ( Quill ) 170 mm Max. distance Column-Spindel 750 mm Vertical movement Spindelhead 400 mm Spindle taper MC 4 Spindle speeds 45 – 2240 rpm Quill movement 170 mm Rapide feed 8000 mm/min Feeds 4000 mm/min Motor 2,2 / 4,0 kW 380 Volts Dimension 5,0 x 4,0 x 2,7 meters (L x W x H) Weight 3000 kg Accessoiries Position controlled in X – Y – Z ( Quill ) Coolant Machine can also be used without control Condition Machine is in good  ...

Code 7418 Description 5 Spindle drilling machine Make Webo Modell B – 20 S/N Year 1975 Table 1740 x 360 mm Distance from centre of spindle to column 250 mm Spindle taper 2 MC Spindle stroke 190 mm Speeds 125 – 2000 rpm Motor 1,1 / 0,9 kW Volts 380 Volts Machine is in good condition.

Code 111258 Description Rapid Radial Drilling machine Make DONAU Model DR – 24 Serial No. 2300 – 3 Year 1984 Drilling cap. in St. 60 in full 28 mm Drilling cap. in Cast Iron 35 mm Tapping cap. in St. 60 M 20 Tapping cap. In Cast Iron M 30 Spindle taper 3 MK Spindle radius max / min. 1000 / 400 mm Min/max height spindle / top of table 80 / 650 mm Arm traverse 450 mm Spindle traverse 175 mm Number of speeds 18 steps Speed range 45 – 2240 rpm Number of feeds 4 Feed range 0,075 – 0,15 – 0,3 – 0,45 mm/rev. Working surface table 1200 x 500 mm Motor 1,1 / 1,6 kW – 380 Volts Dimension W x D x H 1200 x 1600 x 1910 mm Weight 1400 kg Accessoiries screw cutting Condition Machine is in normal condition

Code 111263 Description Radial drilling machine Make CSEPEL Model RFH 100 / 3000 Serial No. 73089 Year of make 1975 Drilling Cap. in St. 60 / cast iron 100 / 120 mm Spindle taper 6 MK Spindle radius 3500 mm Min/max height spindle / top of base plate 440 – 2100 mm Arm traverse 1260 mm Spindle traverse 400 mm Number of speeds 21 steps Speed range 18 – 1800 rpm Feed range 18 0,0375 – 2,0 mm/rev. Working surface bed plate 3160 x 1550 mm Motor 15 kW – 380 Volts Total power 20 kVA Dimension 4390 x 1550 x 4130 mm (L x W x H) Weight of machine 14.000 kg Accessoiries Box 1000 x 1000 x 500 mm Automatic Clamping Cooling Condition Machine is in good condition

Code 171314 Description Controlled rapide radialdrilling machine Make DONAU Model DANUMERIC 340 Serial No. 6110 – 3 Year 1995 Control Donau Drilling cap. in St. 60 in full 40 mm Drilling cap. in Castiron GG 22 in full 50 mm Thread cutting in St. 60 M 36 Thread cutting in Castiron GG 22 M 45 Spindle taper ISO 40 Spindle speeds stepless 15 - 2800 rpm Quill movement 200 mm Feeds stepless 5 - 2000 mm/min Min/max radius of spindle 540 / 1590 mm Working surface table 1800 x 600 mm Min/max height spindlenose / top of table 85 / 695 mm Motor 5,5 kW 400 V Dimension 1800 x 2500 x 2300 (2700) mm (L x W x H) Weight 2900 kg Accessoiries Position controlled in X – Y – Z and spindle Coolant Machine can also be used without control Condition Machine is in very good condition

Drilling capacity in steel (diameter): 80 mm Thread cutting in steel: M 80 x 4 mm Projection: approx. 500/2500 mm kl./gr. Distance between contact surface and drill pinole: 650/2300 mm Pinole stroke: 500 mm Table clamping surface: 1250 x 2800 mm Speeds: 9 - 1800 rpm Feeds: approx. 2 - 1250 mm Spindle drive: 7.5 kW Weight: 12000 kg Space requirement: 4000 x 1280 x 4100 mm

The Peddinghaus FDB 600 plate processor from the Peddimat product range is suitable for automated drilling and oxy-fuel flame cutting of flat steel and steel sheets in steel construction. CNC control SIEMENS SINUMERIC drill diameter: min ø 8, max. ø 40 mm, inner coolant drilling system Number of drilling agregates:3 pcs. Cutting system: Autogen burning equipment total power requirement: 30 kW max. workpiece height: 600 x 50 x 6000 mm Min. material size: 80 x 8 mm sheet thickness - min.:6 mm sheet thickness - max.:50 mm dimensions of the machine ca.:2,4 x 2,4 x 2,8 m Lead roller conveyor: 6 m Outside roller conveyor: 1 m weight of the machine ca.: 6,5 t

Code 71095 Description Pillar drill Make WEBO Modell Gradua 50 Serial No. 053 12 5 Year Table ( turnable ) 620 x 600 mm Base 620 x 600 mm Drilling capacity ( Steel 60 ) 60 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1250 mm Spindle speeds 8 steps 56 – 1250 rpm Spindle feeds 8 steps 0,06 – 0,84 mm/rpm Weight 1000 kg Motor 4,0 / 3,3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Optie 4 spindle drillinghead ( Price € 1.000,- ) Condition Machine is in good condition

Code 5284 UMSCHREIBUNG CNC Bohrmaschine Fabrikat Okuma Typ DCN - 4 Maschine Nr. 55020239 Steuerung OSP - 330 Diameter Aufspantisch (4x) Ø 400 mm Einbauhöhe Tisch-Spindel 400 – 200 mm Spindel Hub 200 mm Schnellgang vertikal 12.000 mm/min. Vorschübe 5 – 1200 mm/min. Spindeldiameter 45 mm Spindelaufnahme MK 3 Anzahl Spindelstufen 8 Stufen Geschwindigkeiten 125 – 3150 UpM Anzahl Werkzeugaufnahmen 10 St. Motor 1,5 kW 380 Volts Maschinemasse ( L x Br. ) 1540 x 1750 mm Höhe 2100 mm Gewicht 2000 kg Zustand normale Zustand

Code 99901 Description Pillar drill Make CABER Modell 58 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 40 mm Spindle quill 200 mm Spindle taper 4 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 90 - 1550 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Code 99902 Description Pillar drill Make CABER Modell 59 R Serial No. Year New Table ( turnable ) 400 x 600 mm Base 540 x 640 mm Drilling capacity ( Steel 60 ) 50 mm Spindle quill 200 mm Spindle taper 5 MC Gap 400 mm Max. distance spindle – table 800 mm Max. distance spindle – base 1180 mm Spindle speeds 9 steps 65 - 1150 rpm Spindle feeds 4 steps 0,06 – 0,30 mm/rev Weight 500 kg Motor 3 kW – 380 Volt Accessoiries automatic spindle feeds Coolant Condition Unused

Drill grinding machine: Make: Michael Deckel Modell: SO S/N: 22822

LAUTENSCHLÄGER pneumatic hold-down, pressure device, steaching rulers ---------- Technical data ---------- Number of spindles: 8 pieces ; TOP! Workshop tested & ready for immediate use

bore capacity in steel (diameter): 75 mm arm length: 1700 mm workpiece height max.: 370 - 1700 mm total power requirement: 12 kW weight of the machine ca.: 7000 kg dimensions of the machine ca.: m C S E P E L (Hungary) Radial Drill Model RFh 75/2000 Year 1977 Serial No. 61158 _______________________________________________________ Drilling capacity, Steel / Cast Iron, max. 75 / 90 mm Thread cutting Steel / Cast Iron M 60 / 70 Distance between column and spindle centre, max. 1,700 mm Spindle taper ( Morse Cone) MK 5 Vertical stroke of radial arm 380 mm 21 Spindle speeds 19 – 1.900 rpm Base plate 1.100 x 2.300 mm Mounting height, min./max. (base plate) 370 / 1,700 mm Swivelling radius +/- 180 ° Vertical adjustment of radial a ...

spindle diameter: 125 mm x-travel: 710 mm y-travel: 400 mm z-travel: 200 mm table-size: 1000x630 mm turning speeds: 0-2240 U/min power capacity: 5,5 kW total power requirement: kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3,0x2,5x2,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Column drilling machine ALZMETALL type AB 3 ESV Masch. No. 15967 Year of construction 1977 Drilling capacity 32 mm Spindle holder MK 3 - short quill projection 290 mm Pinol stroke 160 mm Table size 545 mm Column diameter 220 mm Spindle speed 55 - 1450 rpm infinitely variable Motor power 1 / 1.6 kW Mains connection 380 Volt, 50 Hz. - Spindle speed via 2 gear stages, 2 motor speeds and infinitely variable via variator gearboxes - Countershaft stage for high torque at low speeds - MK adapter from MK3 to MK4 - automatic feed 0.1 - 0.2 - 0.3 mm/rev - rotatable drilling table - Table height adjustment via hand crank - Machine foot with machined workpiece contact surface - Lighting for the work area Space requirement L x W x H 1150 x 650 x 2000 mm Weight 850 kg good condition; used

Column drilling machine Manufacturer Alzmetall Type AC25/AS Year of construction 1995 comes from a disabled workshop, was never used Main drive 1,1kW 1,000rpm Speed range main spindle two stages 75 - 5,800 rpm Feed drive automatic infinitely variable Feed speed 1 - 3.500mm/min Rapid traverse 3.5 m/min Tool holder MK3 Spidelkopf D 43mm Quill stroke 120mm Projection 295mm Column diameter 120mm Table clamping surface 390 x 420mm Number of T-slots x width x spacing 4 x 14 x 100 Table stroke 665mm Distance spindle-table max 665mm Distance spindle to bearing base plate 1020mm Base plate 765 x 475mm Machine height 1905mm, weight 380kg Coolant device, operating instructions incl. electrical wiring diagram Machine is in top condition.

bore capacity in steel (diameter): 12 mm throat: 220 mm bore stroke: 60 mm thread capacity: 6 M column diameter: 70 mm bore spindle turning speed range: 120-6000 U/min table-size: 300x250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 130 mm x-travel: 3000 mm y-travel: 1600 mm z-travel: 1250 mm Control: Heidenhain type: TNC 426 table surface area: 2000x1600 mm Table load: 12500 kg Rotary table: 360 ° spindle turning speed range: 12-3000 U/min Feed: 1-9999 mm/min Rapid movement: 10000 mm/min total power requirement: 80 KVA weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore depth: 2000 mm table load: 2 t turning speeds: 125-1180 U/min Boring power: 380 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed  ...

Drill stand Manufacturer Neuhauser Type Connector 12S1 Year of construction 1999 Table size approx. 1 m x 0.50 m Total height approx. 1.80 m Holder approx. 42-43 mm The drill is not one of them Arm can be swivelled on both sides Item location: 58730 Fröndenberg/Ruhr The machine can be visited and tried out. A forklift/crane for loading is available. It is possible to expertly examine the items for sale on site. Specific questions should be clarified in advance. The information, such as technical data, dimensions, year of construction, condition are non-binding and have been shown to the best of our knowledge and belief. Errors are therefore reserved. The warranty / guarantee is excluded. The goods are sold ex location / warehouse, with the transfer of risk to the buyer there, this also applies to a shipment on our part, which we have carried out on your behalf. ...

core drilling diameter max.: 6 mm bore depth: 350 mm swing diameter: mm total power requirement: 15 kW weight of the machine ca.: 3500 kg dimensions of the machine ca.: 5000 x 1200 x 2200 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 10 mm throat: 0 mm bore stroke: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Bore diameter: variabel mm Number of heads horizontal: 3 St. Number of heads vertical: 4 St. Dimensions (length / width): 4800 x 1600 x 2400 mm weight: 1500 kg Götzinger Power Drill Type BF 297 With the Götzinger PowerDrill you can, depending on the type and design: Griffoliven drill on the loose frame part or for finished wings, with multi-spindle drilling head, quick-change, also for milling of the lock case for WK 2 or intermediate gear Ecklager drill on loose frame part, with Mehrspindelbohrkopf, quick-change, corner-oriented over stop or custom made (tilt window) Drill vertically from above for fitting, pre-drill for clip on loose frame part Milling vertically from above for pushers, profile cylinders, 3-D hinges Horizontal drilling with 2 drilling units, different drilling diameters, Dowel drill front and long side, plywood / fighter, sprouts, Corner connection, front door etc. M ...

Underfloor drilling unit suitable for IMA - incompatible with a Weeke plug

Adaptation unit with drill chuck for verticale drillings with 1 spindle Price per unit 2 Units available suitable for IMA - incompatible with a Weeke plug

Verticale drilling unit, 3 spindles suitable for IMA - incompatible with a Weeke plug

Drilling machine Brand: Flott Type: TB 10 Year: 1985 Drilling depth 23 mm Motor power 0,52 kW 380 volt 50 Hz 1,6 ampere Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Drilling machine Brand: Flott Type: 6STW Technical data: Drill chuck holder: B12 Drill chuck stroke: 40mm Distance from column to drilling area: 180mm Thickness of the column: 50mm Worktop: 180x260mm Motor: 0.9 kW Speed: 1250-8000 rpm Weight: approx. 20kg Note: The specifications and descriptions are a copy of the order confirmation at that time. Data are for information and are not binding.

Drilling capacity in St 60: 40 mm threading in St 60: M 24 threading in GG 20: M 30 Short spindle: MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514x360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle - machine table min./max.: 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: 7 TFT - LCD display with touch function: manual input of spindle speed Setpoint, speed display actual value, integrated drilling depth display with touch Zero point transfer, virtual drilling depth scale in the display, machine Status displays and warnings in the display, service information, selectable User language: DE / EN / FR / ES / IT / NL / RU Pos. 37.5 Technology computer in the disp ...

: 18 mm : M 12 : M 14 : MK 2 : 225-4.300 U/min. spindle stroke: 80 mm throat: 190 mm column diameter: 65 mm : 300x240 mm : 2 x 12 x 80 mm : 75/357 mm : 300x240 mm : 2 x 12 x 80 mm : 437/437 mm feed: von Hand : Handkurbel total power requirement: 0,37/0,55 kW Machine height: 840 mm weight: 110 kg Standard equipment: - Main switch with motor protection switch lockable - Reversing switch for clockwise and anti-clockwise rotation - Speed adjustment stepless - Protection IP 54 - Mushroom pushbutton (latching) for EMERGENCY STOP - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 40 mm : M 24 : M 30 : MK 3 bore stroke: 120 mm throat: 293 mm column diameter: 115 mm : 514x360 mm : 2 x 14 x 224 mm : 117/701 mm feed: 0,10 + 0,20 mm/U spindle turning speed range: 160-2.250 UpM total power requirement: 1,45/1,9 kW height of the machine: 1840 mm weight of the machine ca.: 285 kg Standard equipment: - Mushroom pushbutton (latching) for EMERGENCY STOP - Reversing switch for right-left rotation - Motor protection switch - Speed adjustment stepless - Speed display digital - Feed overload protection - Protection IP 54 - Connector (fully assembled, cable length 2 m) - Spindle protection with electrical protection The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC,5 Axis JOBS,Linx Compact + Heidenhain TNC 530 HSCI Year of construction: 2013 X-2000 Speed up to 60m/min , Force (N) 9000 Acceleration 4,5 m/sec2 Y-3000 Speed up to 60m/min , Force (N) 9000 Acceleration 6.0 m/sec2 Z-1250 Speed up to 60m/min , Force (N) 9000 acceleration 7,2 m/sec2 C - +/- 200 straight , torque 1200Nm ,max. torque with clamped axle 5000 Nm A - -120/+95 Torque 1200Nm ,Maximum torque with clamped axis 5000NM Speed: 15,000 rpm Cone according to HSK-A-100 Weight : 70000 kg Tool magazine type chain 32 tool positions, Max tool weight 15kg for more info, please call or write e-mail. Machine is immediately available and if you are seriously interested, you can inspect it under power An invoice with VAT will be issued

Audax Mk3

throat: - mm tool adaptor: - power requirement: - kW : 23 mm spindle distance: max. 400 mm : 1200 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 63 mm arm length: 2000 mm workpiece height max.: mm threading:: 48 mm column diameter: 450 mm bore head horizontal movement: 1550 mm drilling head vertical adjustable: 800 mm spindle stroke: 400 mm transmission ratio: 16 Distance Pinole - Ground Plate: 1600 mm turning speed range: 25-1600 U/min feed range: 0,04 - 3,2 mm/U tool taper: MK 5 total power requirement: 5,5 kW weight of the machine ca.: 7 t dimensions of the machine ca.: 3080 x 1250 x 3290 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head  ...

bore capacity in steel (diameter): 100 mm arm length: 3150 mm workpiece height max.: mm threading:: 63 mm column diameter: 700 mm bore head horizontal movement: 2580 mm drilling head vertical adjustable: 1250 mm spindle stroke: 500 mm transmission ratio: 16 Distance Pinole - Ground Plate: 2500 mm turning speed range: 8-1000 U/min feed range: 0,06 - 3,2 mm/U tool taper: MK 6 total power requirement: 13 kW weight of the machine ca.: 20 t dimensions of the machine ca.: 4780 x 1630 x 4600 m new radial drilling machine for solid drilling, boring, reaming, Thread cutting, trimming and lowering. machine with high drilling efficiency and coordinated speed graduation in stable cast construction with electro-magnetic clutch. Drilling depth setting, A tapping with automatic Direction of phase inverter circuit, Feed-overload clutch, hydr. Speed & feed circuit, hydr.-mechanical Pillar & Drilling head ...