We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,043 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...
Qty. 1 Second-hand paper mill Mfc.: Valmet , METSO, Voith, Honeywell, Siemens, Ahlström Sulzer, Clark & Vicario, Andritz, Alfa Laval, GL & V Hedemora, Beloit, Tampella, Built: 1971 Rebuild: 1990 & 2004 Product: Uncoated magazine paper Production capacity: 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Headbox Mfc.: Valmet Type: OptiFlo 2 with dilution profiling (2004) Wire section Mfc.: Valmet Type: OptiFormer LB (loadable blades) (2004) Press section Mfc.: Valmet Type: SymPress B with 4th press (1990/2004) – shoe press in 3rd nip (2004) Drying section Mfc.: Valmet Type: SymDry (1990) – 4 single tier drying groups 2 double tier drying groups – ropeless tail threading (1990/2004) Max designed structural speed of parts rebu ...
front roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) Unused
rear roller 600 x 1500 for mixing mill Buzuluk 14240 (KG40) unused
used
Robust fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives, auxiliary drives, control cabinet and hydraulic unit for splitting. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
used
Drive: 1.1 KW weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills available.
used
Fine rolling mill with 800 mm roll width and 800 mm roll diameter, incl. main drives and auxiliary drives, split adjustment manually. In regularly maintained condition, rollers without riefen. Available for an extra charge: Matching dust filter from Hellmich.
used
Drive: 1.1 KW Weight: 70 kg Dimensions: L 650 mm x W 500 mm x H 1700 mm -> fast-running fan mill. 2 identical Mills stock.
used
Used mill Alpine 500.
used
Skjold stone mill type H-950/I Nr. 976918, 15 kw up to 1500 rpm, stone diameter 950 mm, technically fully repaired and repainted.
used
Europemill stone mill 950 H, 15 kw at 1000 rpm, v-belt pulley diameter 190-5 x 17, flat belt pulley diameter 800, n = 237 rpm, cleaned. Used condition.
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Platform The platform has a universal adapter and contains the necessary electrical and mechanical components for all function modules. This gives you the opportunity to gradually purchase additional modules later and connect them without any problems. The Function Modules The modules contain all process engineering functional components for the respective picoline® variant such as classifier head, housing parts, grinding tools, motor adapters etc ...
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Classifier jet mill Hosokawa Alpine 630 TFG specifically designed for toner grinding, can be used together with the Alpine 250 TTSP air classifier to produce the perfect product. Design: non PSR Material of construction - product contacting parts: mild steel - none product contacting parts: mild steel Wear protection: without Scope: 630 TFG with 18,5kW motor, process gas distributor, rotary valve, filter, rotary valve, blower, control cabinet
new
VESPA 30/60/18.5 VGA Cutting mill for plastics 18.5 KW, 200-300 kg/h. Insertion opening mm: 620×400 Rotor diameter mm: 300 Throughput kg/h: 200-300 Rotor blade quantity/mm: 6 x 300 Stator knife quantity/mm: 4 x 300 Engine KW: 18,5 Dimensions mm: 1210×1000×1925 Weight kg: 1500 options: Material conveying blower 4.0 kW and Big Bag filling station. Soundproofing can also be ordered at an additional cost. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with pre ...
new
VESPA 45/80/37 kWt VGA Cutting mill for plastics 37 KW, 400-700 kg. Model VESPA 45/80/37 kWt VGA Throughput Kg/h: 400-700 Rotor diameter мм: 450 Rotor knife quantity/dimensions piece x mm: 6×400 Stator Knife Quantity/Dimensions Piece x mm: 4×400 Engine kW: 37 Weight Kg: 2300 VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self-aligning roller bearing, which is arranged in the bearing housing outside the cutting chamber. – Easy access to the knives. Knife made of high-quality tool steel with precision machining and surface finish – Good accessibility for cleaning and maintenance – Electrical equipment with SCHNEIDER ELEC ...
new
VESPA 35/50/15 VGA Cutting mill for plastics 15 KW, 150-250 kg/h. Insertion opening mm: 520×380 Rotor diameter mm: 350 Throughput kg/h: 150-250 Rotor blade quantity/mm: 6 x 250 Stator knife quantity/mm: 4 x 250 Motor KW: 15,0 Dimensions mm: 1180x880x1970 Weight kg: 1150 options: With material conveying blower 4.0 kW and big bag filling station. Soundproofing can also be ordered at an additional cost. Information on throughput quantities is indicative and depends on the type of material, shape, temperature, feed method, rotor configuration, blade sharpness, sieve size, etc. VESPA Granulators for Plastics – Soundproof insertion opening for minimal noise level and easy feeding with multiple alternative feed options – Horizontally or diagonally separated housing with robust welded steel construction – The cutting rotor rotates in an extremely robust self ...
used
-Blower hammer mill with 45 kW -Rotor should be prepared
used
--> Grinding blades in the opposite direction. Suitable--> mill for the processing of spices. 2 drives: 15 KW + 7.5 KW.
Qty. 1 Second-hand paper mill for production of SC-A paper (Super Calendered) Mfc.: Valmet Built: 1971 Rebuild 1990 and 2004 Product: uncoated magazine paper Production capacity 290 000 tonnes Basic weight range: 44 – 57 g/m2 Width: 8.35 m Speed: 1500 m/min 3 Super calanders 3 Winders Raw materials: groundwood pulp, thermomechanical pulp, chemical pulp and fillers Paper machine basic information Headbox Valmet OptiFlo 2 with dilution profiling (2004) Wire section Valmet OptiFormer LB (loadable blades) (2004) Press section Valmet SymPress B with 4th press (1990/2004) Shoe press in 3rd nip (2004) Drying section Valmet SymDry (1990) 4 single tier drying groups, 2 double tier drying groups Ropeless tail threading (1990/2004) CD weight control with dilution valves 2004, Metso DNA. Moisture profiling at press section with Measurex-Devron steambox 1992 (57 contro ...
Qty. 1 Second-hand Duplex board paper mill Mfc.: Hasegawa, Yodogawa, Fuyo Japan, Valmet, Finland, Kumsun, Chung Korea Buil: 1984 Width: 3400 mm Speed: 330 m/min. Productivity: 450 ton/day max. 350 ton/day (average) GSM: Max.500 g/m2 -The number of HEAD BOX: 7 sets -Fourdriner type -Dryer: 77 ea (Air type+Electric type)
used
Cylinder mill for very fine grinding, consisting of three pairs of cylinders, new machinery, stainless steel construction, never been used, complete with product feeder, three electric motor and hydraulic control unit
used
Used hammer mill made by Alpine, type B 630. Manufacturer's documentation.
used
Complete grain mill for sale for about 75 tons per day. Rollermills Bühler MDDK Plansifter MIAG LM The plant has been professionally dismantled. All machines have been overhauled. With switchgear and PLC control.
used
Polish roll mill 550 x 1500mm. Roll gap adjustment - motorized. Main motor power 90kW. Very good technical condition.
Mfc.: Hitachi Type: 6-Hi reversing mill Built: 1976 Shut down: 2014 Revamped: 2010 Control system – changed DC to AC motors Load cells were replaced in March 2005 & thickness gauge in March 2009 Roll coolant cooler was replaced in July 2009 Control boards of hydraulic screw down & electromagnetic valves were replaced in 2009. Strip width: 610 – 1330 mm Thickness Entry: 1.6-4.5 mm Exit: 0.15 – 2.3 mm
used
Table length: 670 mm Table width: 320 mm Longitudinal X: 320 mm Cross Y: 240 mm Vertical Z: 300 mm MACH-id 5175 MAKE VOLZ Germany TYPE EURO-MILL FUS 22 M YOP 2007 SPECIFICATIONS X-Axis 320 mm Y-Axis 240 mm Z-Axis 300 mm Table Length 670 mm Table Width 320 mm Table load in kG 75 Kg Stroke Pinole 60 mm Spindle taper iso 40 Mk/Bt/ISO/HSk Spindle speeds 2240 Rpm Feed rate X-Axis 630 mm/Min Feed rate Y-Axis 630 mm/Min Feed rat ...
used
Peforated disc mill Manufacturer: Fryma Type: ML 180 No.: M10451 Power: 7.5 kW with hopper (volume: ca. 100 l) with feed screw (speed-controlled) on mobile cart with control cabinet LWH: 800 x 700 x 2400 mm Weight: ca. 250 kg
used
Hammer Mill Manufactured by PESSA Model: MM-14R2000 Complete with main motor of 250 KW
used
Cutting mill Retsch SM 2000
used
GUANGZHOU PC2660S plastic mill was manufactured by Chinese granulator manufacturer Guangzhou 3E Machinery Co. in 2018. The structure of the cascade knife granulator is made of high quality steel, ensuring rigidity, high efficiency and long service life of the machine. The machine is equipped with a rotor (cutting knife arrangement) with a cascade layout, consisting of 3 rows of 6 knives each. The rotor is 600mm long, 600mm wide and has a diameter of 260mm. The moving knives operate at a speed of 607 rpm. The drive system has a massive drive wheel, and the drive is transmitted via V-belts to the rotor pulley. The total weight of the machine is 1060 kg. Technical parameters of granulator GUANGZHOU PC2660S - layout of cutting knives: cascade - number of rotor knives: 3 rows x 6 pcs. - number of stationary knives: 2 rows x 2 pcs. - rotor length: 600 mm - rotor width: 600 mm - rot ...
used
Perforated disc mill Manufacturer: Karl Schnell Type: 080 F 248 N°: 42942 Power: 55 kW with funnel and connector Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1550 mm Weight: approx. 600 kg
used
Perforated disc mill Manufacturer: Karl Schnell Type: 062-F28-248 N°: 42686 Power: 21 kW with funnel and discharge chute Control cabinet with on-off button Plug connection Diameter perforated disc: 6 mm Cutting knives as good as new LWH: 1000 x 900 x 1670 mm Weight: approx. 500 kg
used
Bead mill Manufacturer: Drais Type: PM 1 Factory number: 50215 Y.O.M.: 1980 Power: 0.75 kW in Ex-protection Power pump: 0.12 kW in Ex-protection very good condition Dimensions LWH: 800 x 500 x 850 mm Weight: approx. 100 kg
Gearbox TSA 031 370-1-07 Manufacturer VSS Kosice for mixing mill Buzuluk 660x2100 mm , Type 14821 for right side i = 10:1
used
For sale various grinding stones for corundum disc mill KORUMA
used
Stock - No. 2537 1 used,, functionally tested cutting mill/granulator Manufacturer: Alpine Hosokawa Type: RO 50 / 80 Built: 1993 Material feeding hopper: 500 x 840 mm Opening hydraulic Rotor diameter 500 mm x width 800 mm Rotor semi-open, 4 rotor V-cut - 2 Fixed blades Drive 55 kW Sieve diameter 10 mm Blower and Cyclone Throughput up to approx. 800 kg/h depending Material Machine is ready for demonstration from the Wuppertal plant, Date by appointment More granulators from stock ready to show, Ask for our current stock list or visit : plasticotrading
front roll 560x1500 for mixing mill Buzuluk 14823
rear roll 560x1500 for mixing mill Buzuluk 14823
used
MIXER, SCREW FEEDER, MILL, #3747
used
Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)
used
Colloid mill Manufacturer: Probst & Class (PUC) Type: N60/S Factory no.: 87079 Power: 2.2 kW 380 V with on-off button n=2825 rpm miti hopper, circulating line & three-way valve very good condition LWH: 700 x 300 x 740 mm
used
Bead mill Manufacturer: Fryma Type: MSZ-12 Factory no.: M12362 Pressure product space: 2.5 / 0.2 bar Pressure double jacket: 2.0 / 0.2 bar Power: 2.5 kW 380 V Machine in EEx protection Rotor speed controlled Feed pump speed-controlled with pressure & temperature gauge Grinding set as good as new Switchgear in EEx protection very good condition Weight: approx. 150 kg LWH: 700 x 600 x 750 mm
used
Used mill made by Comec, model MM-12. New 2014. Weight 650 kg, 12 L, 30 kW, 6 Bar, CE, Eex dIIB T4. Control panel.
new
Müro paper milling machine; Condition New; Makita machine; Connection to the milling head for suction.; for milling blocks; 5 pcs. available. Paper mill Müro; condition new; Makita nachine; connector at the milling head for dust suction; used for milling blocks; 5 pic. on stock.
used
used
Corundum stone mill Manufacturer: Fryma Type: MK-270 R Built: 1981 N°: F815198/9 Pressure working space: 1 bar Pressure double jacket: 10 bar with control cabinet with temp gauge with outlet chute various spare parts LWH: 1100 x 850 x 1700 mm
used
Laboratory bead mill Manufacturer: VMA Getzmann GmbH Type: Dispermat SL-C50 N°: 0819203 Built: 2003 as good as new with ceramic grinding set with control panel additional pump with user manual and documentation LWH: 670 x 700 x 370
used
Colloid mill Manufacturer: Probst & Class Type: N100E N°: 90028 Power: 5.5 kW Engine manufacturer: Loher with operating instructions various spare parts (piping, taps, etc.) LWH: 1150 x 400 x 800 mm
used
Corundum stone mill Manufacturer: Fryma Type: MMR-O N°: 166 with funnel & outlet Power: 12 hp with various grinding discs LWH: 500 x 500 x 1250 mm
Qty. 1 Second-hand complete 12-Hi reversing cold rolling mill incl. sand blast line Mfc.: Kobelco Type: 12-Hi reversing Built: 1986 Strip width: 900 – 1250 mm Thickness: Entry: 3.2 mm Exit: 0.4 mm Rolling speed: 120/300 m/min.