meter used for sale

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

Beschreibung: Die MARTINA Warmluftöfen stellen eine ideale Lösung für die Energieverwertung in holzverarbeitenden Industrie- und Handwerksbetrieben dar. Diese wurden zur Beheizung größerer Nutzflächen, wie Werkshallen und Arbeitsräumen von Handwerks- und Industriebetrieben, entwickelt. Diese Warmluftsysteme benötigen keine langen Aufheizphasen und erwärmen innerhalb kürzester Zeit die Werkshalle der Schreinerei oder Zimmerei sowie anderer Produktionsstätten. Als Brennmaterial dienen Massivholz und dessen Nebenprodukte, [...] Reste von Massivholzplatten, Späne, Sägemehl, Pellets oder Briketts. Die MARTINA- Warmluft- Öfen entsprechen der EU-Vorschrift 98/37CE italienisches Präsidialerlass NC459 vom 24. Juli 96 und der Sicherheitsrichtlinie der Anlage 89/392 CE. Alle Warmluft-Öfen der MARTINA-Serie  15 - 30 - 55 - 85 - 120 - 180 - 240 - 350 erfüllen beide Stufen der  ...

Beschreibung: Die MARTINA Warmluftöfen stellen eine ideale Lösung für die Energieverwertung in holzverarbeitenden Industrie- und Handwerksbetrieben dar. Diese wurden zur Beheizung größerer Nutzflächen, wie Werkshallen und Arbeitsräumen von Handwerks- und Industriebetrieben, entwickelt. Diese Warmluftsysteme benötigen keine langen Aufheizphasen und erwärmen innerhalb kürzester Zeit die Werkshalle der Schreinerei oder Zimmerei sowie anderer Produktionsstätten. Als Brennmaterial dienen Massivholz und dessen Nebenprodukte, [...] Reste von Massivholzplatten, Späne, Sägemehl, Pellets oder Briketts. Die MARTINA- Warmluft- Öfen entsprechen der EU-Vorschrift 98/37CE italienisches Präsidialerlass NC459 vom 24. Juli 96 und der Sicherheitsrichtlinie der Anlage 89/392 CE. Alle Warmluft-Öfen der MARTINA-Serie  15 - 30 - 55 - 85 - 120 - 180 - 240 - 350 erfüllen beide Stufen der  ...

Beschreibung: Die MARTINA Warmluftöfen stellen eine ideale Lösung für die Energieverwertung in holzverarbeitenden Industrie- und Handwerksbetrieben dar. Diese wurden zur Beheizung größerer Nutzflächen, wie Werkshallen und Arbeitsräumen von Handwerks- und Industriebetrieben, entwickelt. Diese Warmluftsysteme benötigen keine langen Aufheizphasen und erwärmen innerhalb kürzester Zeit die Werkshalle der Schreinerei oder Zimmerei sowie anderer Produktionsstätten. Als Brennmaterial dienen Massivholz und dessen Nebenprodukte, [...] Reste von Massivholzplatten, Späne, Sägemehl, Pellets oder Briketts. Die MARTINA- Warmluft- Öfen entsprechen der EU-Vorschrift 98/37CE italienisches Präsidialerlass NC459 vom 24. Juli 96 und der Sicherheitsrichtlinie der Anlage 89/392 CE. Alle Warmluft-Öfen der MARTINA-Serie  15 - 30 - 55 - 85 - 120 - 180 - 240 - 350 erfüllen beide Stufen der  ...

Beschreibung: Die MARTINA Warmluftöfen stellen eine ideale Lösung für die Energieverwertung in holzverarbeitenden Industrie- und Handwerksbetrieben dar. Diese wurden zur Beheizung größerer Nutzflächen, wie Werkshallen und Arbeitsräumen von Handwerks- und Industriebetrieben, entwickelt. Diese Warmluftsysteme benötigen keine langen Aufheizphasen und erwärmen innerhalb kürzester Zeit die Werkshalle der Schreinerei oder Zimmerei sowie anderer Produktionsstätten. Als Brennmaterial dienen Massivholz und dessen Nebenprodukte, [...] Reste von Massivholzplatten, Späne, Sägemehl, Pellets oder Briketts. Die MARTINA- Warmluft- Öfen entsprechen der EU-Vorschrift 98/37CE italienisches Präsidialerlass NC459 vom 24. Juli 96 und der Sicherheitsrichtlinie der Anlage 89/392 CE. Alle Warmluft-Öfen der MARTINA-Serie  15 - 30 - 55 - 85 - 120 - 180 - 240 - 350 erfüllen beide Stufen der  ...

-System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: CF 7000 / UCF 646-00-35 Power: 110 kW Year of construction: 2012 Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzun ...

Praezision tube Residual bestaend from the production of gas pressure cylinders Stainless steel, probably V2A or V4A Laenge each 6m The following dimensions should be available, exact quantities on request or on order. 3x20 7x23 4x28 1x40 Sale against bid either as a total length or by length or by meter Special price

Dosing with Endress and Hauser mass flow meter consisting of a cabinet (with Siemens plc and touch panel for dosage control and pneumatic valve Island) and two Endress and Hauser mass flow meters. Documentation including user's manual available

NEW! 400 L capacity all stainless steel with stirring system conical bottom with centrifugal pump with water meter power : 1,5 kW dimensions (l x w x h) : 1.200 x 700 x 1.500 mm

Plate filter Schenk Type Niro 1000 in V2A Capacity: 10.000 Liter/h for beer Capacity: 10.000 Liter /h Factory No. 154 Type Niro 1000 Year of construction 1996 Oper. Pressure: 8 bar Oper. Temperature: 115 °C Operating instructions available! with 70 Stainless steel plates hydraulic contact pressure with spar support with sight glass fittings with pressure fittings with manometer with Input / output valves with vent valve with Flow meter v. Sigrist Electrical Protection: IP 54 Voltage: 230/400 V – 50Hz Power: 1,5 kW Filter connections: Filtrate – inlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Filtrate-outlet: threaded connector DN 80/100 DIN 11851, material 1.4301 Emptying: DN 40 DIN 11851 thread material 4.4301 Vent: angle valve R1/4‘‘-DN8; material 1.4571 / PTFE Filter pl ...

Complete gas detector station / gas measuring device, Polytron IR Ex, used Manufacturer: Dräger Type: Polytron IR Ex Status: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 70 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron IR Ex - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFA6-SR2-Ex1.W - Circuit breaker and other accessories - Lütze Power suppy NGP 24/5-2741 The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we know that the system works pe ...

Complete gas measuring station / gas detector device, including Dräger Polytron 2 IR Ex 334 etc. used Manufacturer: Dräger Type: Polytron 2 IR Ex 334 Condition: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 110 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron 2 IR Ex 334 - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFD2-SR2-Ex1.W - 2 Pepperl u Fuchs KFD2-STC4-EX2 transmitter power supplies The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we  ...

REHEAT FURNACE Type: Walking Beam Incoming Billet: 160 x 160 mm x 8.300 – 12.000 mm Charge: Hot and Cold Discharging Temperature: 1150 Degr. Nominal Production 90 Ton/Hr Fuel: Natural Gas (LNG) Furnace inside dimensions: L x W 12.500 x 12.800 mm REBAR ROLLING MILL: Type: Housingless Stands Roughing Mill: 6 Stands Intermediate Mill: 6 Stands Finishing Mill: 6 Stands Horiz. Stands # 1,3,5,7,9,11,13,15,17 Vert. Stands # 2,4,6,8,10,12,14 Horiz./Vert Stands #16 and 18 CROP SHEAR No. 1 Head & Tail Cropping, Emergency Chopping Type: Crank Shear- Blade width 200 mm CROP SHEAR No. 2 Head & Tail Cropping, Emergency Chopping No. of Blades: 4- Blade width 180 mm DIVIDING SHEAR Cutting to multiple lengths COLD SHEAR Cutting to final length Shear type; CMC 0630 0950 No. of Blades: 2- Blade width 900 mm Product Length: 6-12 Meter (Standard)  ...

<b>Properties</b> Used pallet roller conveyor of the manufacturer of rack & roll GmbH Condition: Excellent condition with light wear Color: Silver Feet must be ordered separately Expertly disassembled and packed Pre-assembled on a length of 2,640 mm Including a drag reel per item Price per meter <b>Technical data Pallet roller conveyor dimensions approx.</b> Total length of an element: 2,640 mm Total width: 930 mm <b>Mass of the rollers and the frame about</b> Clamping length approx.: 835 mm Diameter approx.: 60mm Distance approx.: 150mm Material: Steel, galvanised Frame: 80x40mm Brake pulley diameter: 90 mm In stock: 140 metres <b>Pallet roller conveyor</b> Thanks to the superb craftsmanship of the pallet roller conveyor glides your material, even under high load, gently to the place of destination.  ...

used baler Manufacturer: PAAL Type: CPH 6540 Built: 2007 Main parts of the press: 1 automatic channel press 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force at approx. 300 bar: 650 kN Channel cross-section (h x w): 75 x 100 cm Filling opening (l x w): 160 x 92 cm Number of connecting wires: 4 pieces Binding: 4-fold horizontal Power: Main drive motor: 75 kW Wire pull: 3 kW Twisting: 3 kW Hydraulic oil tank volume: 2200 l Machine weight: 14 t, depending on equipment Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Press complete for continuous operation including: - Machine design consisting of: - printing plate with bearing roller guide at the bottom and inside, - Press box bottom made of highly wear-resistant special steel, - interchangeable, screwed tread irons for the lower plate rollers, - Doors ...

Roller conveyors, 50 and 58cm wide, - used - : Price / meter (net) from location: 65.-€, dismantled and loaded Matching curves 90 degrees: price 450.-€ (net) / piece Curves: approx. 40cm wide 90 degrees: price 350.-€ (net) / piece Price per foot: 50.-€ (net)! Manufacturer: Siemens Dematic Year built: unknown Type 1. approx. 50 to 100m Elementbriete: approx. 50cm Roll length approx. 43cm Roll width: approx. 5cm Roller spacing: approx. 6cm Element length: mainly 3m - but also some shorter pieces Type 2: - approx. 40m Elementbriete: approx. 58cm Roll length approx. 53cm Roll width: approx. 5cm Roller spacing: approx. 2cm Element length: 2m / 2.56m / 3m Condition: good Available: now Location: Frankenberg Camp (Saxony)

New machine Stainless steel model 24-month warranty Benefits: + very good value for money + Machine is completely in stainless steel (also the collecting bowl) + Chocolate rasp in uniform thickness (0.1 - 3 mm thick) + rattles 2 chocolate blocks (up to 2.5 kg each) + easy to use + hygienic, easy to clean and keep clean + Drive meter can be replaced separately + with speed regulation Technical data: - suitable for 2 blocks of chocolate (up to 2.5 kg each), - Dimensions for chocolate blocks (min - max): --- width: 17 - 40 mm --- depth: 145 - 210 mm --- height: 40 - 330 mm - Device dimensions: 393 x 370 x 638 mm (WxDxH) - Engine power: 90 W - Connection values: 230V - 1Ph - 50Hz - Net weight: 30 kg

Description Brand Kett Model Riceter J301 ID 7328 Status Active Price 500 € + VAT Location Oradea (RO) Handheld Portable Moisture Tester - Rice, Wheat, Barley, Oats. The largest selling moisture meter in the world, the Riceter sets the standard for handheld grain testers. To operate, place several grains of rice, wheat, barley or oats in the sample holder. Insert the holder and twist the integrated grinder. The sample is measured using the capacitance circuit and the moisture percentage is displayed on the bright red LED. Testing takes less than five seconds, allowing for rapid analysis of many samples. There is up to nine consecutive measurements that can be displayed and averaged. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs be ...

Description Brand CAME Model G6000 ID 7332 Status Active Price 500 € + VAT Location Oradea (RO) Road barrier CAME G6000. Length: 6 meter. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Schlumberger FM8N , horizontal rubbing frame, 20 spindles, manual doffing, year 1996. 355mm pitch, 2 rovings per bobbin, input 12 to 15 ktex according to the material, roving weight 0.66 -5.5Nm, draft 9 to 26 by gear box, nsc double apron drafting, draft apron 145 mm wide, rubbing speed 1200 cycles /min maximum, number rubs 5 to 8 per meter, 300mm bobbin, delivery speed up to 220meters/min.

Conductive transmitter; Conductivity meter for bottle cleaning machines. Used from warehouse dissolution. Very good condition see photos

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Whale 36/210, 43/180 or 55/160, similar but no workday & fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Whale 36/210 | 36l/min. at 210bar | Engine: Honda GX630 14.7kW Whale 43/180 | 43l/min. at 180bar | Engine: Honda GX630 14.7kW Whale 55/160 | 55l/min. at 160bar | Engine: Honda GX690 17.7kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 650x1.000x1.030 mm Empty weight without water tank: approx. 250 kg Dimensions and unladen weight with 300 l water tank: approx. 1,160x1,000x1,030 mm and approx. 280 kg Dimensions and unladen weight with 500 l water tank: approx. 1,260x1,000x1,030 mm and appr ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Salmon 60/200 and 75/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Salmon 60/200 | 60l/min. at 200bar | Engine: Vanguard 35 HP 26kW Salmon 75/150 | 75l/min. at 150bar | Engine: Vanguard 35 HP 26kW DIMENSIONS / WEIGHT: Dimensions without water tank LxWxH: approx. 700x1.250x1.200 mm Dimensions with 400l water tank LxWxH: approx. 1.300x1.250x1.200 mm Dimensions with 800l water tank LxWxH: approx. 2,000x1.250x1.200 mm Empty weight without water tank: approx. 300 kg Empty weight with 400l water tank: approx. 320 kg Empty weight with 800l water tank: approx. 350 kg HIGH-PRESSURE PUM ...

Image amplifier with 23cm, 2 x TFT monitors with 50 Hz  Usb Laser crosshairs 1,000 image memory Patien Management (Road Map) built-in dose area meter Resolution 1.2 - 1.4 Lp/m Refurbished

KRONES Air conveyors used- in very good condition Price: Euro 475,-- / per meter Complete with cable, stand, motor

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW TIER III Moses 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW TIER III Moses 30/300 | 30l/min. at 300bar | Engine: Kohler KDW 1404 26kW TIER III Moses XL 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW TIER III Moses XL 50/30 ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frame with forklift load suitable for installation in company vehicles. PTC Dolphin 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Dolphin 75/210 | 75l/min. at 210bar Dolphin 84/190 | 84l/min. at 190bar Dolphin 102/150 | 102l/min. at 150bar DIMENSIONS / WEIGHT: Dimensions and weight without water tank LxWxH: approx. 1,240 x 1,300 x 1,300 mm, approx. 650 kg Dimensions and weight with 500 l water tank: approx. 1,850 x 1,300 x 1,300 mm, approx. 580 kg Dimensions and weight with 800 l water tank: approx. 1,950 x 1,300 x 1,300 mm, approx. 620 kg Dimensions and weight with 1000 l water tank: approx. 2,020 x 1,300 x 1,300 mm, approx. 640 kg  ...

High-pressure cleaning device, high-pressure rinsing, high-pressure washer on hot-dip galvanized and painted high-quality steel frames with forklift slacks. PTC Tornado 60/200, 75/150, 75/210, 84/190 and 102/150 similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Tornado 60/200 | 60l/min. at 200bar | Engine: Kohler KDW 1404 26kW Tornado 75/150 | 75l/min. at 150bar | Engine: Kohler KDW 1404 26kW Tornado 75/210 | 75l/min. at 210bar | Engine: Kohler KDW 2204 37.5kW Tornado 84/190 | 84l/min. at 190bar | Engine: Kohler KDW 2204 37.5kW Tornado 102/150 | 102l/min. at 150bar | Engine: Kohler KDW 2204 37.5kW DIMENSIONS / WEIGHT: Dimensions and weight with 680l water tank LxWxH: approx. 2.300x1.310x1.310 mm, approx. 640 kg Dimensions and weight with 1000l water tank LxWxH: approx. 2.300x1.310x1.630 mm, approx.  ...

High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...

pressure:400 t passage width:600 mm stroke:400 mm Weight of machine approx.:14 t dimensions:2380 x 1680 x 3580 mm Engine Output:36 kW Max Working height:750 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec column diameter:230 mm Return Capacity:40 t speed rapid traverse:25 mm/sec Travel:500 mm Oil Tank Capacity:600 l Oil Cooling:1,5 kW :6 m Monitor:WEG 12 Zoll :6800 ? :4200 ? Speed increase to 80 mm/sec.:19000 ? every additional meter conveyor belt:850 ? Faster Version with approach and working speed at 60mm/sec ist available on request. Price (excl. options): 117.500,--

pressure:300 t passage width:600 mm stroke:500 mm Weight of machine approx.:8,5 t dimensions:ca. 2275 x 1650 x 4050 mm Return Capacity:30 t Engine Output:30 kW Max Working height:800 mm Approaching Speed max. :10 mm/sec Pressure Speed:10 mm/sec Travel:500 mm Ram plate:600 x 600 mm Table size:600 x 600 mm Table height above ground level (approx.):850 mm Oil Tank Capacity:350 l Oil cooling (electric):1,5 kW (max) ejector stroke:250 mm pressure of ejector:50 t Maintenance Balcony:2.800 ? Drip pan to prevent oil spil:2.800 ? Upper and lower tooling (for 8kgs salt stone):11.000 ? automatic filling with 500 kg depot:58.000 ? speed increase to 80 mm/sec:19.000 every additional meter conveyor belt:850 ? Light barriers front and back:6.800 ? Side trim:4.200 ? 7m roller coaster-for salt stone transport and interim storage:12.900 ? Faster Version with approach and working speed at 60mm/sec ist avai ...

<b>Features:</b> Used pallet roller conveyor Condition: Top condition with slight traces of use Material: steel (galvanized) Color: galvanized Professionally dismantled and packaged 10 pieces in stock Price per meter <b>Technical data</b> Manufacturer: Euroroll Condition: Used Colour: galvanised Total length: 2.520mm Removal length: 1,300mm Roller track length: 1.220mm Frame: steel/galvanized Height: 80mm Width: 40mm Incl. 2 brake rollers Diameter: 80mm Pallet namhe and feed element by forklift <b>Pallet roller conveyor</b> Thanks to the excellent workmanship of the pallet roller web, your material glides gently to its destination, even under high loads. <b>Tailor-made logistics for your intralogistics</b> We are your competent contact for roller conveyors, belt conveyors, inclined conveyors o ...

Belimed WD290 washing and disinfection machine List price: € 52,616.00 net per system WD290 Washing and disinfection machine for machine instrument preparation Automatic washroom door made of double-walled safety laminated glass only in two-door design Applications: Surgical instruments Minimally invasive instruments Conatiner Surgical shoes Laboratory equipment Specifications Features / Components WD 290 Heat emission freestanding 1000 (+/- 200) W Weight with side panel 384 Kg Noise value with side paneling 62 dB(A) Door opens automatically from top to bottom with safety shutdown switch list Material: Frame cladding chrome nickel steel 1.4301, AISI = 304 Material: Washing chamber and door chrome nickel steel 1.4404, AISI 316L Wall thickness wash chamber 1.5 mm Washing pump nominal pump pump capacity 900 l / min Washing pump pump pump operating power op ...

Screw compressor Manufacturer Rota Rotorkomp Compressor Drive power 11KW Operating pressure 11 bar Operating pressure maximum 15 bar Operating hours according to the meter 2,035 hrs. Without compressed air boiler Device ready to be demonstrated under power

Sell a Thermovac TM21 vacuum meter with high vacuum sensor according to Pirani. (measuring range 500 bar to 1000mBar)

Meltshop Consists of: 1. 70 Ton EAF (Electric Arc Furnace) • revamped in 2009 by SMS-CONCAST; • Type AC, Shell Type EBT, diam. 5.400 mm; • Tap weight 63 Ton; • Tap-to-Tap-Time 42 Min; • 100% Scrap Charge; Electrode diam. 550 mm; • Electrode Regulation; • Upper Shell Water-Cooled Panels (Steel + Cu); • Arms design Conductive (copper cladded); • Scrap charge with 3 buckets 2. 65 Ton LF (Ladle Furnace) TAGLIAFERRI”; Tap Time 42 Min. 3. MATERIAL HANDLING SYSTEM, Conveyors and Hoppers 4. CONTINUOUS BILLET CASTER STS” revamped in 2008; • 4-Strands; • 5 meter Radius; • Billets 130 x 130 mm; • Automatic start and mould level control; • Oscillation with AC motors and variable oscillation frequency; • Water automation of primary and secondary circuits; • Heavy Duty Straighteners; • Upgraded roller table and tra ...

Ø grinding wheel dimensions (od x id x width): Ø 650 x Ø 304,8 x 500mm, Ø min / max to grinding: 3/200 mm, Peripheral grinding wheel speed (m / s): Variable with regulator, Regulating wheel width: 500 mm, Regulating wheel speed nº: Infinite, Dressing (auto / manual): Automatic CNC the 2 grinding wheels, Min / max regulating wheel speed (r.p.m.): 10/255 r.p.m., Lubrication (auto / manual): Automatic, Control type ((cnc / manual): CNC, Cnc axes nº: 8, Infeed (auto / manual): Automatic, Diamond dressing speed: 255 r.p.m., Regulating wheel dimensions (od x id x width): Ø 350 x Ø 203,2 x 500mm, Grinding wheel width: 500 mm, Maximum infeed grinding length: 500 mm, Motor power grinding wheelhead: 75 Kw, Power hydraulic motor: 3 Kw, Accessories included: Fairing, rule holder and plongeé, MARPOSS E50 meter, speed regulator. grinding wheel work, Total power: 90 Kw, Voltage: 220 / 380V, Lo ...

Mixing vessel Company: Bäuchle & Sohn N°: 2193/1/2 Built: 1987 Double jacket pressure: 3 bar (insulated) Indoor and outdoor temperature: 150°C Content: max. 400 l min. 50 l Wiper agitator, speed-controlled Jet-flow agitator with 2 stages Temp meter, switchgear Dimensions LWH: 1100 x 970 x 2220 mm Weight: approx. 600 kg

Stephan UMHC403E-GNi Pilot Universal Machine with control cabinet Double jacket Steam injection nozzles Knife insert Lid with pressure-resistant closure Feeder containers Steam transfer station Outlet on the boiler electrically driven stirring blade 3 Speeds Machine tiltable Safety device on the lid not functional, machine runs with the lid open Sight glass of the flow meter at the rear of the control cabinet defective Machine should be repainted and overhauled Voltage 400V Fuse: 32A Machine must in any case be thoroughly cleaned before use Video about test run and further pictures available

Technibag B BOOSTER Bag in box filler Fully automatic filling machine for soft bags and / or POUCHS (stand-up bags) Carton format: 2 L to 20 L Description of the machine: Measures and weight: Length: 1880 mm Width: 1130 mm Height: 2100 mm Weight: 370 kg Liquid flow rate: 80 hl / h - Connection: diameter 40 Macon Compressed air supply: 7 to 10 b - flow: 7m3 / h. Connection Type Rectus 26 Nitrogen supply: 1 to 4 b-flow: 1m3 / h. Connection Type Rectus 26 Power supply: 400v - 3p + neutral (N) + earth (E) - power 0.7 Kw Pulse counter: Electromagnetic counters Noise emission:

M.Bäuerle CAS 52/4 Art; Online folding machine with H+H feeder; 4 folding pockets; 3x Ionosation; Investment table 150cm; Max inlet width 520mm; may also be operated with other investors or upstream systems; Meter reading 4.5 million Online folding system M.Bäuerle CAS 52/4 Art; with feeder H+H; 4 pockets; 3x ionization; feed table 150cm; max.width 520mm; ca be used with other feeders or systems; counter only 4.5 mio.

Kramatorsk KJ 1910 10-meter boring depth - Heavy duty: 25-ton workpiece >>> NOTE: MACHINE IS IN OUR WAREHOUSE IN ITALY < < < Heavy duty: Max. work-piece weight 25 tons Spindle motor kW 85 Counter rotation motor 90kW Spindle hole diameter mm 700 Max. boring diameter, mm 600 Center height over the bed, mm 670 Max. work piece external diameter, mm 1300 Work piece length range on one-sided machining, mm 1000...10000 Work piece diameter range, mm: - in chuck of faceplate 200...1100 - in open rest 400...900 - in closed rest 200...630 - in round rest 250...550 Spindle speeds range, rpm 2...200 Machine overall dimensions, approx mtrs 31 x 3 x 2,3 Machine weight, kg 90000 (approx)

Roller conveyors, Dematic, driven, approx. 1.30m wide, approx. 65m, - used - Price per meter (net) from location: 95.-€, dismantled and loaded! Manufacturer: Dematic Built: 2004 / 2013 Type: Roller conveyor Dimensions: Element width: approx. 1.30m Element length: approx. 1m = 2 Element length: approx. 1.23m = 1 Element length: approx. 1.25m = 4 Element length: approx. 1.62 = 2 Element length: approx. 2m = 2 Element length: approx. 2.06m = 1 Element length: approx. 2.36m = 8 Element length: approx. 2.44m = 8 Element length: approx. 2.74m = 1 Element length: approx. 2.87m = 2 Element length: approx. 3m = 8 Roll length: approx. 1.24m Roll width: approx. 5cm Distance between rolls: different e.g. 1cm, approx. 7cm Height: about 13cm Condition: good Available: now Location: Zwickau, later Frankenberg camp (Saxony)

Juice mixer, juice mixing plant. Fruit juice bottling Beverage mixing plant used. Manufacturer: Füllpack GmbH (Gea Group) Model: Fuellmix-MB Elo Filling Mix MB PLC S7 and Monitor Visualization Fuellpack Mixer 2 / Mixing plant 2 Power approx. 7000 - 15000 l/h Including Fischer-Porter flow meter; Valves, pumps, Panel Documents available Dimensions 2800 x 2100 x 2100 mm

properties: Used pallet roller conveyor from the manufacturer Bito Condition: Top condition with slight signs of use Color: gray Specialist dismantled and packaged Stock 177meters Price per meter Technical Data Plant consists of 73 segments 63 segments x 2.495mm 10 segments x 1.990mm Total width: 880 mm Conveyor width: 870 mm Axle distance: 95 mm Roller cross-section: 60 mm Material: steel, galvanized Height frame: 110 mm There are 3-4 brake rollers per segment. Roll diameter: 80mm pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to  ...

maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.

maximum load capacity with horizontal planing disc 60 tons, maximum load with vertical planboard 90° at a load center of one meter 30 tons – with a load center of two meters 19 tons.

OERLIKON / ALPHATOME II T30 HP300 PPM 400 OERLIKON - Typ: ALPHATOME II T30 HP300 PPM 400 - Baujahr: à 2013. Special features of the ALPHATOME II series / EQUIPMENT: Camera system: Moving camera on the cross-drive carriage for easy positioning and cutting monitoring by the operator from the control panel. The graphic is done by a permanently visible button on the touch screen interface. Protective devices: 7 Facilities for the protection of operating personnel. Photocells in the front and back of the bridge. Emergency stop button on all corners, as well as on the external control panel. Anti-glare-/splash protection: The anti-glare panel of the bridge is raised or lowered automatically or by pressing a button. On the sides, the panel can be opened manually for the burner and wear parts. Furthermore, the noise development is significantly reduced and resulting smoke is bet ...

Horizontal CNC drilling and milling machine make PFEIFER type F 105 CNCFabr. -No: 2399, built in 1991Technical specifications:Travel X: 1600 mmY: 1000 mmZ: 1000 mmSpindle diameter: 105 mmSpindle mount: ISO 50Quill stroke: 500 mmDistance from the center of the spindle to the clamping surface: 0 - 1000 mmmax.workpiece weight: 4000 kgSlewing ring diameter: 830 mmClamping area: 1000 x 1200 mmTable height above floor: 875 mmExternal dimensions: 4830 x 3040 x 2700 mmWeight: 10850 kgwith- Control Heidenhain TNC 355- Measuring device actual value display X, Y, Z, W- hydr. Clamping- automatic central lubrication- Liquid cooling device- Ball screws X, Y, Z, W- fixators- Ampere meter- oil cooling- electr. HR 250 handwheel- mech. Hand crossused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not bi ...

CNC EDM machine make INGERSOLL type IC 263Machine -No: 571304 built in 1988Table surface: 1000 x 525 mmMax. Workpiece nominal load: 2500 kgTravel X: 700 mmTravel Y: 400 mmQuill stroke Z: 400 mmmin / max. Distance table - quill: 350/750 mmTool carrier dimensions: 350 x 310 mmMeasurement resolution: 0.001 mmPlanetary radius mx.:5 mmPinole diameter: 220 mmMax. Head load: 1500 kgRecommended erosion load limit: 1000 kgFeed rate max .: 600 mm / minDimensions of the working container: 1300 x 750 x 550 mmCapacity: 535 lTotal Dilektrium: 750 lVolume of flushing pump: 25 l / minDelivery volume of filling pump: 200 l / minConnected load: 9.5 kVAConnection voltage: 380 V / 3 Ph / 50 HzOutside dimensions of the generator: 1950 x 2260 x 2900 mmWith- Generator M 60 DC 5 kVA- electrical meter f.d. Eroding the quill- Dialog DC-CNC planetary control PLT TVxa0xa0xa0(Dialog Color Graphic)- sep. Supply unit  ...